@@ -819,6 +819,7 @@ struct sge {
u16 nqs_per_uld; /* # of Rx queues per ULD */
u16 timer_val[SGE_NTIMERS];
u8 counter_val[SGE_NCOUNTERS];
+ u16 dbqtimer_tick;
u16 dbqtimer_val[SGE_NDBQTIMERS];
u32 fl_pg_order; /* large page allocation size */
u32 stat_len; /* length of status page at ring end */
@@ -932,11 +932,190 @@ static int get_adaptive_rx_setting(struct net_device *dev)
return q->rspq.adaptive_rx;
}
-static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+/* Return the current global Adapter SGE Doorbell Queue Timer Tick for all
+ * Ethernet TX Queues.
+ */
+static int get_dbqtimer_tick(struct net_device *dev)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+
+ if (!(adap->flags & SGE_DBQ_TIMER))
+ return 0;
+
+ return adap->sge.dbqtimer_tick;
+}
+
+/* Return the SGE Doorbell Queue Timer Value for the Ethernet TX Queues
+ * associated with a Network Device.
+ */
+static int get_dbqtimer(struct net_device *dev)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+ struct sge_eth_txq *txq;
+
+ txq = &adap->sge.ethtxq[pi->first_qset];
+
+ if (!(adap->flags & SGE_DBQ_TIMER))
+ return 0;
+
+ /* all of the TX Queues use the same Timer Index */
+ return adap->sge.dbqtimer_val[txq->dbqtimerix];
+}
+
+/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX
+ * Queues. This is the fundamental "Tick" that sets the scale of values which
+ * can be used. Individual Ethernet TX Queues index into a relatively small
+ * array of Tick Multipliers. Changing the base Tick will thus change all of
+ * the resulting Timer Values associated with those multipliers for all
+ * Ethernet TX Queues.
+ */
+static int set_dbqtimer_tick(struct net_device *dev, int usecs)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+ struct sge *s = &adap->sge;
+ u32 param, val;
+ int ret;
+
+ if (!(adap->flags & SGE_DBQ_TIMER))
+ return 0;
+
+ /* return early if it's the same Timer Tick we're already using */
+ if (s->dbqtimer_tick == usecs)
+ return 0;
+
+ /* attempt to set the new Timer Tick value */
+ param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK));
+ val = usecs;
+ ret = t4_set_params(adap, adap->mbox, adap->pf, 0, 1, ¶m, &val);
+ if (ret)
+ return ret;
+ s->dbqtimer_tick = usecs;
+
+ /* if successful, reread resulting dependent Timer values */
+ ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(s->dbqtimer_val),
+ s->dbqtimer_val);
+ return ret;
+}
+
+/* Set the SGE Doorbell Queue Timer Value for the Ethernet TX Queues
+ * associated with a Network Device. There is a relatively small array of
+ * possible Timer Values so we need to pick the closest value available.
+ */
+static int set_dbqtimer(struct net_device *dev, int usecs)
+{
+ int qix, timerix, min_timerix, delta, min_delta;
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+ struct sge *s = &adap->sge;
+ struct sge_eth_txq *txq;
+ u32 param, val;
+ int ret;
+
+ if (!(adap->flags & SGE_DBQ_TIMER))
+ return 0;
+
+ /* Find the SGE Doorbell Timer Value that's closest to the requested
+ * value.
+ */
+ min_delta = INT_MAX;
+ min_timerix = 0;
+ for (timerix = 0; timerix < ARRAY_SIZE(s->dbqtimer_val); timerix++) {
+ delta = s->dbqtimer_val[timerix] - usecs;
+ if (delta < 0)
+ delta = -delta;
+ if (delta < min_delta) {
+ min_delta = delta;
+ min_timerix = timerix;
+ }
+ }
+
+ /* Return early if it's the same Timer Index we're already using.
+ * We use the same Timer Index for all of the TX Queues for an
+ * interface so it's only necessary to check the first one.
