diff mbox series

[v4,net-next,5/6] net: dsa: microchip: break KSZ9477 DSA driver into two files

Message ID 1542758110-1037-6-git-send-email-Tristram.Ha@microchip.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series net: dsa: microchip: Modify KSZ9477 DSA driver in preparation to add other KSZ switch drivers | expand

Commit Message

Tristram.Ha@microchip.com Nov. 20, 2018, 11:55 p.m. UTC
From: Tristram Ha <Tristram.Ha@microchip.com>

Break KSZ9477 DSA driver into two files in preparation to add more KSZ
switch drivers.
Add common functions in ksz_common.h so that other KSZ switch drivers
can access code in ksz_common.c.
Add ksz_spi.h for common functions used by KSZ switch SPI drivers.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Woojung Huh <Woojung.Huh@microchip.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/dsa/microchip/Kconfig       |    4 +
 drivers/net/dsa/microchip/Makefile      |    3 +-
 drivers/net/dsa/microchip/ksz9477.c     | 1316 +++++++++++++++++++++++++++++++
 drivers/net/dsa/microchip/ksz9477_spi.c |  143 ++--
 drivers/net/dsa/microchip/ksz_common.c  | 1170 ++++-----------------------
 drivers/net/dsa/microchip/ksz_common.h  |  214 +++++
 drivers/net/dsa/microchip/ksz_priv.h    |  226 +++---
 drivers/net/dsa/microchip/ksz_spi.h     |   69 ++
 8 files changed, 1903 insertions(+), 1242 deletions(-)
 create mode 100644 drivers/net/dsa/microchip/ksz9477.c
 create mode 100644 drivers/net/dsa/microchip/ksz_common.h
 create mode 100644 drivers/net/dsa/microchip/ksz_spi.h

Comments

Sørensen, Stefan Dec. 3, 2018, 1:49 p.m. UTC | #1
On Tue, 2018-11-20 at 15:55 -0800, Tristram.Ha@microchip.com wrote:
> From: Tristram Ha <Tristram.Ha@microchip.com>
> 
> Break KSZ9477 DSA driver into two files in preparation to add more
> KSZ switch drivers.
> Add common functions in ksz_common.h so that other KSZ switch drivers
> can access code in ksz_common.c.
> Add ksz_spi.h for common functions used by KSZ switch SPI drivers.

With this patch, the ethernet on my EVB-KSZ9477 is now completely non-
functional, link is detected on the LAN ports, but no packets are
forwarded to/from the CPU port.

Looking through the patch, it does much more than splitting up the
existing code, e.g. the PORT_VLAN_MEMBERSHIP register is now written to
- I suspect that change may be responsible for the problem.


Stefan
Tristram.Ha@microchip.com Dec. 3, 2018, 8:44 p.m. UTC | #2
> From: Sørensen, Stefan <Stefan.Sorensen@spectralink.com>
> Sent: Monday, December 03, 2018 5:50 AM
> To: davem@davemloft.net; Tristram Ha - C24268
> <Tristram.Ha@microchip.com>
> Cc: netdev@vger.kernel.org; pavel@ucw.cz; f.fainelli@gmail.com;
> UNGLinuxDriver <UNGLinuxDriver@microchip.com>; andrew@lunn.ch
> Subject: Re: [PATCH v4 net-next 5/6] net: dsa: microchip: break KSZ9477 DSA
> driver into two files
> 
> On Tue, 2018-11-20 at 15:55 -0800, Tristram.Ha@microchip.com wrote:
> > From: Tristram Ha <Tristram.Ha@microchip.com>
> >
> > Break KSZ9477 DSA driver into two files in preparation to add more
> > KSZ switch drivers.
> > Add common functions in ksz_common.h so that other KSZ switch drivers
> > can access code in ksz_common.c.
> > Add ksz_spi.h for common functions used by KSZ switch SPI drivers.
> 
> With this patch, the ethernet on my EVB-KSZ9477 is now completely non-
> functional, link is detected on the LAN ports, but no packets are
> forwarded to/from the CPU port.
> 
> Looking through the patch, it does much more than splitting up the
> existing code, e.g. the PORT_VLAN_MEMBERSHIP register is now written to
> - I suspect that change may be responsible for the problem.
> 

It is more likely the RGMII interface is not set properly.  There are upcoming
patches that address this issue.  The primary way to set RGMII delay is to set
phy-mode to "rgmii-txid" inside the device tree under the ksz9477 definition.
The chip can be set to MII/RMII with strap options, but there is no way to
change RGMII delay settings.

The patch will try to get the mode from hardware first.  When it is not set in
device tree this mode will be used.  When it is different from the one set a
warning will be displayed.  The one from device tree will be the one to use.

This will patch will support KSZ9893, a 3-port variant of KSZ9477.  It shares
most of the registers but has a different tail tag format, and uses a different
RGMII setting in the evaluation board.

Or do you use a different CPU port rather than the default port 6?
diff mbox series

Patch

diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index 4e25fe4..a8caf92 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -1,7 +1,11 @@ 
+config NET_DSA_MICROCHIP_KSZ_COMMON
+	tristate
+
 menuconfig NET_DSA_MICROCHIP_KSZ9477
 	tristate "Microchip KSZ9477 series switch support"
 	depends on NET_DSA
 	select NET_DSA_TAG_KSZ
+	select NET_DSA_MICROCHIP_KSZ_COMMON
 	help
 	  This driver adds support for Microchip KSZ9477 switch chips.
 
