@@ -111,6 +111,8 @@ following attributes:
name: Name assigned by driver to this key (interface or driver name).
type: Driver type string ("wlan", "bluetooth", etc).
+ persistent: Whether the soft blocked state is initialised from
+ non-volatile storage at startup.
state: Current state of the transmitter
0: RFKILL_STATE_SOFT_BLOCKED
transmitter is turned off by software
@@ -940,7 +940,7 @@ M: me@bobcopeland.com
L: linux-wireless@vger.kernel.org
L: ath5k-devel@lists.ath5k.org
S: Maintained
-F: drivers/net/wireless/ath5k/
+F: drivers/net/wireless/ath/ath5k/
ATHEROS ATH9K WIRELESS DRIVER
P: Luis R. Rodriguez
@@ -956,7 +956,7 @@ M: senthilkumar@atheros.com
L: linux-wireless@vger.kernel.org
L: ath9k-devel@lists.ath9k.org
S: Supported
-F: drivers/net/wireless/ath9k/
+F: drivers/net/wireless/ath/ath9k/
ATHEROS AR9170 WIRELESS DRIVER
P: Christian Lamparter
@@ -964,7 +964,7 @@ M: chunkeey@web.de
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ar9170
S: Maintained
-F: drivers/net/wireless/ar9170/
+F: drivers/net/wireless/ath/ar9170/
ATI_REMOTE2 DRIVER
P: Ville Syrjala
@@ -538,6 +538,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
sc->iobase = mem; /* So we can unmap it on detach */
sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
sc->opmode = NL80211_IFTYPE_STATION;
+ sc->bintval = 1000;
mutex_init(&sc->lock);
spin_lock_init(&sc->rxbuflock);
spin_lock_init(&sc->txbuflock);
@@ -686,6 +687,13 @@ ath5k_pci_resume(struct pci_dev *pdev)
if (err)
return err;
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_write_config_byte(pdev, 0x41, 0);
+
err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
if (err) {
ATH5K_ERR(sc, "request_irq failed\n");
@@ -2748,9 +2756,6 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
goto end;
}
- /* Set to a reasonable value. Note that this will
- * be set to mac80211's value at ath5k_config(). */
- sc->bintval = 1000;
ath5k_hw_set_lladdr(sc->ah, conf->mac_addr);
ret = 0;
@@ -1196,8 +1196,8 @@ void ath_radio_disable(struct ath_softc *sc)
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, 1);
- ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
ath9k_ps_restore(sc);
+ ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
}
/*******************/
@@ -87,6 +87,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
struct ath_softc *sc;
struct ieee80211_hw *hw;
u8 csz;
+ u32 val;
int ret = 0;
struct ath_hw *ah;
@@ -133,6 +134,14 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_set_master(pdev);
+ /*
+ * Disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state.
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
+
ret = pci_request_region(pdev, 0, "ath9k");
if (ret) {
dev_err(&pdev->dev, "PCI memory region reserve error\n");
@@ -239,12 +248,21 @@ static int ath_pci_resume(struct pci_dev *pdev)
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ u32 val;
int err;
err = pci_enable_device(pdev);
if (err)
return err;
pci_restore_state(pdev);
+ /*
+ * Suspend/Resume resets the PCI configuration space, so we have to
+ * re-disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state
+ */
+ pci_read_config_dword(pdev, 0x40, &val);
+ if ((val & 0x0000ff00) != 0)
+ pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
/* Enable LED */
ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
@@ -539,11 +539,14 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
if (ath_beacon_dtim_pending_cab(skb)) {
/*
* Remain awake waiting for buffered broadcast/multicast
- * frames.
+ * frames. If the last broadcast/multicast frame is not
+ * received properly, the next beacon frame will work as
+ * a backup trigger for returning into NETWORK SLEEP state,
+ * so we are waiting for it as well.
