@@ -6107,6 +6107,21 @@ static int bnxt_get_func_stat_ctxs(struct bnxt *bp)
return cp + ulp_stat;
}
+/* Check if a default RSS map needs to be setup. This function is only
+ * used on older firmware that does not require reserving RX rings.
+ */
+static void bnxt_check_rss_tbl_no_rmgr(struct bnxt *bp)
+{
+ struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
+
+ /* The RSS map is valid for RX rings set to resv_rx_rings */
+ if (hw_resc->resv_rx_rings != bp->rx_nr_rings) {
+ hw_resc->resv_rx_rings = bp->rx_nr_rings;
+ if (!netif_is_rxfh_configured(bp->dev))
+ bnxt_set_dflt_rss_indir_tbl(bp);
+ }
+}
+
static bool bnxt_need_reserve_rings(struct bnxt *bp)
{
struct bnxt_hw_resc *hw_resc = &bp->hw_resc;
@@ -6115,22 +6130,28 @@ static bool bnxt_need_reserve_rings(struct bnxt *bp)
int rx = bp->rx_nr_rings, stat;
int vnic = 1, grp = rx;
- if (bp->hwrm_spec_code < 0x10601)
- return false;
-
- if (hw_resc->resv_tx_rings != bp->tx_nr_rings)
+ if (hw_resc->resv_tx_rings != bp->tx_nr_rings &&
+ bp->hwrm_spec_code >= 0x10601)
return true;
+ /* Old firmware does not need RX ring reservations but we still
+ * need to setup a default RSS map when needed. With new firmware
+ * we go through RX ring reservations first and then set up the
+ * RSS map for the successfully reserved RX rings when needed.
+ */
+ if (!BNXT_NEW_RM(bp)) {
+ bnxt_check_rss_tbl_no_rmgr(bp);
+ return false;
+ }
if ((bp->flags & BNXT_FLAG_RFS) && !(bp->flags & BNXT_FLAG_CHIP_P5))
vnic = rx + 1;
if (bp->flags & BNXT_FLAG_AGG_RINGS)
rx <<= 1;
stat = bnxt_get_func_stat_ctxs(bp);
- if (BNXT_NEW_RM(bp) &&
- (hw_resc->resv_rx_rings != rx || hw_resc->resv_cp_rings != cp ||
- hw_resc->resv_vnics != vnic || hw_resc->resv_stat_ctxs != stat ||
- (hw_resc->resv_hw_ring_grps != grp &&
- !(bp->flags & BNXT_FLAG_CHIP_P5))))
+ if (hw_resc->resv_rx_rings != rx || hw_resc->resv_cp_rings != cp ||
+ hw_resc->resv_vnics != vnic || hw_resc->resv_stat_ctxs != stat ||
+ (hw_resc->resv_hw_ring_grps != grp &&
+ !(bp->flags & BNXT_FLAG_CHIP_P5)))
return true;
if ((bp->flags & BNXT_FLAG_CHIP_P5) && BNXT_PF(bp) &&
hw_resc->resv_irqs != nq)
The recent changes to support user-defined RSS map assume that RX rings are always reserved and the default RSS map is set after the RX rings are successfully reserved. If the firmware spec is older than 1.6.1, no ring reservations are required and the default RSS map is not setup at all. In another scenario where the fw Resource Manager is older, RX rings are not reserved and we also end up with no valid RSS map. Fix both issues in bnxt_need_reserve_rings(). In both scenarios described above, we don't need to reserve RX rings so we need to call this new function bnxt_check_rss_map_no_rmgr() to setup the default RSS map when needed. Without valid RSS map, the NIC won't receive packets properly. Fixes: 1667cbf6a4eb ("bnxt_en: Add logical RSS indirection table structure.") Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 39 ++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 9 deletions(-)