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 9393e73..3142c18 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,2 +1,3 @@ 
-obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477)		+= ksz_common.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON)	+= ksz_common.o
+obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477)		+= ksz9477.o
 obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI)	+= ksz9477_spi.o
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
new file mode 100644
index 0000000..80df6c0
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -0,0 +1,1316 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip KSZ9477 switch driver main logic
+ *
+ * Copyright (C) 2017-2018 Microchip Technology Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/microchip-ksz.h>
+#include <linux/phy.h>
+#include <linux/etherdevice.h>
+#include <linux/if_bridge.h>
+#include <net/dsa.h>
+#include <net/switchdev.h>
+
+#include "ksz_priv.h"
+#include "ksz_common.h"
+#include "ksz_9477_reg.h"
+
+static const struct {
+	int index;
+	char string[ETH_GSTRING_LEN];
+} ksz9477_mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
+	{ 0x00, "rx_hi" },
+	{ 0x01, "rx_undersize" },
+	{ 0x02, "rx_fragments" },
+	{ 0x03, "rx_oversize" },
+	{ 0x04, "rx_jabbers" },
+	{ 0x05, "rx_symbol_err" },
+	{ 0x06, "rx_crc_err" },
+	{ 0x07, "rx_align_err" },
+	{ 0x08, "rx_mac_ctrl" },
+	{ 0x09, "rx_pause" },
+	{ 0x0A, "rx_bcast" },
+	{ 0x0B, "rx_mcast" },
+	{ 0x0C, "rx_ucast" },
+	{ 0x0D, "rx_64_or_less" },
+	{ 0x0E, "rx_65_127" },
+	{ 0x0F, "rx_128_255" },
+	{ 0x10, "rx_256_511" },
+	{ 0x11, "rx_512_1023" },
+	{ 0x12, "rx_1024_1522" },
+	{ 0x13, "rx_1523_2000" },
+	{ 0x14, "rx_2001" },
+	{ 0x15, "tx_hi" },
+	{ 0x16, "tx_late_col" },
+	{ 0x17, "tx_pause" },
+	{ 0x18, "tx_bcast" },
+	{ 0x19, "tx_mcast" },
+	{ 0x1A, "tx_ucast" },
+	{ 0x1B, "tx_deferred" },
+	{ 0x1C, "tx_total_col" },
+	{ 0x1D, "tx_exc_col" },
+	{ 0x1E, "tx_single_col" },
+	{ 0x1F, "tx_mult_col" },
+	{ 0x80, "rx_total" },
+	{ 0x81, "tx_total" },
+	{ 0x82, "rx_discards" },
+	{ 0x83, "tx_discards" },
+};
+
+static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
+{
+	u32 data;
+
+	ksz_read32(dev, addr, &data);
+	if (set)
+		data |= bits;
+	else
+		data &= ~bits;
+	ksz_write32(dev, addr, data);
+}
+
+static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
+			       u32 bits, bool set)
+{
+	u32 addr;
+	u32 data;
+
+	addr = PORT_CTRL_ADDR(port, offset);
+	ksz_read32(dev, addr, &data);
+
+	if (set)
+		data |= bits;
+	else
+		data &= ~bits;
+
+	ksz_write32(dev, addr, data);
+}
+
+static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton,
+					int timeout)
+{
+	u8 data;
+
+	do {
+		ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
+		if (!(data & waiton))
+			break;
+		usleep_range(1, 10);
+	} while (timeout-- > 0);
+
+	if (timeout <= 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid,
+				  u32 *vlan_table)
+{
+	int ret;
+
+	mutex_lock(&dev->vlan_mutex);
+
+	ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+	ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
+
+	/* wait to be cleared */
+	ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+	if (ret < 0) {
+		dev_dbg(dev->dev, "Failed to read vlan table\n");
+		goto exit;
+	}
+
+	ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
+	ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
+	ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
+
+	ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+exit:
+	mutex_unlock(&dev->vlan_mutex);
+
+	return ret;
+}
+
+static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid,
+				  u32 *vlan_table)
+{
+	int ret;
+
+	mutex_lock(&dev->vlan_mutex);
+
+	ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
+	ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
+	ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
+
+	ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
+	ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
+
+	/* wait to be cleared */
+	ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
+	if (ret < 0) {
+		dev_dbg(dev->dev, "Failed to write vlan table\n");
+		goto exit;
+	}
+
+	ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
+
+	/* update vlan cache table */
+	dev->vlan_cache[vid].table[0] = vlan_table[0];
+	dev->vlan_cache[vid].table[1] = vlan_table[1];
+	dev->vlan_cache[vid].table[2] = vlan_table[2];
+
+exit:
+	mutex_unlock(&dev->vlan_mutex);
+
+	return ret;
+}
+
+static void ksz9477_read_table(struct ksz_device *dev, u32 *table)
+{
+	ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
+	ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
+	ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
+	ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
+}
+
+static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
+{
+	ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
+	ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
+	ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
+	ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
+}
+
+static int ksz9477_wait_alu_ready(struct ksz_device *dev, u32 waiton,
+				  int timeout)
+{
+	u32 data;
+
+	do {
+		ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
+		if (!(data & waiton))
+			break;
+		usleep_range(1, 10);
+	} while (timeout-- > 0);
+
+	if (timeout <= 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev, u32 waiton,
+				      int timeout)
+{
+	u32 data;
+
+	do {
+		ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
+		if (!(data & waiton))
+			break;
+		usleep_range(1, 10);
+	} while (timeout-- > 0);
+
+	if (timeout <= 0)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int ksz9477_reset_switch(struct ksz_device *dev)
+{
+	u8 data8;
+	u16 data16;
+	u32 data32;
+
+	/* reset switch */
+	ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
+
+	/* turn off SPI DO Edge select */
+	ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+	data8 &= ~SPI_AUTO_EDGE_DETECTION;
+	ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+
+	/* default configuration */
+	ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
+	data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
+	      SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
+	ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+
+	/* disable interrupts */
+	ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
+	ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
+	ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
+
+	/* set broadcast storm protection 10% rate */
+	ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
+	data16 &= ~BROADCAST_STORM_RATE;
+	data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
+	ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
+
+	return 0;
+}
+
+static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
+						      int port)
+{
+	return DSA_TAG_PROTO_KSZ;
+}
+
+static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
+{
+	struct ksz_device *dev = ds->priv;
+	u16 val = 0xffff;
+
+	/* No real PHY after this. Simulate the PHY.
+	 * A fixed PHY can be setup in the device tree, but this function is
+	 * still called for that port during initialization.
+	 * For RGMII PHY there is no way to access it so the fixed PHY should
+	 * be used.  For SGMII PHY the supporting code will be added later.
+	 */
+	if (addr >= dev->phy_port_cnt) {
+		struct ksz_port *p = &dev->ports[addr];
+
+		switch (reg) {
+		case MII_BMCR:
+			val = 0x1140;
+			break;
+		case MII_BMSR:
+			val = 0x796d;
+			break;
+		case MII_PHYSID1:
+			val = 0x0022;
+			break;
+		case MII_PHYSID2:
+			val = 0x1631;
+			break;
+		case MII_ADVERTISE:
+			val = 0x05e1;
+			break;
+		case MII_LPA:
+			val = 0xc5e1;
+			break;
+		case MII_CTRL1000:
+			val = 0x0700;
+			break;
+		case MII_STAT1000:
+			if (p->phydev.speed == SPEED_1000)
+				val = 0x3800;
+			else
+				val = 0;
+			break;
+		}
+	} else {
+		ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+	}
+
+	return val;
+}
+
+static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
+			       u16 val)
+{
+	struct ksz_device *dev = ds->priv;
+
+	/* No real PHY after this. */
+	if (addr >= dev->phy_port_cnt)
+		return 0;
+	ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
+
+	return 0;
+}
+
+static void ksz9477_get_strings(struct dsa_switch *ds, int port,
+				u32 stringset, uint8_t *buf)
+{
+	int i;
+
+	if (stringset != ETH_SS_STATS)
+		return;
+
+	for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+		memcpy(buf + i * ETH_GSTRING_LEN, ksz9477_mib_names[i].string,
+		       ETH_GSTRING_LEN);
+	}
+}
+
+static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
+				  uint64_t *buf)
+{
+	struct ksz_device *dev = ds->priv;
+	int i;
+	u32 data;
+	int timeout;
+
+	mutex_lock(&dev->stats_mutex);
+
+	for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
+		data = MIB_COUNTER_READ;
+		data |= ((ksz9477_mib_names[i].index & 0xFF) <<
+			MIB_COUNTER_INDEX_S);
+		ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+
+		timeout = 1000;
+		do {
+			ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
+				    &data);
+			usleep_range(1, 10);
+			if (!(data & MIB_COUNTER_READ))
+				break;
+		} while (timeout-- > 0);
+
+		/* failed to read MIB. get out of loop */
+		if (!timeout) {
+			dev_dbg(dev->dev, "Failed to get MIB\n");
+			break;
+		}
+
+		/* count resets upon read */
+		ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
+
+		dev->mib_value[i] += (uint64_t)data;
+		buf[i] = dev->mib_value[i];
+	}
+
+	mutex_unlock(&dev->stats_mutex);
+}
+
+static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
+				    u8 member)
+{
+	ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
+	dev->ports[port].member = member;
+}
+
+static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
+				       u8 state)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p = &dev->ports[port];
+	u8 data;
+	int member = -1;
+
+	ksz_pread8(dev, port, P_STP_CTRL, &data);
+	data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+
+	switch (state) {
+	case BR_STATE_DISABLED:
+		data |= PORT_LEARN_DISABLE;
+		if (port != dev->cpu_port)
+			member = 0;
+		break;
+	case BR_STATE_LISTENING:
+		data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+		if (port != dev->cpu_port &&
+		    p->stp_state == BR_STATE_DISABLED)
+			member = dev->host_mask | p->vid_member;
+		break;
+	case BR_STATE_LEARNING:
+		data |= PORT_RX_ENABLE;
+		break;
+	case BR_STATE_FORWARDING:
+		data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
+
+		/* This function is also used internally. */
+		if (port == dev->cpu_port)
+			break;
+
+		member = dev->host_mask | p->vid_member;
+
+		/* Port is a member of a bridge. */
+		if (dev->br_member & (1 << port)) {
+			dev->member |= (1 << port);
+			member = dev->member;
+		}
+		break;
+	case BR_STATE_BLOCKING:
+		data |= PORT_LEARN_DISABLE;
+		if (port != dev->cpu_port &&
+		    p->stp_state == BR_STATE_DISABLED)
+			member = dev->host_mask | p->vid_member;
+		break;
+	default:
+		dev_err(ds->dev, "invalid STP state: %d\n", state);
+		return;
+	}
+
+	ksz_pwrite8(dev, port, P_STP_CTRL, data);
+	p->stp_state = state;
+	if (data & PORT_RX_ENABLE)
+		dev->rx_ports |= (1 << port);
+	else
+		dev->rx_ports &= ~(1 << port);
+	if (data & PORT_TX_ENABLE)
+		dev->tx_ports |= (1 << port);
+	else
+		dev->tx_ports &= ~(1 << port);
+
+	/* Port membership may share register with STP state. */
+	if (member >= 0 && member != p->member)
+		ksz9477_cfg_port_member(dev, port, (u8)member);
+
+	/* Check if forwarding needs to be updated. */
+	if (state != BR_STATE_FORWARDING) {
+		if (dev->br_member & (1 << port))
+			dev->member &= ~(1 << port);
+	}
+
+	/* When topology has changed the function ksz_update_port_member
+	 * should be called to modify port forwarding behavior.  However
+	 * as the offload_fwd_mark indication cannot be reported here
+	 * the switch forwarding function is not enabled.
+	 */
+}
+
+static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
+{
+	u8 data;
+
+	ksz_read8(dev, REG_SW_LUE_CTRL_2, &data);
+	data &= ~(SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S);
+	data |= (SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
+	ksz_write8(dev, REG_SW_LUE_CTRL_2, data);
+	if (port < dev->mib_port_cnt) {
+		/* flush individual port */
+		ksz_pread8(dev, port, P_STP_CTRL, &data);
+		if (!(data & PORT_LEARN_DISABLE))
+			ksz_pwrite8(dev, port, P_STP_CTRL,
+				    data | PORT_LEARN_DISABLE);
+		ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
+		ksz_pwrite8(dev, port, P_STP_CTRL, data);
+	} else {
+		/* flush all */
+		ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
+	}
+}
+
+static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
+				       bool flag)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (flag) {
+		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+			     PORT_VLAN_LOOKUP_VID_0, true);
+		ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
+			      true);
+		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
+	} else {
+		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
+		ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
+			      false);
+		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
+			     PORT_VLAN_LOOKUP_VID_0, false);
+	}
+
+	return 0;
+}
+
+static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
+				  const struct switchdev_obj_port_vlan *vlan)
+{
+	struct ksz_device *dev = ds->priv;
+	u32 vlan_table[3];
+	u16 vid;
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+		if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
+			dev_dbg(dev->dev, "Failed to get vlan table\n");
+			return;
+		}
+
+		vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
+		if (untagged)
+			vlan_table[1] |= BIT(port);
+		else
+			vlan_table[1] &= ~BIT(port);
+		vlan_table[1] &= ~(BIT(dev->cpu_port));
+
+		vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
+
+		if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
+			dev_dbg(dev->dev, "Failed to set vlan table\n");
+			return;
+		}
+
+		/* change PVID */
+		if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
+			ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
+	}
+}
+
+static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
+				 const struct switchdev_obj_port_vlan *vlan)
+{
+	struct ksz_device *dev = ds->priv;
+	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+	u32 vlan_table[3];
+	u16 vid;
+	u16 pvid;
+
+	ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
+	pvid = pvid & 0xFFF;
+
+	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
+		if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
+			dev_dbg(dev->dev, "Failed to get vlan table\n");
+			return -ETIMEDOUT;
+		}
+
+		vlan_table[2] &= ~BIT(port);
+
+		if (pvid == vid)
+			pvid = 1;
+
+		if (untagged)
+			vlan_table[1] &= ~BIT(port);
+
+		if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
+			dev_dbg(dev->dev, "Failed to set vlan table\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
+
+	return 0;
+}
+
+static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
+				const unsigned char *addr, u16 vid)
+{
+	struct ksz_device *dev = ds->priv;
+	u32 alu_table[4];
+	u32 data;
+	int ret = 0;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* find any entry with mac & vid */
+	data = vid << ALU_FID_INDEX_S;
+	data |= ((addr[0] << 8) | addr[1]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+	data = ((addr[2] << 24) | (addr[3] << 16));
+	data |= ((addr[4] << 8) | addr[5]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+	/* start read operation */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
+	if (ret < 0) {
+		dev_dbg(dev->dev, "Failed to read ALU\n");
+		goto exit;
+	}
+
+	/* read ALU entry */
+	ksz9477_read_table(dev, alu_table);
+
+	/* update ALU entry */
+	alu_table[0] = ALU_V_STATIC_VALID;
+	alu_table[1] |= BIT(port);
+	if (vid)
+		alu_table[1] |= ALU_V_USE_FID;
+	alu_table[2] = (vid << ALU_V_FID_S);
+	alu_table[2] |= ((addr[0] << 8) | addr[1]);
+	alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
+	alu_table[3] |= ((addr[4] << 8) | addr[5]);
+
+	ksz9477_write_table(dev, alu_table);
+
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
+	if (ret < 0)
+		dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
+				const unsigned char *addr, u16 vid)
+{
+	struct ksz_device *dev = ds->priv;
+	u32 alu_table[4];
+	u32 data;
+	int ret = 0;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* read any entry with mac & vid */
+	data = vid << ALU_FID_INDEX_S;
+	data |= ((addr[0] << 8) | addr[1]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
+
+	data = ((addr[2] << 24) | (addr[3] << 16));
+	data |= ((addr[4] << 8) | addr[5]);
+	ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
+
+	/* start read operation */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
+	if (ret < 0) {