*/
DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
"buffered broadcast/multicast frame(s)\n");
- sc->sc_flags |= SC_OP_WAIT_FOR_CAB;
+ sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
return;
}
@@ -288,6 +288,7 @@ struct iwm_priv {
u8 *eeprom;
struct timer_list watchdog;
struct work_struct reset_worker;
+ struct mutex mutex;
struct rfkill *rfkill;
char private[0] __attribute__((__aligned__(NETDEV_ALIGN)));
@@ -315,8 +316,11 @@ extern const struct iw_handler_def iwm_iw_handler_def;
void *iwm_if_alloc(int sizeof_bus, struct device *dev,
struct iwm_if_ops *if_ops);
void iwm_if_free(struct iwm_priv *iwm);
+int iwm_if_add(struct iwm_priv *iwm);
+void iwm_if_remove(struct iwm_priv *iwm);
int iwm_mode_to_nl80211_iftype(int mode);
int iwm_priv_init(struct iwm_priv *iwm);
+void iwm_priv_deinit(struct iwm_priv *iwm);
void iwm_reset(struct iwm_priv *iwm);
void iwm_tx_credit_init_pools(struct iwm_priv *iwm,
struct iwm_umac_notif_alive *alive);
@@ -112,6 +112,9 @@ static void iwm_statistics_request(struct work_struct *work)
iwm_send_umac_stats_req(iwm, 0);
}
+int __iwm_up(struct iwm_priv *iwm);
+int __iwm_down(struct iwm_priv *iwm);
+
static void iwm_reset_worker(struct work_struct *work)
{
struct iwm_priv *iwm;
@@ -120,6 +123,19 @@ static void iwm_reset_worker(struct work_struct *work)
iwm = container_of(work, struct iwm_priv, reset_worker);
+ /*
+ * XXX: The iwm->mutex is introduced purely for this reset work,
+ * because the other users for iwm_up and iwm_down are only netdev
+ * ndo_open and ndo_stop which are already protected by rtnl.
+ * Please remove iwm->mutex together if iwm_reset_worker() is not
+ * required in the future.
+ */
+ if (!mutex_trylock(&iwm->mutex)) {
+ IWM_WARN(iwm, "We are in the middle of interface bringing "
+ "UP/DOWN. Skip driver resetting.\n");
+ return;
+ }
+
if (iwm->umac_profile_active) {
profile = kmalloc(sizeof(struct iwm_umac_profile), GFP_KERNEL);
if (profile)
@@ -128,10 +144,10 @@ static void iwm_reset_worker(struct work_struct *work)
IWM_ERR(iwm, "Couldn't alloc memory for profile\n");
}
- iwm_down(iwm);
+ __iwm_down(iwm);
while (retry++ < 3) {
- ret = iwm_up(iwm);
+ ret = __iwm_up(iwm);
if (!ret)
break;
@@ -142,7 +158,7 @@ static void iwm_reset_worker(struct work_struct *work)
IWM_WARN(iwm, "iwm_up() failed: %d\n", ret);
kfree(profile);
- return;
+ goto out;
}
if (profile) {
@@ -151,6 +167,9 @@ static void iwm_reset_worker(struct work_struct *work)
iwm_send_mlme_profile(iwm);
kfree(profile);
}
+
+ out:
+ mutex_unlock(&iwm->mutex);
}
static void iwm_watchdog(unsigned long data)
@@ -215,10 +234,21 @@ int iwm_priv_init(struct iwm_priv *iwm)
init_timer(&iwm->watchdog);
iwm->watchdog.function = iwm_watchdog;
iwm->watchdog.data = (unsigned long)iwm;
+ mutex_init(&iwm->mutex);
return 0;
}
+void iwm_priv_deinit(struct iwm_priv *iwm)
+{
+ int i;
+
+ for (i = 0; i < IWM_TX_QUEUES; i++)
+ destroy_workqueue(iwm->txq[i].wq);
+
+ destroy_workqueue(iwm->rx_wq);
+}
+
/*
* We reset all the structures, and we reset the UMAC.
