From patchwork Thu Feb 18 21:24:12 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dimitris Michailidis X-Patchwork-Id: 45810 X-Patchwork-Delegate: davem@davemloft.net Return-Path: X-Original-To: patchwork-incoming@ozlabs.org Delivered-To: patchwork-incoming@ozlabs.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id EA2A6B7DD3 for ; Fri, 19 Feb 2010 08:25:08 +1100 (EST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754338Ab0BRVYo (ORCPT ); Thu, 18 Feb 2010 16:24:44 -0500 Received: from stargate.chelsio.com ([67.207.112.58]:15617 "EHLO stargate.chelsio.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751857Ab0BRVYa (ORCPT ); Thu, 18 Feb 2010 16:24:30 -0500 Received: from maui.asicdesigners.com (maui.asicdesigners.com [10.192.180.15]) by stargate.chelsio.com (8.13.1/8.13.1) with SMTP id o1ILOUft032165 for ; Thu, 18 Feb 2010 13:24:30 -0800 Received: from darkside.asicdesigners.com ([10.192.161.150]) by maui.asicdesigners.com with Microsoft SMTPSVC(6.0.3790.3959); Thu, 18 Feb 2010 13:26:59 -0800 Received: from darkside.asicdesigners.com (localhost.localdomain [127.0.0.1]) by darkside.asicdesigners.com (8.13.4/8.13.4) with ESMTP id o1ILOHxT020952 for ; Thu, 18 Feb 2010 13:24:17 -0800 Received: (from dm@localhost) by darkside.asicdesigners.com (8.13.4/8.13.4/Submit) id o1ILOHH9020951 for netdev@vger.kernel.org; Thu, 18 Feb 2010 13:24:17 -0800 From: Dimitris Michailidis To: netdev@vger.kernel.org Subject: [PATCH net-next 3/7] cxgb4: Add HW and FW support code Date: Thu, 18 Feb 2010 13:24:12 -0800 Message-Id: <1266528256-20873-4-git-send-email-dm@chelsio.com> X-Mailer: git-send-email 1.5.4 In-Reply-To: <1266528256-20873-3-git-send-email-dm@chelsio.com> References: <1266528256-20873-1-git-send-email-dm@chelsio.com> <1266528256-20873-2-git-send-email-dm@chelsio.com> <1266528256-20873-3-git-send-email-dm@chelsio.com> X-OriginalArrivalTime: 18 Feb 2010 21:26:59.0859 (UTC) FILETIME=[1AE16630:01CAB0E1] Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org Signed-off-by: Dimitris Michailidis --- drivers/net/cxgb4/t4_hw.c | 3128 +++++++++++++++++++++++++++++++++++++++++++++ drivers/net/cxgb4/t4_hw.h | 128 ++ 2 files changed, 3256 insertions(+), 0 deletions(-) create mode 100644 drivers/net/cxgb4/t4_hw.c create mode 100644 drivers/net/cxgb4/t4_hw.h diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/cxgb4/t4_hw.c new file mode 100644 index 0000000..f829af1 --- /dev/null +++ b/drivers/net/cxgb4/t4_hw.c @@ -0,0 +1,3128 @@ +/* + * This file is part of the Chelsio T4 Ethernet driver for Linux. + * + * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include "cxgb4.h" +#include "t4_regs.h" +#include "t4fw_api.h" + +/** + * t4_wait_op_done_val - wait until an operation is completed + * @adapter: the adapter performing the operation + * @reg: the register to check for completion + * @mask: a single-bit field within @reg that indicates completion + * @polarity: the value of the field when the operation is completed + * @attempts: number of check iterations + * @delay: delay in usecs between iterations + * @valp: where to store the value of the register at completion time + * + * Wait until an operation is completed by checking a bit in a register + * up to @attempts times. If @valp is not NULL the value of the register + * at the time it indicated completion is stored there. Returns 0 if the + * operation completes and -EAGAIN otherwise. + */ +int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask, + int polarity, int attempts, int delay, u32 *valp) +{ + while (1) { + u32 val = t4_read_reg(adapter, reg); + + if (!!(val & mask) == polarity) { + if (valp) + *valp = val; + return 0; + } + if (--attempts == 0) + return -EAGAIN; + if (delay) + udelay(delay); + } +} + +static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask, + int polarity, int attempts, int delay) +{ + return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts, + delay, NULL); +} + +/** + * t4_set_reg_field - set a register field to a value + * @adapter: the adapter to program + * @addr: the register address + * @mask: specifies the portion of the register to modify + * @val: the new value for the register field + * + * Sets a register field specified by the supplied mask to the + * given value. + */ +void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask, + u32 val) +{ + u32 v = t4_read_reg(adapter, addr) & ~mask; + + t4_write_reg(adapter, addr, v | val); + (void) t4_read_reg(adapter, addr); /* flush */ +} + +/** + * t4_read_indirect - read indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect address + * @data_reg: register holding the value of the indirect register + * @vals: where the read register values are stored + * @nregs: how many indirect registers to read + * @start_idx: index of first indirect register to read + * + * Reads registers that are accessed indirectly through an address/data + * register pair. + */ +void t4_read_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, u32 *vals, unsigned int nregs, + unsigned int start_idx) +{ + while (nregs--) { + t4_write_reg(adap, addr_reg, start_idx); + *vals++ = t4_read_reg(adap, data_reg); + start_idx++; + } +} + +/** + * t4_write_indirect - write indirectly addressed registers + * @adap: the adapter + * @addr_reg: register holding the indirect addresses + * @data_reg: register holding the value for the indirect registers + * @vals: values to write + * @nregs: how many indirect registers to write + * @start_idx: address of first indirect register to write + * + * Writes a sequential block of registers that are accessed indirectly + * through an address/data register pair. + */ +void t4_write_indirect(struct adapter *adap, unsigned int addr_reg, + unsigned int data_reg, const u32 *vals, + unsigned int nregs, unsigned int start_idx) +{ + while (nregs--) { + t4_write_reg(adap, addr_reg, start_idx++); + t4_write_reg(adap, data_reg, *vals++); + } +} + +/* + * Get the reply to a mailbox command and store it in @rpl in big-endian order. + */ +static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit, + u32 mbox_addr) +{ + for ( ; nflit; nflit--, mbox_addr += 8) + *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr)); +} + +/* + * Handle a FW assertion reported in a mailbox. + */ +static void fw_asrt(struct adapter *adap, u32 mbox_addr) +{ + struct fw_debug_cmd asrt; + + get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr); + dev_alert(adap->pdev_dev, + "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n", + asrt.u.assert.filename_0_7, ntohl(asrt.u.assert.line), + ntohl(asrt.u.assert.x), ntohl(asrt.u.assert.y)); +} + +static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg) +{ + dev_err(adap->pdev_dev, + "mbox %d: %llx %llx %llx %llx %llx %llx %llx %llx\n", mbox, + (unsigned long long)t4_read_reg64(adap, data_reg), + (unsigned long long)t4_read_reg64(adap, data_reg + 8), + (unsigned long long)t4_read_reg64(adap, data_reg + 16), + (unsigned long long)t4_read_reg64(adap, data_reg + 24), + (unsigned long long)t4_read_reg64(adap, data_reg + 32), + (unsigned long long)t4_read_reg64(adap, data_reg + 40), + (unsigned long long)t4_read_reg64(adap, data_reg + 48), + (unsigned long long)t4_read_reg64(adap, data_reg + 56)); +} + +/** + * t4_wr_mbox_meat - send a command to FW through the given mailbox + * @adap: the adapter + * @mbox: index of the mailbox to use + * @cmd: the command to write + * @size: command length in bytes + * @rpl: where to optionally store the reply + * @sleep_ok: if true we may sleep while awaiting command completion + * + * Sends the given command to FW through the selected mailbox and waits + * for the FW to execute the command. If @rpl is not %NULL it is used to + * store the FW's reply to the command. The command and its optional + * reply are of the same length. FW can take up to %FW_CMD_MAX_TIMEOUT ms + * to respond. @sleep_ok determines whether we may sleep while awaiting + * the response. If sleeping is allowed we use progressive backoff + * otherwise we spin. + * + * The return value is 0 on success or a negative errno on failure. A + * failure can happen either because we are not able to execute the + * command or FW executes it but signals an error. In the latter case + * the return value is the error code indicated by FW (negated). + */ +int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size, + void *rpl, bool sleep_ok) +{ + static int delay[] = { + 1, 1, 3, 5, 10, 10, 20, 50, 100, 200 + }; + + u32 v; + u64 res; + int i, ms, delay_idx; + const __be64 *p = cmd; + u32 data_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_DATA); + u32 ctl_reg = PF_REG(mbox, A_CIM_PF_MAILBOX_CTRL); + + if ((size & 15) || size > MBOX_LEN) + return -EINVAL; + + v = G_MBOWNER(t4_read_reg(adap, ctl_reg)); + for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++) + v = G_MBOWNER(t4_read_reg(adap, ctl_reg)); + + if (v != MBOX_OWNER_DRV) + return v ? -EBUSY : -ETIMEDOUT; + + for (i = 0; i < size; i += 8) + t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++)); + + t4_write_reg(adap, ctl_reg, F_MBMSGVALID | V_MBOWNER(MBOX_OWNER_FW)); + t4_read_reg(adap, ctl_reg); /* flush write */ + + delay_idx = 0; + ms = delay[0]; + + for (i = 0; i < FW_CMD_MAX_TIMEOUT; i += ms) { + if (sleep_ok) { + ms = delay[delay_idx]; /* last element may repeat */ + if (delay_idx < ARRAY_SIZE(delay) - 1) + delay_idx++; + msleep(ms); + } else + mdelay(ms); + + v = t4_read_reg(adap, ctl_reg); + if (G_MBOWNER(v) == MBOX_OWNER_DRV) { + if (!(v & F_MBMSGVALID)) { + t4_write_reg(adap, ctl_reg, 0); + continue; + } + + res = t4_read_reg64(adap, data_reg); + if (G_FW_CMD_OP(res >> 32) == FW_DEBUG_CMD) { + fw_asrt(adap, data_reg); + res = V_FW_CMD_RETVAL(EIO); + } else if (rpl) + get_mbox_rpl(adap, rpl, size / 8, data_reg); + + if (G_FW_CMD_RETVAL((int)res)) + dump_mbox(adap, mbox, data_reg); + t4_write_reg(adap, ctl_reg, 0); + return -G_FW_CMD_RETVAL((int)res); + } + } + + dump_mbox(adap, mbox, data_reg); + dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n", + *(const u8 *)cmd, mbox); + return -ETIMEDOUT; +} + +/** + * t4_mc_read - read from MC through backdoor accesses + * @adap: the adapter + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from MC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +int t4_mc_read(struct adapter *adap, u32 addr, __be32 *data, u64 *ecc) +{ + int i; + + if (t4_read_reg(adap, A_MC_BIST_CMD) & F_START_BIST) + return -EBUSY; + t4_write_reg(adap, A_MC_BIST_CMD_ADDR, addr & ~0x3fU); + t4_write_reg(adap, A_MC_BIST_CMD_LEN, 64); + t4_write_reg(adap, A_MC_BIST_DATA_PATTERN, 0xc); + t4_write_reg(adap, A_MC_BIST_CMD, V_BIST_OPCODE(1) | F_START_BIST | + V_BIST_CMD_GAP(1)); + i = t4_wait_op_done(adap, A_MC_BIST_CMD, F_START_BIST, 0, 10, 1); + if (i) + return i; + +#define MC_DATA(i) MC_BIST_STATUS_REG(A_MC_BIST_STATUS_RDATA, i) + + for (i = 15; i >= 0; i--) + *data++ = htonl(t4_read_reg(adap, MC_DATA(i))); + if (ecc) + *ecc = t4_read_reg64(adap, MC_DATA(16)); +#undef MC_DATA + return 0; +} + +/** + * t4_edc_read - read from EDC through backdoor accesses + * @adap: the adapter + * @idx: which EDC to access + * @addr: address of first byte requested + * @data: 64 bytes of data containing the requested address + * @ecc: where to store the corresponding 64-bit ECC word + * + * Read 64 bytes of data from EDC starting at a 64-byte-aligned address + * that covers the requested address @addr. If @parity is not %NULL it + * is assigned the 64-bit ECC word for the read data. + */ +int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc) +{ + int i; + + idx *= EDC_STRIDE; + if (t4_read_reg(adap, A_EDC_BIST_CMD + idx) & F_START_BIST) + return -EBUSY; + t4_write_reg(adap, A_EDC_BIST_CMD_ADDR + idx, addr & ~0x3fU); + t4_write_reg(adap, A_EDC_BIST_CMD_LEN + idx, 64); + t4_write_reg(adap, A_EDC_BIST_DATA_PATTERN + idx, 0xc); + t4_write_reg(adap, A_EDC_BIST_CMD + idx, + V_BIST_OPCODE(1) | V_BIST_CMD_GAP(1) | F_START_BIST); + i = t4_wait_op_done(adap, A_EDC_BIST_CMD + idx, F_START_BIST, 0, 10, 1); + if (i) + return i; + +#define EDC_DATA(i) (EDC_BIST_STATUS_REG(A_EDC_BIST_STATUS_RDATA, i) + idx) + + for (i = 15; i >= 0; i--) + *data++ = htonl(t4_read_reg(adap, EDC_DATA(i))); + if (ecc) + *ecc = t4_read_reg64(adap, EDC_DATA(16)); +#undef EDC_DATA + return 0; +} + +#define VPD_ENTRY(name, len) \ + u8 name##_kword[2]; u8 name##_len; u8 name##_data[len] + +/* + * Partial EEPROM Vital Product Data structure. Includes only the ID and + * VPD-R sections. + */ +struct t4_vpd { + u8 id_tag; + u8 id_len[2]; + u8 id_data[ID_LEN]; + u8 vpdr_tag; + u8 vpdr_len[2]; + VPD_ENTRY(pn, 16); /* part number */ + VPD_ENTRY(ec, EC_LEN); /* EC level */ + VPD_ENTRY(sn, SERNUM_LEN); /* serial number */ + VPD_ENTRY(na, 12); /* MAC address base */ + VPD_ENTRY(port_type, 8); /* port types */ + VPD_ENTRY(gpio, 14); /* GPIO usage */ + VPD_ENTRY(cclk, 6); /* core clock */ + VPD_ENTRY(port_addr, 8); /* port MDIO addresses */ + VPD_ENTRY(rv, 1); /* csum */ + u32 pad; /* for multiple-of-4 sizing and alignment */ +}; + +#define EEPROM_STAT_ADDR 0x7bfc +#define VPD_BASE 0 + +/** + * t4_seeprom_wp - enable/disable EEPROM write protection + * @adapter: the adapter + * @enable: whether to enable or disable write protection + * + * Enables or disables write protection on the serial EEPROM. + */ +int t4_seeprom_wp(struct adapter *adapter, bool enable) +{ + unsigned int v = enable ? 