+		dev_dbg(dev->dev, "Failed to read ALU\n");
+		goto exit;
+	}
+
+	ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
+	if (alu_table[0] & ALU_V_STATIC_VALID) {
+		ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
+		ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
+		ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
+
+		/* clear forwarding port */
+		alu_table[2] &= ~BIT(port);
+
+		/* if there is no port to forward, clear table */
+		if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
+			alu_table[0] = 0;
+			alu_table[1] = 0;
+			alu_table[2] = 0;
+			alu_table[3] = 0;
+		}
+	} else {
+		alu_table[0] = 0;
+		alu_table[1] = 0;
+		alu_table[2] = 0;
+		alu_table[3] = 0;
+	}
+
+	ksz9477_write_table(dev, alu_table);
+
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
+	if (ret < 0)
+		dev_dbg(dev->dev, "Failed to write ALU\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table)
+{
+	alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
+	alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
+	alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
+	alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
+			ALU_V_PRIO_AGE_CNT_M;
+	alu->mstp = alu_table[0] & ALU_V_MSTP_M;
+
+	alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
+	alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
+	alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
+
+	alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
+
+	alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
+	alu->mac[1] = alu_table[2] & 0xFF;
+	alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
+	alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
+	alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
+	alu->mac[5] = alu_table[3] & 0xFF;
+}
+
+static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
+				 dsa_fdb_dump_cb_t *cb, void *data)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret = 0;
+	u32 ksz_data;
+	u32 alu_table[4];
+	struct alu_struct alu;
+	int timeout;
+
+	mutex_lock(&dev->alu_mutex);
+
+	/* start ALU search */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
+
+	do {
+		timeout = 1000;
+		do {
+			ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
+			if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
+				break;
+			usleep_range(1, 10);
+		} while (timeout-- > 0);
+
+		if (!timeout) {
+			dev_dbg(dev->dev, "Failed to search ALU\n");
+			ret = -ETIMEDOUT;
+			goto exit;
+		}
+
+		/* read ALU table */
+		ksz9477_read_table(dev, alu_table);
+
+		ksz9477_convert_alu(&alu, alu_table);
+
+		if (alu.port_forward & BIT(port)) {
+			ret = cb(alu.mac, alu.fid, alu.is_static, data);
+			if (ret)
+				goto exit;
+		}
+	} while (ksz_data & ALU_START);
+
+exit:
+
+	/* stop ALU search */
+	ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
+
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
+				 const struct switchdev_obj_port_mdb *mdb)
+{
+	struct ksz_device *dev = ds->priv;
+	u32 static_table[4];
+	u32 data;
+	int index;
+	u32 mac_hi, mac_lo;
+
+	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (index = 0; index < dev->num_statics; index++) {
+		/* find empty slot first */
+		data = (index << ALU_STAT_INDEX_S) |
+			ALU_STAT_READ | ALU_STAT_START;
+		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+		/* wait to be finished */
+		if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
+			dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+			goto exit;
+		}
+
+		/* read ALU static table */
+		ksz9477_read_table(dev, static_table);
+
+		if (static_table[0] & ALU_V_STATIC_VALID) {
+			/* check this has same vid & mac address */
+			if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+			    static_table[3] == mac_lo) {
+				/* found matching one */
+				break;
+			}
+		} else {
+			/* found empty one */
+			break;
+		}
+	}
+
+	/* no available entry */
+	if (index == dev->num_statics)
+		goto exit;
+
+	/* add entry */
+	static_table[0] = ALU_V_STATIC_VALID;
+	static_table[1] |= BIT(port);
+	if (mdb->vid)
+		static_table[1] |= ALU_V_USE_FID;
+	static_table[2] = (mdb->vid << ALU_V_FID_S);
+	static_table[2] |= mac_hi;
+	static_table[3] = mac_lo;
+
+	ksz9477_write_table(dev, static_table);
+
+	data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+	/* wait to be finished */
+	if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
+		dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+}
+
+static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
+				const struct switchdev_obj_port_mdb *mdb)
+{
+	struct ksz_device *dev = ds->priv;
+	u32 static_table[4];
+	u32 data;
+	int index;
+	int ret = 0;
+	u32 mac_hi, mac_lo;
+
+	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
+	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
+	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
+
+	mutex_lock(&dev->alu_mutex);
+
+	for (index = 0; index < dev->num_statics; index++) {
+		/* find empty slot first */
+		data = (index << ALU_STAT_INDEX_S) |
+			ALU_STAT_READ | ALU_STAT_START;
+		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+		/* wait to be finished */
+		ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+		if (ret < 0) {
+			dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+			goto exit;
+		}
+
+		/* read ALU static table */
+		ksz9477_read_table(dev, static_table);
+
+		if (static_table[0] & ALU_V_STATIC_VALID) {
+			/* check this has same vid & mac address */
+
+			if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
+			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
+			    static_table[3] == mac_lo) {
+				/* found matching one */
+				break;
+			}
+		}
+	}
+
+	/* no available entry */
+	if (index == dev->num_statics)
+		goto exit;
+
+	/* clear port */
+	static_table[1] &= ~BIT(port);
+
+	if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
+		/* delete entry */
+		static_table[0] = 0;
+		static_table[1] = 0;
+		static_table[2] = 0;
+		static_table[3] = 0;
+	}
+
+	ksz9477_write_table(dev, static_table);
+
+	data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
+	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
+
+	/* wait to be finished */
+	ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
+	if (ret < 0)
+		dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+
+exit:
+	mutex_unlock(&dev->alu_mutex);
+
+	return ret;
+}
+
+static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
+				   struct dsa_mall_mirror_tc_entry *mirror,
+				   bool ingress)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (ingress)
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
+	else
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
+
+	ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
+
+	/* configure mirror port */
+	ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+		     PORT_MIRROR_SNIFFER, true);
+
+	ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+
+	return 0;
+}
+
+static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
+				    struct dsa_mall_mirror_tc_entry *mirror)
+{
+	struct ksz_device *dev = ds->priv;
+	u8 data;
+
+	if (mirror->ingress)
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
+	else
+		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
+
+	ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
+
+	if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
+		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
+			     PORT_MIRROR_SNIFFER, false);
+}
+
+static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
+{
+	u8 data8;
+	u8 member;
+	u16 data16;
+	struct ksz_port *p = &dev->ports[port];
+
+	/* enable tag tail for host port */
+	if (cpu_port)
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
+			     true);
+
+	ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
+
+	/* set back pressure */
+	ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
+
+	/* enable broadcast storm limit */
+	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
+
+	/* disable DiffServ priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
+
+	/* replace priority */
+	ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
+		     false);
+	ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
+			   MTI_PVID_REPLACE, false);
+
+	/* enable 802.1p priority */
+	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
+
+	if (port < dev->phy_port_cnt) {
+		/* do not force flow control */
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+			     false);
+
+	} else {
+		/* force flow control */
+		ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
+			     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
+			     true);
+
+		/* configure MAC to 1G & RGMII mode */
+		ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
+		data8 &= ~PORT_MII_NOT_1GBIT;
+		data8 &= ~PORT_MII_SEL_M;
+		switch (dev->interface) {
+		case PHY_INTERFACE_MODE_MII:
+			data8 |= PORT_MII_NOT_1GBIT;
+			data8 |= PORT_MII_SEL;
+			p->phydev.speed = SPEED_100;
+			break;
+		case PHY_INTERFACE_MODE_RMII:
+			data8 |= PORT_MII_NOT_1GBIT;
+			data8 |= PORT_RMII_SEL;
+			p->phydev.speed = SPEED_100;
+			break;
+		case PHY_INTERFACE_MODE_GMII:
+			data8 |= PORT_GMII_SEL;
+			p->phydev.speed = SPEED_1000;
+			break;
+		default:
+			data8 &= ~PORT_RGMII_ID_IG_ENABLE;
+			data8 &= ~PORT_RGMII_ID_EG_ENABLE;
+			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+				data8 |= PORT_RGMII_ID_IG_ENABLE;
+			if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
+			    dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+				data8 |= PORT_RGMII_ID_EG_ENABLE;
+			data8 |= PORT_RGMII_SEL;
+			p->phydev.speed = SPEED_1000;
+			break;
+		}
+		ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
+		p->phydev.duplex = 1;
+	}
+	if (cpu_port) {
+		member = dev->port_mask;
+		dev->on_ports = dev->host_mask;
+		dev->live_ports = dev->host_mask;
+	} else {
+		member = dev->host_mask | p->vid_member;
+		dev->on_ports |= (1 << port);
+
+		/* Link was detected before port is enabled. */
+		if (p->phydev.link)
+			dev->live_ports |= (1 << port);
+	}
+	ksz9477_cfg_port_member(dev, port, member);
+
+	/* clear pending interrupts */
+	if (port < dev->phy_port_cnt)
+		ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
+}
+
+static void ksz9477_config_cpu_port(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p;
+	int i;
+
+	ds->num_ports = dev->port_cnt;
+
+	for (i = 0; i < dev->port_cnt; i++) {
+		if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
+			dev->cpu_port = i;
+			dev->host_mask = (1 << dev->cpu_port);
+			dev->port_mask |= dev->host_mask;
+
+			/* enable cpu port */
+			ksz9477_port_setup(dev, i, true);
+			p = &dev->ports[dev->cpu_port];
+			p->vid_member = dev->port_mask;
+			p->on = 1;
+		}
+	}
+
+	dev->member = dev->host_mask;
+
+	for (i = 0; i < dev->mib_port_cnt; i++) {
+		if (i == dev->cpu_port)
+			continue;
+		p = &dev->ports[i];
+
+		/* Initialize to non-zero so that ksz_cfg_port_member() will
+		 * be called.
+		 */
+		p->vid_member = (1 << i);
+		p->member = dev->port_mask;
+		ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+		p->on = 1;
+		if (i < dev->phy_port_cnt)
+			p->phy = 1;
+		if (dev->chip_id == 0x00947700 && i == 6) {
+			p->sgmii = 1;
+
+			/* SGMII PHY detection code is not implemented yet. */
+			p->phy = 0;
+		}
+	}
+}
+
+static int ksz9477_setup(struct dsa_switch *ds)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret = 0;
+
+	dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
+				       dev->num_vlans, GFP_KERNEL);
+	if (!dev->vlan_cache)
+		return -ENOMEM;
+
+	ret = ksz9477_reset_switch(dev);
+	if (ret) {
+		dev_err(ds->dev, "failed to reset switch\n");
+		return ret;
+	}
+
+	/* accept packet up to 2000bytes */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
+
+	ksz9477_config_cpu_port(ds);
+
+	ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
+
+	/* queue based egress rate limit */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+
+	/* start switch */
+	ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
+
+	return 0;
+}
+
+static const struct dsa_switch_ops ksz9477_switch_ops = {
+	.get_tag_protocol	= ksz9477_get_tag_protocol,
+	.setup			= ksz9477_setup,
+	.phy_read		= ksz9477_phy_read16,
+	.phy_write		= ksz9477_phy_write16,
+	.port_enable		= ksz_enable_port,
+	.port_disable		= ksz_disable_port,
+	.get_strings		= ksz9477_get_strings,
+	.get_ethtool_stats	= ksz_get_ethtool_stats,
+	.get_sset_count		= ksz_sset_count,
+	.port_bridge_join	= ksz_port_bridge_join,
+	.port_bridge_leave	= ksz_port_bridge_leave,
+	.port_stp_state_set	= ksz9477_port_stp_state_set,
+	.port_fast_age		= ksz_port_fast_age,
+	.port_vlan_filtering	= ksz9477_port_vlan_filtering,
+	.port_vlan_prepare	= ksz_port_vlan_prepare,
+	.port_vlan_add		= ksz9477_port_vlan_add,
+	.port_vlan_del		= ksz9477_port_vlan_del,
+	.port_fdb_dump		= ksz9477_port_fdb_dump,
+	.port_fdb_add		= ksz9477_port_fdb_add,
+	.port_fdb_del		= ksz9477_port_fdb_del,
+	.port_mdb_prepare       = ksz_port_mdb_prepare,
+	.port_mdb_add           = ksz9477_port_mdb_add,
+	.port_mdb_del           = ksz9477_port_mdb_del,
+	.port_mirror_add	= ksz9477_port_mirror_add,
+	.port_mirror_del	= ksz9477_port_mirror_del,
+};
+
+static u32 ksz9477_get_port_addr(int port, int offset)
+{
+	return PORT_CTRL_ADDR(port, offset);
+}
+
+static int ksz9477_switch_detect(struct ksz_device *dev)
+{
+	u8 data8;
+	u32 id32;
+	int ret;
+
+	/* turn off SPI DO Edge select */
+	ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
+	if (ret)
+		return ret;
+
+	data8 &= ~SPI_AUTO_EDGE_DETECTION;
+	ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
+	if (ret)
+		return ret;
+
+	/* read chip id */
+	ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
+	if (ret)
+		return ret;
+
+	/* Number of ports can be reduced depending on chip. */
+	dev->mib_port_cnt = TOTAL_PORT_NUM;
+	dev->phy_port_cnt = 5;
+
+	dev->chip_id = id32;
+
+	return 0;
+}
+
+struct ksz_chip_data {
+	u32 chip_id;
+	const char *dev_name;
+	int num_vlans;
+	int num_alus;
+	int num_statics;
+	int cpu_ports;
+	int port_cnt;
+};
+
+static const struct ksz_chip_data ksz9477_switch_chips[] = {
+	{
+		.chip_id = 0x00947700,
+		.dev_name = "KSZ9477",
+		.num_vlans = 4096,
+		.num_alus = 4096,
+		.num_statics = 16,
+		.cpu_ports = 0x7F,	/* can be configured as cpu port */
+		.port_cnt = 7,		/* total physical port count */
+	},
+	{
+		.chip_id = 0x00989700,
+		.dev_name = "KSZ9897",
+		.num_vlans = 4096,
+		.num_alus = 4096,
+		.num_statics = 16,
+		.cpu_ports = 0x7F,	/* can be configured as cpu port */
+		.port_cnt = 7,		/* total physical port count */
+	},
+};
+
+static int ksz9477_switch_init(struct ksz_device *dev)
+{
+	int i;
+
+	dev->ds->ops = &ksz9477_switch_ops;
+
+	for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
+		const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
+
+		if (dev->chip_id == chip->chip_id) {
+			dev->name = chip->dev_name;
+			dev->num_vlans = chip->num_vlans;
+			dev->num_alus = chip->num_alus;
+			dev->num_statics = chip->num_statics;
+			dev->port_cnt = chip->port_cnt;
+			dev->cpu_ports = chip->cpu_ports;
+
+			break;
+		}
+	}
+
+	/* no switch found */
+	if (!dev->port_cnt)
+		return -ENODEV;
+
+	dev->port_mask = (1 << dev->port_cnt) - 1;
+
+	dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
+	dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
+
+	i = dev->mib_port_cnt;
+	dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
+				  GFP_KERNEL);
+	if (!dev->ports)
+		return -ENOMEM;
+	for (i = 0; i < dev->mib_port_cnt; i++) {
+		dev->ports[i].mib.counters =
+			devm_kzalloc(dev->dev,
+				     sizeof(u64) *
+				     (TOTAL_SWITCH_COUNTER_NUM + 1),
+				     GFP_KERNEL);
+		if (!dev->ports[i].mib.counters)
+			return -ENOMEM;
+	}
+	dev->interface = PHY_INTERFACE_MODE_RGMII_TXID;
+
+	return 0;
+}
+
+static void ksz9477_switch_exit(struct ksz_device *dev)
+{
+	ksz9477_reset_switch(dev);
+}
+
+static const struct ksz_dev_ops ksz9477_dev_ops = {
+	.get_port_addr = ksz9477_get_port_addr,
+	.cfg_port_member = ksz9477_cfg_port_member,
+	.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
+	.port_setup = ksz9477_port_setup,
+	.shutdown = ksz9477_reset_switch,
+	.detect = ksz9477_switch_detect,
+	.init = ksz9477_switch_init,
+	.exit = ksz9477_switch_exit,
+};
+
+int ksz9477_switch_register(struct ksz_device *dev)
+{
+	return ksz_switch_register(dev, &ksz9477_dev_ops);
+}
+EXPORT_SYMBOL(ksz9477_switch_register);
+
+MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz9477_spi.c b/drivers/net/dsa/microchip/ksz9477_spi.c
index dc70f48..d757ba1 100644
--- a/drivers/net/dsa/microchip/ksz9477_spi.c
+++ b/drivers/net/dsa/microchip/ksz9477_spi.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Microchip KSZ series register access through SPI
+ * Microchip KSZ9477 series register access through SPI
  *
  * Copyright (C) 2017-2018 Microchip Technology Inc.
  */
@@ -13,6 +13,7 @@ 
 #include <linux/spi/spi.h>
 
