@@ -57,36 +57,11 @@
#define FEC_ALIGNMENT 0x3
#endif
-#if defined CONFIG_M5272 || defined CONFIG_M527x || defined CONFIG_M523x \
- || defined CONFIG_M528x || defined CONFIG_M532x || defined CONFIG_M520x
-#define FEC_LEGACY
/*
* Define the fixed address of the FEC hardware.
*/
#if defined(CONFIG_M5272)
#define HAVE_mii_link_interrupt
-#endif
-
-#if defined(CONFIG_FEC2)
-#define FEC_MAX_PORTS 2
-#else
-#define FEC_MAX_PORTS 1
-#endif
-
-static unsigned int fec_hw[] = {
-#if defined(CONFIG_M5272)
- (MCF_MBAR + 0x840),
-#elif defined(CONFIG_M527x)
- (MCF_MBAR + 0x1000),
- (MCF_MBAR + 0x1800),
-#elif defined(CONFIG_M523x) || defined(CONFIG_M528x)
- (MCF_MBAR + 0x1000),
-#elif defined(CONFIG_M520x)
- (MCF_MBAR+0x30000),
-#elif defined(CONFIG_M532x)
- (MCF_MBAR+0xfc030000),
-#endif
-};
static unsigned char fec_mac_default[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -109,8 +84,7 @@ static unsigned char fec_mac_default[] =
#else
#define FEC_FLASHMAC 0
#endif
-
-#endif /* FEC_LEGACY */
+#endif /* CONFIG_M5272 */
/* Forward declarations of some structures to support different PHYs
*/
@@ -1242,89 +1216,14 @@ static phy_info_t const * const phy_info
#ifdef HAVE_mii_link_interrupt
static irqreturn_t
mii_link_interrupt(int irq, void * dev_id);
-#endif
-#if defined(CONFIG_M5272)
/*
- * Code specific to Coldfire 5272 setup.
+ * This is specific to the MII interrupt setup of the M5272EVB.
*/
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- volatile unsigned long *icrp;
- static const struct idesc {
- char *name;
- unsigned short irq;
- irq_handler_t handler;
- } *idp, id[] = {
- { "fec(RX)", 86, fec_enet_interrupt },
- { "fec(TX)", 87, fec_enet_interrupt },
- { "fec(OTHER)", 88, fec_enet_interrupt },
- { "fec(MII)", 66, mii_link_interrupt },
- { NULL },
- };
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(idp->irq, idp->handler, IRQF_DISABLED, idp->name, dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, idp->irq);
- }
-
- /* Unmask interrupt at ColdFire 5272 SIM */
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR3);
- *icrp = 0x00000ddd;
- icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
- *icrp = 0x0d000000;
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
+static void __inline__ fec_request_mii_intr(struct net_device *dev)
{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5272 manual section 11.5.8: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 4) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = (unsigned char *)FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
+ if (request_irq(66, mii_link_interrupt, IRQF_DISABLED, "fec(MII)", dev) != 0)
+ printk("FEC: Could not allocate fec(MII) IRQ(66)!\n");
}
static void __inline__ fec_disable_phy_intr(void)
@@ -1341,344 +1240,9 @@ static void __inline__ fec_phy_ack_intr(
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
*icrp = 0x0d000000;
}
-
-/* ------------------------------------------------------------------------- */
-
-#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
-
-/*
- * Code specific to Coldfire 5230/5231/5232/5234/5235,
- * the 5270/5271/5274/5275 and 5280/5282 setups.