* After calling this routine, you're expected to reload
@@ -466,7 +496,7 @@ void iwm_link_off(struct iwm_priv *iwm)
iwm_rx_free(iwm);
- cancel_delayed_work(&iwm->stats_request);
+ cancel_delayed_work_sync(&iwm->stats_request);
memset(wstats, 0, sizeof(struct iw_statistics));
wstats->qual.updated = IW_QUAL_ALL_INVALID;
@@ -511,7 +541,7 @@ static int iwm_channels_init(struct iwm_priv *iwm)
return 0;
}
-int iwm_up(struct iwm_priv *iwm)
+int __iwm_up(struct iwm_priv *iwm)
{
int ret;
struct iwm_notif *notif_reboot, *notif_ack = NULL;
@@ -647,7 +677,18 @@ int iwm_up(struct iwm_priv *iwm)
return -EIO;
}
-int iwm_down(struct iwm_priv *iwm)
+int iwm_up(struct iwm_priv *iwm)
+{
+ int ret;
+
+ mutex_lock(&iwm->mutex);
+ ret = __iwm_up(iwm);
+ mutex_unlock(&iwm->mutex);
+
+ return ret;
+}
+
+int __iwm_down(struct iwm_priv *iwm)
{
int ret;
@@ -678,3 +719,14 @@ int iwm_down(struct iwm_priv *iwm)
return 0;
}
+
+int iwm_down(struct iwm_priv *iwm)
+{
+ int ret;
+
+ mutex_lock(&iwm->mutex);
+ ret = __iwm_down(iwm);
+ mutex_unlock(&iwm->mutex);
+
+ return ret;
+}
@@ -114,32 +114,31 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev,
iwm = wdev_to_iwm(wdev);
iwm->bus_ops = if_ops;
iwm->wdev = wdev;
- iwm_priv_init(iwm);
+
+ ret = iwm_priv_init(iwm);
+ if (ret) {
+ dev_err(dev, "failed to init iwm_priv\n");
+ goto out_wdev;
+ }
+
wdev->iftype = iwm_mode_to_nl80211_iftype(iwm->conf.mode);
- ndev = alloc_netdev_mq(0, "wlan%d", ether_setup,
- IWM_TX_QUEUES);
+ ndev = alloc_netdev_mq(0, "wlan%d", ether_setup, IWM_TX_QUEUES);
if (!ndev) {
dev_err(dev, "no memory for network device instance\n");
- goto out_wdev;
+ goto out_priv;
}
ndev->netdev_ops = &iwm_netdev_ops;
ndev->wireless_handlers = &iwm_iw_handler_def;
ndev->ieee80211_ptr = wdev;
SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
- ret = register_netdev(ndev);
- if (ret < 0) {
- dev_err(dev, "Failed to register netdev: %d\n", ret);
- goto out_ndev;
- }
-
wdev->netdev = ndev;
return iwm;
- out_ndev:
- free_netdev(ndev);
+ out_priv:
+ iwm_priv_deinit(iwm);
out_wdev:
iwm_wdev_free(iwm);
@@ -148,15 +147,29 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev,
void iwm_if_free(struct iwm_priv *iwm)
{
- int i;
-
if (!iwm_to_ndev(iwm))
return;
- unregister_netdev(iwm_to_ndev(iwm));
free_netdev(iwm_to_ndev(iwm));
iwm_wdev_free(iwm);
- destroy_workqueue(iwm->rx_wq);
- for (i = 0; i < IWM_TX_QUEUES; i++)
- destroy_workqueue(iwm->txq[i].wq);
+ iwm_priv_deinit(iwm);
+}
+
+int iwm_if_add(struct iwm_priv *iwm)
+{
+ struct net_device *ndev = iwm_to_ndev(iwm);
+ int ret;
+
+ ret = register_netdev(ndev);
+ if (ret < 0) {
+ dev_err(&ndev->dev, "Failed to register netdev: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+void iwm_if_remove(struct iwm_priv *iwm)
+{
+ unregister_netdev(iwm_to_ndev(iwm));
}
@@ -454,10 +454,18 @@ static int iwm_sdio_probe(struct sdio_func *func,
INIT_WORK(&hw->isr_worker, iwm_sdio_isr_worker);
+ ret = iwm_if_add(iwm);
+ if (ret) {
+ dev_err(dev, "add SDIO interface failed\n");
+ goto destroy_wq;
+ }
+
dev_info(dev, "IWM SDIO probe\n");
return 0;
+ destroy_wq:
+ destroy_workqueue(hw->isr_wq);
debugfs_exit:
iwm_debugfs_exit(iwm);
if_free:
@@ -471,9 +479,10 @@ static void iwm_sdio_remove(struct sdio_func *func)
struct iwm_priv *iwm = hw_to_iwm(hw);
