diff mbox series

[v1,net] net: dsa: microchip: initialize mutex before use

Message ID 1541040548-13465-1-git-send-email-Tristram.Ha@microchip.com
State Superseded, archived
Delegated to: David Miller
Headers show
Series [v1,net] net: dsa: microchip: initialize mutex before use | expand

Commit Message

Tristram.Ha@microchip.com Nov. 1, 2018, 2:49 a.m. UTC 
From: Tristram Ha <Tristram.Ha@microchip.com>

Initialize mutex before use.  Avoid kernel complaint when
CONFIG_DEBUG_LOCK_ALLOC is enabled.

Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
---
v1
- Remove comment

 drivers/net/dsa/microchip/ksz_common.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

Comments

Andrew Lunn Nov. 1, 2018, 12:17 p.m. UTC | #1 
On Wed, Oct 31, 2018 at 07:49:08PM -0700, Tristram.Ha@microchip.com wrote:
> From: Tristram Ha <Tristram.Ha@microchip.com>
> 
> Initialize mutex before use.  Avoid kernel complaint when
> CONFIG_DEBUG_LOCK_ALLOC is enabled.
> 
> Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477")
> Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Pavel Machek Nov. 1, 2018, 1:47 p.m. UTC | #2 
On Thu 2018-11-01 13:17:19, Andrew Lunn wrote:
> On Wed, Oct 31, 2018 at 07:49:08PM -0700, Tristram.Ha@microchip.com wrote:
> > From: Tristram Ha <Tristram.Ha@microchip.com>
> > 
> > Initialize mutex before use.  Avoid kernel complaint when
> > CONFIG_DEBUG_LOCK_ALLOC is enabled.
> > 
> > Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477")
> > Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>

Reviewed-by: Pavel Machek <pavel@ucw.cz>
									Pavel
diff mbox series

Patch

diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 54e0ca6..86b6464 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -1117,11 +1117,6 @@  static int ksz_switch_init(struct ksz_device *dev)
 {
 	int i;
 
-	mutex_init(&dev->reg_mutex);
-	mutex_init(&dev->stats_mutex);
-	mutex_init(&dev->alu_mutex);
-	mutex_init(&dev->vlan_mutex);
-
 	dev->ds->ops = &ksz_switch_ops;
 
 	for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
@@ -1206,6 +1201,11 @@  int ksz_switch_register(struct ksz_device *dev)
 	if (dev->pdata)
 		dev->chip_id = dev->pdata->chip_id;
 
+	mutex_init(&dev->reg_mutex);
+	mutex_init(&dev->stats_mutex);
+	mutex_init(&dev->alu_mutex);
+	mutex_init(&dev->vlan_mutex);
+
 	if (ksz_switch_detect(dev))
 		return -EINVAL;