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 23 },
- { "fec(RXF)", 27 },
- { "fec(MII)", 29 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = (fep->index) ? 128 : 64;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name, dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts at ColdFire 5280/5282 interrupt controller */
- {
- volatile unsigned char *icrp;
- volatile unsigned long *imrp;
- int i, ilip;
-
- b = (fep->index) ? MCFICM_INTC1 : MCFICM_INTC0;
- icrp = (volatile unsigned char *) (MCF_IPSBAR + b +
- MCFINTC_ICR0);
- for (i = 23, ilip = 0x28; (i < 36); i++)
- icrp[i] = ilip--;
-
- imrp = (volatile unsigned long *) (MCF_IPSBAR + b +
- MCFINTC_IMRH);
- *imrp &= ~0x0000000f;
- imrp = (volatile unsigned long *) (MCF_IPSBAR + b +
- MCFINTC_IMRL);
- *imrp &= ~0xff800001;
- }
-
-#if defined(CONFIG_M528x)
- /* Set up gpio outputs for MII lines */
- {
- volatile u16 *gpio_paspar;
- volatile u8 *gpio_pehlpar;
-
- gpio_paspar = (volatile u16 *) (MCF_IPSBAR + 0x100056);
- gpio_pehlpar = (volatile u16 *) (MCF_IPSBAR + 0x100058);
- *gpio_paspar |= 0x0f00;
- *gpio_pehlpar = 0xc0;
- }
#endif
-#if defined(CONFIG_M527x)
- /* Set up gpio outputs for MII lines */
- {
- volatile u8 *gpio_par_fec;
- volatile u16 *gpio_par_feci2c;
-
- gpio_par_feci2c = (volatile u16 *)(MCF_IPSBAR + 0x100082);
- /* Set up gpio outputs for FEC0 MII lines */
- gpio_par_fec = (volatile u8 *)(MCF_IPSBAR + 0x100078);
-
- *gpio_par_feci2c |= 0x0f00;
- *gpio_par_fec |= 0xc0;
-
-#if defined(CONFIG_FEC2)
- /* Set up gpio outputs for FEC1 MII lines */
- gpio_par_fec = (volatile u8 *)(MCF_IPSBAR + 0x100079);
-
- *gpio_par_feci2c |= 0x00a0;
- *gpio_par_fec |= 0xc0;
-#endif /* CONFIG_FEC2 */
- }
-#endif /* CONFIG_M527x */
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5282 manual section 17.5.4.7: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-
-#elif defined(CONFIG_M520x)
-/*
- * Code specific to Coldfire 520x
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 23 },
- { "fec(RXF)", 27 },
- { "fec(MII)", 29 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = 64 + 13;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n", idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts at ColdFire interrupt controller */
- {
- volatile unsigned char *icrp;
- volatile unsigned long *imrp;
-
- icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 +
- MCFINTC_ICR0);
- for (b = 36; (b < 49); b++)
- icrp[b] = 0x04;
- imrp = (volatile unsigned long *) (MCF_IPSBAR + MCFICM_INTC0 +
- MCFINTC_IMRH);
- *imrp &= ~0x0001FFF0;
- }
- *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FEC) |= 0xf0;
- *(volatile unsigned char *)(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C) |= 0x0f;
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- * See 5282 manual section 17.5.4.7: MSCR
- */
- fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
-static void __inline__ fec_get_mac(struct net_device *dev)
-{
- struct fec_enet_private *fep = netdev_priv(dev);
- volatile fec_t *fecp;
- unsigned char *iap, tmpaddr[ETH_ALEN];
-
- fecp = fep->hwp;
-
- if (FEC_FLASHMAC) {
- /*
- * Get MAC address from FLASH.
- * If it is all 1's or 0's, use the default.