 #include "ksz_priv.h"
+#include "ksz_spi.h"
 
 /* SPI frame opcodes */
 #define KS_SPIOP_RD			3
@@ -22,8 +23,11 @@ 
 #define SPI_ADDR_MASK			(BIT(SPI_ADDR_SHIFT) - 1)
 #define SPI_TURNAROUND_SHIFT		5
 
-static int ksz_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
-			    unsigned int len)
+/* Enough to read all switch port registers. */
+#define SPI_TX_BUF_LEN			0x100
+
+static int ksz9477_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
+				unsigned int len)
 {
 	u32 txbuf;
 	int ret;
@@ -37,27 +41,36 @@  static int ksz_spi_read_reg(struct spi_device *spi, u32 reg, u8 *val,
 	return ret;
 }
 
-static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
-			unsigned int len)
+static int ksz9477_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
+				 unsigned int len)
 {
-	struct spi_device *spi = dev->priv;
+	u32 *txbuf = (u32 *)val;
 
-	return ksz_spi_read_reg(spi, reg, data, len);
+	*txbuf = reg & SPI_ADDR_MASK;
+	*txbuf |= (KS_SPIOP_WR << SPI_ADDR_SHIFT);
+	*txbuf <<= SPI_TURNAROUND_SHIFT;
+	*txbuf = cpu_to_be32(*txbuf);
+
+	return spi_write(spi, txbuf, 4 + len);
 }
 
-static int ksz_spi_read8(struct ksz_device *dev, u32 reg, u8 *val)
+static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
+			unsigned int len)
 {
-	return ksz_spi_read(dev, reg, val, 1);
+	struct spi_device *spi = dev->priv;
+
+	return ksz9477_spi_read_reg(spi, reg, data, len);
 }
 
-static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
+static int ksz_spi_write(struct ksz_device *dev, u32 reg, void *data,
+			 unsigned int len)
 {
-	int ret = ksz_spi_read(dev, reg, (u8 *)val, 2);
-
-	if (!ret)
-		*val = be16_to_cpu(*val);
+	struct spi_device *spi = dev->priv;
 
-	return ret;
+	if (len > SPI_TX_BUF_LEN)
+		len = SPI_TX_BUF_LEN;
+	memcpy(&dev->txbuf[4], data, len);
+	return ksz9477_spi_write_reg(spi, reg, dev->txbuf, len);
 }
 
 static int ksz_spi_read24(struct ksz_device *dev, u32 reg, u32 *val)
@@ -75,72 +88,15 @@  static int ksz_spi_read24(struct ksz_device *dev, u32 reg, u32 *val)
 	return ret;
 }
 
-static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
-{
-	int ret = ksz_spi_read(dev, reg, (u8 *)val, 4);
-
-	if (!ret)
-		*val = be32_to_cpu(*val);
-
-	return ret;
-}
-
-static int ksz_spi_write_reg(struct spi_device *spi, u32 reg, u8 *val,
-			     unsigned int len)
-{
-	u32 txbuf;
-	u8 data[12];
-	int i;
-
-	txbuf = reg & SPI_ADDR_MASK;
-	txbuf |= (KS_SPIOP_WR << SPI_ADDR_SHIFT);
-	txbuf <<= SPI_TURNAROUND_SHIFT;
-	txbuf = cpu_to_be32(txbuf);
-
-	data[0] = txbuf & 0xFF;
-	data[1] = (txbuf & 0xFF00) >> 8;
-	data[2] = (txbuf & 0xFF0000) >> 16;
-	data[3] = (txbuf & 0xFF000000) >> 24;
-	for (i = 0; i < len; i++)
-		data[i + 4] = val[i];
-
-	return spi_write(spi, &data, 4 + len);
-}
-
-static int ksz_spi_write8(struct ksz_device *dev, u32 reg, u8 value)
-{
-	struct spi_device *spi = dev->priv;
-
-	return ksz_spi_write_reg(spi, reg, &value, 1);
-}
-
-static int ksz_spi_write16(struct ksz_device *dev, u32 reg, u16 value)
-{
-	struct spi_device *spi = dev->priv;
-
-	value = cpu_to_be16(value);
-	return ksz_spi_write_reg(spi, reg, (u8 *)&value, 2);
-}
-
 static int ksz_spi_write24(struct ksz_device *dev, u32 reg, u32 value)
 {
-	struct spi_device *spi = dev->priv;
-
 	/* make it to big endian 24bit from MSB */
 	value <<= 8;
 	value = cpu_to_be32(value);
-	return ksz_spi_write_reg(spi, reg, (u8 *)&value, 3);
+	return ksz_spi_write(dev, reg, &value, 3);
 }
 
-static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
-{
-	struct spi_device *spi = dev->priv;
-
-	value = cpu_to_be32(value);
-	return ksz_spi_write_reg(spi, reg, (u8 *)&value, 4);
-}
-
-static const struct ksz_io_ops ksz_spi_ops = {
+static const struct ksz_io_ops ksz9477_spi_ops = {
 	.read8 = ksz_spi_read8,
 	.read16 = ksz_spi_read16,
 	.read24 = ksz_spi_read24,
@@ -149,21 +105,27 @@  static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
 	.write16 = ksz_spi_write16,
 	.write24 = ksz_spi_write24,
 	.write32 = ksz_spi_write32,
+	.get = ksz_spi_get,
+	.set = ksz_spi_set,
 };
 
-static int ksz_spi_probe(struct spi_device *spi)
+static int ksz9477_spi_probe(struct spi_device *spi)
 {
 	struct ksz_device *dev;
 	int ret;
 
-	dev = ksz_switch_alloc(&spi->dev, &ksz_spi_ops, spi);
+	dev = ksz_switch_alloc(&spi->dev, &ksz9477_spi_ops, spi);
 	if (!dev)
 		return -ENOMEM;
 
 	if (spi->dev.platform_data)
 		dev->pdata = spi->dev.platform_data;
 
-	ret = ksz_switch_register(dev);
+	dev->txbuf = devm_kzalloc(dev->dev, 4 + SPI_TX_BUF_LEN, GFP_KERNEL);
+
+	ret = ksz9477_switch_register(dev);
+
+	/* Main DSA driver may not be started yet. */
 	if (ret)
 		return ret;
 
@@ -172,7 +134,7 @@  static int ksz_spi_probe(struct spi_device *spi)
 	return 0;
 }
 
-static int ksz_spi_remove(struct spi_device *spi)
+static int ksz9477_spi_remove(struct spi_device *spi)
 {
 	struct ksz_device *dev = spi_get_drvdata(spi);
 
@@ -182,25 +144,34 @@  static int ksz_spi_remove(struct spi_device *spi)
 	return 0;
 }
 
-static const struct of_device_id ksz_dt_ids[] = {
+static void ksz9477_spi_shutdown(struct spi_device *spi)
+{
+	struct ksz_device *dev = spi_get_drvdata(spi);
+
+	if (dev && dev->dev_ops->shutdown)
+		dev->dev_ops->shutdown(dev);
+}
+
+static const struct of_device_id ksz9477_dt_ids[] = {
 	{ .compatible = "microchip,ksz9477" },
 	{ .compatible = "microchip,ksz9897" },
 	{},
 };
-MODULE_DEVICE_TABLE(of, ksz_dt_ids);
+MODULE_DEVICE_TABLE(of, ksz9477_dt_ids);
 
-static struct spi_driver ksz_spi_driver = {
+static struct spi_driver ksz9477_spi_driver = {
 	.driver = {
 		.name	= "ksz9477-switch",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(ksz_dt_ids),
+		.of_match_table = of_match_ptr(ksz9477_dt_ids),
 	},
-	.probe	= ksz_spi_probe,
-	.remove	= ksz_spi_remove,
+	.probe	= ksz9477_spi_probe,
+	.remove	= ksz9477_spi_remove,
+	.shutdown = ksz9477_spi_shutdown,
 };
 
-module_spi_driver(ksz_spi_driver);
+module_spi_driver(ksz9477_spi_driver);
 
 MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
-MODULE_DESCRIPTION("Microchip KSZ Series Switch SPI access Driver");
+MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch SPI access Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 50b24dc..9705808 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -14,1123 +14,251 @@ 
 #include <linux/phy.h>
 #include <linux/etherdevice.h>
 #include <linux/if_bridge.h>
+#include <linux/of_net.h>
 #include <net/dsa.h>
 #include <net/switchdev.h>
 
 #include "ksz_priv.h"
 