0xc : 0; + int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v); + return ret < 0 ? ret : 0; +} + +/** + * get_vpd_params - read VPD parameters from VPD EEPROM + * @adapter: adapter to read + * @p: where to store the parameters + * + * Reads card parameters stored in VPD EEPROM. + */ +static int get_vpd_params(struct adapter *adapter, struct vpd_params *p) +{ + int ret; + struct t4_vpd vpd; + u8 *q = (u8 *)&vpd, csum; + + ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(vpd), &vpd); + if (ret < 0) + return ret; + + for (csum = 0; q <= vpd.rv_data; q++) + csum += *q; + + if (csum) { + dev_err(adapter->pdev_dev, + "corrupted VPD EEPROM, actual csum %u\n", csum); + return -EINVAL; + } + + p->cclk = simple_strtoul(vpd.cclk_data, NULL, 10); + memcpy(p->id, vpd.id_data, sizeof(vpd.id_data)); + strim(p->id); + memcpy(p->ec, vpd.ec_data, sizeof(vpd.ec_data)); + strim(p->ec); + memcpy(p->sn, vpd.sn_data, sizeof(vpd.sn_data)); + strim(p->sn); + return 0; +} + +/* serial flash and firmware constants */ +enum { + SF_ATTEMPTS = 10, /* max retries for SF operations */ + + /* flash command opcodes */ + SF_PROG_PAGE = 2, /* program page */ + SF_WR_DISABLE = 4, /* disable writes */ + SF_RD_STATUS = 5, /* read status register */ + SF_WR_ENABLE = 6, /* enable writes */ + SF_RD_DATA_FAST = 0xb, /* read flash */ + SF_ERASE_SECTOR = 0xd8, /* erase sector */ + + FW_START_SEC = 8, /* first flash sector for FW */ + FW_END_SEC = 15, /* last flash sector for FW */ + FW_IMG_START = FW_START_SEC * SF_SEC_SIZE, + FW_MAX_SIZE = (FW_END_SEC - FW_START_SEC + 1) * SF_SEC_SIZE, +}; + +/** + * sf1_read - read data from the serial flash + * @adapter: the adapter + * @byte_cnt: number of bytes to read + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @valp: where to store the read data + * + * Reads up to 4 bytes of data from the serial flash. The location of + * the read needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont, + int lock, u32 *valp) +{ + int ret; + + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (t4_read_reg(adapter, A_SF_OP) & F_BUSY) + return -EBUSY; + t4_write_reg(adapter, A_SF_OP, + V_SF_LOCK(lock) | V_CONT(cont) | V_BYTECNT(byte_cnt - 1)); + ret = t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5); + if (!ret) + *valp = t4_read_reg(adapter, A_SF_DATA); + return ret; +} + +/** + * sf1_write - write data to the serial flash + * @adapter: the adapter + * @byte_cnt: number of bytes to write + * @cont: whether another operation will be chained + * @lock: whether to lock SF for PL access only + * @val: value to write + * + * Writes up to 4 bytes of data to the serial flash. The location of + * the write needs to be specified prior to calling this by issuing the + * appropriate commands to the serial flash. + */ +static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont, + int lock, u32 val) +{ + if (!byte_cnt || byte_cnt > 4) + return -EINVAL; + if (t4_read_reg(adapter, A_SF_OP) & F_BUSY) + return -EBUSY; + t4_write_reg(adapter, A_SF_DATA, val); + t4_write_reg(adapter, A_SF_OP, V_SF_LOCK(lock) | + V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1)); + return t4_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 5); +} + +/** + * flash_wait_op - wait for a flash operation to complete + * @adapter: the adapter + * @attempts: max number of polls of the status register + * @delay: delay between polls in ms + * + * Wait for a flash operation to complete by polling the status register. + */ +static int flash_wait_op(struct adapter *adapter, int attempts, int delay) +{ + int ret; + u32 status; + + while (1) { + if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 || + (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0) + return ret; + if (!(status & 1)) + return 0; + if (--attempts == 0) + return -EAGAIN; + if (delay) + msleep(delay); + } +} + +/** + * t4_read_flash - read words from serial flash + * @adapter: the adapter + * @addr: the start address for the read + * @nwords: how many 32-bit words to read + * @data: where to store the read data + * @byte_oriented: whether to store data as bytes or as words + * + * Read the specified number of 32-bit words from the serial flash. + * If @byte_oriented is set the read data is stored as a byte array + * (i.e., big-endian), otherwise as 32-bit words in the platform's + * natural endianess. + */ +int t4_read_flash(struct adapter *adapter, unsigned int addr, + unsigned int nwords, u32 *data, int byte_oriented) +{ + int ret; + + if (addr + nwords * sizeof(u32) > SF_SIZE || (addr & 3)) + return -EINVAL; + + addr = swab32(addr) | SF_RD_DATA_FAST; + + if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 || + (ret = sf1_read(adapter, 1, 1, 0, data)) != 0) + return ret; + + for ( ; nwords; nwords--, data++) { + ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data); + if (nwords == 1) + t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ + if (ret) + return ret; + if (byte_oriented) + *data = htonl(*data); + } + return 0; +} + +/** + * t4_write_flash - write up to a page of data to the serial flash + * @adapter: the adapter + * @addr: the start address to write + * @n: length of data to write in bytes + * @data: the data to write + * + * Writes up to a page of data (256 bytes) to the serial flash starting + * at the given address. All the data must be written to the same page. + */ +static int t4_write_flash(struct adapter *adapter, unsigned int addr, + unsigned int n, const u8 *data) +{ + int ret; + u32 buf[64]; + unsigned int i, c, left, val, offset = addr & 0xff; + + if (addr >= SF_SIZE || offset + n > SF_PAGE_SIZE) + return -EINVAL; + + val = swab32(addr) | SF_PROG_PAGE; + + if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || + (ret = sf1_write(adapter, 4, 1, 1, val)) != 0) + goto unlock; + + for (left = n; left; left -= c) { + c = min(left, 4U); + for (val = 0, i = 0; i < c; ++i) + val = (val << 8) + *data++; + + ret = sf1_write(adapter, c, c != left, 1, val); + if (ret) + goto unlock; + } + ret = flash_wait_op(adapter, 5, 1); + if (ret) + goto unlock; + + t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ + + /* Read the page to verify the write succeeded */ + ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1); + if (ret) + return ret; + + if (memcmp(data - n, (u8 *)buf + offset, n)) { + dev_err(adapter->pdev_dev, + "failed to correctly write the flash page at %#x\n", + addr); + return -EIO; + } + return 0; + +unlock: + t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ + return ret; +} + +/** + * get_fw_version - read the firmware version + * @adapter: the adapter + * @vers: where to place the version + * + * Reads the FW version from flash. + */ +static int get_fw_version(struct adapter *adapter, u32 *vers) +{ + return t4_read_flash(adapter, + FW_IMG_START + offsetof(struct fw_hdr, fw_ver), 1, + vers, 0); +} + +/** + * get_tp_version - read the TP microcode version + * @adapter: the adapter + * @vers: where to place the version + * + * Reads the TP microcode version from flash. + */ +static int get_tp_version(struct adapter *adapter, u32 *vers) +{ + return t4_read_flash(adapter, FW_IMG_START + offsetof(struct fw_hdr, + tp_microcode_ver), + 1, vers, 0); +} + +/** + * t4_check_fw_version - check if the FW is compatible with this driver + * @adapter: the adapter + * + * Checks if an adapter's FW is compatible with the driver. Returns 0 + * if there's exact match, a negative error if the version could not be + * read or there's a major version mismatch, and a positive value if the + * expected major version is found but there's a minor version mismatch. + */ +int t4_check_fw_version(struct adapter *adapter) +{ + int ret, major, minor; + + ret = get_fw_version(adapter, &adapter->params.fw_vers); + if (!ret) + ret = get_tp_version(adapter, &adapter->params.tp_vers); + if (ret) + return ret; + + major = G_FW_HDR_FW_VER_MAJOR(adapter->params.fw_vers); + minor = G_FW_HDR_FW_VER_MINOR(adapter->params.fw_vers); + + if (major != FW_VERSION_MAJOR) { /* major mismatch - fail */ + dev_err(adapter->pdev_dev, + "card FW has major version %u, driver wants %u\n", + major, FW_VERSION_MAJOR); + return -EINVAL; + } + + if (minor == FW_VERSION_MINOR) /* perfect match */ + return 0; + + /* Minor version mismatch. Report it but often it can be dealt with. */ + dev_warn(adapter->pdev_dev, "FW minor version mismatch, found %u.%u, " + "prefer %u.%u\n", major, minor, FW_VERSION_MAJOR, + FW_VERSION_MINOR); + return minor < FW_VERSION_MINOR ? 