| Message ID | 20091219021001.2745.833.stgit@savbu-pc100.cisco.com |
|---|---|
| State | Superseded, archived |
| Delegated to: | David Miller |
| Headers | show |
On Fri, Dec 18, 2009 at 06:10:02PM -0800, Scott Feldman wrote: > enic: feature add: add ethtool -c/C support > > > > Signed-off-by: Scott Feldman <scofeldm@cisco.com> > Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> > --- > drivers/net/enic/enic.h | 2 + > drivers/net/enic/enic_main.c | 83 +++++++++++++++++++++++++++++++++++++++++- > drivers/net/enic/enic_res.c | 12 ++++-- > drivers/net/enic/vnic_enet.h | 5 +++ > drivers/net/enic/vnic_intr.c | 8 ++++ > drivers/net/enic/vnic_intr.h | 2 + > 6 files changed, 104 insertions(+), 8 deletions(-) > > diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h > index b09b091..68d7a66 100644 > --- a/drivers/net/enic/enic.h > +++ b/drivers/net/enic/enic.h > @@ -93,6 +93,8 @@ struct enic { > unsigned int mc_count; > int csum_rx_enabled; > u32 port_mtu; > + u32 rx_coalesce_usecs; > + u32 tx_coalesce_usecs; > > /* work queue cache line section */ > ____cacheline_aligned struct vnic_wq wq[ENIC_WQ_MAX]; > diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c > index 2708ecf..664d132 100644 > --- a/drivers/net/enic/enic_main.c > +++ b/drivers/net/enic/enic_main.c > @@ -262,7 +262,81 @@ static void enic_set_msglevel(struct net_device *netdev, u32 value) > enic->msg_enable = value; > } > > -static const struct ethtool_ops enic_ethtool_ops = { > +static int enic_get_coalesce(struct net_device *netdev, > + struct ethtool_coalesce *ecmd) > +{ > + struct enic *enic = netdev_priv(netdev); > + > + ecmd->tx_coalesce_usecs = enic->tx_coalesce_usecs; > + ecmd->rx_coalesce_usecs = enic->rx_coalesce_usecs; > + > + return 0; > +} > + > +static int enic_set_coalesce(struct net_device *netdev, > + struct ethtool_coalesce *ecmd) > +{ > + struct enic *enic = netdev_priv(netdev); > + u32 tx_coalesce_usecs; > + u32 rx_coalesce_usecs; > + > + /* Only rx-usecs and tx-usecs can be set */ > + if (ecmd->rx_max_coalesced_frames || ecmd->rx_coalesce_usecs_irq || > + ecmd->rx_max_coalesced_frames_irq || > + ecmd->tx_max_coalesced_frames || ecmd->tx_coalesce_usecs_irq || > + ecmd->tx_max_coalesced_frames_irq || > + ecmd->stats_block_coalesce_usecs || > + ecmd->use_adaptive_rx_coalesce || ecmd->use_adaptive_tx_coalesce || > + ecmd->pkt_rate_low || > + ecmd->rx_coalesce_usecs_low || ecmd->rx_max_coalesced_frames_low || > + ecmd->tx_coalesce_usecs_low || ecmd->tx_max_coalesced_frames_low || > + ecmd->pkt_rate_high || > + ecmd->rx_coalesce_usecs_high || > + ecmd->rx_max_coalesced_frames_high || > + ecmd->tx_coalesce_usecs_high || > + ecmd->tx_max_coalesced_frames_high || > + ecmd->rate_sample_interval) > + return -EINVAL; This seems rather verbose. Does it really matter if there is junk in other ecmd fields? They seem to be otherwise ignored. Removing the check above would seem to be consistent with other enic_set_*() functions. > + > + tx_coalesce_usecs = min_t(u32, > + INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX), > + ecmd->tx_coalesce_usecs); > + rx_coalesce_usecs = min_t(u32, > + INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX), > + ecmd->rx_coalesce_usecs); > + > + switch (vnic_dev_get_intr_mode(enic->vdev)) { > + case VNIC_DEV_INTR_MODE_INTX: > + if (tx_coalesce_usecs != rx_coalesce_usecs) > + return -EINVAL; > + > + vnic_intr_coalescing_timer_set(&enic->intr[ENIC_INTX_WQ_RQ], > + INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs)); > + break; > + case VNIC_DEV_INTR_MODE_MSI: > + if (tx_coalesce_usecs != rx_coalesce_usecs) > + return -EINVAL; > + > + vnic_intr_coalescing_timer_set(&enic->intr[0], > + INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs)); > + break; > + case VNIC_DEV_INTR_MODE_MSIX: > + vnic_intr_coalescing_timer_set(&enic->intr[ENIC_MSIX_WQ], > + INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs)); > + vnic_intr_coalescing_timer_set(&enic->intr[ENIC_MSIX_RQ], > + INTR_COALESCE_USEC_TO_HW(rx_coalesce_usecs)); > + break; > + default: > + break; > + } > + > + enic->tx_coalesce_usecs = tx_coalesce_usecs; > + enic->rx_coalesce_usecs = rx_coalesce_usecs; > + > + return 0; > +} > + > +static struct ethtool_ops enic_ethtool_ops = { > .get_settings = enic_get_settings, > .get_drvinfo = enic_get_drvinfo, > .get_msglevel = enic_get_msglevel, > @@ -279,6 +353,8 @@ static const struct ethtool_ops enic_ethtool_ops = { > .set_sg = ethtool_op_set_sg, > .get_tso = ethtool_op_get_tso, > .set_tso = enic_set_tso, > + .get_coalesce = enic_get_coalesce, > + .set_coalesce = enic_set_coalesce, > .get_flags = ethtool_op_get_flags, > .set_flags = ethtool_op_set_flags, > }; > @@ -364,12 +440,12 @@ static void enic_mtu_check(struct enic *enic) > u32 mtu = vnic_dev_mtu(enic->vdev); > > if (mtu && mtu != enic->port_mtu) { > + enic->port_mtu = mtu; > if (mtu < enic->netdev->mtu) > printk(KERN_WARNING PFX > "%s: interface MTU (%d) set higher " > "than switch port MTU (%d)\n", > enic->netdev->name, enic->netdev->mtu, mtu); > - enic->port_mtu = mtu; > } > } This hunk seems unrelated to the rest of the patch. Am I missing something? > @@ -1972,6 +2048,9 @@ static int __devinit enic_probe(struct pci_dev *pdev, > goto err_out_dev_deinit; > } > > + enic->tx_coalesce_usecs = enic->config.intr_timer_usec; > + enic->rx_coalesce_usecs = enic->tx_coalesce_usecs; > + It looks like there is an space after = > netdev->netdev_ops = &enic_netdev_ops; > netdev->watchdog_timeo = 2 * HZ; > netdev->ethtool_ops = &enic_ethtool_ops; > diff --git a/drivers/net/enic/enic_res.c b/drivers/net/enic/enic_res.c > index a605da1..02839bf 100644 > --- a/drivers/net/enic/enic_res.c > +++ b/drivers/net/enic/enic_res.c > @@ -66,9 +66,9 @@ int enic_get_vnic_config(struct enic *enic) > GET_CONFIG(wq_desc_count); > GET_CONFIG(rq_desc_count); > GET_CONFIG(mtu); > - GET_CONFIG(intr_timer); > GET_CONFIG(intr_timer_type); > GET_CONFIG(intr_mode); > + GET_CONFIG(intr_timer_usec); > > c->wq_desc_count = > min_t(u32, ENIC_MAX_WQ_DESCS, > @@ -88,15 +88,17 @@ int enic_get_vnic_config(struct enic *enic) > max_t(u16, ENIC_MIN_MTU, > c->mtu)); > > - c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer); > + c->intr_timer_usec = min_t(u32, > + INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX), > + c->intr_timer_usec); > > printk(KERN_INFO PFX "vNIC MAC addr %pM wq/rq %d/%d\n", > enic->mac_addr, c->wq_desc_count, c->rq_desc_count); > printk(KERN_INFO PFX "vNIC mtu %d csum tx/rx %d/%d tso/lro %d/%d " > - "intr timer %d\n", > + "intr timer %d usec\n", > c->mtu, ENIC_SETTING(enic, TXCSUM), > ENIC_SETTING(enic, RXCSUM), ENIC_SETTING(enic, TSO), > - ENIC_SETTING(enic, LRO), c->intr_timer); > + ENIC_SETTING(enic, LRO), c->intr_timer_usec); > > return 0; > } > @@ -303,7 +305,7 @@ void enic_init_vnic_resources(struct enic *enic) > > for (i = 0; i < enic->intr_count; i++) { > vnic_intr_init(&enic->intr[i], > - enic->config.intr_timer, > + INTR_COALESCE_USEC_TO_HW(enic->config.intr_timer_usec), > enic->config.intr_timer_type, > mask_on_assertion); > } > diff --git a/drivers/net/enic/vnic_enet.h b/drivers/net/enic/vnic_enet.h > index 6332ac9..8eeb675 100644 > --- a/drivers/net/enic/vnic_enet.h > +++ b/drivers/net/enic/vnic_enet.h > @@ -20,6 +20,10 @@ > #ifndef _VNIC_ENIC_H_ > #define _VNIC_ENIC_H_ > > +/* Hardware intr coalesce timer is in units of 1.5us */ > +#define INTR_COALESCE_USEC_TO_HW(usec) ((usec) * 2/3) > +#define INTR_COALESCE_HW_TO_USEC(usec) ((usec) * 3/2) > + > /* Device-specific region: enet configuration */ > struct vnic_enet_config { > u32 flags; > @@ -30,6 +34,7 @@ struct vnic_enet_config { > u8 intr_timer_type; > u8 intr_mode; > char devname[16]; > + u32 intr_timer_usec; > }; > > #define VENETF_TSO 0x1 /* TSO enabled */ > diff --git a/drivers/net/enic/vnic_intr.c b/drivers/net/enic/vnic_intr.c > index 1f8786d..3934309 100644 > --- a/drivers/net/enic/vnic_intr.c > +++ b/drivers/net/enic/vnic_intr.c > @@ -50,12 +50,18 @@ int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, > void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, > unsigned int coalescing_type, unsigned int mask_on_assertion) > { > - iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer); > + vnic_intr_coalescing_timer_set(intr, coalescing_timer); > iowrite32(coalescing_type, &intr->ctrl->coalescing_type); > iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion); > iowrite32(0, &intr->ctrl->int_credits); > } > > +void vnic_intr_coalescing_timer_set(struct vnic_intr *intr, > + unsigned int coalescing_timer) > +{ > + iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer); > +} > + > void vnic_intr_clean(struct vnic_intr *intr) > { > iowrite32(0, &intr->ctrl->int_credits); > diff --git a/drivers/net/enic/vnic_intr.h b/drivers/net/enic/vnic_intr.h > index 9a53604..0c1e094 100644 > --- a/drivers/net/enic/vnic_intr.h > +++ b/drivers/net/enic/vnic_intr.h > @@ -101,6 +101,8 @@ int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, > unsigned int index); > void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, > unsigned int coalescing_type, unsigned int mask_on_assertion); > +void vnic_intr_coalescing_timer_set(struct vnic_intr *intr, > + unsigned int coalescing_timer); > void vnic_intr_clean(struct vnic_intr *intr); > > #endif /* _VNIC_INTR_H_ */ > > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Thanks for the review comments Simon. On 12/19/09 2:10 AM, "Simon Horman" <horms@verge.net.au> wrote: > On Fri, Dec 18, 2009 at 06:10:02PM -0800, Scott Feldman wrote: >> + /* Only rx-usecs and tx-usecs can be set */ >> + if (ecmd->rx_max_coalesced_frames || ecmd->rx_coalesce_usecs_irq || >> + ecmd->rx_max_coalesced_frames_irq || >> + ecmd->tx_max_coalesced_frames || ecmd->tx_coalesce_usecs_irq || >> + ecmd->tx_max_coalesced_frames_irq || >> + ecmd->stats_block_coalesce_usecs || >> + ecmd->use_adaptive_rx_coalesce || ecmd->use_adaptive_tx_coalesce || >> + ecmd->pkt_rate_low || >> + ecmd->rx_coalesce_usecs_low || ecmd->rx_max_coalesced_frames_low || >> + ecmd->tx_coalesce_usecs_low || ecmd->tx_max_coalesced_frames_low || >> + ecmd->pkt_rate_high || >> + ecmd->rx_coalesce_usecs_high || >> + ecmd->rx_max_coalesced_frames_high || >> + ecmd->tx_coalesce_usecs_high || >> + ecmd->tx_max_coalesced_frames_high || >> + ecmd->rate_sample_interval) >> + return -EINVAL; > > This seems rather verbose. Does it really matter if there is junk in other > ecmd fields? They seem to be otherwise ignored. Removing the check above > would seem to be consistent with other enic_set_*() functions. Ya, we can do that. >> if (mtu && mtu != enic->port_mtu) { >> + enic->port_mtu = mtu; >> if (mtu < enic->netdev->mtu) >> printk(KERN_WARNING