-static const struct {
-	int index;
-	char string[ETH_GSTRING_LEN];
-} mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
-	{ 0x00, "rx_hi" },
-	{ 0x01, "rx_undersize" },
-	{ 0x02, "rx_fragments" },
-	{ 0x03, "rx_oversize" },
-	{ 0x04, "rx_jabbers" },
-	{ 0x05, "rx_symbol_err" },
-	{ 0x06, "rx_crc_err" },
-	{ 0x07, "rx_align_err" },
-	{ 0x08, "rx_mac_ctrl" },
-	{ 0x09, "rx_pause" },
-	{ 0x0A, "rx_bcast" },
-	{ 0x0B, "rx_mcast" },
-	{ 0x0C, "rx_ucast" },
-	{ 0x0D, "rx_64_or_less" },
-	{ 0x0E, "rx_65_127" },
-	{ 0x0F, "rx_128_255" },
-	{ 0x10, "rx_256_511" },
-	{ 0x11, "rx_512_1023" },
-	{ 0x12, "rx_1024_1522" },
-	{ 0x13, "rx_1523_2000" },
-	{ 0x14, "rx_2001" },
-	{ 0x15, "tx_hi" },
-	{ 0x16, "tx_late_col" },
-	{ 0x17, "tx_pause" },
-	{ 0x18, "tx_bcast" },
-	{ 0x19, "tx_mcast" },
-	{ 0x1A, "tx_ucast" },
-	{ 0x1B, "tx_deferred" },
-	{ 0x1C, "tx_total_col" },
-	{ 0x1D, "tx_exc_col" },
-	{ 0x1E, "tx_single_col" },
-	{ 0x1F, "tx_mult_col" },
-	{ 0x80, "rx_total" },
-	{ 0x81, "tx_total" },
-	{ 0x82, "rx_discards" },
-	{ 0x83, "tx_discards" },
-};
-
-static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
-{
-	u8 data;
-
-	ksz_read8(dev, addr, &data);
-	if (set)
-		data |= bits;
-	else
-		data &= ~bits;
-	ksz_write8(dev, addr, data);
-}
-
-static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
-{
-	u32 data;
-
-	ksz_read32(dev, addr, &data);
-	if (set)
-		data |= bits;
-	else
-		data &= ~bits;
-	ksz_write32(dev, addr, data);
-}
-
-static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
-			 bool set)
-{
-	u32 addr;
-	u8 data;
-
-	addr = PORT_CTRL_ADDR(port, offset);
-	ksz_read8(dev, addr, &data);
-
-	if (set)
-		data |= bits;
-	else
-		data &= ~bits;
-
-	ksz_write8(dev, addr, data);
-}
-
-static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset,
-			   u32 bits, bool set)
-{
-	u32 addr;
-	u32 data;
-
-	addr = PORT_CTRL_ADDR(port, offset);
-	ksz_read32(dev, addr, &data);
-
-	if (set)
-		data |= bits;
-	else
-		data &= ~bits;
-
-	ksz_write32(dev, addr, data);
-}
-
-static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int timeout)
-{
-	u8 data;
-
-	do {
-		ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
-		if (!(data & waiton))
-			break;
-		usleep_range(1, 10);
-	} while (timeout-- > 0);
-
-	if (timeout <= 0)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
-{
-	struct ksz_device *dev = ds->priv;
-	int ret;
-
-	mutex_lock(&dev->vlan_mutex);
-
-	ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
-	ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
-
-	/* wait to be cleared */
-	ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
-	if (ret < 0) {
-		dev_dbg(dev->dev, "Failed to read vlan table\n");
-		goto exit;
-	}
-
-	ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
-	ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
-	ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
-
-	ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
-
-exit:
-	mutex_unlock(&dev->vlan_mutex);
-
-	return ret;
-}
-
-static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table)
-{
-	struct ksz_device *dev = ds->priv;
-	int ret;
-
-	mutex_lock(&dev->vlan_mutex);
-
-	ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
-	ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
-	ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
-
-	ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
-	ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
-
-	/* wait to be cleared */
-	ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
-	if (ret < 0) {
-		dev_dbg(dev->dev, "Failed to write vlan table\n");
-		goto exit;
-	}
-
-	ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
-
-	/* update vlan cache table */
-	dev->vlan_cache[vid].table[0] = vlan_table[0];
-	dev->vlan_cache[vid].table[1] = vlan_table[1];
-	dev->vlan_cache[vid].table[2] = vlan_table[2];
-
-exit:
-	mutex_unlock(&dev->vlan_mutex);
-
-	return ret;
-}
-
-static void read_table(struct dsa_switch *ds, u32 *table)
-{
-	struct ksz_device *dev = ds->priv;
-
-	ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
-	ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
-	ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
-	ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
-}
-
-static void write_table(struct dsa_switch *ds, u32 *table)
-{
-	struct ksz_device *dev = ds->priv;
-
-	ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
-	ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
-	ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
-	ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
-}
-
-static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int timeout)
-{
-	u32 data;
-
-	do {
-		ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
-		if (!(data & waiton))
-			break;
-		usleep_range(1, 10);
-	} while (timeout-- > 0);
-
-	if (timeout <= 0)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int timeout)
-{
-	u32 data;
-
-	do {
-		ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
-		if (!(data & waiton))
-			break;
-		usleep_range(1, 10);
-	} while (timeout-- > 0);
-
-	if (timeout <= 0)
-		return -ETIMEDOUT;
-
-	return 0;
-}
-
-static int ksz9477_reset_switch(struct ksz_device *dev)
-{
-	u8 data8;
-	u16 data16;
-	u32 data32;
-
-	/* reset switch */
-	ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
-
-	/* turn off SPI DO Edge select */
-	ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
-	data8 &= ~SPI_AUTO_EDGE_DETECTION;
-	ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
-
-	/* default configuration */
-	ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
-	data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
-	      SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
-	ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
-
-	/* disable interrupts */
-	ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
-	ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
-	ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
-
-	/* set broadcast storm protection 10% rate */
-	ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
-	data16 &= ~BROADCAST_STORM_RATE;
-	data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
-	ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
-
-	return 0;
-}
-
-static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
-{
-	u8 data8;
-	u16 data16;
-
-	/* enable tag tail for host port */
-	if (cpu_port)
-		ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
-			     true);
-
-	ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
-
-	/* set back pressure */
-	ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
-
-	/* set flow control */
-	ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
-		     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true);
-
-	/* enable broadcast storm limit */
-	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
-
-	/* disable DiffServ priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
-
-	/* replace priority */
-	ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
-		     false);
-	ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
-		       MTI_PVID_REPLACE, false);
-
-	/* enable 802.1p priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
-
-	/* configure MAC to 1G & RGMII mode */
-	ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
-	data8 |= PORT_RGMII_ID_EG_ENABLE;
-	data8 &= ~PORT_MII_NOT_1GBIT;
-	data8 &= ~PORT_MII_SEL_M;
-	data8 |= PORT_RGMII_SEL;
-	ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
-
-	/* clear pending interrupts */
-	ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
-}
-
-static void ksz9477_config_cpu_port(struct dsa_switch *ds)
+void ksz_update_port_member(struct ksz_device *dev, int port)
 {
-	struct ksz_device *dev = ds->priv;
+	struct ksz_port *p;
 	int i;
 
-	ds->num_ports = dev->port_cnt;
-
-	for (i = 0; i < ds->num_ports; i++) {
-		if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
-			dev->cpu_port = i;
-
-			/* enable cpu port */
-			ksz9477_port_setup(dev, i, true);
-		}
+	for (i = 0; i < dev->port_cnt; i++) {
+		if (i == port || i == dev->cpu_port)
+			continue;
+		p = &dev->ports[i];
+		if (!(dev->member & (1 << i)))
+			continue;
+
+		/* Port is a member of the bridge and is forwarding. */
+		if (p->stp_state == BR_STATE_FORWARDING &&
+		    p->member != dev->member)
+			dev->dev_ops->cfg_port_member(dev, i, dev->member);
 	}
 }
+EXPORT_SYMBOL_GPL(ksz_update_port_member);
 
-static int ksz9477_setup(struct dsa_switch *ds)
+int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
 {
 	struct ksz_device *dev = ds->priv;
-	int ret = 0;
-
-	dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
-				       dev->num_vlans, GFP_KERNEL);
-	if (!dev->vlan_cache)
-		return -ENOMEM;
-
-	ret = ksz9477_reset_switch(dev);
-	if (ret) {
-		dev_err(ds->dev, "failed to reset switch\n");
-		return ret;
-	}
-
-	/* accept packet up to 2000bytes */
-	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
-
-	ksz9477_config_cpu_port(ds);
-
-	ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
-
-	/* queue based egress rate limit */
-	ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
+	u16 val = 0xffff;
 
-	/* start switch */
-	ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
-
-	return 0;
-}
-
-static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
-						      int port)
-{
-	return DSA_TAG_PROTO_KSZ;
-}
-
-static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
-{
-	struct ksz_device *dev = ds->priv;
-	u16 val = 0;
-
-	ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
+	dev->dev_ops->r_phy(dev, addr, reg, &val);
 
 	return val;
 }
+EXPORT_SYMBOL_GPL(ksz_phy_read16);
 
-static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
-			       u16 val)
-{
-	struct ksz_device *dev = ds->priv;
-
-	ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
-
-	return 0;
-}
-
-static int ksz_enable_port(struct dsa_switch *ds, int port,
-			   struct phy_device *phy)
+int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
 {
 	struct ksz_device *dev = ds->priv;
 
-	/* setup slave port */
-	ksz9477_port_setup(dev, port, false);
+	dev->dev_ops->w_phy(dev, addr, reg, val);
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_phy_write16);
 
-static void ksz_disable_port(struct dsa_switch *ds, int port,
-			     struct phy_device *phy)
+int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
 {
 	struct ksz_device *dev = ds->priv;
 
-	/* there is no port disable */
-	ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true);
-}
-
-static int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
-{
 	if (sset != ETH_SS_STATS)
 		return 0;
 
-	return TOTAL_SWITCH_COUNTER_NUM;
+	return dev->mib_cnt;
 }
+EXPORT_SYMBOL_GPL(ksz_sset_count);
 
-static void ksz9477_get_strings(struct dsa_switch *ds, int port,
-				u32 stringset, uint8_t *buf)
-{
-	int i;
-
-	if (stringset != ETH_SS_STATS)
-		return;
-
-	for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
-		memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string,
-		       ETH_GSTRING_LEN);
-	}
-}
-
-static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
-				  uint64_t *buf)
+int ksz_port_bridge_join(struct dsa_switch *ds, int port,
+			 struct net_device *br)
 {
 	struct ksz_device *dev = ds->priv;
-	int i;
-	u32 data;
-	int timeout;
 
-	mutex_lock(&dev->stats_mutex);
+	dev->br_member |= (1 << port);
 
-	for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
-		data = MIB_COUNTER_READ;
-		data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S);
-		ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
+	/* port_stp_state_set() will be called after to put the port in
+	 * appropriate state so there is no need to do anything.
+	 */
 
-		timeout = 1000;
-		do {
-			ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
-				    &data);
-			usleep_range(1, 10);
-			if (!(data & MIB_COUNTER_READ))
-				break;
-		} while (timeout-- > 0);
-
-		/* failed to read MIB. get out of loop */
-		if (!timeout) {
-			dev_dbg(dev->dev, "Failed to get MIB\n");
-			break;
-		}
-
-		/* count resets upon read */
-		ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
-
-		dev->mib_value[i] += (uint64_t)data;
-		buf[i] = dev->mib_value[i];
-	}
-
-	mutex_unlock(&dev->stats_mutex);
+	return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_port_bridge_join);
 
-static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
-				       u8 state)
+void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
+			   struct net_device *br)
 {
 	struct ksz_device *dev = ds->priv;
-	u8 data;
 
-	ksz_pread8(dev, port, P_STP_CTRL, &data);
-	data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
+	dev->br_member &= ~(1 << port);
+	dev->member &= ~(1 << port);
 