1 : 2; +} + +/** + * t4_flash_erase_sectors - erase a range of flash sectors + * @adapter: the adapter + * @start: the first sector to erase + * @end: the last sector to erase + * + * Erases the sectors in the given inclusive range. + */ +static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end) +{ + int ret = 0; + + while (start <= end) { + if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 || + (ret = sf1_write(adapter, 4, 0, 1, + SF_ERASE_SECTOR | (start << 8))) != 0 || + (ret = flash_wait_op(adapter, 5, 500)) != 0) { + dev_err(adapter->pdev_dev, + "erase of flash sector %d failed, error %d\n", + start, ret); + break; + } + start++; + } + t4_write_reg(adapter, A_SF_OP, 0); /* unlock SF */ + return ret; +} + +/** + * t4_load_fw - download firmware + * @adap: the adapter + * @fw_data: the firmware image to write + * @size: image size + * + * Write the supplied firmware image to the card's serial flash. + */ +int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size) +{ + u32 csum; + __be32 vers; + int ret, addr; + unsigned int i; + u8 first_page[SF_PAGE_SIZE]; + const u32 *p = (const u32 *)fw_data; + struct fw_hdr *hdr = (struct fw_hdr *)fw_data; + + if (!size) { + dev_err(adap->pdev_dev, "FW image has no data\n"); + return -EINVAL; + } + if (size & 511) { + dev_err(adap->pdev_dev, + "FW image size not multiple of 512 bytes\n"); + return -EINVAL; + } + if (ntohs(hdr->len512) * 512 != size) { + dev_err(adap->pdev_dev, + "FW image size differs from size in FW header\n"); + return -EINVAL; + } + if (size > FW_MAX_SIZE) { + dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n", + FW_MAX_SIZE); + return -EFBIG; + } + + for (csum = 0, i = 0; i < size / sizeof(csum); i++) + csum += ntohl(p[i]); + + if (csum != 0xffffffff) { + dev_err(adap->pdev_dev, + "corrupted firmware image, checksum %#x\n", csum); + return -EINVAL; + } + + i = DIV_ROUND_UP(size, SF_SEC_SIZE); /* # of sectors spanned */ + ret = t4_flash_erase_sectors(adap, FW_START_SEC, FW_START_SEC + i - 1); + if (ret) + goto out; + + /* + * We write the correct version at the end so the driver can see a bad + * version if the FW write fails. Start by writing a copy of the + * first page with a bad version. + */ + vers = hdr->fw_ver; + memcpy(first_page, fw_data, SF_PAGE_SIZE); + ((struct fw_hdr *)first_page)->fw_ver = htonl(0xffffffff); + ret = t4_write_flash(adap, FW_IMG_START, SF_PAGE_SIZE, first_page); + if (ret) + goto out; + + addr = FW_IMG_START; + for (size -= SF_PAGE_SIZE ; size; size -= SF_PAGE_SIZE) { + addr += SF_PAGE_SIZE; + fw_data += SF_PAGE_SIZE; + ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data); + if (ret) + goto out; + } + + ret = t4_write_flash(adap, + FW_IMG_START + offsetof(struct fw_hdr, fw_ver), + sizeof(vers), (const u8 *)&vers); +out: + if (ret) + dev_err(adap->pdev_dev, "firmware download failed, error %d\n", + ret); + return ret; +} + +#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\ + FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_ANEG) + +/** + * t4_link_start - apply link configuration to MAC/PHY + * @phy: the PHY to setup + * @mac: the MAC to setup + * @lc: the requested link configuration + * + * Set up a port's MAC and PHY according to a desired link configuration. + * - If the PHY can auto-negotiate first decide what to advertise, then + * enable/disable auto-negotiation as desired, and reset. + * - If the PHY does not auto-negotiate just reset it. + * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC, + * otherwise do it later based on the outcome of auto-negotiation. + */ +int t4_link_start(struct adapter *adap, unsigned int mbox, unsigned int port, + struct link_config *lc) +{ + struct fw_port_cmd c; + unsigned int fc = 0, mdi = V_FW_PORT_MDI(FW_PORT_MDI_AUTO); + + lc->link_ok = 0; + if (lc->requested_fc & PAUSE_RX) + fc |= FW_PORT_CAP_FC_RX; + if (lc->requested_fc & PAUSE_TX) + fc |= FW_PORT_CAP_FC_TX; + + memset(&c, 0, sizeof(c)); + c.op_to_portid = htonl(V_FW_CMD_OP(FW_PORT_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_PORT_CMD_PORTID(port)); + c.action_to_len16 = htonl(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | + FW_LEN16(c)); + + if (!(lc->supported & FW_PORT_CAP_ANEG)) { + c.u.l1cfg.rcap = htonl((lc->supported & ADVERT_MASK) | fc); + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + } else if (lc->autoneg == AUTONEG_DISABLE) { + c.u.l1cfg.rcap = htonl(lc->requested_speed | fc | mdi); + lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX); + } else + c.u.l1cfg.rcap = htonl(lc->advertising | fc | mdi); + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_restart_aneg - restart autonegotiation + * @adap: the adapter + * @mbox: mbox to use for the FW command + * @port: the port id + * + * Restarts autonegotiation for the selected port. + */ +int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port) +{ + struct fw_port_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_portid = htonl(V_FW_CMD_OP(FW_PORT_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_PORT_CMD_PORTID(port)); + c.action_to_len16 = htonl(V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_L1_CFG) | + FW_LEN16(c)); + c.u.l1cfg.rcap = htonl(FW_PORT_CAP_ANEG); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_set_vlan_accel - configure HW VLAN extraction + * @adap: the adapter + * @ports: bitmap of adapter ports to operate on + * @on: enable (1) or disable (0) HW VLAN extraction + * + * Enables or disables HW extraction of VLAN tags for the ports specified + * by @ports. @ports is a bitmap with the ith bit designating the port + * associated with the ith adapter channel. + */ +void t4_set_vlan_accel(struct adapter *adap, unsigned int ports, int on) +{ + ports <<= S_VLANEXTENABLEPORT0; + t4_set_reg_field(adap, A_TP_OUT_CONFIG, ports, on ? ports : 0); +} + +struct intr_info { + unsigned int mask; /* bits to check in interrupt status */ + const char *msg; /* message to print or NULL */ + short stat_idx; /* stat counter to increment or -1 */ + unsigned short fatal; /* whether the condition reported is fatal */ +}; + +/** + * t4_handle_intr_status - table driven interrupt handler + * @adapter: the adapter that generated the interrupt + * @reg: the interrupt status register to process + * @acts: table of interrupt actions + * + * A table driven interrupt handler that applies a set of masks to an + * interrupt status word and performs the corresponding actions if the + * interrupts described by the mask have occured. The actions include + * optionally emitting a warning or alert message. The table is terminated + * by an entry specifying mask 0. Returns the number of fatal interrupt + * conditions. + */ +static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg, + const struct intr_info *acts) +{ + int fatal = 0; + unsigned int mask = 0; + unsigned int status = t4_read_reg(adapter, reg); + + for ( ; acts->mask; ++acts) { + if (!(status & acts->mask)) + continue; + if (acts->fatal) { + fatal++; + dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, + status & acts->mask); + } else if (acts->msg && printk_ratelimit()) + dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg, + status & acts->mask); + mask |= acts->mask; + } + status &= mask; + if (status) /* clear processed interrupts */ + t4_write_reg(adapter, reg, status); + return fatal; +} + +/* + * Interrupt handler for the PCIE module. + */ +static void pcie_intr_handler(struct adapter *adapter) +{ + static struct intr_info sysbus_intr_info[] = { + { F_RNPP, "RXNP array parity error", -1, 1 }, + { F_RPCP, "RXPC array parity error", -1, 1 }, + { F_RCIP, "RXCIF array parity error", -1, 1 }, + { F_RCCP, "Rx completions control array parity error", -1, 1 }, + { F_RFTP, "RXFT array parity error", -1, 1 }, + { 0 } + }; + static struct intr_info pcie_port_intr_info[] = { + { F_TPCP, "TXPC array parity error", -1, 1 }, + { F_TNPP, "TXNP array parity error", -1, 1 }, + { F_TFTP, "TXFT array parity error", -1, 1 }, + { F_TCAP, "TXCA array parity error", -1, 1 }, + { F_TCIP, "TXCIF array parity error", -1, 1 }, + { F_RCAP, "RXCA array parity error", -1, 1 }, + { F_OTDD, "outbound request TLP discarded", -1, 1 }, + { F_RDPE, "Rx data parity error", -1, 1 }, + { F_TDUE, "Tx uncorrectable data error", -1, 1 }, + { 0 } + }; + static struct intr_info pcie_intr_info[] = { + { F_MSIADDRLPERR, "MSI AddrL parity error", -1, 1 }, + { F_MSIADDRHPERR, "MSI AddrH parity error", -1, 1 }, + { F_MSIDATAPERR, "MSI data parity error", -1, 1 }, + { F_MSIXADDRLPERR, "MSI-X AddrL parity error", -1, 1 }, + { F_MSIXADDRHPERR, "MSI-X AddrH parity error", -1, 1 }, + { F_MSIXDATAPERR, "MSI-X data parity error", -1, 1 }, + { F_MSIXDIPERR, "MSI-X DI parity error", -1, 1 }, + { F_PIOCPLPERR, "PCI PIO completion FIFO parity error", -1, 1 }, + { F_PIOREQPERR, "PCI PIO request FIFO parity error", -1, 1 }, + { F_TARTAGPERR, "PCI PCI target tag FIFO parity error", -1, 1 }, + { F_CCNTPERR, "PCI CMD channel count parity error", -1, 1 }, + { F_CREQPERR, "PCI CMD channel request parity error", -1, 1 }, + { F_CRSPPERR, "PCI CMD channel response parity error", -1, 1 }, + { F_DCNTPERR, "PCI DMA channel count parity error", -1, 1 }, + { F_DREQPERR, "PCI DMA channel request parity error", -1, 1 }, + { F_DRSPPERR, "PCI DMA channel response parity error", -1, 1 }, + { F_HCNTPERR, "PCI HMA channel count parity error", -1, 1 }, + { F_HREQPERR, "PCI HMA channel request parity error", -1, 1 }, + { F_HRSPPERR, "PCI HMA channel response parity error", -1, 1 }, + { F_CFGSNPPERR, "PCI config snoop FIFO parity error", -1, 1 }, + { F_FIDPERR, "PCI FID parity error", -1, 1 }, + { F_INTXCLRPERR, "PCI INTx clear parity error", -1, 1 }, + { F_MATAGPERR, "PCI MA tag parity error", -1, 1 }, + { F_PIOTAGPERR, "PCI PIO tag parity error", -1, 1 }, + { F_RXCPLPERR, "PCI Rx completion parity error", -1, 1 }, + { F_RXWRPERR, "PCI Rx write parity error", -1, 1 }, + { F_RPLPERR, "PCI replay buffer parity error", -1, 1 }, + { F_PCIESINT, "PCI core secondary fault", -1, 1 }, + { F_PCIEPINT, "PCI core primary fault", -1, 1 }, + { F_UNXSPLCPLERR, "PCI unexpected split completion error", -1, + 0 }, + { 0 } + }; + + int fat; + + fat = t4_handle_intr_status(adapter, + A_PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, + sysbus_intr_info) + + t4_handle_intr_status(adapter, + A_PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, + pcie_port_intr_info) + + t4_handle_intr_status(adapter, A_PCIE_INT_CAUSE, pcie_intr_info); + if (fat) + t4_fatal_err(adapter); +} + +/* + * TP interrupt handler. + */ +static void tp_intr_handler(struct adapter *adapter) +{ + static struct intr_info tp_intr_info[] = { + { 0x3fffffff, "TP parity error", -1, 1 }, + { F_FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adapter, A_TP_INT_CAUSE, tp_intr_info)) + t4_fatal_err(adapter); +} + +/* + * SGE interrupt handler. + */ +static void sge_intr_handler(struct adapter *adapter) +{ + u64 v; + + static struct intr_info sge_intr_info[] = { + { F_ERR_CPL_EXCEED_IQE_SIZE, + "SGE received CPL exceeding IQE size", -1, 1 }, + { F_ERR_INVALID_CIDX_INC, + "SGE GTS CIDX increment too large", -1, 0 }, + { F_ERR_CPL_OPCODE_0, "SGE received 0-length CPL", -1, 0 }, + { F_ERR_DROPPED_DB, "SGE doorbell dropped", -1, 0 }, + { F_ERR_DATA_CPL_ON_HIGH_QID1 | F_ERR_DATA_CPL_ON_HIGH_QID0, + "SGE IQID > 1023 received CPL for FL", -1, 0 }, + { F_ERR_BAD_DB_PIDX3, "SGE DBP 3 pidx increment too large", -1, + 0 }, + { F_ERR_BAD_DB_PIDX2, "SGE DBP 2 pidx increment too large", -1, + 0 }, + { F_ERR_BAD_DB_PIDX1, "SGE DBP 1 pidx increment too large", -1, + 0 }, + { F_ERR_BAD_DB_PIDX0, "SGE DBP 0 pidx increment too large", -1, + 0 }, + { F_ERR_ING_CTXT_PRIO, + "SGE too many priority ingress contexts", -1, 0 }, + { F_ERR_EGR_CTXT_PRIO, + "SGE too many priority egress contexts", -1, 0 }, + { F_INGRESS_SIZE_ERR, "SGE illegal ingress QID", -1, 0 }, + { F_EGRESS_SIZE_ERR, "SGE illegal egress QID", -1, 0 }, + { 0 } + }; + + v = (u64)t4_read_reg(adapter, A_SGE_INT_CAUSE1) | + ((u64)t4_read_reg(adapter, A_SGE_INT_CAUSE2) << 32); + if (v) { + dev_alert(adapter->pdev_dev, "SGE parity error (%#llx)\n", + (unsigned long long)v); + t4_write_reg(adapter, A_SGE_INT_CAUSE1, v); + t4_write_reg(adapter, A_SGE_INT_CAUSE2, v >> 32); + } + + if (t4_handle_intr_status(adapter, A_SGE_INT_CAUSE3, sge_intr_info) || + v != 0) + t4_fatal_err(adapter); +} + +#define CIM_OBQ_INTR (F_OBQULP0PARERR | F_OBQULP1PARERR | F_OBQULP2PARERR |\ + F_OBQULP3PARERR | F_OBQSGEPARERR | F_OBQNCSIPARERR) +#define CIM_IBQ_INTR (F_IBQTP0PARERR | F_IBQTP1PARERR | F_IBQULPPARERR |\ + F_IBQSGEHIPARERR | F_IBQSGELOPARERR | F_IBQNCSIPARERR) + +/* + * CIM interrupt handler. + */ +static void cim_intr_handler(struct adapter *adapter) +{ + static struct intr_info cim_intr_info[] = { + { F_PREFDROPINT, "CIM control register prefetch drop", -1, 1 }, + { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 }, + { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 }, + { F_MBUPPARERR, "CIM mailbox uP parity error", -1, 1 }, + { F_MBHOSTPARERR, "CIM mailbox host parity error", -1, 1 }, + { F_TIEQINPARERRINT, "CIM TIEQ outgoing parity error", -1, 1 }, + { F_TIEQOUTPARERRINT, "CIM TIEQ incoming parity error", -1, 1 }, + { 0 } + }; + static struct intr_info cim_upintr_info[] = { + { F_RSVDSPACEINT, "CIM reserved space access", -1, 1 }, + { F_ILLTRANSINT, "CIM illegal transaction", -1, 1 }, + { F_ILLWRINT, "CIM illegal write", -1, 1 }, + { F_ILLRDINT, "CIM illegal read", -1, 1 }, + { F_ILLRDBEINT, "CIM illegal read BE", -1, 1 }, + { F_ILLWRBEINT, "CIM illegal write BE", -1, 1 }, + { F_SGLRDBOOTINT, "CIM single read from boot space", -1, 1 }, + { F_SGLWRBOOTINT, "CIM single write to boot space", -1, 1 }, + { F_BLKWRBOOTINT, "CIM block write to boot space", -1, 1 }, + { F_SGLRDFLASHINT, "CIM single read from flash space", -1, 1 }, + { F_SGLWRFLASHINT, "CIM single write to flash space", -1, 1 }, + { F_BLKWRFLASHINT, "CIM block write to flash space", -1, 1 }, + { F_SGLRDEEPROMINT, "CIM single EEPROM read", -1, 1 }, + { F_SGLWREEPROMINT, "CIM single EEPROM write", -1, 1 }, + { F_BLKRDEEPROMINT, "CIM block EEPROM read", -1, 1 }, + { F_BLKWREEPROMINT, "CIM block EEPROM write", -1, 1 }, + { F_SGLRDCTLINT , "CIM single read from CTL space", -1, 1 }, + { F_SGLWRCTLINT , "CIM single write to CTL space", -1, 1 }, + { F_BLKRDCTLINT , "CIM block read from CTL space", -1, 1 }, + { F_BLKWRCTLINT , "CIM block write to CTL space", -1, 1 }, + { F_SGLRDPLINT , "CIM single read from PL space", -1, 1 }, + { F_SGLWRPLINT , "CIM single write to PL space", -1, 1 }, + { F_BLKRDPLINT , "CIM block read from PL space", -1, 1 }, + { F_BLKWRPLINT , "CIM block write to PL space", -1, 1 }, + { F_REQOVRLOOKUPINT , "CIM request FIFO overwrite", -1, 1 }, + { F_RSPOVRLOOKUPINT , "CIM response FIFO overwrite", -1, 1 }, + { F_TIMEOUTINT , "CIM PIF timeout", -1, 1 }, + { F_TIMEOUTMAINT , "CIM PIF MA timeout", -1, 1 }, + { 0 } + }; + + int fat; + + fat = t4_handle_intr_status(adapter, A_CIM_HOST_INT_CAUSE, + cim_intr_info) + + t4_handle_intr_status(adapter, A_CIM_HOST_UPACC_INT_CAUSE, + cim_upintr_info); + if (fat) + t4_fatal_err(adapter); +} + +/* + * ULP RX interrupt handler. + */ +static void ulprx_intr_handler(struct adapter *adapter) +{ + static struct intr_info ulprx_intr_info[] = { + { 0x7fffff, "ULPRX parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adapter, A_ULP_RX_INT_CAUSE, ulprx_intr_info)) + t4_fatal_err(adapter); +} + +/* + * ULP TX interrupt handler. + */ +static void ulptx_intr_handler(struct adapter *adapter) +{ + static struct intr_info ulptx_intr_info[] = { + { F_PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds", -1, + 0 }, + { F_PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds", -1, + 0 }, + { F_PBL_BOUND_ERR_CH1, "ULPTX channel 1 PBL out of bounds", -1, + 0 }, + { F_PBL_BOUND_ERR_CH0, "ULPTX channel 0 PBL out of bounds", -1, + 0 }, + { 0xfffffff, "ULPTX parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adapter, A_ULP_TX_INT_CAUSE, ulptx_intr_info)) + t4_fatal_err(adapter); +} + +/* + * PM TX interrupt handler. + */ +static void pmtx_intr_handler(struct adapter *adapter) +{ + static struct intr_info pmtx_intr_info[] = { + { F_PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large", -1, 1 }, + { F_PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large", -1, 1 }, + { F_PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large", -1, 1 }, + { F_ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1 }, + { 0xffffff0, "PMTX framing error", -1, 1 }, + { F_OESPI_PAR_ERROR, "PMTX oespi parity error", -1, 1 }, + { F_DB_OPTIONS_PAR_ERROR, "PMTX db_options parity error", -1, + 1 }, + { F_ICSPI_PAR_ERROR, "PMTX icspi parity error", -1, 1 }, + { F_C_PCMD_PAR_ERROR, "PMTX c_pcmd parity error", -1, 1}, + { 0 } + }; + + if (t4_handle_intr_status(adapter, A_PM_TX_INT_CAUSE, pmtx_intr_info)) + t4_fatal_err(adapter); +} + +/* + * PM RX interrupt handler. + */ +static void pmrx_intr_handler(struct adapter *adapter) +{ + static struct intr_info pmrx_intr_info[] = { + { F_ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1 }, + { 0x3ffff0, "PMRX framing error", -1, 1 }, + { F_OCSPI_PAR_ERROR, "PMRX ocspi parity error", -1, 1 }, + { F_DB_OPTIONS_PAR_ERROR, "PMRX db_options parity error", -1, + 1 }, + { F_IESPI_PAR_ERROR, "PMRX iespi parity error", -1, 1 }, + { F_E_PCMD_PAR_ERROR, "PMRX e_pcmd parity error", -1, 1}, + { 0 } + }; + + if (t4_handle_intr_status(adapter, A_PM_RX_INT_CAUSE, pmrx_intr_info)) + t4_fatal_err(adapter); +} + +/* + * CPL switch interrupt handler. + */ +static void cplsw_intr_handler(struct adapter *adapter) +{ + static struct intr_info cplsw_intr_info[] = { + { F_CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error", -1, 1 }, + { F_CIM_OVFL_ERROR, "CPLSW CIM overflow", -1, 1 }, + { F_TP_FRAMING_ERROR, "CPLSW TP framing error", -1, 1 }, + { F_SGE_FRAMING_ERROR, "CPLSW SGE framing error", -1, 1 }, + { F_CIM_FRAMING_ERROR, "CPLSW CIM framing error", -1, 1 }, + { F_ZERO_SWITCH_ERROR, "CPLSW no-switch error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adapter, A_CPL_INTR_CAUSE, cplsw_intr_info)) + t4_fatal_err(adapter); +} + +/* + * LE interrupt handler. + */ +static void le_intr_handler(struct adapter *adap) +{ + static struct intr_info le_intr_info[] = { + { F_LIPMISS, "LE LIP miss", -1, 0 }, + { F_LIP0, "LE 0 LIP error", -1, 0 }, + { F_PARITYERR, "LE parity error", -1, 1 }, + { F_UNKNOWNCMD, "LE unknown command", -1, 1 }, + { F_REQQPARERR, "LE request queue parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adap, A_LE_DB_INT_CAUSE, le_intr_info)) + t4_fatal_err(adap); +} + +/* + * MPS interrupt handler. + */ +static void mps_intr_handler(struct adapter *adapter) +{ + static struct intr_info mps_rx_intr_info[] = { + { 0xffffff, "MPS Rx parity error", -1, 1 }, + { 0 } + }; + static struct intr_info mps_tx_intr_info[] = { + { V_TPFIFO(M_TPFIFO), "MPS Tx TP FIFO parity error", -1, 1 }, + { F_NCSIFIFO, "MPS Tx NC-SI FIFO parity error", -1, 1 }, + { V_TXDATAFIFO(M_TXDATAFIFO), "MPS Tx data FIFO parity error", + -1, 1 }, + { V_TXDESCFIFO(M_TXDESCFIFO), "MPS Tx desc FIFO parity error", + -1, 1 }, + { F_BUBBLE, "MPS Tx underflow", -1, 1 }, + { F_SECNTERR, "MPS Tx SOP/EOP error", -1, 1 }, + { F_FRMERR, "MPS Tx framing error", -1, 1 }, + { 0 } + }; + static struct intr_info mps_trc_intr_info[] = { + { V_FILTMEM(M_FILTMEM), "MPS TRC filter parity error", -1, 1 }, + { V_PKTFIFO(M_PKTFIFO), "MPS TRC packet FIFO parity error", -1, + 1 }, + { F_MISCPERR, "MPS TRC misc parity error", -1, 1 }, + { 0 } + }; + static struct intr_info mps_stat_sram_intr_info[] = { + { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 }, + { 0 } + }; + static struct intr_info mps_stat_tx_intr_info[] = { + { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 }, + { 0 } + }; + static struct intr_info mps_stat_rx_intr_info[] = { + { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 }, + { 0 } + }; + static struct intr_info mps_cls_intr_info[] = { + { F_MATCHSRAM, "MPS match SRAM parity error", -1, 1 }, + { F_MATCHTCAM, "MPS match TCAM parity error", -1, 1 }, + { F_HASHSRAM, "MPS hash SRAM parity error", -1, 1 }, + { 0 } + }; + + int fat; + + fat = t4_handle_intr_status(adapter, A_MPS_RX_PERR_INT_CAUSE, + mps_rx_intr_info) + + t4_handle_intr_status(adapter, A_MPS_TX_INT_CAUSE, + mps_tx_intr_info) + + t4_handle_intr_status(adapter, A_MPS_TRC_INT_CAUSE, + mps_trc_intr_info) + + t4_handle_intr_status(adapter, A_MPS_STAT_PERR_INT_CAUSE_SRAM, + mps_stat_sram_intr_info) + + t4_handle_intr_status(adapter, A_MPS_STAT_PERR_INT_CAUSE_TX_FIFO, + mps_stat_tx_intr_info) + + t4_handle_intr_status(adapter, A_MPS_STAT_PERR_INT_CAUSE_RX_FIFO, + mps_stat_rx_intr_info) + + t4_handle_intr_status(adapter, A_MPS_CLS_INT_CAUSE, + mps_cls_intr_info); + + t4_write_reg(adapter, A_MPS_INT_CAUSE, F_CLSINT | F_TRCINT | + F_RXINT | F_TXINT | F_STATINT); + t4_read_reg(adapter, A_MPS_INT_CAUSE); /* flush */ + if (fat) + t4_fatal_err(adapter); +} + +#define MEM_INT_MASK (F_PERR_INT_CAUSE | F_ECC_CE_INT_CAUSE | F_ECC_UE_INT_CAUSE) + +/* + * EDC/MC interrupt handler. + */ +static void mem_intr_handler(struct adapter *adapter, int idx) +{ + static const char name[3][5] = { "EDC0", "EDC1", "MC" }; + + unsigned int addr, cnt_addr, v; + + if (idx <= MEM_EDC1) { + addr = EDC_REG(A_EDC_INT_CAUSE, idx); + cnt_addr = EDC_REG(A_EDC_ECC_STATUS, idx); + } else { + addr = A_MC_INT_CAUSE; + cnt_addr = A_MC_ECC_STATUS; + } + + v = t4_read_reg(adapter, addr) & MEM_INT_MASK; + if (v & F_PERR_INT_CAUSE) + dev_alert(adapter->pdev_dev, "%s FIFO parity error\n", + name[idx]); + if (v & F_ECC_CE_INT_CAUSE) { + u32 cnt = G_ECC_CECNT(t4_read_reg(adapter, cnt_addr)); + + t4_write_reg(adapter, cnt_addr, V_ECC_CECNT(M_ECC_CECNT)); + if (printk_ratelimit()) + dev_warn(adapter->pdev_dev, + "%u %s correctable ECC data error%s\n", + cnt, name[idx], cnt > 1 ? "s" : ""); + } + if (v & F_ECC_UE_INT_CAUSE) + dev_alert(adapter->pdev_dev, + "%s uncorrectable ECC data error\n", name[idx]); + + t4_write_reg(adapter, addr, v); + if (v & (F_PERR_INT_CAUSE | F_ECC_UE_INT_CAUSE)) + t4_fatal_err(adapter); +} + +/* + * MA interrupt handler. + */ +static void ma_intr_handler(struct adapter *adap) +{ + u32 v, status = t4_read_reg(adap, A_MA_INT_CAUSE); + + if (status & F_MEM_PERR_INT_CAUSE) + dev_alert(adap->pdev_dev, + "MA parity error, parity status %#x\n", + t4_read_reg(adap, A_MA_PARITY_ERROR_STATUS)); + if (status & F_MEM_WRAP_INT_CAUSE) { + v = t4_read_reg(adap, A_MA_INT_WRAP_STATUS); + dev_alert(adap->pdev_dev, "MA address wrap-around error by " + "client %u to address %#x\n", + G_MEM_WRAP_CLIENT_NUM(v), G_MEM_WRAP_ADDRESS(v) << 4); + } + t4_write_reg(adap, A_MA_INT_CAUSE, status); + t4_fatal_err(adap); +} + +/* + * SMB interrupt handler. + */ +static void smb_intr_handler(struct adapter *adap) +{ + static struct intr_info smb_intr_info[] = { + { F_MSTTXFIFOPARINT, "SMB master Tx FIFO parity error", -1, 1 }, + { F_MSTRXFIFOPARINT, "SMB master Rx FIFO parity error", -1, 1 }, + { F_SLVFIFOPARINT, "SMB slave FIFO parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adap, A_SMB_INT_CAUSE, smb_intr_info)) + t4_fatal_err(adap); +} + +/* + * NC-SI interrupt handler. + */ +static void ncsi_intr_handler(struct adapter *adap) +{ + static struct intr_info ncsi_intr_info[] = { + { F_CIM_DM_PRTY_ERR, "NC-SI CIM parity error", -1, 1 }, + { F_MPS_DM_PRTY_ERR, "NC-SI MPS parity error", -1, 1 }, + { F_TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error", -1, 1 }, + { F_RXFIFO_PRTY_ERR, "NC-SI Rx FIFO parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adap, A_NCSI_INT_CAUSE, ncsi_intr_info)) + t4_fatal_err(adap); +} + +/* + * XGMAC interrupt handler. + */ +static void xgmac_intr_handler(struct adapter *adap, int port) +{ + u32 v = t4_read_reg(adap, PORT_REG(port, A_XGMAC_PORT_INT_CAUSE)); + + v &= F_TXFIFO_PRTY_ERR | F_RXFIFO_PRTY_ERR; + if (!v) + return; + + if (v & F_TXFIFO_PRTY_ERR) + dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n", + port); + if (v & F_RXFIFO_PRTY_ERR) + dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n", + port); + t4_write_reg(adap, PORT_REG(port, A_XGMAC_PORT_INT_CAUSE), v); + t4_fatal_err(adap); +} + +/* + * PL interrupt handler. + */ +static void pl_intr_handler(struct adapter *adap) +{ + static struct intr_info pl_intr_info[] = { + { F_FATALPERR, "T4 fatal parity error", -1, 1 }, + { F_PERRVFID, "PL VFID_MAP parity error", -1, 1 }, + { 0 } + }; + + if (t4_handle_intr_status(adap, A_PL_PL_INT_CAUSE, pl_intr_info)) + t4_fatal_err(adap); +} + +#define PF_INTR_MASK (F_PFSW | F_PFCIM) +#define GLBL_INTR_MASK (F_CIM | F_MPS | F_PL | F_PCIE | F_MC | F_EDC0 | \ + F_EDC1 | F_LE | F_TP | F_MA | F_PM_TX | F_PM_RX | F_ULP_RX | \ + F_CPL_SWITCH | F_SGE | F_ULP_TX) + +/** + * t4_slow_intr_handler - control path interrupt handler + * @adapter: the adapter + * + * T4 interrupt handler for non-data global interrupt events, e.g., errors. + * The designation 'slow' is because it involves register reads, while + * data interrupts typically don't involve any MMIOs. + */ +int t4_slow_intr_handler(struct adapter *adapter) +{ + u32 cause = t4_read_reg(adapter, A_PL_INT_CAUSE); + + if (!