struct device *dev = &func->dev;
+ iwm_if_remove(iwm);
+ destroy_workqueue(hw->isr_wq);
iwm_debugfs_exit(iwm);
iwm_if_free(iwm);
- destroy_workqueue(hw->isr_wq);
sdio_set_drvdata(func, NULL);
@@ -67,6 +67,7 @@ static struct usb_device_id usb_ids[] = {
{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0xe503), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x083a, 0xe506), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
@@ -958,12 +958,12 @@ static void acer_rfkill_update(struct work_struct *ignored)
status = get_u32(&state, ACER_CAP_WIRELESS);
if (ACPI_SUCCESS(status))
- rfkill_set_sw_state(wireless_rfkill, !!state);
+ rfkill_set_sw_state(wireless_rfkill, !state);
if (has_cap(ACER_CAP_BLUETOOTH)) {
status = get_u32(&state, ACER_CAP_BLUETOOTH);
if (ACPI_SUCCESS(status))
- rfkill_set_sw_state(bluetooth_rfkill, !!state);
+ rfkill_set_sw_state(bluetooth_rfkill, !state);
}
schedule_delayed_work(&acer_rfkill_work, round_jiffies_relative(HZ));
@@ -180,6 +180,7 @@ static struct key_entry eeepc_keymap[] = {
*/
static int eeepc_hotk_add(struct acpi_device *device);
static int eeepc_hotk_remove(struct acpi_device *device, int type);
+static int eeepc_hotk_resume(struct acpi_device *device);
static const struct acpi_device_id eeepc_device_ids[] = {
{EEEPC_HOTK_HID, 0},
@@ -194,6 +195,7 @@ static struct acpi_driver eeepc_hotk_driver = {
.ops = {
.add = eeepc_hotk_add,
.remove = eeepc_hotk_remove,
+ .resume = eeepc_hotk_resume,
},
};
@@ -512,15 +514,12 @@ static int notify_brn(void)
return -1;
}
-static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
+static void eeepc_rfkill_hotplug(void)
{
struct pci_dev *dev;
struct pci_bus *bus = pci_find_bus(0, 1);
bool blocked;
- if (event != ACPI_NOTIFY_BUS_CHECK)
- return;
-
if (!bus) {
printk(EEEPC_WARNING "Unable to find PCI bus 1?\n");
return;
@@ -551,6 +550,14 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill, blocked);
}
+static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
+{
+ if (event != ACPI_NOTIFY_BUS_CHECK)
+ return;
+
+ eeepc_rfkill_hotplug();
+}
+
static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
{
static struct key_entry *key;
@@ -675,8 +682,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
if (!ehotk->eeepc_wlan_rfkill)
goto wlan_fail;
- rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
- get_acpi(CM_ASL_WLAN) != 1);
+ rfkill_init_sw_state(ehotk->eeepc_wlan_rfkill,
+ get_acpi(CM_ASL_WLAN) != 1);
result = rfkill_register(ehotk->eeepc_wlan_rfkill);
if (result)
goto wlan_fail;
@@ -693,8 +700,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
if (!ehotk->eeepc_bluetooth_rfkill)
goto bluetooth_fail;
- rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
- get_acpi(CM_ASL_BLUETOOTH) != 1);
+ rfkill_init_sw_state(ehotk->eeepc_bluetooth_rfkill,
+ get_acpi(CM_ASL_BLUETOOTH) != 1);
result = rfkill_register(ehotk->eeepc_bluetooth_rfkill);
if (result)
goto bluetooth_fail;
@@ -734,6 +741,33 @@ static int eeepc_hotk_remove(struct acpi_device *device, int type)
return 0;
}
+static int eeepc_hotk_resume(struct acpi_device *device)
+{
+ if (ehotk->eeepc_wlan_rfkill) {
+ bool wlan;
+
+ /* Workaround - it seems that _PTS disables the wireless
+ without notification or changing the value read by WLAN.