+ */
+ txq = &s->ethtxq[pi->first_qset];
+ if (txq->dbqtimerix == min_timerix)
+ return 0;
+
+ for (qix = 0; qix < pi->nqsets; qix++, txq++) {
+ if (adap->flags & FULL_INIT_DONE) {
+ param =
+ (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DMAQ) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DMAQ_EQ_TIMERIX) |
+ FW_PARAMS_PARAM_YZ_V(txq->q.cntxt_id));
+ val = min_timerix;
+ ret = t4_set_params(adap, adap->mbox, adap->pf, 0,
+ 1, ¶m, &val);
+ if (ret)
+ return ret;
+ }
+ txq->dbqtimerix = min_timerix;
+ }
+ return 0;
+}
+
+/* Set the global Adapter SGE Doorbell Queue Timer Tick for all Ethernet TX
+ * Queues and the Timer Value for the Ethernet TX Queues associated with a
+ * Network Device. Since changing the global Tick changes all of the
+ * available Timer Values, we need to do this first before selecting the
+ * resulting closest Timer Value. Moreover, since the Tick is global,
+ * changing it affects the Timer Values for all Network Devices on the
+ * adapter. So, before changing the Tick, we grab all of the current Timer
+ * Values for other Network Devices on this Adapter and then attempt to select
+ * new Timer Values which are close to the old values ...
+ */
+static int set_dbqtimer_tickval(struct net_device *dev,
+ int tick_usecs, int timer_usecs)
+{
+ struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = pi->adapter;
+ int timer[MAX_NPORTS];
+ unsigned int port;
+ int ret;
+
+ /* Grab the other adapter Network Interface current timers and fill in
+ * the new one for this Network Interface.
+ */
+ for_each_port(adap, port)
+ if (port == pi->port_id)
+ timer[port] = timer_usecs;
+ else
+ timer[port] = get_dbqtimer(adap->port[port]);
+
+ /* Change the global Tick first ... */
+ ret = set_dbqtimer_tick(dev, tick_usecs);
+ if (ret)
+ return ret;
+
+ /* ... and then set all of the Network Interface Timer Values ... */
+ for_each_port(adap, port) {
+ ret = set_dbqtimer(adap->port[port], timer[port]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *coalesce)
{
- set_adaptive_rx_setting(dev, c->use_adaptive_rx_coalesce);
- return set_rx_intr_params(dev, c->rx_coalesce_usecs,
- c->rx_max_coalesced_frames);
+ int ret;
+
+ set_adaptive_rx_setting(dev, coalesce->use_adaptive_rx_coalesce);
+
+ ret = set_rx_intr_params(dev, coalesce->rx_coalesce_usecs,
+ coalesce->rx_max_coalesced_frames);
+ if (ret)
+ return ret;
+
+ return set_dbqtimer_tickval(dev,
+ coalesce->tx_coalesce_usecs_irq,
+ coalesce->tx_coalesce_usecs);
}
static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
@@ -949,6 +1128,8 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
c->rx_max_coalesced_frames = (rq->intr_params & QINTR_CNT_EN_F) ?
adap->sge.counter_val[rq->pktcnt_idx] : 0;
c->use_adaptive_rx_coalesce = get_adaptive_rx_setting(dev);
+ c->tx_coalesce_usecs_irq = get_dbqtimer_tick(dev);
+ c->tx_coalesce_usecs = get_dbqtimer(dev);
return 0;
}
@@ -4331,8 +4331,18 @@ static int adap_init0(struct adapter *adap)
/* Grab the SGE Doorbell Queue Timer values. If successful, that
* indicates that the Firmware and Hardware support this.
*/
- ret = t4_read_sge_dbqtimers(adap, ARRAY_SIZE(adap->sge.dbqtimer_val),
- adap->sge.dbqtimer_val);
+ params[0] = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
+ FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMERTICK));
+ ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
+ 1, params, val);
+
+ if (!ret) {
+ adap->sge.dbqtimer_tick = val[0];
+ ret = t4_read_sge_dbqtimers(adap,
+ ARRAY_SIZE(adap->sge.dbqtimer_val),
+ adap->sge.dbqtimer_val);
+ }
+
if (!ret)
adap->flags |= SGE_DBQ_TIMER;
This patch gets/sets SGE Doorbell Queue timer ticks via ethtool Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 1 + drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 189 ++++++++++++++++++++- drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 14 +- 3 files changed, 198 insertions(+), 6 deletions(-)