-	switch (state) {
-	case BR_STATE_DISABLED:
-		data |= PORT_LEARN_DISABLE;
-		break;
-	case BR_STATE_LISTENING:
-		data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
-		break;
-	case BR_STATE_LEARNING:
-		data |= PORT_RX_ENABLE;
-		break;
-	case BR_STATE_FORWARDING:
-		data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
-		break;
-	case BR_STATE_BLOCKING:
-		data |= PORT_LEARN_DISABLE;
-		break;
-	default:
-		dev_err(ds->dev, "invalid STP state: %d\n", state);
-		return;
-	}
-
-	ksz_pwrite8(dev, port, P_STP_CTRL, data);
+	/* port_stp_state_set() will be called after to put the port in
+	 * forwarding state so there is no need to do anything.
+	 */
 }
+EXPORT_SYMBOL_GPL(ksz_port_bridge_leave);
 
-static void ksz_port_fast_age(struct dsa_switch *ds, int port)
+void ksz_port_fast_age(struct dsa_switch *ds, int port)
 {
 	struct ksz_device *dev = ds->priv;
-	u8 data8;
 
-	ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
-	data8 |= SW_FAST_AGING;
-	ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
-
-	data8 &= ~SW_FAST_AGING;
-	ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
+	dev->dev_ops->flush_dyn_mac_table(dev, port);
 }
+EXPORT_SYMBOL_GPL(ksz_port_fast_age);
 
-static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
-				       bool flag)
-{
-	struct ksz_device *dev = ds->priv;
-
-	if (flag) {
-		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
-			     PORT_VLAN_LOOKUP_VID_0, true);
-		ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true);
-		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
-	} else {
-		ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
-		ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false);
-		ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
-			     PORT_VLAN_LOOKUP_VID_0, false);
-	}
-
-	return 0;
-}
-
-static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
-				 const struct switchdev_obj_port_vlan *vlan)
+int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+			  const struct switchdev_obj_port_vlan *vlan)
 {
 	/* nothing needed */
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_port_vlan_prepare);
 
-static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
-				  const struct switchdev_obj_port_vlan *vlan)
-{
-	struct ksz_device *dev = ds->priv;
-	u32 vlan_table[3];
-	u16 vid;
-	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
-
-	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
-		if (get_vlan_table(ds, vid, vlan_table)) {
-			dev_dbg(dev->dev, "Failed to get vlan table\n");
-			return;
-		}
-
-		vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
-		if (untagged)
-			vlan_table[1] |= BIT(port);
-		else
-			vlan_table[1] &= ~BIT(port);
-		vlan_table[1] &= ~(BIT(dev->cpu_port));
-
-		vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
-
-		if (set_vlan_table(ds, vid, vlan_table)) {
-			dev_dbg(dev->dev, "Failed to set vlan table\n");
-			return;
-		}
-
-		/* change PVID */
-		if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
-			ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
-	}
-}
-
-static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
-				 const struct switchdev_obj_port_vlan *vlan)
-{
-	struct ksz_device *dev = ds->priv;
-	bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
-	u32 vlan_table[3];
-	u16 vid;
-	u16 pvid;
-
-	ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
-	pvid = pvid & 0xFFF;
-
-	for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
-		if (get_vlan_table(ds, vid, vlan_table)) {
-			dev_dbg(dev->dev, "Failed to get vlan table\n");
-			return -ETIMEDOUT;
-		}
-
-		vlan_table[2] &= ~BIT(port);
-
-		if (pvid == vid)
-			pvid = 1;
-
-		if (untagged)
-			vlan_table[1] &= ~BIT(port);
-
-		if (set_vlan_table(ds, vid, vlan_table)) {
-			dev_dbg(dev->dev, "Failed to set vlan table\n");
-			return -ETIMEDOUT;
-		}
-	}
-
-	ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
-
-	return 0;
-}
-
-struct alu_struct {
-	/* entry 1 */
-	u8	is_static:1;
-	u8	is_src_filter:1;
-	u8	is_dst_filter:1;
-	u8	prio_age:3;
-	u32	_reserv_0_1:23;
-	u8	mstp:3;
-	/* entry 2 */
-	u8	is_override:1;
-	u8	is_use_fid:1;
-	u32	_reserv_1_1:23;
-	u8	port_forward:7;
-	/* entry 3 & 4*/
-	u32	_reserv_2_1:9;
-	u8	fid:7;
-	u8	mac[ETH_ALEN];
-};
-
-static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
-				const unsigned char *addr, u16 vid)
+int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb,
+		      void *data)
 {
 	struct ksz_device *dev = ds->priv;
-	u32 alu_table[4];
-	u32 data;
 	int ret = 0;
-
-	mutex_lock(&dev->alu_mutex);
-
-	/* find any entry with mac & vid */
-	data = vid << ALU_FID_INDEX_S;
-	data |= ((addr[0] << 8) | addr[1]);
-	ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
-
-	data = ((addr[2] << 24) | (addr[3] << 16));
-	data |= ((addr[4] << 8) | addr[5]);
-	ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
-
-	/* start read operation */
-	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
-
-	/* wait to be finished */
-	ret = wait_alu_ready(dev, ALU_START, 1000);
-	if (ret < 0) {
-		dev_dbg(dev->dev, "Failed to read ALU\n");
-		goto exit;
-	}
-
-	/* read ALU entry */
-	read_table(ds, alu_table);
-
-	/* update ALU entry */
-	alu_table[0] = ALU_V_STATIC_VALID;
-	alu_table[1] |= BIT(port);
-	if (vid)
-		alu_table[1] |= ALU_V_USE_FID;
-	alu_table[2] = (vid << ALU_V_FID_S);
-	alu_table[2] |= ((addr[0] << 8) | addr[1]);
-	alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
-	alu_table[3] |= ((addr[4] << 8) | addr[5]);
-
-	write_table(ds, alu_table);
-
-	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
-
-	/* wait to be finished */
-	ret = wait_alu_ready(dev, ALU_START, 1000);
-	if (ret < 0)
-		dev_dbg(dev->dev, "Failed to write ALU\n");
-
-exit:
-	mutex_unlock(&dev->alu_mutex);
-
-	return ret;
-}
-
-static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
-				const unsigned char *addr, u16 vid)
-{
-	struct ksz_device *dev = ds->priv;
-	u32 alu_table[4];
-	u32 data;
-	int ret = 0;
-
-	mutex_lock(&dev->alu_mutex);
-
-	/* read any entry with mac & vid */
-	data = vid << ALU_FID_INDEX_S;
-	data |= ((addr[0] << 8) | addr[1]);
-	ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
-
-	data = ((addr[2] << 24) | (addr[3] << 16));
-	data |= ((addr[4] << 8) | addr[5]);
-	ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
-
-	/* start read operation */
-	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
-
-	/* wait to be finished */
-	ret = wait_alu_ready(dev, ALU_START, 1000);
-	if (ret < 0) {
-		dev_dbg(dev->dev, "Failed to read ALU\n");
-		goto exit;
-	}
-
-	ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
-	if (alu_table[0] & ALU_V_STATIC_VALID) {
-		ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
-		ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
-		ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
-
-		/* clear forwarding port */
-		alu_table[2] &= ~BIT(port);
-
-		/* if there is no port to forward, clear table */
-		if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
-			alu_table[0] = 0;
-			alu_table[1] = 0;
-			alu_table[2] = 0;
-			alu_table[3] = 0;
-		}
-	} else {
-		alu_table[0] = 0;
-		alu_table[1] = 0;
-		alu_table[2] = 0;
-		alu_table[3] = 0;
-	}
-
-	write_table(ds, alu_table);
-
-	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
-
-	/* wait to be finished */
-	ret = wait_alu_ready(dev, ALU_START, 1000);
-	if (ret < 0)
-		dev_dbg(dev->dev, "Failed to write ALU\n");
-
-exit:
-	mutex_unlock(&dev->alu_mutex);
-
-	return ret;
-}
-
-static void convert_alu(struct alu_struct *alu, u32 *alu_table)
-{
-	alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
-	alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
-	alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
-	alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
-			ALU_V_PRIO_AGE_CNT_M;
-	alu->mstp = alu_table[0] & ALU_V_MSTP_M;
-
-	alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
-	alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
-	alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
-
-	alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
-
-	alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
-	alu->mac[1] = alu_table[2] & 0xFF;
-	alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
-	alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
-	alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
-	alu->mac[5] = alu_table[3] & 0xFF;
-}
-
-static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
-				 dsa_fdb_dump_cb_t *cb, void *data)
-{
-	struct ksz_device *dev = ds->priv;
-	int ret = 0;
-	u32 ksz_data;
-	u32 alu_table[4];
+	u16 i = 0;
+	u16 entries = 0;
+	u8 timestamp = 0;
+	u8 fid;
+	u8 member;
 	struct alu_struct alu;
-	int timeout;
-
-	mutex_lock(&dev->alu_mutex);
-
-	/* start ALU search */
-	ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
 
 	do {
-		timeout = 1000;
-		do {
-			ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
-			if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
-				break;
-			usleep_range(1, 10);
-		} while (timeout-- > 0);
-
-		if (!timeout) {
-			dev_dbg(dev->dev, "Failed to search ALU\n");
-			ret = -ETIMEDOUT;
-			goto exit;
-		}
-
-		/* read ALU table */
-		read_table(ds, alu_table);
-
-		convert_alu(&alu, alu_table);
-
-		if (alu.port_forward & BIT(port)) {
+		alu.is_static = false;
+		ret = dev->dev_ops->r_dyn_mac_table(dev, i, alu.mac, &fid,
+						    &member, &timestamp,
+						    &entries);
+		if (!ret && (member & BIT(port))) {
 			ret = cb(alu.mac, alu.fid, alu.is_static, data);
 			if (ret)
-				goto exit;
+				break;
 		}
-	} while (ksz_data & ALU_START);
-
-exit:
-
-	/* stop ALU search */
-	ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
-
-	mutex_unlock(&dev->alu_mutex);
+		i++;
+	} while (i < entries);
+	if (i >= entries)
+		ret = 0;
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ksz_port_fdb_dump);
 
-static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
-				const struct switchdev_obj_port_mdb *mdb)
+int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+			 const struct switchdev_obj_port_mdb *mdb)
 {
 	/* nothing to do */
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_port_mdb_prepare);
 
-static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
-				 const struct switchdev_obj_port_mdb *mdb)
+void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+		      const struct switchdev_obj_port_mdb *mdb)
 {
 	struct ksz_device *dev = ds->priv;
-	u32 static_table[4];
-	u32 data;
+	struct alu_struct alu;
 	int index;
-	u32 mac_hi, mac_lo;
-
-	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
-	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
-	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
-
-	mutex_lock(&dev->alu_mutex);
+	int empty = 0;
 
+	alu.port_forward = 0;
 	for (index = 0; index < dev->num_statics; index++) {
-		/* find empty slot first */
-		data = (index << ALU_STAT_INDEX_S) |
-			ALU_STAT_READ | ALU_STAT_START;
-		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
-		/* wait to be finished */
-		if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
-			dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
-			goto exit;
-		}
-
-		/* read ALU static table */
-		read_table(ds, static_table);
-
-		if (static_table[0] & ALU_V_STATIC_VALID) {
-			/* check this has same vid & mac address */
-			if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
-			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
-			    static_table[3] == mac_lo) {
-				/* found matching one */
+		if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) {
+			/* Found one already in static MAC table. */
+			if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) &&
+			    alu.fid == mdb->vid)
 				break;
-			}
-		} else {
-			/* found empty one */
-			break;
+		/* Remember the first empty entry. */
+		} else if (!empty) {
+			empty = index + 1;
 		}
 	}
 
 	/* no available entry */
-	if (index == dev->num_statics)
-		goto exit;
+	if (index == dev->num_statics && !empty)
+		return;
 
