diff mbox

[net-next-2.6,04/13] igb: do not overwrite EEPROM LED settings

Message ID 20090724040816.30709.39700.stgit@localhost.localdomain
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Kirsher, Jeffrey T July 24, 2009, 4:08 a.m. UTC 
From: Alexander Duyck <alexander.h.duyck@intel.com>

The igb driver was overwritting the LED settings that were configured via
EEPROM.  This is not correct behavior as the LED settings are meant to be
configured by EEPROM and not changed.  This change removes the code that
was setting the LED behavior on the interface.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

 drivers/net/igb/e1000_82575.c |    7 +------
 1 files changed, 1 insertions(+), 6 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index f946bed..606c25c 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -1000,7 +1000,7 @@  static s32 igb_init_hw_82575(struct e1000_hw *hw)
  **/
 static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
 {
-	u32 ctrl, led_ctrl;
+	u32 ctrl;
 	s32  ret_val;
 	bool link;
 
@@ -1015,11 +1015,6 @@  static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
 		break;
 	case e1000_phy_igp_3:
 		ret_val = igb_copper_link_setup_igp(hw);
-		/* Setup activity LED */
-		led_ctrl = rd32(E1000_LEDCTL);
-		led_ctrl &= IGP_ACTIVITY_LED_MASK;
-		led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
-		wr32(E1000_LEDCTL, led_ctrl);
 		break;
 	default:
 		ret_val = -E1000_ERR_PHY;