diff mbox

[4/5] qeth: omit upstream checksumming for HiperSockets

Message ID 20090520073928.073471000@de.ibm.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

frank.blaschka@de.ibm.com May 20, 2009, 7:38 a.m. UTC 
From: Ursula Braun <ursula.braun@de.ibm.com>

For HiperSocket devices receive-path checksumming is not required.
Thus NO_CHECKSUMMING is used as default for HiperSocket interfaces.
For layer3 devices configured with NO_CHECKSUMMING received skbs
should have set their ip_summed field to CHECKSUM_UNNECESSARY.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
---

 drivers/s390/net/qeth_core_main.c |    2 ++
 drivers/s390/net/qeth_l3_main.c   |   20 +++++++++++++-------
 2 files changed, 15 insertions(+), 7 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff -urpN linux-2.6/drivers/s390/net/qeth_core_main.c linux-2.6-patched/drivers/s390/net/qeth_core_main.c
--- linux-2.6/drivers/s390/net/qeth_core_main.c	2009-05-20 08:56:25.000000000 +0200
+++ linux-2.6-patched/drivers/s390/net/qeth_core_main.c	2009-05-20 08:56:43.000000000 +0200
@@ -1140,6 +1140,8 @@  static int qeth_setup_card(struct qeth_c
 	card->ipato.enabled = 0;
 	card->ipato.invert4 = 0;
 	card->ipato.invert6 = 0;
+	if (card->info.type == QETH_CARD_TYPE_IQD)
+		card->options.checksum_type = NO_CHECKSUMMING;
 	/* init QDIO stuff */
 	qeth_init_qdio_info(card);
 	return 0;
diff -urpN linux-2.6/drivers/s390/net/qeth_l3_main.c linux-2.6-patched/drivers/s390/net/qeth_l3_main.c
--- linux-2.6/drivers/s390/net/qeth_l3_main.c	2009-05-20 08:56:42.000000000 +0200
+++ linux-2.6-patched/drivers/s390/net/qeth_l3_main.c	2009-05-20 08:56:43.000000000 +0200
@@ -1920,16 +1920,22 @@  static inline __u16 qeth_l3_rebuild_skb(
 		 hdr->hdr.l3.vlan_id : *((u16 *)&hdr->hdr.l3.dest_addr[12]);
 	}
 
-	skb->ip_summed = card->options.checksum_type;
-	if (card->options.checksum_type == HW_CHECKSUMMING) {
+	switch (card->options.checksum_type) {
+	case SW_CHECKSUMMING:
+		skb->ip_summed = CHECKSUM_NONE;
+		break;
+	case NO_CHECKSUMMING:
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+		break;
+	case HW_CHECKSUMMING:
 		if ((hdr->hdr.l3.ext_flags &
-		      (QETH_HDR_EXT_CSUM_HDR_REQ |
-		       QETH_HDR_EXT_CSUM_TRANSP_REQ)) ==
-		     (QETH_HDR_EXT_CSUM_HDR_REQ |
-		      QETH_HDR_EXT_CSUM_TRANSP_REQ))
+		    (QETH_HDR_EXT_CSUM_HDR_REQ |
+		     QETH_HDR_EXT_CSUM_TRANSP_REQ)) ==
+		    (QETH_HDR_EXT_CSUM_HDR_REQ |
+		     QETH_HDR_EXT_CSUM_TRANSP_REQ))
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		else
-			skb->ip_summed = SW_CHECKSUMMING;
+			skb->ip_summed = CHECKSUM_NONE;
 	}
 
 	return vlan_id;