diff mbox series

[net,3/3] dt-bindings: doc: add new properties forof_get_mac_address from nvmem

Message ID 1557476567-17397-4-git-send-email-fugang.duan@nxp.com
State Changes Requested
Delegated to: David Miller
Headers show
Series add property "nvmem_macaddr_swap" to swap macaddrbytes order | expand

Commit Message

Andy Duan May 10, 2019, 8:24 a.m. UTC 
Currently, of_get_mac_address supports NVMEM, some platforms
MAC address that read from NVMEM efuse requires to swap bytes
order, so add new property "nvmem_macaddr_swap" to specify the
behavior. If the MAC address is valid from NVMEM, add new property
"nvmem-mac-address" in ethernet node.

Update these two properties in the binding documentation.

Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
---
 Documentation/devicetree/bindings/net/ethernet.txt | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index e88c364..921364a 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -10,8 +10,11 @@  Documentation/devicetree/bindings/phy/phy-bindings.txt.
   property;
 - local-mac-address: array of 6 bytes, specifies the MAC address that was
   assigned to the network device;
+- nvmem-mac-address: array of 6 bytes, specifies the MAC address that was
+  read from nvmem-cells and dynamically add the property in device node;
 - nvmem-cells: phandle, reference to an nvmem node for the MAC address
 - nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
+- nvmem_macaddr_swap: swap bytes order for the 6 bytes of MAC address
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
   the maximum frame size (there's contradiction in the Devicetree