 	/* add entry */
-	static_table[0] = ALU_V_STATIC_VALID;
-	static_table[1] |= BIT(port);
-	if (mdb->vid)
-		static_table[1] |= ALU_V_USE_FID;
-	static_table[2] = (mdb->vid << ALU_V_FID_S);
-	static_table[2] |= mac_hi;
-	static_table[3] = mac_lo;
-
-	write_table(ds, static_table);
-
-	data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
-	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
-	/* wait to be finished */
-	if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
-		dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+	if (index == dev->num_statics) {
+		index = empty - 1;
+		memset(&alu, 0, sizeof(alu));
+		memcpy(alu.mac, mdb->addr, ETH_ALEN);
+		alu.is_static = true;
+	}
+	alu.port_forward |= BIT(port);
+	if (mdb->vid) {
+		alu.is_use_fid = true;
 
-exit:
-	mutex_unlock(&dev->alu_mutex);
+		/* Need a way to map VID to FID. */
+		alu.fid = mdb->vid;
+	}
+	dev->dev_ops->w_sta_mac_table(dev, index, &alu);
 }
+EXPORT_SYMBOL_GPL(ksz_port_mdb_add);
 
-static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
-				const struct switchdev_obj_port_mdb *mdb)
+int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+		     const struct switchdev_obj_port_mdb *mdb)
 {
 	struct ksz_device *dev = ds->priv;
-	u32 static_table[4];
-	u32 data;
+	struct alu_struct alu;
 	int index;
 	int ret = 0;
-	u32 mac_hi, mac_lo;
-
-	mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
-	mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
-	mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
-
-	mutex_lock(&dev->alu_mutex);
 
 	for (index = 0; index < dev->num_statics; index++) {
-		/* find empty slot first */
-		data = (index << ALU_STAT_INDEX_S) |
-			ALU_STAT_READ | ALU_STAT_START;
-		ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
-		/* wait to be finished */
-		ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
-		if (ret < 0) {
-			dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
-			goto exit;
-		}
-
-		/* read ALU static table */
-		read_table(ds, static_table);
-
-		if (static_table[0] & ALU_V_STATIC_VALID) {
-			/* check this has same vid & mac address */
-
-			if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
-			    ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
-			    static_table[3] == mac_lo) {
-				/* found matching one */
+		if (!dev->dev_ops->r_sta_mac_table(dev, index, &alu)) {
+			/* Found one already in static MAC table. */
+			if (!memcmp(alu.mac, mdb->addr, ETH_ALEN) &&
+			    alu.fid == mdb->vid)
 				break;
-			}
 		}
 	}
 
 	/* no available entry */
-	if (index == dev->num_statics) {
-		ret = -EINVAL;
+	if (index == dev->num_statics)
 		goto exit;
-	}
 
 	/* clear port */
-	static_table[1] &= ~BIT(port);
-
-	if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
-		/* delete entry */
-		static_table[0] = 0;
-		static_table[1] = 0;
-		static_table[2] = 0;
-		static_table[3] = 0;
-	}
-
-	write_table(ds, static_table);
-
-	data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
-	ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
-
-	/* wait to be finished */
-	ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
-	if (ret < 0)
-		dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
+	alu.port_forward &= ~BIT(port);
+	if (!alu.port_forward)
+		alu.is_static = false;
+	dev->dev_ops->w_sta_mac_table(dev, index, &alu);
 
 exit:
-	mutex_unlock(&dev->alu_mutex);
-
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ksz_port_mdb_del);
 
-static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
-				   struct dsa_mall_mirror_tc_entry *mirror,
-				   bool ingress)
+int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	struct ksz_device *dev = ds->priv;
 
-	if (ingress)
-		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
-	else
-		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
-
-	ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
-
-	/* configure mirror port */
-	ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
-		     PORT_MIRROR_SNIFFER, true);
+	/* setup slave port */
+	dev->dev_ops->port_setup(dev, port, false);
 
-	ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
+	/* port_stp_state_set() will be called after to enable the port so
+	 * there is no need to do anything.
+	 */
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ksz_enable_port);
 
-static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
-				    struct dsa_mall_mirror_tc_entry *mirror)
+void ksz_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy)
 {
 	struct ksz_device *dev = ds->priv;
-	u8 data;
-
-	if (mirror->ingress)
-		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
-	else
-		ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
-
-	ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
-
-	if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
-		ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
-			     PORT_MIRROR_SNIFFER, false);
-}
-
-static const struct dsa_switch_ops ksz_switch_ops = {
-	.get_tag_protocol	= ksz9477_get_tag_protocol,
-	.setup			= ksz9477_setup,
-	.phy_read		= ksz9477_phy_read16,
-	.phy_write		= ksz9477_phy_write16,
-	.port_enable		= ksz_enable_port,
-	.port_disable		= ksz_disable_port,
-	.get_strings		= ksz9477_get_strings,
-	.get_ethtool_stats	= ksz_get_ethtool_stats,
-	.get_sset_count		= ksz_sset_count,
-	.port_stp_state_set	= ksz9477_port_stp_state_set,
-	.port_fast_age		= ksz_port_fast_age,
-	.port_vlan_filtering	= ksz9477_port_vlan_filtering,
-	.port_vlan_prepare	= ksz_port_vlan_prepare,
-	.port_vlan_add		= ksz9477_port_vlan_add,
-	.port_vlan_del		= ksz9477_port_vlan_del,
-	.port_fdb_dump		= ksz9477_port_fdb_dump,
-	.port_fdb_add		= ksz9477_port_fdb_add,
-	.port_fdb_del		= ksz9477_port_fdb_del,
-	.port_mdb_prepare       = ksz_port_mdb_prepare,
-	.port_mdb_add           = ksz9477_port_mdb_add,
-	.port_mdb_del           = ksz9477_port_mdb_del,
-	.port_mirror_add	= ksz9477_port_mirror_add,
-	.port_mirror_del	= ksz9477_port_mirror_del,
-};
-
-struct ksz_chip_data {
-	u32 chip_id;
-	const char *dev_name;
-	int num_vlans;
-	int num_alus;
-	int num_statics;
-	int cpu_ports;
-	int port_cnt;
-};
-
-static const struct ksz_chip_data ksz9477_switch_chips[] = {
-	{
-		.chip_id = 0x00947700,
-		.dev_name = "KSZ9477",
-		.num_vlans = 4096,
-		.num_alus = 4096,
-		.num_statics = 16,
-		.cpu_ports = 0x7F,	/* can be configured as cpu port */
-		.port_cnt = 7,		/* total physical port count */
-	},
-	{
-		.chip_id = 0x00989700,
-		.dev_name = "KSZ9897",
-		.num_vlans = 4096,
-		.num_alus = 4096,
-		.num_statics = 16,
-		.cpu_ports = 0x7F,	/* can be configured as cpu port */
-		.port_cnt = 7,		/* total physical port count */
-	},
-};
-
-static int ksz9477_switch_init(struct ksz_device *dev)
-{
-	int i;
-
-	dev->ds->ops = &ksz_switch_ops;
-
-	for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
-		const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
 
-		if (dev->chip_id == chip->chip_id) {
-			dev->name = chip->dev_name;
-			dev->num_vlans = chip->num_vlans;
-			dev->num_alus = chip->num_alus;
-			dev->num_statics = chip->num_statics;
-			dev->port_cnt = chip->port_cnt;
-			dev->cpu_ports = chip->cpu_ports;
-
-			break;
-		}
-	}
+	dev->on_ports &= ~(1 << port);
+	dev->live_ports &= ~(1 << port);
 
-	/* no switch found */
-	if (!dev->port_cnt)
-		return -ENODEV;
-
-	return 0;
+	/* port_stp_state_set() will be called after to disable the port so
+	 * there is no need to do anything.
+	 */
 }
+EXPORT_SYMBOL_GPL(ksz_disable_port);
 
 struct ksz_device *ksz_switch_alloc(struct device *base,
 				    const struct ksz_io_ops *ops,
@@ -1158,34 +286,8 @@  struct ksz_device *ksz_switch_alloc(struct device *base,
 }
 EXPORT_SYMBOL(ksz_switch_alloc);
 
-int ksz_switch_detect(struct ksz_device *dev)
-{
-	u8 data8;
-	u32 id32;
-	int ret;
-
-	/* turn off SPI DO Edge select */
-	ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
-	if (ret)
-		return ret;
-
-	data8 &= ~SPI_AUTO_EDGE_DETECTION;
-	ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
-	if (ret)
-		return ret;
-
-	/* read chip id */
-	ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
-	if (ret)
-		return ret;
-
-	dev->chip_id = id32;
-
-	return 0;
-}
-EXPORT_SYMBOL(ksz_switch_detect);
-
-int ksz_switch_register(struct ksz_device *dev)
+int ksz_switch_register(struct ksz_device *dev,
+			const struct ksz_dev_ops *ops)
 {
 	int ret;
 
@@ -1197,19 +299,35 @@  int ksz_switch_register(struct ksz_device *dev)
 	mutex_init(&dev->alu_mutex);
 	mutex_init(&dev->vlan_mutex);
 
-	if (ksz_switch_detect(dev))
+	dev->dev_ops = ops;
+
+	if (dev->dev_ops->detect(dev))
 		return -EINVAL;
 
-	ret = ksz9477_switch_init(dev);
+	ret = dev->dev_ops->init(dev);
 	if (ret)
 		return ret;
 
-	return dsa_register_switch(dev->ds);
+	dev->interface = PHY_INTERFACE_MODE_MII;
+	if (dev->dev->of_node) {
+		ret = of_get_phy_mode(dev->dev->of_node);
+		if (ret >= 0)
+			dev->interface = ret;
+	}
+
+	ret = dsa_register_switch(dev->ds);
+	if (ret) {
+		dev->dev_ops->exit(dev);
+		return ret;
+	}
+
+	return 0;
 }
 EXPORT_SYMBOL(ksz_switch_register);
 
 void ksz_switch_remove(struct ksz_device *dev)
 {
+	dev->dev_ops->exit(dev);
 	dsa_unregister_switch(dev->ds);
 }
 EXPORT_SYMBOL(ksz_switch_remove);
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
new file mode 100644
index 0000000..2dd832d
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -0,0 +1,214 @@ 
+/* SPDX-License-Identifier: GPL-2.0
+ * Microchip switch driver common header
+ *
+ * Copyright (C) 2017-2018 Microchip Technology Inc.
+ */
+
+#ifndef __KSZ_COMMON_H
+#define __KSZ_COMMON_H
+
+void ksz_update_port_member(struct ksz_device *dev, int port);
+
+/* Common DSA access functions */
+
+int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg);
+int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val);
+int ksz_sset_count(struct dsa_switch *ds, int port, int sset);
+int ksz_port_bridge_join(struct dsa_switch *ds, int port,
+			 struct net_device *br);
+void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
+			   struct net_device *br);
+void ksz_port_fast_age(struct dsa_switch *ds, int port);
+int ksz_port_vlan_prepare(struct dsa_switch *ds, int port,
+			  const struct switchdev_obj_port_vlan *vlan);
+int ksz_port_fdb_dump(struct dsa_switch *ds, int port, dsa_fdb_dump_cb_t *cb,
+		      void *data);
+int ksz_port_mdb_prepare(struct dsa_switch *ds, int port,
+			 const struct switchdev_obj_port_mdb *mdb);
+void ksz_port_mdb_add(struct dsa_switch *ds, int port,
+		      const struct switchdev_obj_port_mdb *mdb);
+int ksz_port_mdb_del(struct dsa_switch *ds, int port,
+		     const struct switchdev_obj_port_mdb *mdb);
+int ksz_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+void ksz_disable_port(struct dsa_switch *ds, int port, struct phy_device *phy);
+
+/* Common register access functions */
+
+static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->read8(dev, reg, val);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->read16(dev, reg, val);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_read24(struct ksz_device *dev, u32 reg, u32 *val)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->read24(dev, reg, val);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->read32(dev, reg, val);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->write8(dev, reg, value);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->write16(dev, reg, value);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_write24(struct ksz_device *dev, u32 reg, u32 value)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->write24(dev, reg, value);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->write32(dev, reg, value);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_get(struct ksz_device *dev, u32 reg, void *data,
+			  size_t len)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->get(dev, reg, data, len);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline int ksz_set(struct ksz_device *dev, u32 reg, void *data,
+			  size_t len)
+{
+	int ret;
+
+	mutex_lock(&dev->reg_mutex);
+	ret = dev->ops->set(dev, reg, data, len);
+	mutex_unlock(&dev->reg_mutex);
+
+	return ret;
+}
+
+static inline void ksz_pread8(struct ksz_device *dev, int port, int offset,
+			      u8 *data)
+{
+	ksz_read8(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pread16(struct ksz_device *dev, int port, int offset,
+			       u16 *data)
+{
+	ksz_read16(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pread32(struct ksz_device *dev, int port, int offset,
+			       u32 *data)
+{
+	ksz_read32(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite8(struct ksz_device *dev, int port, int offset,
+			       u8 data)
+{
+	ksz_write8(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite16(struct ksz_device *dev, int port, int offset,
+				u16 data)
+{
+	ksz_write16(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
+				u32 data)
+{
+	ksz_write32(dev, dev->dev_ops->get_port_addr(port, offset), data);
+}
+
+static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set)
+{
+	u8 data;
+
+	ksz_read8(dev, addr, &data);
+	if (set)
+		data |= bits;
+	else
+		data &= ~bits;
+	ksz_write8(dev, addr, data);
+}
+
+static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits,
+			 bool set)
+{
+	u32 addr;
+	u8 data;
+
+	addr = dev->dev_ops->get_port_addr(port, offset);
+	ksz_read8(dev, addr, &data);
+
+	if (set)
+		data |= bits;
+	else
+		data &= ~bits;
+
+	ksz_write8(dev, addr, data);
+}
+
+#endif
diff --git a/drivers/net/dsa/microchip/ksz_priv.h b/drivers/net/dsa/microchip/ksz_priv.h
index 6a27933..74c5c1a 100644
--- a/drivers/net/dsa/microchip/ksz_priv.h
+++ b/drivers/net/dsa/microchip/ksz_priv.h
@@ -22,6 +22,27 @@  struct vlan_table {
 	u32 table[3];
 };
 
