Message ID | 20090319050032.11320.37658.stgit@localhost.localdomain |
---|---|
State | RFC, archived |
Delegated to: | David Miller |
Headers | show |
RFC, please don't apply yet. On Wed, Mar 18, 2009 at 11:00 PM, Grant Likely <grant.likely@secretlab.ca> wrote: > From: Grant Likely <grant.likely@secretlab.ca> > > Add support for parsing the device tree for PHY devices on an MDIO bus > > CC: Andy Fleming <afleming@freescale.com> > CC: linuxppc-dev@ozlabs.org > CC: devtree-discuss@ozlabs.org > > Signed-off-by: Grant Likely <grant.likely@secretlab.ca> > --- > > drivers/of/Kconfig | 6 ++ > drivers/of/Makefile | 1 > drivers/of/of_mdio.c | 130 +++++++++++++++++++++++++++++++++++++++++++++++ > include/linux/of_mdio.h | 21 ++++++++ > 4 files changed, 158 insertions(+), 0 deletions(-) > create mode 100644 drivers/of/of_mdio.c > create mode 100644 include/linux/of_mdio.h > > > diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig > index f821dbc..6fe043b 100644 > --- a/drivers/of/Kconfig > +++ b/drivers/of/Kconfig > @@ -19,3 +19,9 @@ config OF_SPI > depends on OF && PPC_OF && SPI > help > OpenFirmware SPI accessors > + > +config OF_MDIO > + def_tristate PHYLIB > + depends on OF && PHYLIB > + help > + OpenFirmware MDIO bus (Ethernet PHY) accessors > diff --git a/drivers/of/Makefile b/drivers/of/Makefile > index 4c3c6f8..bdfb5f5 100644 > --- a/drivers/of/Makefile > +++ b/drivers/of/Makefile > @@ -3,3 +3,4 @@ obj-$(CONFIG_OF_DEVICE) += device.o platform.o > obj-$(CONFIG_OF_GPIO) += gpio.o > obj-$(CONFIG_OF_I2C) += of_i2c.o > obj-$(CONFIG_OF_SPI) += of_spi.o > +obj-$(CONFIG_OF_MDIO) += of_mdio.o > diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c > new file mode 100644 > index 0000000..6f3038a > --- /dev/null > +++ b/drivers/of/of_mdio.c > @@ -0,0 +1,130 @@ > +/* > + * OF helpers for the MDIO (Ethernet PHY) API > + * > + * Copyright (c) 2009 Secret Lab Technologies, Ltd. > + * > + * This file is released under the GPLv2 > + * > + * This file provides helper functions for extracting PHY device information > + * out of the OpenFirmware device tree and using it to populate an mii_bus. > + */ > + > +#include <linux/phy.h> > +#include <linux/of.h> > +#include <linux/of_mdio.h> > +#include <linux/module.h> > + > +MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); > +MODULE_LICENSE("GPL"); > + > +/** > + * of_mdiobus_register - Register mii_bus and create PHYs from the device tree > + * @mdio: pointer to mii_bus structure > + * @np: pointer to device_node of MDIO bus. > + * > + * This function registers the mii_bus structure and registers a phy_device > + * for each child node of @np. > + */ > +int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) > +{ > + struct phy_device *phy; > + struct device_node *child; > + int rc, i; > + > + /* Mask out all PHYs from auto probing. Instead the PHYs listed in > + * the device tree are populated after the bus has been registered */ > + mdio->phy_mask = ~0; > + > + /* Clear all the IRQ properties */ > + if (mdio->irq) > + for (i=0; i<PHY_MAX_ADDR; i++) > + mdio->irq[i] = PHY_POLL; > + > + /* Register the MDIO bus */ > + rc = mdiobus_register(mdio); > + if (rc) > + return rc; > + > + /* Loop over the child nodes and register a phy_device for each one */ > + for_each_child_of_node(np, child) { > + const u32 *addr; > + int len; > + > + /* A PHY must have a reg property in the range [0-31] */ > + addr = of_get_property(child, "reg", &len); > + if (!addr || len < sizeof(*addr) || *addr >= 32 || *addr < 0) { > + dev_err(&mdio->dev, "%s has invalid PHY address\n", > + child->full_name); > + continue; > + } > + > + if (mdio->irq) { > + mdio->irq[*addr] = irq_of_parse_and_map(child, 0); > + if (!mdio->irq[*addr]) > + mdio->irq[*addr] = PHY_POLL; > + } > + > + phy = get_phy_device(mdio, *addr); > + if (!phy) { > + dev_err(&mdio->dev, "error probing PHY at address %i\n", > + *addr); > + continue; > + } > + phy_scan_fixups(phy); > + > + /* Associate the OF node with the device structure so it > + * can be looked up later */ > + of_node_get(child); > + dev_archdata_set_node(&phy->dev.archdata, child); > + > + /* All data is now stored in the phy struct; register it */ > + rc = phy_device_register(phy); > + if (rc) { > + phy_device_free(phy); > + of_node_put(child); > + continue; > + } > + > + dev_dbg(&mdio->dev, "registered phy %s at address %i\n", > + child->name, *addr); > + } > + > + return 0; > +} > +EXPORT_SYMBOL(of_mdiobus_register); > + > +/** > + * of_phy_connect - Connect to the phy described in the device tree > + * @dev: pointer to net_device claiming the phy > + * @phy_np: Pointer to device tree node for the PHY > + * @hndlr: Link state callback for the network device > + * @iface: PHY data interface type > + * > + * Returns a pointer to the phy_device if successfull. NULL otherwise > + */ > +struct phy_device *of_phy_connect(struct net_device *dev, > + struct device_node *phy_np, > + void (*hndlr)(struct net_device *), u32 flags, > + phy_interface_t iface) > +{ > + int match(struct device *dev, void *phy_np) > + { > + return dev_archdata_get_node(&dev->archdata) == phy_np; > + } > + struct device *d; > + int rc; > + > + if (!phy_np) > + return NULL; > + > + d = bus_find_device(&mdio_bus_type, NULL, phy_np, match); > + if (!d) > + return NULL; > + > + rc = phy_connect_direct(dev, to_phy_device(d), hndlr, flags, iface); > + if (rc) > + return NULL; > + > + return to_phy_device(d); > +} > +EXPORT_SYMBOL(of_phy_connect); > diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h > new file mode 100644 > index 0000000..ec092cc > --- /dev/null > +++ b/include/linux/of_mdio.h > @@ -0,0 +1,21 @@ > +/* > + * OF helpers for the MDIO (Ethernet PHY) API > + * > + * Copyright (c) 2009 Secret Lab Technologies, Ltd. > + * > + * This file is released under the GPLv2 > + */ > + > +#ifndef __LINUX_OF_MDIO_H > +#define __LINUX_OF_MDIO_H > + > +#include <linux/phy.h> > +#include <linux/of.h> > + > +extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np); > +extern struct phy_device *of_phy_connect(struct net_device *dev, > + struct device_node *phy_np, > + void (*hndlr)(struct net_device *), > + u32 flags, phy_interface_t iface); > + > +#endif /* __LINUX_OF_MDIO_H */ > >
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index f821dbc..6fe043b 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -19,3 +19,9 @@ config OF_SPI depends on OF && PPC_OF && SPI help OpenFirmware SPI accessors + +config OF_MDIO + def_tristate PHYLIB + depends on OF && PHYLIB + help + OpenFirmware MDIO bus (Ethernet PHY) accessors diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 4c3c6f8..bdfb5f5 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -3,3 +3,4 @@ obj-$(CONFIG_OF_DEVICE) += device.o platform.o obj-$(CONFIG_OF_GPIO) += gpio.o obj-$(CONFIG_OF_I2C) += of_i2c.o obj-$(CONFIG_OF_SPI) += of_spi.o +obj-$(CONFIG_OF_MDIO) += of_mdio.o diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c new file mode 100644 index 0000000..6f3038a --- /dev/null +++ b/drivers/of/of_mdio.c @@ -0,0 +1,130 @@ +/* + * OF helpers for the MDIO (Ethernet PHY) API + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * + * This file is released under the GPLv2 + * + * This file provides helper functions for extracting PHY device information + * out of the OpenFirmware device tree and using it to populate an mii_bus. + */ + +#include <linux/phy.h> +#include <linux/of.h> +#include <linux/of_mdio.h> +#include <linux/module.h> + +MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); +MODULE_LICENSE("GPL"); + +/** + * of_mdiobus_register - Register mii_bus and create PHYs from the device tree + * @mdio: pointer to mii_bus structure + * @np: pointer to device_node of MDIO bus. + * + * This function registers the mii_bus structure and registers a phy_device + * for each child node of @np. + */ +int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) +{ + struct phy_device *phy; + struct device_node *child; + int rc, i; + + /* Mask out all PHYs from auto probing. Instead the PHYs listed in + * the device tree are populated after the bus has been registered */ + mdio->phy_mask = ~0; + + /* Clear all the IRQ properties */ + if (mdio->irq) + for (i=0; i<PHY_MAX_ADDR; i++) + mdio->irq[i] = PHY_POLL; + + /* Register the MDIO bus */ + rc = mdiobus_register(mdio); + if (rc) + return rc; + + /* Loop over the child nodes and register a phy_device for each one */ + for_each_child_of_node(np, child) { + const u32 *addr; + int len; + + /* A PHY must have a reg property in the range [0-31] */ + addr = of_get_property(child, "reg", &len); + if (!addr || len < sizeof(*addr) || *addr >= 32 || *addr < 0) { + dev_err(&mdio->dev, "%s has invalid PHY address\n", + child->full_name); + continue; + } + + if (mdio->irq) { + mdio->irq[*addr] = irq_of_parse_and_map(child, 0); + if (!mdio->irq[*addr]) + mdio->irq[*addr] = PHY_POLL; + } + + phy = get_phy_device(mdio, *addr); + if (!phy) { + dev_err(&mdio->dev, "error probing PHY at address %i\n", + *addr); + continue; + } + phy_scan_fixups(phy); + + /* Associate the OF node with the device structure so it + * can be looked up later */ + of_node_get(child); + dev_archdata_set_node(&phy->dev.archdata, child); + + /* All data is now stored in the phy struct; register it */ + rc = phy_device_register(phy); + if (rc) { + phy_device_free(phy); + of_node_put(child); + continue; + } + + dev_dbg(&mdio->dev, "registered phy %s at address %i\n", + child->name, *addr); + } + + return 0; +} +EXPORT_SYMBOL(of_mdiobus_register); + +/** + * of_phy_connect - Connect to the phy described in the device tree + * @dev: pointer to net_device claiming the phy + * @phy_np: Pointer to device tree node for the PHY + * @hndlr: Link state callback for the network device + * @iface: PHY data interface type + * + * Returns a pointer to the phy_device if successfull. NULL otherwise + */ +struct phy_device *of_phy_connect(struct net_device *dev, + struct device_node *phy_np, + void (*hndlr)(struct net_device *), u32 flags, + phy_interface_t iface) +{ + int match(struct device *dev, void *phy_np) + { + return dev_archdata_get_node(&dev->archdata) == phy_np; + } + struct device *d; + int rc; + + if (!phy_np) + return NULL; + + d = bus_find_device(&mdio_bus_type, NULL, phy_np, match); + if (!d) + return NULL; + + rc = phy_connect_direct(dev, to_phy_device(d), hndlr, flags, iface); + if (rc) + return NULL; + + return to_phy_device(d); +} +EXPORT_SYMBOL(of_phy_connect); diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h new file mode 100644 index 0000000..ec092cc --- /dev/null +++ b/include/linux/of_mdio.h @@ -0,0 +1,21 @@ +/* + * OF helpers for the MDIO (Ethernet PHY) API + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_MDIO_H +#define __LINUX_OF_MDIO_H + +#include <linux/phy.h> +#include <linux/of.h> + +extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np); +extern struct phy_device *of_phy_connect(struct net_device *dev, + struct device_node *phy_np, + void (*hndlr)(struct net_device *), + u32 flags, phy_interface_t iface); + +#endif /* __LINUX_OF_MDIO_H */