diff mbox

[10/10] atl1c: remove PHY polling from atl1c_change_mtu

Message ID 1335578325-21326-11-git-send-email-xiong@qca.qualcomm.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Huang, Xiong April 28, 2012, 1:58 a.m. UTC 
PHY polling code for FPGA is considered in every MDIO R/W API.
no need to add additional code to atl1c_change_mtu.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: David Liu <dwliu@qca.qaulcomm.com>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |    8 --------
 1 files changed, 0 insertions(+), 8 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 1cdd898..86630a5 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -553,14 +553,6 @@  static int atl1c_change_mtu(struct net_device *netdev, int new_mtu)
 		netdev_update_features(netdev);
 		atl1c_up(adapter);
 		clear_bit(__AT_RESETTING, &adapter->flags);
-		if (adapter->hw.ctrl_flags & ATL1C_FPGA_VERSION) {
-			u32 phy_data;
-
-			AT_READ_REG(&adapter->hw, 0x1414, &phy_data);
-			phy_data |= 0x10000000;
-			AT_WRITE_REG(&adapter->hw, 0x1414, phy_data);
-		}
-
 	}
 	return 0;
 }