From patchwork Mon Apr 2 12:56:02 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: stigge@antcom.de X-Patchwork-Id: 150149 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 55AA0B6EE6 for ; Mon, 2 Apr 2012 22:59:51 +1000 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752096Ab2DBM7b (ORCPT ); Mon, 2 Apr 2012 08:59:31 -0400 Received: from mail.work-microwave.de ([62.245.205.51]:45451 "EHLO work-microwave.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751987Ab2DBM6F (ORCPT ); Mon, 2 Apr 2012 08:58:05 -0400 Received: from rst-pc1.lan.work-microwave.de ([192.168.11.78]) (authenticated bits=0) by mail.work-microwave.de with ESMTP id q32CuWFE007333 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Mon, 2 Apr 2012 13:56:33 +0100 Received: by rst-pc1.lan.work-microwave.de (Postfix, from userid 1000) id 7E1B3AE065; Mon, 2 Apr 2012 14:56:32 +0200 (CEST) From: Roland Stigge To: arm@kernel.org, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, w.sang@pengutronix.de, srinivas.bakki@nxp.com, kevin.wells@nxp.com, gregkh@linuxfoundation.org, netdev@vger.kernel.org, rtc-linux@googlegroups.com, a.zummo@towertech.it, linux-watchdog@vger.kernel.org, wim@iguana.be Cc: Roland Stigge Subject: [PATCH 5/7] i2c: Add device tree support to i2c-pnx.c Date: Mon, 2 Apr 2012 14:56:02 +0200 Message-Id: <1333371364-21347-6-git-send-email-stigge@antcom.de> X-Mailer: git-send-email 1.7.9 In-Reply-To: <1333371364-21347-1-git-send-email-stigge@antcom.de> References: <1333371364-21347-1-git-send-email-stigge@antcom.de> X-FEAS-SYSTEM-WL: rst@work-microwave.de, 192.168.11.78 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org This patch adds device tree support to the pnx-i2c driver by using platform resources for memory region and irq and removing dependency on mach includes. The following platforms are affected: * PNX * LPC31xx (WIP) * LPC32xx The patch is based on a patch by Jon Smirl, working on lpc31xx integration Signed-off-by: Roland Stigge --- Applies to v3.4-rc1 Updates: * Introducing slave-addr for I2C controller (this convention already exists in the kernel) * Bugfix: of_i2c_register_devices() was missing Documentation/devicetree/bindings/i2c/pnx.txt | 36 +++++ drivers/i2c/busses/i2c-pnx.c | 160 +++++++++++++++++++------- include/linux/i2c-pnx.h | 10 - 3 files changed, 158 insertions(+), 48 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html --- /dev/null +++ linux-2.6/Documentation/devicetree/bindings/i2c/pnx.txt @@ -0,0 +1,36 @@ +* NXP PNX I2C Controller + +Required properties: + + - reg: Offset and length of the register set for the device + - compatible: should be "nxp,pnx-i2c" + - interrupts: where a is the interrupt number and b is a + field that represents an encoding of the sense and level + information for the interrupt + - interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: + + - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz + - pnx,timeout: I2C bus timeout in milliseconds, Default: 10 ms + - slave-addr: Address used by the controller, Hardware default: 110 + +Examples: + + i2c1: i2c@400A0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400A0000 0x100>; + interrupt-parent = <&mic>; + interrupts = <51 0>; + }; + + i2c2: i2c@400A8000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400A8000 0x100>; + interrupt-parent = <&mic>; + interrupts = <50 0>; + clock-frequency = <0x186a0>; + pnx,timeout = <0x64>; + slave-addr = <0x11>; + }; --- linux-2.6.orig/drivers/i2c/busses/i2c-pnx.c +++ linux-2.6/drivers/i2c/busses/i2c-pnx.c @@ -23,16 +23,61 @@ #include #include #include +#include -#include -#include +#define I2C_PNX_TIMEOUT_DEFAULT 10 /* msec */ +#define I2C_PNX_SPEED_KHZ_DEFAULT 100 +#define I2C_PNX_REGION_SIZE 0x100 + +enum { + mstatus_tdi = 0x00000001, + mstatus_afi = 0x00000002, + mstatus_nai = 0x00000004, + mstatus_drmi = 0x00000008, + mstatus_active = 0x00000020, + mstatus_scl = 0x00000040, + mstatus_sda = 0x00000080, + mstatus_rff = 0x00000100, + mstatus_rfe = 0x00000200, + mstatus_tff = 0x00000400, + mstatus_tfe = 0x00000800, +}; + +enum { + mcntrl_tdie = 0x00000001, + mcntrl_afie = 0x00000002, + mcntrl_naie = 0x00000004, + mcntrl_drmie = 0x00000008, + mcntrl_daie = 0x00000020, + mcntrl_rffie = 0x00000040, + mcntrl_tffie = 0x00000080, + mcntrl_reset = 0x00000100, + mcntrl_cdbmode = 0x00000400, +}; -#define I2C_PNX_TIMEOUT 10 /* msec */ -#define I2C_PNX_SPEED_KHZ 100 -#define I2C_PNX_REGION_SIZE 0x100 +enum { + rw_bit = 1 << 0, + start_bit = 1 << 8, + stop_bit = 1 << 