+ Normally this is fine because the correct value is restored
+ from the non-volatile storage on resume, but we need to do
+ it ourself if case suspend is aborted, or we lose wireless.
+ */
+ wlan = get_acpi(CM_ASL_WLAN);
+ set_acpi(CM_ASL_WLAN, wlan);
+
+ rfkill_set_sw_state(ehotk->eeepc_wlan_rfkill,
+ wlan != 1);
+
+ eeepc_rfkill_hotplug();
+ }
+
+ if (ehotk->eeepc_bluetooth_rfkill)
+ rfkill_set_sw_state(ehotk->eeepc_bluetooth_rfkill,
+ get_acpi(CM_ASL_BLUETOOTH) != 1);
+
+ return 0;
+}
+
/*
* Hwmon
*/
@@ -1163,8 +1163,8 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
{
struct tpacpi_rfk *atp_rfk;
int res;
- bool initial_sw_state = false;
- int initial_sw_status;
+ bool sw_state = false;
+ int sw_status;
BUG_ON(id >= TPACPI_RFK_SW_MAX || tpacpi_rfkill_switches[id]);
@@ -1185,17 +1185,17 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id,
atp_rfk->id = id;
atp_rfk->ops = tp_rfkops;
- initial_sw_status = (tp_rfkops->get_status)();
- if (initial_sw_status < 0) {
+ sw_status = (tp_rfkops->get_status)();
+ if (sw_status < 0) {
printk(TPACPI_ERR
"failed to read initial state for %s, error %d\n",
- name, initial_sw_status);
+ name, sw_status);
} else {
- initial_sw_state = (initial_sw_status == TPACPI_RFK_RADIO_OFF);
+ sw_state = (sw_status == TPACPI_RFK_RADIO_OFF);
if (set_default) {
/* try to keep the initial state, since we ask the
* firmware to preserve it across S5 in NVRAM */
- rfkill_set_sw_state(atp_rfk->rfkill, initial_sw_state);
+ rfkill_init_sw_state(atp_rfk->rfkill, sw_state);
}
}
rfkill_set_hw_state(atp_rfk->rfkill, tpacpi_rfk_check_hwblock_state());
@@ -160,8 +160,9 @@ struct rfkill * __must_check rfkill_alloc(const char *name,
* the rfkill structure. Before calling this function the driver needs
* to be ready to service method calls from rfkill.
*
- * If the software blocked state is not set before registration,
- * set_block will be called to initialize it to a default value.
+ * If rfkill_init_sw_state() is not called before registration,
+ * set_block() will be called to initialize the software blocked state
+ * to a default value.
*
* If the hardware blocked state is not set before registration,
* it is assumed to be unblocked.