+struct ksz_port_mib {
+	u8 cnt_ptr;
+	u64 *counters;
+};
+
+struct ksz_port {
+	u16 member;
+	u16 vid_member;
+	int stp_state;
+	struct phy_device phydev;
+
+	u32 on:1;			/* port is not disabled by hardware */
+	u32 phy:1;			/* port has a PHY */
+	u32 fiber:1;			/* port is fiber */
+	u32 sgmii:1;			/* port is SGMII */
+	u32 force:1;
+	u32 link_just_down:1;		/* link just goes down */
+
+	struct ksz_port_mib mib;
+};
+
 struct ksz_device {
 	struct dsa_switch *ds;
 	struct ksz_platform_data *pdata;
@@ -32,6 +53,7 @@  struct ksz_device {
 	struct mutex alu_mutex;		/* ALU access */
 	struct mutex vlan_mutex;	/* vlan access */
 	const struct ksz_io_ops *ops;
+	const struct ksz_dev_ops *dev_ops;
 
 	struct device *dev;
 
@@ -44,11 +66,37 @@  struct ksz_device {
 	int num_statics;
 	int cpu_port;			/* port connected to CPU */
 	int cpu_ports;			/* port bitmap can be cpu port */
+	int phy_port_cnt;
 	int port_cnt;
+	int reg_mib_cnt;
+	int mib_cnt;
+	int mib_port_cnt;
+	int last_port;			/* ports after that not used */
+	phy_interface_t interface;
+	u32 regs_size;
 
 	struct vlan_table *vlan_cache;
 
 	u64 mib_value[TOTAL_SWITCH_COUNTER_NUM];
+
+	u8 *txbuf;
+
+	struct ksz_port *ports;
+	struct timer_list mib_read_timer;
+	struct work_struct mib_read;
+	unsigned long mib_read_interval;
+	u16 br_member;
+	u16 member;
+	u16 live_ports;
+	u16 on_ports;			/* ports enabled by DSA */
+	u16 rx_ports;
+	u16 tx_ports;
+	u16 mirror_rx;
+	u16 mirror_tx;
+	u32 features;			/* chip specific features */
+	u32 overrides;			/* chip functions set by user */
+	u16 host_mask;
+	u16 port_mask;
 };
 
 struct ksz_io_ops {
@@ -60,140 +108,60 @@  struct ksz_io_ops {
 	int (*write16)(struct ksz_device *dev, u32 reg, u16 value);
 	int (*write24)(struct ksz_device *dev, u32 reg, u32 value);
 	int (*write32)(struct ksz_device *dev, u32 reg, u32 value);
-	int (*phy_read16)(struct ksz_device *dev, int addr, int reg,
-			  u16 *value);
-	int (*phy_write16)(struct ksz_device *dev, int addr, int reg,
-			   u16 value);
+	int (*get)(struct ksz_device *dev, u32 reg, void *data, size_t len);
+	int (*set)(struct ksz_device *dev, u32 reg, void *data, size_t len);
+};
+
+struct alu_struct {
+	/* entry 1 */
+	u8	is_static:1;
+	u8	is_src_filter:1;
+	u8	is_dst_filter:1;
+	u8	prio_age:3;
+	u32	_reserv_0_1:23;
+	u8	mstp:3;
+	/* entry 2 */
+	u8	is_override:1;
+	u8	is_use_fid:1;
+	u32	_reserv_1_1:23;
+	u8	port_forward:7;
+	/* entry 3 & 4*/
+	u32	_reserv_2_1:9;
+	u8	fid:7;
+	u8	mac[ETH_ALEN];
+};
+
+struct ksz_dev_ops {
+	u32 (*get_port_addr)(int port, int offset);
+	void (*cfg_port_member)(struct ksz_device *dev, int port, u8 member);
+	void (*flush_dyn_mac_table)(struct ksz_device *dev, int port);
+	void (*port_setup)(struct ksz_device *dev, int port, bool cpu_port);
+	void (*r_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
+	void (*w_phy)(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
+	int (*r_dyn_mac_table)(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+			       u8 *fid, u8 *src_port, u8 *timestamp,
+			       u16 *entries);
+	int (*r_sta_mac_table)(struct ksz_device *dev, u16 addr,
+			       struct alu_struct *alu);
+	void (*w_sta_mac_table)(struct ksz_device *dev, u16 addr,
+				struct alu_struct *alu);
+	void (*r_mib_cnt)(struct ksz_device *dev, int port, u16 addr,
+			  u64 *cnt);
+	void (*r_mib_pkt)(struct ksz_device *dev, int port, u16 addr,
+			  u64 *dropped, u64 *cnt);
+	void (*port_init_cnt)(struct ksz_device *dev, int port);
+	int (*shutdown)(struct ksz_device *dev);
+	int (*detect)(struct ksz_device *dev);
+	int (*init)(struct ksz_device *dev);
+	void (*exit)(struct ksz_device *dev);
 };
 
 struct ksz_device *ksz_switch_alloc(struct device *base,
 				    const struct ksz_io_ops *ops, void *priv);
-int ksz_switch_detect(struct ksz_device *dev);
-int ksz_switch_register(struct ksz_device *dev);
+int ksz_switch_register(struct ksz_device *dev,
+			const struct ksz_dev_ops *ops);
 void ksz_switch_remove(struct ksz_device *dev);
 
-static inline int ksz_read8(struct ksz_device *dev, u32 reg, u8 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read8(dev, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int ksz_read16(struct ksz_device *dev, u32 reg, u16 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read16(dev, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int ksz_read24(struct ksz_device *dev, u32 reg, u32 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read24(dev, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int ksz_read32(struct ksz_device *dev, u32 reg, u32 *val)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->read32(dev, reg, val);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int ksz_write8(struct ksz_device *dev, u32 reg, u8 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write8(dev, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int ksz_write16(struct ksz_device *dev, u32 reg, u16 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write16(dev, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int ksz_write24(struct ksz_device *dev, u32 reg, u32 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write24(dev, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline int ksz_write32(struct ksz_device *dev, u32 reg, u32 value)
-{
-	int ret;
-
-	mutex_lock(&dev->reg_mutex);
-	ret = dev->ops->write32(dev, reg, value);
-	mutex_unlock(&dev->reg_mutex);
-
-	return ret;
-}
-
-static inline void ksz_pread8(struct ksz_device *dev, int port, int offset,
-			      u8 *data)
-{
-	ksz_read8(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pread16(struct ksz_device *dev, int port, int offset,
-			       u16 *data)
-{
-	ksz_read16(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pread32(struct ksz_device *dev, int port, int offset,
-			       u32 *data)
-{
-	ksz_read32(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite8(struct ksz_device *dev, int port, int offset,
-			       u8 data)
-{
-	ksz_write8(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite16(struct ksz_device *dev, int port, int offset,
-				u16 data)
-{
-	ksz_write16(dev, PORT_CTRL_ADDR(port, offset), data);
-}
-
-static inline void ksz_pwrite32(struct ksz_device *dev, int port, int offset,
-				u32 data)
-{
-	ksz_write32(dev, PORT_CTRL_ADDR(port, offset), data);
-}
+int ksz9477_switch_register(struct ksz_device *dev);
 
 #endif
diff --git a/drivers/net/dsa/microchip/ksz_spi.h b/drivers/net/dsa/microchip/ksz_spi.h
new file mode 100644
index 0000000..427811b
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_spi.h
@@ -0,0 +1,69 @@ 
+/* SPDX-License-Identifier: GPL-2.0
+ * Microchip KSZ series SPI access common header
+ *
+ * Copyright (C) 2017-2018 Microchip Technology Inc.
+ *	Tristram Ha <Tristram.Ha@microchip.com>
+ */
+
+#ifndef __KSZ_SPI_H
+#define __KSZ_SPI_H
+
+/* Chip dependent SPI access */
+static int ksz_spi_read(struct ksz_device *dev, u32 reg, u8 *data,
+			unsigned int len);
+static int ksz_spi_write(struct ksz_device *dev, u32 reg, void *data,
+			 unsigned int len);
+
+static int ksz_spi_read8(struct ksz_device *dev, u32 reg, u8 *val)
+{
+	return ksz_spi_read(dev, reg, val, 1);
+}
+
+static int ksz_spi_read16(struct ksz_device *dev, u32 reg, u16 *val)
+{
+	int ret = ksz_spi_read(dev, reg, (u8 *)val, 2);
+
+	if (!ret)
+		*val = be16_to_cpu(*val);
+
+	return ret;
+}
+
+static int ksz_spi_read32(struct ksz_device *dev, u32 reg, u32 *val)
+{
+	int ret = ksz_spi_read(dev, reg, (u8 *)val, 4);
+
+	if (!ret)
+		*val = be32_to_cpu(*val);
+
+	return ret;
+}
+
+static int ksz_spi_write8(struct ksz_device *dev, u32 reg, u8 value)
+{
+	return ksz_spi_write(dev, reg, &value, 1);
+}
+
+static int ksz_spi_write16(struct ksz_device *dev, u32 reg, u16 value)
+{
+	value = cpu_to_be16(value);
+	return ksz_spi_write(dev, reg, &value, 2);
+}
+
+static int ksz_spi_write32(struct ksz_device *dev, u32 reg, u32 value)
+{
+	value = cpu_to_be32(value);
+	return ksz_spi_write(dev, reg, &value, 4);
+}
+
+static int ksz_spi_get(struct ksz_device *dev, u32 reg, void *data, size_t len)
+{
+	return ksz_spi_read(dev, reg, data, len);
+}
+
+static int ksz_spi_set(struct ksz_device *dev, u32 reg, void *data, size_t len)
+{
+	return ksz_spi_write(dev, reg, data, len);
+}
+
+#endif