(cause & GLBL_INTR_MASK)) + return 0; + if (cause & F_CIM) + cim_intr_handler(adapter); + if (cause & F_MPS) + mps_intr_handler(adapter); + if (cause & F_NCSI) + ncsi_intr_handler(adapter); + if (cause & F_PL) + pl_intr_handler(adapter); + if (cause & F_SMB) + smb_intr_handler(adapter); + if (cause & F_XGMAC0) + xgmac_intr_handler(adapter, 0); + if (cause & F_XGMAC1) + xgmac_intr_handler(adapter, 1); + if (cause & F_XGMAC_KR0) + xgmac_intr_handler(adapter, 2); + if (cause & F_XGMAC_KR1) + xgmac_intr_handler(adapter, 3); + if (cause & F_PCIE) + pcie_intr_handler(adapter); + if (cause & F_MC) + mem_intr_handler(adapter, MEM_MC); + if (cause & F_EDC0) + mem_intr_handler(adapter, MEM_EDC0); + if (cause & F_EDC1) + mem_intr_handler(adapter, MEM_EDC1); + if (cause & F_LE) + le_intr_handler(adapter); + if (cause & F_TP) + tp_intr_handler(adapter); + if (cause & F_MA) + ma_intr_handler(adapter); + if (cause & F_PM_TX) + pmtx_intr_handler(adapter); + if (cause & F_PM_RX) + pmrx_intr_handler(adapter); + if (cause & F_ULP_RX) + ulprx_intr_handler(adapter); + if (cause & F_CPL_SWITCH) + cplsw_intr_handler(adapter); + if (cause & F_SGE) + sge_intr_handler(adapter); + if (cause & F_ULP_TX) + ulptx_intr_handler(adapter); + + /* Clear the interrupts just processed for which we are the master. */ + t4_write_reg(adapter, A_PL_INT_CAUSE, cause & GLBL_INTR_MASK); + (void) t4_read_reg(adapter, A_PL_INT_CAUSE); /* flush */ + return 1; +} + +/** + * t4_intr_enable - enable interrupts + * @adapter: the adapter whose interrupts should be enabled + * + * Enable PF-specific interrupts for the calling function and the top-level + * interrupt concentrator for global interrupts. Interrupts are already + * enabled at each module, here we just enable the roots of the interrupt + * hierarchies. + * + * Note: this function should be called only when the driver manages + * non PF-specific interrupts from the various HW modules. Only one PCI + * function at a time should be doing this. + */ +void t4_intr_enable(struct adapter *adapter) +{ + u32 pf = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI)); + + t4_write_reg(adapter, A_SGE_INT_ENABLE3, F_ERR_CPL_EXCEED_IQE_SIZE | + F_ERR_INVALID_CIDX_INC | F_ERR_CPL_OPCODE_0 | + F_ERR_DROPPED_DB | F_ERR_DATA_CPL_ON_HIGH_QID1 | + F_ERR_DATA_CPL_ON_HIGH_QID0 | F_ERR_BAD_DB_PIDX3 | + F_ERR_BAD_DB_PIDX2 | F_ERR_BAD_DB_PIDX1 | + F_ERR_BAD_DB_PIDX0 | F_ERR_ING_CTXT_PRIO | + F_ERR_EGR_CTXT_PRIO | F_INGRESS_SIZE_ERR | + F_EGRESS_SIZE_ERR); + t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), PF_INTR_MASK); + t4_set_reg_field(adapter, A_PL_INT_MAP0, 0, 1 << pf); +} + +/** + * t4_intr_disable - disable interrupts + * @adapter: the adapter whose interrupts should be disabled + * + * Disable interrupts. We only disable the top-level interrupt + * concentrators. The caller must be a PCI function managing global + * interrupts. + */ +void t4_intr_disable(struct adapter *adapter) +{ + u32 pf = G_SOURCEPF(t4_read_reg(adapter, A_PL_WHOAMI)); + + t4_write_reg(adapter, MYPF_REG(A_PL_PF_INT_ENABLE), 0); + t4_set_reg_field(adapter, A_PL_INT_MAP0, 1 << pf, 0); +} + +/** + * t4_intr_clear - clear all interrupts + * @adapter: the adapter whose interrupts should be cleared + * + * Clears all interrupts. The caller must be a PCI function managing + * global interrupts. + */ +void t4_intr_clear(struct adapter *adapter) +{ + static const unsigned int cause_reg[] = { + A_SGE_INT_CAUSE1, A_SGE_INT_CAUSE2, A_SGE_INT_CAUSE3, + A_PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS, + A_PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS, + A_PCIE_NONFAT_ERR, A_PCIE_INT_CAUSE, + A_MC_INT_CAUSE, + A_MA_INT_WRAP_STATUS, A_MA_PARITY_ERROR_STATUS, A_MA_INT_CAUSE, + A_EDC_INT_CAUSE, EDC_REG(A_EDC_INT_CAUSE, 1), + A_CIM_HOST_INT_CAUSE, A_CIM_HOST_UPACC_INT_CAUSE, + MYPF_REG(A_CIM_PF_HOST_INT_CAUSE), + A_TP_INT_CAUSE, + A_ULP_RX_INT_CAUSE, A_ULP_TX_INT_CAUSE, + A_PM_RX_INT_CAUSE, A_PM_TX_INT_CAUSE, + A_MPS_RX_PERR_INT_CAUSE, + A_CPL_INTR_CAUSE, + MYPF_REG(A_PL_PF_INT_CAUSE), + A_PL_PL_INT_CAUSE, + A_LE_DB_INT_CAUSE, + }; + + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(cause_reg); ++i) + t4_write_reg(adapter, cause_reg[i], 0xffffffff); + + t4_write_reg(adapter, A_PL_INT_CAUSE, GLBL_INTR_MASK); + (void) t4_read_reg(adapter, A_PL_INT_CAUSE); /* flush */ +} + +/** + * hash_mac_addr - return the hash value of a MAC address + * @addr: the 48-bit Ethernet MAC address + * + * Hashes a MAC address according to the hash function used by HW inexact + * (hash) address matching. + */ +static int hash_mac_addr(const u8 *addr) +{ + u32 a = ((u32)addr[0] << 16) | ((u32)addr[1] << 8) | addr[2]; + u32 b = ((u32)addr[3] << 16) | ((u32)addr[4] << 8) | addr[5]; + a ^= b; + a ^= (a >> 12); + a ^= (a >> 6); + return a & 0x3f; +} + +/** + * t4_config_rss_range - configure a portion of the RSS mapping table + * @adapter: the adapter + * @mbox: mbox to use for the FW command + * @viid: virtual interface whose RSS subtable is to be written + * @start: start entry in the table to write + * @n: how many table entries to write + * @rspq: values for the response queue lookup table + * @nrspq: number of values in @rspq + * + * Programs the selected part of the VI's RSS mapping table with the + * provided values. If @nrspq < @n the supplied values are used repeatedly + * until the full table range is populated. + * + * The caller must ensure the values in @rspq are in the range allowed for + * @viid. + */ +int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid, + int start, int n, const u16 *rspq, unsigned int nrspq) +{ + int ret; + const u16 *rsp = rspq; + const u16 *rsp_end = rspq + nrspq; + struct fw_rss_ind_tbl_cmd cmd; + + memset(&cmd, 0, sizeof(cmd)); + cmd.op_to_viid = htonl(V_FW_CMD_OP(FW_RSS_IND_TBL_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE | + V_FW_RSS_IND_TBL_CMD_VIID(viid)); + cmd.retval_len16 = htonl(FW_LEN16(cmd)); + + /* each fw_rss_ind_tbl_cmd takes up to 32 entries */ + while (n > 0) { + int nq = min(n, 32); + __be32 *qp = &cmd.iq0_to_iq2; + + cmd.niqid = htons(nq); + cmd.startidx = htons(start); + + start += nq; + n -= nq; + + while (nq > 0) { + unsigned int v; + + v = V_FW_RSS_IND_TBL_CMD_IQ0(*rsp); + if (++rsp >= rsp_end) + rsp = rspq; + v |= V_FW_RSS_IND_TBL_CMD_IQ1(*rsp); + if (++rsp >= rsp_end) + rsp = rspq; + v |= V_FW_RSS_IND_TBL_CMD_IQ2(*rsp); + if (++rsp >= rsp_end) + rsp = rspq; + + *qp++ = htonl(v); + nq -= 3; + } + + ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL); + if (ret != FW_SUCCESS) + return ret; + } + return 0; +} + +/** + * t4_config_glbl_rss - configure the global RSS mode + * @adapter: the adapter + * @mbox: mbox to use for the FW command + * @mode: global RSS mode + * @flags: mode-specific flags + * + * Sets the global RSS mode. + */ +int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode, + unsigned int flags) +{ + struct fw_rss_glb_config_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_write = htonl(V_FW_CMD_OP(FW_RSS_GLB_CONFIG_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_WRITE); + c.retval_len16 = htonl(FW_LEN16(c)); + if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) { + c.u.manual.mode_pkd = htonl(V_FW_RSS_GLB_CONFIG_CMD_MODE(mode)); + } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { + c.u.basicvirtual.mode_pkd = + htonl(V_FW_RSS_GLB_CONFIG_CMD_MODE(mode)); + c.u.basicvirtual.synmapen_to_hashtoeplitz = htonl(flags); + } else + return -EINVAL; + return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL); +} + +/* Read an RSS table row */ +static int rd_rss_row(struct adapter *adap, int row, u32 *val) +{ + t4_write_reg(adap, A_TP_RSS_LKP_TABLE, 0xfff00000 | row); + return t4_wait_op_done_val(adap, A_TP_RSS_LKP_TABLE, F_LKPTBLROWVLD, 1, + 5, 0, val); +} + +/** + * t4_read_rss - read the contents of the RSS mapping table + * @adapter: the adapter + * @map: holds the contents of the RSS mapping table + * + * Reads the contents of the RSS hash->queue mapping table. + */ +int t4_read_rss(struct adapter *adapter, u16 *map) +{ + u32 val; + int i, ret; + + for (i = 0; i < RSS_NENTRIES / 2; ++i) { + ret = rd_rss_row(adapter, i, &val); + if (ret) + return ret; + *map++ = G_LKPTBLQUEUE0(val); + *map++ = G_LKPTBLQUEUE1(val); + } + return 0; +} + +/** + * t4_tp_get_tcp_stats - read TP's TCP MIB counters + * @adap: the adapter + * @v4: holds the TCP/IP counter values + * @v6: holds the TCP/IPv6 counter values + * + * Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters. + * Either @v4 or @v6 may be %NULL to skip the corresponding stats. + */ +void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4, + struct tp_tcp_stats *v6) +{ + u32 val[A_TP_MIB_TCP_RXT_SEG_LO - A_TP_MIB_TCP_OUT_RST + 1]; + +#define STAT_IDX(x) ((A_TP_MIB_TCP_##x) - A_TP_MIB_TCP_OUT_RST) +#define STAT(x) val[STAT_IDX(x)] +#define STAT64(x) (((u64)STAT(x##_HI) << 32) | STAT(x##_LO)) + + if (v4) { + t4_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, val, + ARRAY_SIZE(val), A_TP_MIB_TCP_OUT_RST); + v4->tcpOutRsts = STAT(OUT_RST); + v4->tcpInSegs = STAT64(IN_SEG); + v4->tcpOutSegs = STAT64(OUT_SEG); + v4->tcpRetransSegs = STAT64(RXT_SEG); + } + if (v6) { + t4_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, val, + ARRAY_SIZE(val), A_TP_MIB_TCP_V6OUT_RST); + v6->tcpOutRsts = STAT(OUT_RST); + v6->tcpInSegs = STAT64(IN_SEG); + v6->tcpOutSegs = STAT64(OUT_SEG); + v6->tcpRetransSegs = STAT64(RXT_SEG); + } +#undef STAT64 +#undef STAT +#undef STAT_IDX +} + +/** + * t4_tp_get_err_stats - read TP's error MIB counters + * @adap: the adapter + * @st: holds the counter values + * + * Returns the values of TP's error counters. + */ +void t4_tp_get_err_stats(struct adapter *adap, struct tp_err_stats *st) +{ + t4_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, st->macInErrs, + 12, A_TP_MIB_MAC_IN_ERR_0); + t4_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, st->tnlCongDrops, + 8, A_TP_MIB_TNL_CNG_DROP_0); + t4_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, st->tnlTxDrops, + 4, A_TP_MIB_TNL_DROP_0); + t4_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, st->ofldVlanDrops, + 4, A_TP_MIB_OFD_VLN_DROP_0); + t4_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, st->tcp6InErrs, + 4, A_TP_MIB_TCP_V6IN_ERR_0); + t4_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_DATA, &st->ofldNoNeigh, + 2, A_TP_MIB_OFD_ARP_DROP); +} + +/** + * t4_read_mtu_tbl - returns the values in the HW path MTU table + * @adap: the adapter + * @mtus: where to store the MTU values + * @mtu_log: where to store the MTU base-2 log (may be %NULL) + * + * Reads the HW path MTU table. + */ +void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log) +{ + u32 v; + int i; + + for (i = 0; i < NMTUS; ++i) { + t4_write_reg(adap, A_TP_MTU_TABLE, + V_MTUINDEX(0xff) | V_MTUVALUE(i)); + v = t4_read_reg(adap, A_TP_MTU_TABLE); + mtus[i] = G_MTUVALUE(v); + if (mtu_log) + mtu_log[i] = G_MTUWIDTH(v); + } +} + +/** + * init_cong_ctrl - initialize congestion control parameters + * @a: the alpha values for congestion control + * @b: the beta values for congestion control + * + * Initialize the congestion control parameters. + */ +static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b) +{ + a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1; + a[9] = 2; + a[10] = 3; + a[11] = 4; + a[12] = 5; + a[13] = 6; + a[14] = 7; + a[15] = 8; + a[16] = 9; + a[17] = 10; + a[18] = 14; + a[19] = 17; + a[20] = 21; + a[21] = 25; + a[22] = 30; + a[23] = 35; + a[24] = 45; + a[25] = 60; + a[26] = 80; + a[27] = 100; + a[28] = 200; + a[29] = 300; + a[30] = 400; + a[31] = 500; + + b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0; + b[9] = b[10] = 1; + b[11] = b[12] = 2; + b[13] = b[14] = b[15] = b[16] = 3; + b[17] = b[18] = b[19] = b[20] = b[21] = 4; + b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5; + b[28] = b[29] = 6; + b[30] = b[31] = 7; +} + +/* The minimum additive increment value for the congestion control table */ +#define CC_MIN_INCR 2U + +/** + * t4_load_mtus - write the MTU and congestion control HW tables + * @adap: the adapter + * @mtus: the values for the MTU table + * @alpha: the values for the congestion control alpha parameter + * @beta: the values for the congestion control beta parameter + * + * Write the HW MTU table with the supplied MTUs and the high-speed + * congestion control table with the supplied alpha, beta, and MTUs. + * We write the two tables together because the additive increments + * depend on the MTUs. + */ +void t4_load_mtus(struct adapter *adap, const unsigned short *mtus, + const unsigned short *alpha, const unsigned short *beta) +{ + static const unsigned int avg_pkts[NCCTRL_WIN] = { + 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640, + 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480, + 28672, 40960, 57344, 81920, 114688, 163840, 229376 + }; + + unsigned int i, w; + + for (i = 0; i < NMTUS; ++i) { + unsigned int mtu = mtus[i]; + unsigned int log2 = fls(mtu); + + if (!