@@ -234,9 +235,11 @@ bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
* rfkill drivers that get events when the soft-blocked state changes
* (yes, some platforms directly act on input but allow changing again)
* use this function to notify the rfkill core (and through that also
- * userspace) of the current state. It is not necessary to notify on
- * resume; since hibernation can always change the soft-blocked state,
- * the rfkill core will unconditionally restore the previous state.
+ * userspace) of the current state.
+ *
+ * Drivers should also call this function after resume if the state has
+ * been changed by the user. This only makes sense for "persistent"
+ * devices (see rfkill_init_sw_state()).
*
* This function can be called in any context, even from within rfkill
* callbacks.
@@ -247,6 +250,22 @@ bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
/**
+ * rfkill_init_sw_state - Initialize persistent software block state
+ * @rfkill: pointer to the rfkill class to modify.
+ * @state: the current software block state to set
+ *
+ * rfkill drivers that preserve their software block state over power off
+ * use this function to notify the rfkill core (and through that also
+ * userspace) of their initial state. It should only be used before
+ * registration.
+ *
+ * In addition, it marks the device as "persistent", an attribute which
+ * can be read by userspace. Persistent devices are expected to preserve
+ * their own state when suspended.
+ */
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked);
+
+/**
* rfkill_set_states - Set the internal rfkill block states
* @rfkill: pointer to the rfkill class to modify.
* @sw: the current software block state to set
@@ -307,6 +326,10 @@ static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
return blocked;
}
+static inline void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+}
+
static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
{
}
@@ -56,7 +56,6 @@ struct rfkill {
u32 idx;
bool registered;
- bool suspended;
bool persistent;
const struct rfkill_ops *ops;
@@ -224,7 +223,7 @@ static void rfkill_send_events(struct rfkill *rfkill, enum rfkill_operation op)
static void rfkill_event(struct rfkill *rfkill)
{
- if (!rfkill->registered || rfkill->suspended)
+ if (!rfkill->registered)
return;
kobject_uevent(&rfkill->dev.kobj, KOBJ_CHANGE);
@@ -270,6 +269,9 @@ static void rfkill_set_block(struct rfkill *rfkill, bool blocked)
unsigned long flags;
int err;
+ if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+ return;
+
/*
* Some platforms (...!) generate input events which affect the
* _hard_ kill state -- whenever something tries to change the
@@ -292,9 +294,6 @@ static void rfkill_set_block(struct rfkill *rfkill, bool blocked)
rfkill->state |= RFKILL_BLOCK_SW_SETCALL;
spin_unlock_irqrestore(&rfkill->lock, flags);
- if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
- return;
-
err = rfkill->ops->set_block(rfkill->data, blocked);
spin_lock_irqsave(&rfkill->lock, flags);
@@ -508,19 +507,32 @@ bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked)
blocked = blocked || hwblock;
spin_unlock_irqrestore(&rfkill->lock, flags);
- if (!rfkill->registered) {
- rfkill->persistent = true;
- } else {
- if (prev != blocked && !hwblock)
- schedule_work(&rfkill->uevent_work);
+ if (!rfkill->registered)
+ return blocked;
- rfkill_led_trigger_event(rfkill);
- }
+ if (prev != blocked && !hwblock)
+ schedule_work(&rfkill->uevent_work);
+
+ rfkill_led_trigger_event(rfkill);
return blocked;
}
EXPORT_SYMBOL(rfkill_set_sw_state);
+void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked)
+{
+ unsigned long flags;
+
+ BUG_ON(!rfkill);
+ BUG_ON(rfkill->registered);
+
+ spin_lock_irqsave(&rfkill->lock, flags);