- */
- iap = FEC_FLASHMAC;
- if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
- (iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
- iap = fec_mac_default;
- if ((iap[0] == 0xff) && (iap[1] == 0xff) && (iap[2] == 0xff) &&
- (iap[3] == 0xff) && (iap[4] == 0xff) && (iap[5] == 0xff))
- iap = fec_mac_default;
- } else {
- *((unsigned long *) &tmpaddr[0]) = fecp->fec_addr_low;
- *((unsigned short *) &tmpaddr[4]) = (fecp->fec_addr_high >> 16);
- iap = &tmpaddr[0];
- }
-
- memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- /* Adjust MAC if using default MAC address */
- if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
-}
-
-/* ------------------------------------------------------------------------- */
-#elif defined(CONFIG_M532x)
-/*
- * Code specific for M532x
- */
-static void __inline__ fec_request_intrs(struct net_device *dev)
-{
- struct fec_enet_private *fep;
- int b;
- static const struct idesc {
- char *name;
- unsigned short irq;
- } *idp, id[] = {
- { "fec(TXF)", 36 },
- { "fec(RXF)", 40 },
- { "fec(MII)", 42 },
- { NULL },
- };
-
- fep = netdev_priv(dev);
- b = (fep->index) ? 128 : 64;
-
- /* Setup interrupt handlers. */
- for (idp = id; idp->name; idp++) {
- if (request_irq(b+idp->irq, fec_enet_interrupt, IRQF_DISABLED, idp->name,dev) != 0)
- printk("FEC: Could not allocate %s IRQ(%d)!\n",
- idp->name, b+idp->irq);
- }
-
- /* Unmask interrupts */
- MCF_INTC0_ICR36 = 0x2;
- MCF_INTC0_ICR37 = 0x2;
- MCF_INTC0_ICR38 = 0x2;
- MCF_INTC0_ICR39 = 0x2;
- MCF_INTC0_ICR40 = 0x2;
- MCF_INTC0_ICR41 = 0x2;
- MCF_INTC0_ICR42 = 0x2;
- MCF_INTC0_ICR43 = 0x2;
- MCF_INTC0_ICR44 = 0x2;
- MCF_INTC0_ICR45 = 0x2;
- MCF_INTC0_ICR46 = 0x2;
- MCF_INTC0_ICR47 = 0x2;
- MCF_INTC0_ICR48 = 0x2;
-
- MCF_INTC0_IMRH &= ~(
- MCF_INTC_IMRH_INT_MASK36 |
- MCF_INTC_IMRH_INT_MASK37 |
- MCF_INTC_IMRH_INT_MASK38 |
- MCF_INTC_IMRH_INT_MASK39 |
- MCF_INTC_IMRH_INT_MASK40 |
- MCF_INTC_IMRH_INT_MASK41 |
- MCF_INTC_IMRH_INT_MASK42 |
- MCF_INTC_IMRH_INT_MASK43 |
- MCF_INTC_IMRH_INT_MASK44 |
- MCF_INTC_IMRH_INT_MASK45 |
- MCF_INTC_IMRH_INT_MASK46 |
- MCF_INTC_IMRH_INT_MASK47 |
- MCF_INTC_IMRH_INT_MASK48 );
-
- /* Set up gpio outputs for MII lines */
- MCF_GPIO_PAR_FECI2C |= (0 |
- MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
- MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
- MCF_GPIO_PAR_FEC = (0 |
- MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
- MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
-}
-
-static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_private *fep)
-{
- volatile fec_t *fecp;
-
- fecp = fep->hwp;
- fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
- fecp->fec_x_cntrl = 0x00;
-
- /*
- * Set MII speed to 2.5 MHz
- */
- fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2;
- fecp->fec_mii_speed = fep->phy_speed;
-
- fec_restart(dev, 0);
-}
-
+#ifdef CONFIG_M5272
static void __inline__ fec_get_mac(struct net_device *dev)
{
struct fec_enet_private *fep = netdev_priv(dev);
@@ -1692,7 +1256,7 @@ static void __inline__ fec_get_mac(struc
* Get MAC address from FLASH.
* If it is all 1's or 0's, use the default.