(mtu & ((1 << log2) >> 2))) /* round */ + log2--; + t4_write_reg(adap, A_TP_MTU_TABLE, V_MTUINDEX(i) | + V_MTUWIDTH(log2) | V_MTUVALUE(mtu)); + + for (w = 0; w < NCCTRL_WIN; ++w) { + unsigned int inc; + + inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w], + CC_MIN_INCR); + + t4_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) | + (w << 16) | (beta[w] << 13) | inc); + } + } +} + +/** + * t4_set_trace_filter - configure one of the tracing filters + * @adap: the adapter + * @tp: the desired trace filter parameters + * @idx: which filter to configure + * @enable: whether to enable or disable the filter + * + * Configures one of the tracing filters available in HW. If @enable is + * %0 @tp is not examined and may be %NULL. + */ +int t4_set_trace_filter(struct adapter *adap, const struct trace_params *tp, + int idx, int enable) +{ + int i, ofst = idx * 4; + u32 data_reg, mask_reg, cfg; + u32 multitrc = F_TRCMULTIFILTER; + + if (!enable) { + t4_write_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + ofst, 0); + goto out; + } + + if (tp->port > 11 || tp->invert > 1 || tp->skip_len > M_TFLENGTH || + tp->skip_ofst > M_TFOFFSET || tp->min_len > M_TFMINPKTSIZE || + tp->snap_len > 9600 || (idx && tp->snap_len > 256)) + return -EINVAL; + + if (tp->snap_len > 256) { /* must be tracer 0 */ + if ((t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + 4) | + t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + 8) | + t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + 12)) & + F_TFEN) + return -EINVAL; /* other tracers are enabled */ + multitrc = 0; + } else if (idx) { + i = t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_B); + if (G_TFCAPTUREMAX(i) > 256 && + (t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A) & F_TFEN)) + return -EINVAL; + } + + /* stop the tracer we'll be changing */ + t4_write_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + ofst, 0); + + /* disable tracing globally if running in the wrong single/multi mode */ + cfg = t4_read_reg(adap, A_MPS_TRC_CFG); + if ((cfg & F_TRCEN) && multitrc != (cfg & F_TRCMULTIFILTER)) { + t4_write_reg(adap, A_MPS_TRC_CFG, cfg ^ F_TRCEN); + t4_read_reg(adap, A_MPS_TRC_CFG); /* flush */ + msleep(1); + if (!(t4_read_reg(adap, A_MPS_TRC_CFG) & F_TRCFIFOEMPTY)) + return -ETIMEDOUT; + } + /* + * At this point either the tracing is enabled and in the right mode or + * disabled. + */ + + idx *= (A_MPS_TRC_FILTER1_MATCH - A_MPS_TRC_FILTER0_MATCH); + data_reg = A_MPS_TRC_FILTER0_MATCH + idx; + mask_reg = A_MPS_TRC_FILTER0_DONT_CARE + idx; + + for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) { + t4_write_reg(adap, data_reg, tp->data[i]); + t4_write_reg(adap, mask_reg, ~tp->mask[i]); + } + t4_write_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_B + ofst, + V_TFCAPTUREMAX(tp->snap_len) | + V_TFMINPKTSIZE(tp->min_len)); + t4_write_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + ofst, + V_TFOFFSET(tp->skip_ofst) | V_TFLENGTH(tp->skip_len) | + V_TFPORT(tp->port) | F_TFEN | V_TFINVERTMATCH(tp->invert)); + + cfg &= ~F_TRCMULTIFILTER; + t4_write_reg(adap, A_MPS_TRC_CFG, cfg | F_TRCEN | multitrc); +out: t4_read_reg(adap, A_MPS_TRC_CFG); /* flush */ + return 0; +} + +/** + * t4_get_trace_filter - query one of the tracing filters + * @adap: the adapter + * @tp: the current trace filter parameters + * @idx: which trace filter to query + * @enabled: non-zero if the filter is enabled + * + * Returns the current settings of one of the HW tracing filters. + */ +void t4_get_trace_filter(struct adapter *adap, struct trace_params *tp, int idx, + int *enabled) +{ + u32 ctla, ctlb; + int i, ofst = idx * 4; + u32 data_reg, mask_reg; + + ctla = t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_A + ofst); + ctlb = t4_read_reg(adap, A_MPS_TRC_FILTER_MATCH_CTL_B + ofst); + + *enabled = !!(ctla & F_TFEN); + tp->snap_len = G_TFCAPTUREMAX(ctlb); + tp->min_len = G_TFMINPKTSIZE(ctlb); + tp->skip_ofst = G_TFOFFSET(ctla); + tp->skip_len = G_TFLENGTH(ctla); + tp->invert = !!(ctla & F_TFINVERTMATCH); + tp->port = G_TFPORT(ctla); + + ofst = (A_MPS_TRC_FILTER1_MATCH - A_MPS_TRC_FILTER0_MATCH) * idx; + data_reg = A_MPS_TRC_FILTER0_MATCH + ofst; + mask_reg = A_MPS_TRC_FILTER0_DONT_CARE + ofst; + + for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) { + tp->mask[i] = ~t4_read_reg(adap, mask_reg); + tp->data[i] = t4_read_reg(adap, data_reg) & tp->mask[i]; + } +} + +/** + * get_mps_bg_map - return the buffer groups associated with a port + * @adap: the adapter + * @idx: the port index + * + * Returns a bitmap indicating which MPS buffer groups are associated + * with the given port. Bit i is set if buffer group i is used by the + * port. + */ +static unsigned int get_mps_bg_map(struct adapter *adap, int idx) +{ + u32 n = G_NUMPORTS(t4_read_reg(adap, A_MPS_CMN_CTL)); + + if (n == 0) + return idx == 0 ? 0xf : 0; + if (n == 1) + return idx < 2 ? (3 << (2 * idx)) : 0; + return 1 << idx; +} + +/** + * t4_get_port_stats - collect port statistics + * @adap: the adapter + * @idx: the port index + * @p: the stats structure to fill + * + * Collect statistics related to the given port from HW. + */ +void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p) +{ + u32 bgmap = get_mps_bg_map(adap, idx); + +#define GET_STAT(name) \ + t4_read_reg64(adap, PORT_REG(idx, A_MPS_PORT_STAT_##name##_L)) +#define GET_STAT_COM(name) t4_read_reg64(adap, A_MPS_STAT_##name##_L) + + p->tx_octets = GET_STAT(TX_PORT_BYTES); + p->tx_frames = GET_STAT(TX_PORT_FRAMES); + p->tx_bcast_frames = GET_STAT(TX_PORT_BCAST); + p->tx_mcast_frames = GET_STAT(TX_PORT_MCAST); + p->tx_ucast_frames = GET_STAT(TX_PORT_UCAST); + p->tx_error_frames = GET_STAT(TX_PORT_ERROR); + p->tx_frames_64 = GET_STAT(TX_PORT_64B); + p->tx_frames_65_127 = GET_STAT(TX_PORT_65B_127B); + p->tx_frames_128_255 = GET_STAT(TX_PORT_128B_255B); + p->tx_frames_256_511 = GET_STAT(TX_PORT_256B_511B); + p->tx_frames_512_1023 = GET_STAT(TX_PORT_512B_1023B); + p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B); + p->tx_frames_1519_max = GET_STAT(TX_PORT_1519B_MAX); + p->tx_drop = GET_STAT(TX_PORT_DROP); + p->tx_pause = GET_STAT(TX_PORT_PAUSE); + p->tx_ppp0 = GET_STAT(TX_PORT_PPP0); + p->tx_ppp1 = GET_STAT(TX_PORT_PPP1); + p->tx_ppp2 = GET_STAT(TX_PORT_PPP2); + p->tx_ppp3 = GET_STAT(TX_PORT_PPP3); + p->tx_ppp4 = GET_STAT(TX_PORT_PPP4); + p->tx_ppp5 = GET_STAT(TX_PORT_PPP5); + p->tx_ppp6 = GET_STAT(TX_PORT_PPP6); + p->tx_ppp7 = GET_STAT(TX_PORT_PPP7); + + p->rx_octets = GET_STAT(RX_PORT_BYTES); + p->rx_frames = GET_STAT(RX_PORT_FRAMES); + p->rx_bcast_frames = GET_STAT(RX_PORT_BCAST); + p->rx_mcast_frames = GET_STAT(RX_PORT_MCAST); + p->rx_ucast_frames = GET_STAT(RX_PORT_UCAST); + p->rx_too_long = GET_STAT(RX_PORT_MTU_ERROR); + p->rx_jabber = GET_STAT(RX_PORT_MTU_CRC_ERROR); + p->rx_fcs_err = GET_STAT(RX_PORT_CRC_ERROR); + p->rx_len_err = GET_STAT(RX_PORT_LEN_ERROR); + p->rx_symbol_err = GET_STAT(RX_PORT_SYM_ERROR); + p->rx_runt = GET_STAT(RX_PORT_LESS_64B); + p->rx_frames_64 = GET_STAT(RX_PORT_64B); + p->rx_frames_65_127 = GET_STAT(RX_PORT_65B_127B); + p->rx_frames_128_255 = GET_STAT(RX_PORT_128B_255B); + p->rx_frames_256_511 = GET_STAT(RX_PORT_256B_511B); + p->rx_frames_512_1023 = GET_STAT(RX_PORT_512B_1023B); + p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B); + p->rx_frames_1519_max = GET_STAT(RX_PORT_1519B_MAX); + p->rx_pause = GET_STAT(RX_PORT_PAUSE); + p->rx_ppp0 = GET_STAT(RX_PORT_PPP0); + p->rx_ppp1 = GET_STAT(RX_PORT_PPP1); + p->rx_ppp2 = GET_STAT(RX_PORT_PPP2); + p->rx_ppp3 = GET_STAT(RX_PORT_PPP3); + p->rx_ppp4 = GET_STAT(RX_PORT_PPP4); + p->rx_ppp5 = GET_STAT(RX_PORT_PPP5); + p->rx_ppp6 = GET_STAT(RX_PORT_PPP6); + p->rx_ppp7 = GET_STAT(RX_PORT_PPP7); + + p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0; + p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0; + p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0; + p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0; + p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0; + p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0; + p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0; + p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0; + +#undef GET_STAT +#undef GET_STAT_COM +} + +/** + * t4_get_lb_stats - collect loopback port statistics + * @adap: the adapter + * @idx: the loopback port index + * @p: the stats structure to fill + * + * Return HW statistics for the given loopback port. + */ +void t4_get_lb_stats(struct adapter *adap, int idx, struct lb_port_stats *p) +{ + u32 bgmap = get_mps_bg_map(adap, idx); + +#define GET_STAT(name) \ + t4_read_reg64(adap, PORT_REG(idx, A_MPS_PORT_STAT_LB_PORT_##name##_L)) +#define GET_STAT_COM(name) t4_read_reg64(adap, A_MPS_STAT_##name##_L) + + p->octets = GET_STAT(BYTES); + p->frames = GET_STAT(FRAMES); + p->bcast_frames = GET_STAT(BCAST); + p->mcast_frames = GET_STAT(MCAST); + p->ucast_frames = GET_STAT(UCAST); + p->error_frames = GET_STAT(ERROR); + + p->frames_64 = GET_STAT(64B); + p->frames_65_127 = GET_STAT(65B_127B); + p->frames_128_255 = GET_STAT(128B_255B); + p->frames_256_511 = GET_STAT(256B_511B); + p->frames_512_1023 = GET_STAT(512B_1023B); + p->frames_1024_1518 = GET_STAT(1024B_1518B); + p->frames_1519_max = GET_STAT(1519B_MAX); + p->drop = t4_read_reg(adap, PORT_REG(idx, + A_MPS_PORT_STAT_LB_PORT_DROP_FRAMES)); + + p->ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_DROP_FRAME) : 0; + p->ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_DROP_FRAME) : 0; + p->ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_DROP_FRAME) : 0; + p->ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_DROP_FRAME) : 0; + p->trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_TRUNC_FRAME) : 0; + p->trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_TRUNC_FRAME) : 0; + p->trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_TRUNC_FRAME) : 0; + p->trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_TRUNC_FRAME) : 0; + +#undef GET_STAT +#undef GET_STAT_COM +} + +/** + * t4_wol_magic_enable - enable/disable magic packet WoL + * @adap: the adapter + * @port: the physical port index + * @addr: MAC address expected in magic packets, %NULL to disable + * + * Enables/disables magic packet wake-on-LAN for the selected port. + */ +void t4_wol_magic_enable(struct adapter *adap, unsigned int port, + const u8 *addr) +{ + if (addr) { + t4_write_reg(adap, PORT_REG(port, A_XGMAC_PORT_MAGIC_MACID_LO), + (addr[2] << 24) | (addr[3] << 16) | + (addr[4] << 8) | addr[5]); + t4_write_reg(adap, PORT_REG(port, A_XGMAC_PORT_MAGIC_MACID_HI), + (addr[0] << 8) | addr[1]); + } + t4_set_reg_field(adap, PORT_REG(port, A_XGMAC_PORT_CFG2), F_MAGICEN, + V_MAGICEN(addr != NULL)); +} + +/** + * t4_wol_pat_enable - enable/disable pattern-based WoL + * @adap: the adapter + * @port: the physical port index + * @map: bitmap of which HW pattern filters to set + * @mask0: byte mask for bytes 0-63 of a packet + * @mask1: byte mask for bytes 64-127 of a packet + * @crc: Ethernet CRC for selected bytes + * @enable: enable/disable switch + * + * Sets the pattern filters indicated in @map to mask out the bytes + * specified in @mask0/@mask1 in received packets and compare the CRC of + * the resulting packet against @crc. If @enable is %true pattern-based + * WoL is enabled, otherwise disabled. + */ +int t4_wol_pat_enable(struct adapter *adap, unsigned int port, unsigned int map, + u64 mask0, u64 mask1, unsigned int crc, bool enable) +{ + int i; + + if (!enable) { + t4_set_reg_field(adap, PORT_REG(port, A_XGMAC_PORT_CFG2), + F_PATEN, 0); + return 0; + } + if (map > 0xff) + return -EINVAL; + +#define EPIO_REG(name) PORT_REG(port, A_XGMAC_PORT_EPIO_##name) + + t4_write_reg(adap, EPIO_REG(DATA1), mask0 >> 32); + t4_write_reg(adap, EPIO_REG(DATA2), mask1); + t4_write_reg(adap, EPIO_REG(DATA3), mask1 >> 32); + + for (i = 0; i < NWOL_PAT; i++, map >>= 1) { + if (!