9, +}; + +#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ +#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ +#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ +#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ +#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ +#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ +#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ +#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ +#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ +#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ +#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ +#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ +#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ -static inline int wait_timeout(long timeout, struct i2c_pnx_algo_data *data) +static inline int wait_timeout(struct i2c_pnx_algo_data *data) { + long timeout = data->timeout; while (timeout > 0 && (ioread32(I2C_REG_STS(data)) & mstatus_active)) { mdelay(1); @@ -41,8 +86,9 @@ static inline int wait_timeout(long time return (timeout <= 0); } -static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data) +static inline int wait_reset(struct i2c_pnx_algo_data *data) { + long timeout = data->timeout; while (timeout > 0 && (ioread32(I2C_REG_CTL(data)) & mcntrl_reset)) { mdelay(1); @@ -54,7 +100,7 @@ static inline int wait_reset(long timeou static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data) { struct timer_list *timer = &alg_data->mif.timer; - unsigned long expires = msecs_to_jiffies(I2C_PNX_TIMEOUT); + unsigned long expires = msecs_to_jiffies(alg_data->timeout); if (expires <= 1) expires = 2; @@ -92,7 +138,7 @@ static int i2c_pnx_start(unsigned char s } /* First, make sure bus is idle */ - if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) { + if (wait_timeout(alg_data)) { /* Somebody else is monopolizing the bus */ dev_err(&alg_data->adapter.dev, "%s: Bus busy. Slave addr = %02x, cntrl = %x, stat = %x\n", @@ -185,7 +231,7 @@ static int i2c_pnx_master_xmit(struct i2 if (alg_data->mif.len == 0) { if (alg_data->last) { /* Wait until the STOP is seen. */ - if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) + if (wait_timeout(alg_data)) dev_err(&alg_data->adapter.dev, "The bus is still active after timeout\n"); } @@ -283,7 +329,7 @@ static int i2c_pnx_master_rcv(struct i2c if (alg_data->mif.len == 0) { if (alg_data->last) /* Wait until the STOP is seen. */ - if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) + if (wait_timeout(alg_data)) dev_err(&alg_data->adapter.dev, "The bus is still active after timeout\n"); @@ -399,7 +445,7 @@ static void i2c_pnx_timeout(unsigned lon ctl |= mcntrl_reset; iowrite32(ctl, I2C_REG_CTL(alg_data)); - wait_reset(I2C_PNX_TIMEOUT, alg_data); + wait_reset(alg_data); alg_data->mif.ret = -EIO; complete(&alg_data->mif.complete); } @@ -414,18 +460,18 @@ static inline void bus_reset_if_active(s alg_data->adapter.name); iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, I2C_REG_CTL(alg_data)); - wait_reset(I2C_PNX_TIMEOUT, alg_data); + wait_reset(alg_data); } else if (!(stat & mstatus_rfe) || !(stat & mstatus_tfe)) { /* If there is data in the fifo's after transfer, * flush fifo's by reset. */ iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, I2C_REG_CTL(alg_data)); - wait_reset(I2C_PNX_TIMEOUT, alg_data); + wait_reset(alg_data); } else if (stat & mstatus_nai) { iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset, I2C_REG_CTL(alg_data)); - wait_reset(I2C_PNX_TIMEOUT, alg_data); + wait_reset(alg_data); } } @@ -569,14 +615,9 @@ static int __devinit i2c_pnx_probe(struc int ret = 0; struct i2c_pnx_algo_data *alg_data; unsigned long freq; - struct i2c_pnx_data *i2c_pnx = pdev->dev.platform_data; - - if (!i2c_pnx || !i2c_pnx->name) { - dev_err(&pdev->dev, "%s: no platform data supplied\n", - __func__); - ret = -EINVAL; - goto out; - } + struct resource *res; + u32 speed = I2C_PNX_SPEED_KHZ_DEFAULT * 1000; + u32 slave_addr = ~0; alg_data = kzalloc(sizeof(*alg_data), GFP_KERNEL); if (!alg_data) { @@ -586,14 +627,22 @@ static int __devinit i2c_pnx_probe(struc platform_set_drvdata(pdev, alg_data); - strlcpy(alg_data->adapter.name, i2c_pnx->name, - sizeof(alg_data->adapter.name)); alg_data->adapter.dev.parent = &pdev->dev; alg_data->adapter.algo = &pnx_algorithm; alg_data->adapter.algo_data = alg_data; alg_data->adapter.nr = pdev->id; - alg_data->i2c_pnx = i2c_pnx; - + alg_data->timeout = I2C_PNX_TIMEOUT_DEFAULT; +#ifdef CONFIG_OF + alg_data->adapter.dev.of_node = of_node_get(pdev->dev.of_node); + if (pdev->dev.of_node) { + of_property_read_u32(pdev->dev.of_node, "pnx,timeout", + &alg_data->timeout); + of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &speed); + of_property_read_u32(pdev->dev.of_node, "slave-addr", + &slave_addr); + } +#endif alg_data->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(alg_data->clk)) { ret = PTR_ERR(alg_data->clk); @@ -604,17 +653,27 @@ static int __devinit i2c_pnx_probe(struc alg_data->mif.timer.function = i2c_pnx_timeout; alg_data->mif.timer.data = (unsigned long)alg_data; + snprintf(alg_data->adapter.name, sizeof(alg_data->adapter.name), + "%s", pdev->name); + /* Register I/O resource */ - if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE, + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Unable to get mem resource.\n"); + ret = -EBUSY; + goto out_clkget; + } + if (!request_mem_region(res->start, I2C_PNX_REGION_SIZE, pdev->name)) { dev_err(&pdev->dev, "I/O region 0x%08x for I2C already in use.\n", - i2c_pnx->base); - ret = -ENODEV; + res->start); + ret = -ENOMEM; goto out_clkget; } - alg_data->ioaddr = ioremap(i2c_pnx->base, I2C_PNX_REGION_SIZE); + alg_data->base = res->start; + alg_data->ioaddr = ioremap(res->start, I2C_PNX_REGION_SIZE); if (!alg_data->ioaddr) { dev_err(&pdev->dev, "Couldn't ioremap I2C I/O region\n"); ret = -ENOMEM; @@ -625,6 +684,9 @@ static int __devinit i2c_pnx_probe(struc if (ret) goto out_unmap; + if (slave_addr != ~0) + iowrite32(slave_addr, I2C_REG_ADR(alg_data)); + freq = clk_get_rate(alg_data->clk); /* @@ -638,20 +700,25 @@ static int __devinit i2c_pnx_probe(struc * the deglitching filter length. */ - tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2; + tmp = (freq / speed) / 2 - 2; if (tmp > 0x3FF) tmp = 0x3FF; iowrite32(tmp, I2C_REG_CKH(alg_data)); iowrite32(tmp, I2C_REG_CKL(alg_data)); iowrite32(mcntrl_reset, I2C_REG_CTL(alg_data)); - if (wait_reset(I2C_PNX_TIMEOUT, alg_data)) { + if (wait_reset(alg_data)) { ret = -ENODEV; goto out_clock; } init_completion(&alg_data->mif.complete); - ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt, + alg_data->irq = platform_get_irq(pdev, 0); + if (alg_data->irq < 0) { + dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n"); + goto out_irq; + } + ret = request_irq(alg_data->irq, i2c_pnx_interrupt, 0, pdev->name, alg_data); if (ret) goto out_clock; @@ -663,39 +730,39 @@ static int __devinit i2c_pnx_probe(struc goto out_irq; } + of_i2c_register_devices(&alg_data->adapter); + dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n", - alg_data->adapter.name, i2c_pnx->base, i2c_pnx->irq); + alg_data->adapter.name, res->start, alg_data->irq); return 0; out_irq: - free_irq(i2c_pnx->irq, alg_data); + free_irq(alg_data->irq, alg_data); out_clock: clk_disable(alg_data->clk); out_unmap: iounmap(alg_data->ioaddr); out_release: - release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE); + release_mem_region(res->start, I2C_PNX_REGION_SIZE); out_clkget: clk_put(alg_data->clk); out_drvdata: kfree(alg_data); err_kzalloc: platform_set_drvdata(pdev, NULL); -out: return ret; } static int __devexit i2c_pnx_remove(struct platform_device *pdev) { struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); - struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx; - free_irq(i2c_pnx->irq, alg_data); + free_irq(alg_data->irq, alg_data); i2c_del_adapter(&alg_data->adapter); clk_disable(alg_data->clk); iounmap(alg_data->ioaddr); - release_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE); + release_mem_region(alg_data->base, I2C_PNX_REGION_SIZE); clk_put(alg_data->clk); kfree(alg_data); platform_set_drvdata(pdev, NULL); @@ -703,10 +770,21 @@ static int __devexit i2c_pnx_remove(stru return 0; } +#ifdef CONFIG_OF +static const struct of_device_id i2c_pnx_of_match[] = { + { .compatible = "nxp,pnx-i2c" }, + { }, +}; +MODULE_DEVICE_TABLE(of, i2c_pnx_of_match); +#endif + static struct platform_driver i2c_pnx_driver = { .driver = { .name = "pnx-i2c", .owner = THIS_MODULE, +#ifdef CONFIG_OF + .of_match_table = i2c_pnx_of_match, +#endif }, .probe = i2c_pnx_probe, .remove = __devexit_p(i2c_pnx_remove), --- linux-2.6.orig/include/linux/i2c-pnx.h +++ linux-2.6/include/linux/i2c-pnx.h @@ -29,14 +29,10 @@ struct i2c_pnx_algo_data { struct i2c_pnx_mif mif; int last; struct clk *clk; - struct i2c_pnx_data *i2c_pnx; struct i2c_adapter adapter; -}; - -struct i2c_pnx_data { - const char *name; - u32 base; - int irq; + phys_addr_t base; + int irq; + u32 timeout; }; #endif /* __I2C_PNX_H__ */