+ __rfkill_set_sw_state(rfkill, blocked);
+ rfkill->persistent = true;
+ spin_unlock_irqrestore(&rfkill->lock, flags);
+}
+EXPORT_SYMBOL(rfkill_init_sw_state);
+
void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
{
unsigned long flags;
@@ -598,6 +610,15 @@ static ssize_t rfkill_idx_show(struct device *dev,
return sprintf(buf, "%d\n", rfkill->idx);
}
+static ssize_t rfkill_persistent_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rfkill *rfkill = to_rfkill(dev);
+
+ return sprintf(buf, "%d\n", rfkill->persistent);
+}
+
static u8 user_state_from_blocked(unsigned long state)
{
if (state & RFKILL_BLOCK_HW)
@@ -656,6 +677,7 @@ static struct device_attribute rfkill_dev_attrs[] = {
__ATTR(name, S_IRUGO, rfkill_name_show, NULL),
__ATTR(type, S_IRUGO, rfkill_type_show, NULL),
__ATTR(index, S_IRUGO, rfkill_idx_show, NULL),
+ __ATTR(persistent, S_IRUGO, rfkill_persistent_show, NULL),
__ATTR(state, S_IRUGO|S_IWUSR, rfkill_state_show, rfkill_state_store),
__ATTR(claim, S_IRUGO|S_IWUSR, rfkill_claim_show, rfkill_claim_store),
__ATTR_NULL
@@ -718,8 +740,6 @@ static int rfkill_suspend(struct device *dev, pm_message_t state)
rfkill_pause_polling(rfkill);
- rfkill->suspended = true;
-
return 0;
}
@@ -728,10 +748,10 @@ static int rfkill_resume(struct device *dev)
struct rfkill *rfkill = to_rfkill(dev);
bool cur;
- cur = !!(rfkill->state & RFKILL_BLOCK_SW);
- rfkill_set_block(rfkill, cur);
-
- rfkill->suspended = false;
+ if (!rfkill->persistent) {
+ cur = !!(rfkill->state & RFKILL_BLOCK_SW);
+ rfkill_set_block(rfkill, cur);
+ }
rfkill_resume_polling(rfkill);
@@ -1687,13 +1687,52 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
if (err)
goto out_rtnl;
- if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
- dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
- err = -EINVAL;
+ err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
+ if (err)
goto out;
+
+ /* validate settings */
+ err = 0;
+
+ switch (dev->ieee80211_ptr->iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ /* disallow mesh-specific things */
+ if (params.plink_action)
+ err = -EINVAL;
+ break;
+ case NL80211_IFTYPE_STATION:
+ /* disallow everything but AUTHORIZED flag */
+ if (params.plink_action)
+ err = -EINVAL;
+ if (params.vlan)
+ err = -EINVAL;
+ if (params.supported_rates)
+ err = -EINVAL;
+ if (params.ht_capa)
+ err = -EINVAL;
+ if (params.listen_interval >= 0)
+ err = -EINVAL;
+ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
+ err = -EINVAL;
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ /* disallow things mesh doesn't support */
+ if (params.vlan)
+ err = -EINVAL;
+ if (params.ht_capa)
+ err = -EINVAL;
+ if (params.listen_interval >= 0)
+ err = -EINVAL;
+ if (params.supported_rates)
+ err = -EINVAL;
+ if (params.sta_flags_mask)
+ err = -EINVAL;
+ break;
+ default:
+ err = -EINVAL;
}
- err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
if (err)
goto out;
@@ -1728,9 +1767,6 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
- if (!info->attrs[NL80211_ATTR_STA_AID])
- return -EINVAL;
-
if (!info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
return -EINVAL;
@@ -1745,9 +1781,11 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
- params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
- if (!params.aid || params.aid > IEEE80211_MAX_AID)
- return -EINVAL;
+ if (info->attrs[NL80211_ATTR_STA_AID]) {
+ params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
+ if (!params.aid || params.aid > IEEE80211_MAX_AID)
+ return -EINVAL;
+ }
if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
params.ht_capa =
@@ -1762,13 +1800,39 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
if (err)
goto out_rtnl;
- if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
- dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
- err = -EINVAL;
+ err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
+ if (err)
goto out;
+
+ /* validate settings */
+ err = 0;
+
+ switch (dev->ieee80211_ptr->iftype) {
+ case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_AP_VLAN:
+ /* all ok but must have AID */
+ if (!params.aid)
+ err = -EINVAL;
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ /* disallow things mesh doesn't support */
+ if (params.vlan)
+ err = -EINVAL;
+ if (params.aid)
+ err = -EINVAL;
+ if (params.ht_capa)
+ err = -EINVAL;
+ if (params.listen_interval >= 0)
+ err = -EINVAL;
+ if (params.supported_rates)
+ err = -EINVAL;
+ if (params.sta_flags_mask)
+ err = -EINVAL;
+ break;
+ default:
+ err = -EINVAL;
}
- err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, ¶ms.vlan);
if (err)
goto out;
@@ -1812,7 +1876,8 @@ static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
goto out_rtnl;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
- dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN) {
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
+ dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EINVAL;
goto out;
}
Dave, Here is another smattering of fixes intended fo 2.6.31. Most of them are minor, but worthwhile. Also included is a USB ID for zd1211rw and several patches from Alan Jenkins that are continuing fall-out from the rfkill rewrite. Please let me know if there are problems! Thanks, John --- Individual patches are available here: http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6/ --- The following changes since commit cb2107be43d2fc5eadec58b92b54bf32c00bfff3: Dhananjay Phadke (1): netxen: fix tx ring accounting are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git master Alan Jenkins (4): rfkill: rfkill_set_block() when suspended nitpick rfkill: don't restore software blocked state on persistent devices eeepc-laptop: read rfkill soft-blocked state on resume rfkill: export persistent attribute in sysfs Andrey Yurovsky (2): cfg80211: allow adding/deleting stations on mesh cfg80211: allow setting station parameters in mesh Gabor Juhos (2): ath9k: wait for beacon frame along with CAB ath9k: restore PS mode, before we put the chip into FULL SLEEP state. Hin-Tak Leung (1): zd1211rw: adding 083a:e503 as a ZD1211B device Jiri Slaby (1): ath5k: fix beacon_int handling Joe Perches (1): MAINTAINERS: Fix Atheros pattern paths Johannes Berg (1): cfg80211: validate station settings Jouni Malinen (2): ath9k: Fix PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling ath5k: avoid PCI FATAL interrupts by restoring RETRY_TIMEOUT disabling Troy Moure (1): acer-wmi: fix rfkill conversion Zhu Yi (4): iwmc3200wifi: check for iwm_priv_init error iwmc3200wifi: add iwm_if_add and iwm_if_remove iwmc3200wifi: fix potential kernel oops on module removal iwmc3200wifi: add a mutex to protect iwm_reset_worker Documentation/rfkill.txt | 2 + MAINTAINERS | 6 +- drivers/net/wireless/ath/ath5k/base.c | 11 +++- drivers/net/wireless/ath/ath9k/main.c | 2 +- drivers/net/wireless/ath/ath9k/pci.c | 18 +++++ drivers/net/wireless/ath/ath9k/recv.c | 7 ++- drivers/net/wireless/iwmc3200wifi/iwm.h | 4 + drivers/net/wireless/iwmc3200wifi/main.c | 64 +++++++++++++++++-- drivers/net/wireless/iwmc3200wifi/netdev.c | 49 +++++++++----- drivers/net/wireless/iwmc3200wifi/sdio.c | 11 +++- drivers/net/wireless/zd1211rw/zd_usb.c | 1 + drivers/platform/x86/acer-wmi.c | 4 +- drivers/platform/x86/eeepc-laptop.c | 50 ++++++++++++--- drivers/platform/x86/thinkpad_acpi.c | 14 ++-- include/linux/rfkill.h | 33 ++++++++-- net/rfkill/core.c | 56 +++++++++++----- net/wireless/nl80211.c | 95 +++++++++++++++++++++++----- 17 files changed, 338 insertions(+), 89 deletions(-)