*/
- iap = FEC_FLASHMAC;
+ iap = (unsigned char *)FEC_FLASHMAC;
if ((iap[0] == 0) && (iap[1] == 0) && (iap[2] == 0) &&
(iap[3] == 0) && (iap[4] == 0) && (iap[5] == 0))
iap = fec_mac_default;
@@ -1709,17 +1273,8 @@ static void __inline__ fec_get_mac(struc
/* Adjust MAC if using default MAC address */
if (iap == fec_mac_default)
- dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
-}
-
-static void __inline__ fec_disable_phy_intr(void)
-{
-}
-
-static void __inline__ fec_phy_ack_intr(void)
-{
+ dev->dev_addr[ETH_ALEN-1] = fec_mac_default[ETH_ALEN-1] + fep->index;
}
-
#endif
/* ------------------------------------------------------------------------- */
@@ -1925,7 +1480,7 @@ mii_discover_phy(uint mii_reg, struct ne
printk("FEC: No PHY device found.\n");
/* Disable external MII interface */
fecp->fec_mii_speed = fep->phy_speed = 0;
-#ifdef FREC_LEGACY
+#ifdef HAVE_mii_link_interrupt
fec_disable_phy_intr();
#endif
}
@@ -2148,7 +1703,7 @@ int __init fec_enet_init(struct net_devi
udelay(10);
/* Set the Ethernet address */
-#ifdef FEC_LEGACY
+#ifdef CONFIG_M5272
fec_get_mac(dev);
#else
{
@@ -2231,11 +1786,8 @@ int __init fec_enet_init(struct net_devi
fecp->fec_r_des_start = fep->bd_dma;
fecp->fec_x_des_start = (unsigned long)fep->bd_dma + sizeof(cbd_t) * RX_RING_SIZE;
-#ifdef FEC_LEGACY
- /* Install our interrupt handlers. This varies depending on
- * the architecture.
- */
- fec_request_intrs(dev);
+#ifdef HAVE_mii_link_interrupt
+ fec_request_mii_intr(dev);
#endif
fecp->fec_grp_hash_table_high = 0;
@@ -2261,9 +1813,6 @@ int __init fec_enet_init(struct net_devi
mii_free = mii_cmds;
/* setup MII interface */
-#ifdef FEC_LEGACY
- fec_set_mii(dev, fep);
-#else
fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;
fecp->fec_x_cntrl = 0x00;
@@ -2274,7 +1823,6 @@ int __init fec_enet_init(struct net_devi
/ 2500000) / 2) & 0x3F) << 1;
fecp->fec_mii_speed = fep->phy_speed;
fec_restart(dev, 0);
-#endif
/* Clear and enable interrupts */
fecp->fec_ievent = 0xffc00000;
@@ -2437,36 +1985,6 @@ fec_stop(struct net_device *dev)
fecp->fec_mii_speed = fep->phy_speed;
}
-#ifdef FEC_LEGACY
-static int __init fec_enet_module_init(void)
-{
- struct net_device *dev;
- int i, err;
-
- printk("FEC ENET Version 0.2\n");
-
- for (i = 0; (i < FEC_MAX_PORTS); i++) {
- dev = alloc_etherdev(sizeof(struct fec_enet_private));
- if (!dev)
- return -ENOMEM;
- dev->base_addr = (unsigned long)fec_hw[i];
- err = fec_enet_init(dev, i);
- if (err) {
- free_netdev(dev);
- continue;
- }
- if (register_netdev(dev) != 0) {
- /* XXX: missing cleanup here */
- free_netdev(dev);
- return -EIO;
- }
-
- printk("%s: ethernet %pM\n", dev->name, dev->dev_addr);
- }
- return 0;
-}
-#else
-
static int __devinit
fec_probe(struct platform_device *pdev)
{
@@ -2627,9 +2145,6 @@ fec_enet_cleanup(void)
}
module_exit(fec_enet_cleanup);
-
-#endif /* FEC_LEGACY */
-
module_init(fec_enet_module_init);
MODULE_LICENSE("GPL");
m68knommu: remove ColdFire specific setup code from FEC driver Remove the ColdFire CPU specific setup from here. The ColdFire CPU platform code now sets up all this. Signed-off-by: Greg Ungerer <gerg@uclinux.org> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html