diff mbox

[GIT] Networking

Message ID 20110108121726.GA2216@electric-eye.fr.zoreil.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Francois Romieu Jan. 8, 2011, 12:17 p.m. UTC 
r8169: delay phy init until device opens.

It workarounds the 60s firmware load failure timeout for the
non-modular case.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

David Miller Jan. 10, 2011, 2:15 a.m. UTC | #1 
From: Francois Romieu <romieu@fr.zoreil.com>
Date: Sat, 8 Jan 2011 13:17:26 +0100

> r8169: delay phy init until device opens.
> 
> It workarounds the 60s firmware load failure timeout for the
> non-modular case.
> 
> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

Applied, thanks.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 27a7c20..dd758cd 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -3069,15 +3069,6 @@  rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		rtl8168_driver_start(tp);
 	}
 
-	rtl8169_init_phy(dev, tp);
-
-	/*
-	 * Pretend we are using VLANs; This bypasses a nasty bug where
-	 * Interrupts stop flowing on high load on 8110SCd controllers.
-	 */
-	if (tp->mac_version == RTL_GIGA_MAC_VER_05)
-		RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
-
 	device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
 
 	if (pci_dev_run_wake(pdev))
@@ -3127,6 +3118,7 @@  static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 static int rtl8169_open(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
 	struct pci_dev *pdev = tp->pci_dev;
 	int retval = -ENOMEM;
 
@@ -3162,6 +3154,15 @@  static int rtl8169_open(struct net_device *dev)
 
 	napi_enable(&tp->napi);
 
+	rtl8169_init_phy(dev, tp);
+
+	/*
+	 * Pretend we are using VLANs; This bypasses a nasty bug where
+	 * Interrupts stop flowing on high load on 8110SCd controllers.
+	 */
+	if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+		RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
+
 	rtl_pll_power_up(tp);
 
 	rtl_hw_start(dev);
@@ -3171,7 +3172,7 @@  static int rtl8169_open(struct net_device *dev)
 	tp->saved_wolopts = 0;
 	pm_runtime_put_noidle(&pdev->dev);
 
-	rtl8169_check_link_status(dev, tp, tp->mmio_addr);
+	rtl8169_check_link_status(dev, tp, ioaddr);
 out:
 	return retval;