diff mbox series

[net-next,10/15] bnxt_en: Refactor the initialization of the ethtool link settings.

Message ID 1574497570-22102-11-git-send-email-michael.chan@broadcom.com
State Changes Requested
Delegated to: David Miller
Headers show
Series bnxt_en: Updates. | expand

Commit Message

Michael Chan Nov. 23, 2019, 8:26 a.m. UTC 
Refactor this logic in bnxt_probe_phy() into a separate function
bnxt_init_ethtool_link_settings().  It used to be that the settable
link settings will never be changed without going through ethtool.
So we only needed to do this once in bnxt_probe_phy().  Now, another
function sharing the port may change it and we may need to re-initialize
the ethtool settings again in run-time.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 46 +++++++++++++++++--------------
 1 file changed, 26 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 9d02232..1b86ba8 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10249,6 +10249,31 @@  static void bnxt_chk_missed_irq(struct bnxt *bp)
 
 static void bnxt_cfg_ntp_filters(struct bnxt *);
 
+static void bnxt_init_ethtool_link_settings(struct bnxt *bp)
+{
+	struct bnxt_link_info *link_info = &bp->link_info;
+
+	if (BNXT_AUTO_MODE(link_info->auto_mode)) {
+		link_info->autoneg = BNXT_AUTONEG_SPEED;
+		if (bp->hwrm_spec_code >= 0x10201) {
+			if (link_info->auto_pause_setting &
+			    PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE)
+				link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
+		} else {
+			link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
+		}
+		link_info->advertising = link_info->auto_link_speeds;
+	} else {
+		link_info->req_link_speed = link_info->force_link_speed;
+		link_info->req_duplex = link_info->duplex_setting;
+	}
+	if (link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL)
+		link_info->req_flow_ctrl =
+			link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH;
+	else
+		link_info->req_flow_ctrl = link_info->force_pause_setting;
+}
+
 static void bnxt_sp_task(struct work_struct *work)
 {
 	struct bnxt *bp = container_of(work, struct bnxt, sp_task);
@@ -11411,26 +11436,7 @@  static int bnxt_probe_phy(struct bnxt *bp, bool fw_dflt)
 	if (!fw_dflt)
 		return 0;
 
-	/*initialize the ethool setting copy with NVM settings */
-	if (BNXT_AUTO_MODE(link_info->auto_mode)) {
-		link_info->autoneg = BNXT_AUTONEG_SPEED;
-		if (bp->hwrm_spec_code >= 0x10201) {
-			if (link_info->auto_pause_setting &
-			    PORT_PHY_CFG_REQ_AUTO_PAUSE_AUTONEG_PAUSE)
-				link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
-		} else {
-			link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
-		}
-		link_info->advertising = link_info->auto_link_speeds;
-	} else {
-		link_info->req_link_speed = link_info->force_link_speed;
-		link_info->req_duplex = link_info->duplex_setting;
-	}
-	if (link_info->autoneg & BNXT_AUTONEG_FLOW_CTRL)
-		link_info->req_flow_ctrl =
-			link_info->auto_pause_setting & BNXT_LINK_PAUSE_BOTH;
-	else
-		link_info->req_flow_ctrl = link_info->force_pause_setting;
+	bnxt_init_ethtool_link_settings(bp);
 	return 0;
 }