PFX >> "%s: interface MTU (%d) set higher " >> "than switch port MTU (%d)\n", >> enic->netdev->name, enic->netdev->mtu, mtu); >> - enic->port_mtu = mtu; >> } >> } > > This hunk seems unrelated to the rest of the patch. > Am I missing something? Oops, that change snuck in there. That line got moved due to some backward compat changes, which have been stripped away, so it looks like that line is moving for no reason. It's a benign change so let's make the change to be consistent with our internal code base. >> + enic->tx_coalesce_usecs = enic->config.intr_timer_usec; >> + enic->rx_coalesce_usecs = enic->tx_coalesce_usecs; >> + > > It looks like there is an space after = Got it. -scott -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sat, Dec 19, 2009 at 11:33:54AM -0800, Scott Feldman wrote: > Thanks for the review comments Simon. > > On 12/19/09 2:10 AM, "Simon Horman" <horms@verge.net.au> wrote: > > > On Fri, Dec 18, 2009 at 06:10:02PM -0800, Scott Feldman wrote: > >> + /* Only rx-usecs and tx-usecs can be set */ > >> + if (ecmd->rx_max_coalesced_frames || ecmd->rx_coalesce_usecs_irq || > >> + ecmd->rx_max_coalesced_frames_irq || > >> + ecmd->tx_max_coalesced_frames || ecmd->tx_coalesce_usecs_irq || > >> + ecmd->tx_max_coalesced_frames_irq || > >> + ecmd->stats_block_coalesce_usecs || > >> + ecmd->use_adaptive_rx_coalesce || ecmd->use_adaptive_tx_coalesce || > >> + ecmd->pkt_rate_low || > >> + ecmd->rx_coalesce_usecs_low || ecmd->rx_max_coalesced_frames_low || > >> + ecmd->tx_coalesce_usecs_low || ecmd->tx_max_coalesced_frames_low || > >> + ecmd->pkt_rate_high || > >> + ecmd->rx_coalesce_usecs_high || > >> + ecmd->rx_max_coalesced_frames_high || > >> + ecmd->tx_coalesce_usecs_high || > >> + ecmd->tx_max_coalesced_frames_high || > >> + ecmd->rate_sample_interval) > >> + return -EINVAL; > > > > This seems rather verbose. Does it really matter if there is junk in other > > ecmd fields? They seem to be otherwise ignored. Removing the check above > > would seem to be consistent with other enic_set_*() functions. > > Ya, we can do that. > > >> if (mtu && mtu != enic->port_mtu) { > >> + enic->port_mtu = mtu; > >> if (mtu < enic->netdev->mtu) > >> printk(KERN_WARNING PFX > >> "%s: interface MTU (%d) set higher " > >> "than switch port MTU (%d)\n", > >> enic->netdev->name, enic->netdev->mtu, mtu); > >> - enic->port_mtu = mtu; > >> } > >> } > > > > This hunk seems unrelated to the rest of the patch. > > Am I missing something? > > Oops, that change snuck in there. That line got moved due to some backward > compat changes, which have been stripped away, so it looks like that line is > moving for no reason. It's a benign change so let's make the change to be > consistent with our internal code base. Sure, it doesn't seem to be doing any harm. > >> + enic->tx_coalesce_usecs = enic->config.intr_timer_usec; > >> + enic->rx_coalesce_usecs = enic->tx_coalesce_usecs; > >> + > > > > It looks like there is an space after = > > Got it. > > -scott > > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h index b09b091..68d7a66 100644 --- a/drivers/net/enic/enic.h +++ b/drivers/net/enic/enic.h @@ -93,6 +93,8 @@ struct enic { unsigned int mc_count; int csum_rx_enabled; u32 port_mtu; + u32 rx_coalesce_usecs; + u32 tx_coalesce_usecs; /* work queue cache line section */ ____cacheline_aligned struct vnic_wq wq[ENIC_WQ_MAX]; diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c index 2708ecf..664d132 100644 --- a/drivers/net/enic/enic_main.c +++ b/drivers/net/enic/enic_main.c @@ -262,7 +262,81 @@ static void enic_set_msglevel(struct net_device *netdev, u32 value) enic->msg_enable = value; } -static const struct ethtool_ops enic_ethtool_ops = { +static int enic_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ecmd) +{ + struct enic *enic = netdev_priv(netdev); + + ecmd->tx_coalesce_usecs = enic->tx_coalesce_usecs; + ecmd->rx_coalesce_usecs = enic->rx_coalesce_usecs; + + return 0; +} + +static int enic_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ecmd) +{ + struct enic *enic = netdev_priv(netdev); + u32 tx_coalesce_usecs; + u32 rx_coalesce_usecs; + + /* Only rx-usecs and tx-usecs can be set */ + if (ecmd->rx_max_coalesced_frames || ecmd->rx_coalesce_usecs_irq || + ecmd->rx_max_coalesced_frames_irq || + ecmd->tx_max_coalesced_frames || ecmd->tx_coalesce_usecs_irq || + ecmd->tx_max_coalesced_frames_irq || + ecmd->stats_block_coalesce_usecs || + ecmd->use_adaptive_rx_coalesce || ecmd->use_adaptive_tx_coalesce || + ecmd->pkt_rate_low || + ecmd->rx_coalesce_usecs_low || ecmd->rx_max_coalesced_frames_low || + ecmd->tx_coalesce_usecs_low || ecmd->tx_max_coalesced_frames_low || + ecmd->pkt_rate_high || + ecmd->rx_coalesce_usecs_high || + ecmd->rx_max_coalesced_frames_high || + ecmd->tx_coalesce_usecs_high || + ecmd->tx_max_coalesced_frames_high || + ecmd->rate_sample_interval) + return -EINVAL; + + tx_coalesce_usecs = min_t(u32, + INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX), + ecmd->tx_coalesce_usecs); + rx_coalesce_usecs = min_t(u32, + INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX), + ecmd->rx_coalesce_usecs); + + switch (vnic_dev_get_intr_mode(enic->vdev)) { + case VNIC_DEV_INTR_MODE_INTX: + if (tx_coalesce_usecs != rx_coalesce_usecs) + return -EINVAL; + + vnic_intr_coalescing_timer_set(&enic->intr[ENIC_INTX_WQ_RQ], + INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs)); + break; + case VNIC_DEV_INTR_MODE_MSI: + if (tx_coalesce_usecs != rx_coalesce_usecs) + return -EINVAL; + + vnic_intr_coalescing_timer_set(&enic->intr[0], + INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs)); + break; + case VNIC_DEV_INTR_MODE_MSIX: + vnic_intr_coalescing_timer_set(&enic->intr[ENIC_MSIX_WQ], + INTR_COALESCE_USEC_TO_HW(tx_coalesce_usecs)); + vnic_intr_coalescing_timer_set(&enic->intr[ENIC_MSIX_RQ], + INTR_COALESCE_USEC_TO_HW(rx_coalesce_usecs)); + break; + default: + break; + } + + enic->tx_coalesce_usecs = tx_coalesce_usecs; + enic->rx_coalesce_usecs = rx_coalesce_usecs; + + return 0; +} + +static struct ethtool_ops enic_ethtool_ops = { .get_settings = enic_get_settings, .get_drvinfo = enic_get_drvinfo, .get_msglevel = enic_get_msglevel, @@ -279,6 +353,8 @@ static const struct ethtool_ops enic_ethtool_ops = { .set_sg = ethtool_op_set_sg, .get_tso = ethtool_op_get_tso, .set_tso = enic_set_tso, + .get_coalesce = enic_get_coalesce, + .set_coalesce = enic_set_coalesce, .get_flags = ethtool_op_get_flags, .set_flags = ethtool_op_set_flags, }; @@ -364,12 +440,12 @@ static void enic_mtu_check(struct enic *enic) u32 mtu = vnic_dev_mtu(enic->vdev); if (mtu && mtu != enic->port_mtu) { + enic->port_mtu = mtu; if (mtu < enic->netdev->mtu) printk(KERN_WARNING PFX "%s: interface MTU (%d) set higher " "than switch port MTU (%d)\n", enic->netdev->name, enic->netdev->mtu, mtu); - enic->port_mtu = mtu; } } @@ -1972,6 +2048,9 @@ static int __devinit enic_probe(struct pci_dev *pdev, goto err_out_dev_deinit; } + enic->tx_coalesce_usecs = enic->config.intr_timer_usec; + enic->rx_coalesce_usecs = enic->tx_coalesce_usecs; + netdev->netdev_ops = &enic_netdev_ops; netdev->watchdog_timeo = 2 * HZ; netdev->ethtool_ops = &enic_ethtool_ops; diff --git a/drivers/net/enic/enic_res.c b/drivers/net/enic/enic_res.c index a605da1..02839bf 100644 --- a/drivers/net/enic/enic_res.c +++ b/drivers/net/enic/enic_res.c @@ -66,9 +66,9 @@ int enic_get_vnic_config(struct enic *enic) GET_CONFIG(wq_desc_count); GET_CONFIG(rq_desc_count); GET_CONFIG(mtu); - GET_CONFIG(intr_timer); GET_CONFIG(intr_timer_type); GET_CONFIG(intr_mode); + GET_CONFIG(intr_timer_usec); c->wq_desc_count = min_t(u32, ENIC_MAX_WQ_DESCS, @@ -88,15 +88,17 @@ int enic_get_vnic_config(struct enic *enic) max_t(u16, ENIC_MIN_MTU, c->mtu)); - c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer); + c->intr_timer_usec = min_t(u32, + INTR_COALESCE_HW_TO_USEC(VNIC_INTR_TIMER_MAX), + c->intr_timer_usec); printk(KERN_INFO PFX "vNIC MAC addr %pM wq/rq %d/%d\n", enic->mac_addr, c->wq_desc_count, c->rq_desc_count); printk(KERN_INFO PFX "vNIC mtu %d csum tx/rx %d/%d tso/lro %d/%d " - "intr timer %d\n", + "intr timer %d usec\n", c->mtu, ENIC_SETTING(enic, TXCSUM), ENIC_SETTING(enic, RXCSUM), ENIC_SETTING(enic, TSO), - ENIC_SETTING(enic, LRO), c->intr_timer); + ENIC_SETTING(enic, LRO), c->intr_timer_usec); return 0; } @@ -303,7 +305,7 @@ void enic_init_vnic_resources(struct enic *enic) for (i = 0; i < enic->intr_count; i++) { vnic_intr_init(&enic->intr[i], - enic->config.intr_timer, + INTR_COALESCE_USEC_TO_HW(enic->config.intr_timer_usec), enic->config.intr_timer_type, mask_on_assertion); } diff --git a/drivers/net/enic/vnic_enet.h b/drivers/net/enic/vnic_enet.h index 6332ac9..8eeb675 100644 --- a/drivers/net/enic/vnic_enet.h +++ b/drivers/net/enic/vnic_enet.h @@ -20,6 +20,10 @@ #ifndef _VNIC_ENIC_H_ #define _VNIC_ENIC_H_ +/* Hardware intr coalesce timer is in units of 1.5us */ +#define INTR_COALESCE_USEC_TO_HW(usec) ((usec) * 2/3) +#define INTR_COALESCE_HW_TO_USEC(usec) ((usec) * 3/2) + /* Device-specific region: enet configuration */ struct vnic_enet_config { u32 flags; @@ -30,6 +34,7 @@ struct vnic_enet_config { u8 intr_timer_type; u8 intr_mode; char devname[16]; + u32 intr_timer_usec; }; #define VENETF_TSO 0x1 /* TSO enabled */ diff --git a/drivers/net/enic/vnic_intr.c b/drivers/net/enic/vnic_intr.c index 1f8786d..3934309 100644 --- a/drivers/net/enic/vnic_intr.c +++ b/drivers/net/enic/vnic_intr.c @@ -50,12 +50,18 @@ int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, unsigned int coalescing_type, unsigned int mask_on_assertion) { - iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer); + vnic_intr_coalescing_timer_set(intr, coalescing_timer); iowrite32(coalescing_type, &intr->ctrl->coalescing_type); iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion); iowrite32(0, &intr->ctrl->int_credits); } +void vnic_intr_coalescing_timer_set(struct vnic_intr *intr, + unsigned int coalescing_timer) +{ + iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer); +} + void vnic_intr_clean(struct vnic_intr *intr) { iowrite32(0, &intr->ctrl->int_credits); diff --git a/drivers/net/enic/vnic_intr.h b/drivers/net/enic/vnic_intr.h index 9a53604..0c1e094 100644 --- a/drivers/net/enic/vnic_intr.h +++ b/drivers/net/enic/vnic_intr.h @@ -101,6 +101,8 @@ int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, unsigned int index); void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, unsigned int coalescing_type, unsigned int mask_on_assertion); +void vnic_intr_coalescing_timer_set(struct vnic_intr *intr, + unsigned int coalescing_timer); void vnic_intr_clean(struct vnic_intr *intr); #endif /* _VNIC_INTR_H_ */