(map & 1)) + continue; + + /* write byte masks */ + t4_write_reg(adap, EPIO_REG(DATA0), mask0); + t4_write_reg(adap, EPIO_REG(OP), V_ADDRESS(i) | F_EPIOWR); + t4_read_reg(adap, EPIO_REG(OP)); /* flush */ + if (t4_read_reg(adap, EPIO_REG(OP)) & F_BUSY) + return -ETIMEDOUT; + + /* write CRC */ + t4_write_reg(adap, EPIO_REG(DATA0), crc); + t4_write_reg(adap, EPIO_REG(OP), V_ADDRESS(i + 32) | F_EPIOWR); + t4_read_reg(adap, EPIO_REG(OP)); /* flush */ + if (t4_read_reg(adap, EPIO_REG(OP)) & F_BUSY) + return -ETIMEDOUT; + } +#undef EPIO_REG + + t4_set_reg_field(adap, PORT_REG(port, A_XGMAC_PORT_CFG2), 0, F_PATEN); + return 0; +} + +#define INIT_CMD(var, cmd, rd_wr) \ + (var).op_to_write = htonl(V_FW_CMD_OP(FW_##cmd##_CMD) | \ + F_FW_CMD_REQUEST | F_FW_CMD_##rd_wr); \ + (var).retval_len16 = htonl(FW_LEN16(var)) + +/** + * t4_mdio_rd - read a PHY register through MDIO + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @phy_addr: the PHY address + * @mmd: the PHY MMD to access (0 for clause 22 PHYs) + * @reg: the register to read + * @valp: where to store the value + * + * Issues a FW command through the given mailbox to read a PHY register. + */ +int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, + unsigned int mmd, unsigned int reg, u16 *valp) +{ + int ret; + struct fw_ldst_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_addrspace = htonl(V_FW_CMD_OP(FW_LDST_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_READ | V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO)); + c.cycles_to_len16 = htonl(FW_LEN16(c)); + c.u.mdio.paddr_mmd = htons(V_FW_LDST_CMD_PADDR(phy_addr) | + V_FW_LDST_CMD_MMD(mmd)); + c.u.mdio.raddr = htons(reg); + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0) + *valp = ntohs(c.u.mdio.rval); + return ret; +} + +/** + * t4_mdio_wr - write a PHY register through MDIO + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @phy_addr: the PHY address + * @mmd: the PHY MMD to access (0 for clause 22 PHYs) + * @reg: the register to write + * @valp: value to write + * + * Issues a FW command through the given mailbox to write a PHY register. + */ +int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr, + unsigned int mmd, unsigned int reg, u16 val) +{ + struct fw_ldst_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_addrspace = htonl(V_FW_CMD_OP(FW_LDST_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | V_FW_LDST_CMD_ADDRSPACE(FW_LDST_ADDRSPC_MDIO)); + c.cycles_to_len16 = htonl(FW_LEN16(c)); + c.u.mdio.paddr_mmd = htons(V_FW_LDST_CMD_PADDR(phy_addr) | + V_FW_LDST_CMD_MMD(mmd)); + c.u.mdio.raddr = htons(reg); + c.u.mdio.rval = htons(val); + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_fw_hello - establish communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @evt_mbox: mailbox to receive async FW events + * @master: specifies the caller's willingness to be the device master + * @state: returns the current device state + * + * Issues a command to establish communication with FW. + */ +int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox, + enum dev_master master, enum dev_state *state) +{ + int ret; + struct fw_hello_cmd c; + + INIT_CMD(c, HELLO, WRITE); + c.err_to_mbasyncnot = htonl( + V_FW_HELLO_CMD_MASTERDIS(master == MASTER_CANT) | + V_FW_HELLO_CMD_MASTERFORCE(master == MASTER_MUST) | + V_FW_HELLO_CMD_MBMASTER(master == MASTER_MUST ? mbox : 0xff) | + V_FW_HELLO_CMD_MBASYNCNOT(evt_mbox)); + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0 && state) { + u32 v = ntohl(c.err_to_mbasyncnot); + if (v & F_FW_HELLO_CMD_INIT) + *state = DEV_STATE_INIT; + else if (v & F_FW_HELLO_CMD_ERR) + *state = DEV_STATE_ERR; + else + *state = DEV_STATE_UNINIT; + } + return ret; +} + +/** + * t4_fw_bye - end communication with FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to terminate communication with FW. + */ +int t4_fw_bye(struct adapter *adap, unsigned int mbox) +{ + struct fw_bye_cmd c; + + INIT_CMD(c, BYE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_init_cmd - ask FW to initialize the device + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * + * Issues a command to FW to partially initialize the device. This + * performs initialization that generally doesn't depend on user input. + */ +int t4_early_init(struct adapter *adap, unsigned int mbox) +{ + struct fw_initialize_cmd c; + + INIT_CMD(c, INITIALIZE, WRITE); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_fw_reset - issue a reset to FW + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @reset: specifies the type of reset to perform + * + * Issues a reset command of the specified type to FW. + */ +int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset) +{ + struct fw_reset_cmd c; + + INIT_CMD(c, RESET, WRITE); + c.val = htonl(reset); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_query_params - query FW or device parameters + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @nparams: the number of parameters + * @params: the parameter names + * @val: the parameter values + * + * Reads the value of FW or device parameters. Up to 7 parameters can be + * queried at once. + */ +int t4_query_params(struct adapter *adap, unsigned int mbox, + unsigned int nparams, const u32 *params, u32 *val) +{ + int i, ret; + struct fw_params_cmd c; + __be32 *p = &c.param[0].mnem; + + if (nparams > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, PARAMS, READ); + for (i = 0; i < nparams; i++, p += 2) + *p = htonl(*params++); + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0) + for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2) + *val++ = ntohl(*p); + return ret; +} + +/** + * t4_set_params - sets FW or device parameters + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @nparams: the number of parameters + * @params: the parameter names + * @val: the parameter values + * + * Sets the value of FW or device parameters. Up to 7 parameters can be + * specified at once. + */ +int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int nparams, + const u32 *params, const u32 *val) +{ + struct fw_params_cmd c; + __be32 *p = &c.param[0].mnem; + + if (nparams > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + INIT_CMD(c, PARAMS, WRITE); + while (nparams--) { + *p++ = htonl(*params++); + *p++ = htonl(*val++); + } + + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_cfg_pfvf - configure PF/VF resource limits + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF being configured + * @vf: the VF being configured + * @txq: the max number of egress queues + * @txq_eth_ctrl: the max number of egress Ethernet or control queues + * @rxqi: the max number of interrupt-capable ingress queues + * @rxq: the max number of interruptless ingress queues + * @tc: the PCI traffic class + * @vi: the max number of virtual interfaces + * @cmask: the channel access rights mask for the PF/VF + * @pmask: the port access rights mask for the PF/VF + * @nexact: the maximum number of exact MPS filters + * @rcaps: read capabilities + * @wxcaps: write/execute capabilities + * + * Configures resource limits and capabilities for a physical or virtual + * function. + */ +int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl, + unsigned int rxqi, unsigned int rxq, unsigned int tc, + unsigned int vi, unsigned int cmask, unsigned int pmask, + unsigned int nexact, unsigned int rcaps, unsigned int wxcaps) +{ + struct fw_pfvf_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(V_FW_CMD_OP(FW_PFVF_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | V_FW_PFVF_CMD_PFN(pf) | + V_FW_PFVF_CMD_VFN(vf)); + c.retval_len16 = htonl(FW_LEN16(c)); + c.niqflint_niq = htonl(V_FW_PFVF_CMD_NIQFLINT(rxqi) | + V_FW_PFVF_CMD_NIQ(rxq)); + c.cmask_to_neq = htonl(V_FW_PFVF_CMD_CMASK(cmask) | + V_FW_PFVF_CMD_PMASK(pmask) | + V_FW_PFVF_CMD_NEQ(txq)); + c.tc_to_nexactf = htonl(V_FW_PFVF_CMD_TC(tc) | V_FW_PFVF_CMD_NVI(vi) | + V_FW_PFVF_CMD_NEXACTF(nexact)); + c.r_caps_to_nethctrl = htonl(V_FW_PFVF_CMD_R_CAPS(rcaps) | + V_FW_PFVF_CMD_WX_CAPS(wxcaps) | + V_FW_PFVF_CMD_NETHCTRL(txq_eth_ctrl)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_alloc_vi - allocate a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @port: physical port associated with the VI + * @pf: the PF owning the VI + * @vf: the VF owning the VI + * @nmac: number of MAC addresses needed (1 to 5) + * @mac: the MAC addresses of the VI + * @rss_size: size of RSS table slice associated with this VI + * + * Allocates a virtual interface for the given physical port. If @mac is + * not %NULL it contains the MAC addresses of the VI as assigned by FW. + * @mac should be large enough to hold @nmac Ethernet addresses, they are + * stored consecutively so the space needed is @nmac * 6 bytes. + * Returns a negative error number or the non-negative VI id. + */ +int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port, + unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac, + unsigned int *rss_size) +{ + int ret; + struct fw_vi_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | F_FW_CMD_EXEC | + V_FW_VI_CMD_PFN(pf) | V_FW_VI_CMD_VFN(vf)); + c.alloc_to_len16 = htonl(F_FW_VI_CMD_ALLOC | FW_LEN16(c)); + c.portid_pkd = V_FW_VI_CMD_PORTID(port); + c.nmac = nmac - 1; + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret) + return ret; + + if (mac) { + memcpy(mac, c.mac, sizeof(c.mac)); + switch (nmac) { + case 5: + memcpy(mac + 24, c.nmac3, sizeof(c.nmac3)); + case 4: + memcpy(mac + 18, c.nmac2, sizeof(c.nmac2)); + case 3: + memcpy(mac + 12, c.nmac1, sizeof(c.nmac1)); + case 2: + memcpy(mac + 6, c.nmac0, sizeof(c.nmac0)); + } + } + if (rss_size) + *rss_size = G_FW_VI_CMD_RSSSIZE(ntohs(c.rsssize_pkd)); + return ntohs(c.viid_pkd); +} + +/** + * t4_free_vi - free a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the VI + * @vf: the VF owning the VI + * @viid: virtual interface identifiler + * + * Free a previously allocated virtual interface. + */ +int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int viid) +{ + struct fw_vi_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(V_FW_CMD_OP(FW_VI_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_VI_CMD_PFN(pf) | + V_FW_VI_CMD_VFN(vf)); + c.alloc_to_len16 = htonl(F_FW_VI_CMD_FREE | FW_LEN16(c)); + c.viid_pkd = htons(V_FW_VI_CMD_VIID(viid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); +} + +/** + * t4_set_rxmode - set Rx properties of a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @mtu: the new MTU or -1 + * @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change + * @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change + * @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change + * @sleep_ok: if true we may sleep while awaiting command completion + * + * Sets Rx properties of a virtual interface. + */ +int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid, + int mtu, int promisc, int all_multi, int bcast, bool sleep_ok) +{ + struct fw_vi_rxmode_cmd c; + + /* convert to FW values */ + if (mtu < 0) + mtu = M_FW_VI_RXMODE_CMD_MTU; + if (promisc < 0) + promisc = M_FW_VI_RXMODE_CMD_PROMISCEN; + if (all_multi < 0) + all_multi = M_FW_VI_RXMODE_CMD_ALLMULTIEN; + if (bcast < 0) + bcast = M_FW_VI_RXMODE_CMD_BROADCASTEN; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(V_FW_CMD_OP(FW_VI_RXMODE_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | V_FW_VI_RXMODE_CMD_VIID(viid)); + c.retval_len16 = htonl(FW_LEN16(c)); + c.mtu_to_broadcasten = htonl(V_FW_VI_RXMODE_CMD_MTU(mtu) | + V_FW_VI_RXMODE_CMD_PROMISCEN(promisc) | + V_FW_VI_RXMODE_CMD_ALLMULTIEN(all_multi) | + V_FW_VI_RXMODE_CMD_BROADCASTEN(bcast)); + return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); +} + +/** + * t4_alloc_mac_filt - allocates exact-match filters for MAC addresses + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @free: if true any existing filters for this VI id are first removed + * @naddr: the number of MAC addresses to allocate filters for (up to 7) + * @addr: the MAC address(es) + * @idx: where to store the index of each allocated filter + * @hash: pointer to hash address filter bitmap + * @sleep_ok: call is allowed to sleep + * + * Allocates an exact-match filter for each of the supplied addresses and + * sets it to the corresponding address. If @idx is not %NULL it should + * have at least @naddr entries, each of which will be set to the index of + * the filter allocated for the corresponding MAC address. If a filter + * could not be allocated for an address its index is set to 0xffff. + * If @hash is not %NULL addresses that fail to allocate an exact filter + * are hashed and update the hash filter bitmap pointed at by @hash. + * + * Returns a negative error number or the number of filters allocated. + */ +int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox, + unsigned int viid, bool free, unsigned int naddr, + const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok) +{ + int i, ret; + struct fw_vi_mac_cmd c; + struct fw_vi_mac_exact *p; + + if (naddr > 7) + return -EINVAL; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(V_FW_CMD_OP(FW_VI_MAC_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | V_FW_CMD_EXEC(free) | + V_FW_VI_MAC_CMD_VIID(viid)); + c.freemacs_to_len16 = htonl(V_FW_VI_MAC_CMD_FREEMACS(free) | + V_FW_CMD_LEN16((naddr + 2) / 2)); + + for (i = 0, p = c.u.exact; i < naddr; i++, p++) { + p->valid_to_idx = htons(F_FW_VI_MAC_CMD_VALID | + V_FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC)); + memcpy(p->macaddr, addr[i], sizeof(p->macaddr)); + } + + ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok); + if (ret) + return ret; + + for (i = 0, p = c.u.exact; i < naddr; i++, p++) { + u16 index = G_FW_VI_MAC_CMD_IDX(ntohs(p->valid_to_idx)); + + if (idx) + idx[i] = index >= NEXACT_MAC ? 0xffff : index; + if (index < NEXACT_MAC) + ret++; + else if (hash) + *hash |= (1 << hash_mac_addr(addr[i])); + } + return ret; +} + +/** + * t4_change_mac - modifies the exact-match filter for a MAC address + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @idx: index of existing filter for old value of MAC address, or -1 + * @addr: the new MAC address value + * @persist: whether a new MAC allocation should be persistent + * + * Modifies an exact-match filter and sets it to the new MAC address. + * Note that in general it is not possible to modify the value of a given + * filter so the generic way to modify an address filter is to free the one + * being used by the old address value and allocate a new filter for the + * new address value. @idx can be -1 if the address is a new addition. + * + * Returns a negative error number or the index of the filter with the new + * MAC value. + */ +int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid, + int idx, const u8 *addr, bool persist) +{ + int ret; + struct fw_vi_mac_cmd c; + struct fw_vi_mac_exact *p = c.u.exact; + + if (idx < 0) /* new allocation */ + idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(V_FW_CMD_OP(FW_VI_MAC_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | V_FW_VI_MAC_CMD_VIID(viid)); + c.freemacs_to_len16 = htonl(V_FW_CMD_LEN16(1)); + p->valid_to_idx = htons(F_FW_VI_MAC_CMD_VALID | + V_FW_VI_MAC_CMD_IDX(idx)); + memcpy(p->macaddr, addr, sizeof(p->macaddr)); + + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret == 0) { + ret = G_FW_VI_MAC_CMD_IDX(ntohs(p->valid_to_idx)); + if (ret >= NEXACT_MAC) + ret = -ENOMEM; + } + return ret; +} + +/** + * t4_set_addr_hash - program the MAC inexact-match hash filter + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @ucast: whether the hash filter should also match unicast addresses + * @vec: the value to be written to the hash filter + * @sleep_ok: call is allowed to sleep + * + * Sets the 64-bit inexact-match hash filter for a virtual interface. + */ +int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid, + bool ucast, u64 vec, bool sleep_ok) +{ + struct fw_vi_mac_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(V_FW_CMD_OP(FW_VI_MAC_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_WRITE | V_FW_VI_ENABLE_CMD_VIID(viid)); + c.freemacs_to_len16 = htonl(F_FW_VI_MAC_CMD_HASHVECEN | + V_FW_VI_MAC_CMD_HASHUNIEN(ucast) | + V_FW_CMD_LEN16(1)); + c.u.hash.hashvec = cpu_to_be64(vec); + return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok); +} + +/** + * t4_enable_vi - enable/disable a virtual interface + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @rx_en: 1=enable Rx, 0=disable Rx + * @tx_en: 1=enable Tx, 0=disable Tx + * + * Enables/disables a virtual interface. + */ +int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid, + bool rx_en, bool tx_en) +{ + struct fw_vi_enable_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_viid = htonl(V_FW_CMD_OP(FW_VI_ENABLE_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_VI_ENABLE_CMD_VIID(viid)); + c.ien_to_len16 = htonl(V_FW_VI_ENABLE_CMD_IEN(rx_en) | + V_FW_VI_ENABLE_CMD_EEN(tx_en) | FW_LEN16(c)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_identify_port - identify a VI's port by blinking its LED + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @viid: the VI id + * @nblinks: how many times to blink LED at 2.5 Hz + * + * Identifies a VI's port by blinking its LED. + */ +int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid, + unsigned int nblinks) +{ + struct fw_vi_enable_cmd c; + + c.op_to_viid = htonl(V_FW_CMD_OP(FW_VI_ENABLE_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_VI_ENABLE_CMD_VIID(viid)); + c.ien_to_len16 = htonl(F_FW_VI_ENABLE_CMD_LED | FW_LEN16(c)); + c.blinkdur = htons(nblinks); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_iq_start_stop - enable/disable an ingress queue and its FLs + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @start: %true to enable the queues, %false to disable them + * @pf: the PF owning the queues + * @vf: the VF owning the queues + * @iqid: ingress queue id + * @fl0id: FL0 queue id or 0xffff if no attached FL0 + * @fl1id: FL1 queue id or 0xffff if no attached FL1 + * + * Starts or stops an ingress queue and its associated FLs, if any. + */ +int t4_iq_start_stop(struct adapter *adap, unsigned int mbox, bool start, + unsigned int pf, unsigned int vf, unsigned int iqid, + unsigned int fl0id, unsigned int fl1id) +{ + struct fw_iq_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) | + V_FW_IQ_CMD_VFN(vf)); + c.alloc_to_len16 = htonl(V_FW_IQ_CMD_IQSTART(start) | + V_FW_IQ_CMD_IQSTOP(!start) | FW_LEN16(c)); + c.iqid = htons(iqid); + c.fl0id = htons(fl0id); + c.fl1id = htons(fl1id); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_iq_free - free an ingress queue and its FLs + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queues + * @vf: the VF owning the queues + * @iqtype: the ingress queue type + * @iqid: ingress queue id + * @fl0id: FL0 queue id or 0xffff if no attached FL0 + * @fl1id: FL1 queue id or 0xffff if no attached FL1 + * + * Frees an ingress queue and its associated FLs, if any. + */ +int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int iqtype, unsigned int iqid, + unsigned int fl0id, unsigned int fl1id) +{ + struct fw_iq_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(pf) | + V_FW_IQ_CMD_VFN(vf)); + c.alloc_to_len16 = htonl(F_FW_IQ_CMD_FREE | FW_LEN16(c)); + c.type_to_iqandstindex = htonl(V_FW_IQ_CMD_TYPE(iqtype)); + c.iqid = htons(iqid); + c.fl0id = htons(fl0id); + c.fl1id = htons(fl1id); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_eth_eq_free - free an Ethernet egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees an Ethernet egress queue. + */ +int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_eth_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(V_FW_CMD_OP(FW_EQ_ETH_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_EQ_ETH_CMD_PFN(pf) | + V_FW_EQ_ETH_CMD_VFN(vf)); + c.alloc_to_len16 = htonl(F_FW_EQ_ETH_CMD_FREE | FW_LEN16(c)); + c.eqid_pkd = htonl(V_FW_EQ_ETH_CMD_EQID(eqid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_ctrl_eq_free - free a control egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees a control egress queue. + */ +int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_ctrl_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(V_FW_CMD_OP(FW_EQ_CTRL_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_EQ_CTRL_CMD_PFN(pf) | + V_FW_EQ_CTRL_CMD_VFN(vf)); + c.alloc_to_len16 = htonl(F_FW_EQ_CTRL_CMD_FREE | FW_LEN16(c)); + c.cmpliqid_eqid = htonl(V_FW_EQ_CTRL_CMD_EQID(eqid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_ofld_eq_free - free an offload egress queue + * @adap: the adapter + * @mbox: mailbox to use for the FW command + * @pf: the PF owning the queue + * @vf: the VF owning the queue + * @eqid: egress queue id + * + * Frees a control egress queue. + */ +int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf, + unsigned int vf, unsigned int eqid) +{ + struct fw_eq_ofld_cmd c; + + memset(&c, 0, sizeof(c)); + c.op_to_vfn = htonl(V_FW_CMD_OP(FW_EQ_OFLD_CMD) | F_FW_CMD_REQUEST | + F_FW_CMD_EXEC | V_FW_EQ_OFLD_CMD_PFN(pf) | + V_FW_EQ_OFLD_CMD_VFN(vf)); + c.alloc_to_len16 = htonl(F_FW_EQ_OFLD_CMD_FREE | FW_LEN16(c)); + c.eqid_pkd = htonl(V_FW_EQ_OFLD_CMD_EQID(eqid)); + return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL); +} + +/** + * t4_handle_fw_rpl - process a FW reply message + * @adap: the adapter + * @rpl: start of the FW message + * + * Processes a FW message, such as link state change messages. + */ +int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl) +{ + u8 opcode = *(const u8 *)rpl; + + if (opcode == FW_PORT_CMD) { /* link/module state change message */ + int speed = 0, fc = 0; + const struct fw_port_cmd *p = (void *)rpl; + int chan = G_FW_PORT_CMD_PORTID(ntohl(p->op_to_portid)); + int port = adap->chan_map[chan]; + struct port_info *pi = adap2pinfo(adap, port); + struct link_config *lc = &pi->link_cfg; + u32 stat = ntohl(p->u.info.lstatus_to_modtype); + int link_ok = (stat & F_FW_PORT_CMD_LSTATUS) != 0; + u32 mod = G_FW_PORT_CMD_MODTYPE(stat); + + if (stat & F_FW_PORT_CMD_RXPAUSE) + fc |= PAUSE_RX; + if (stat & F_FW_PORT_CMD_TXPAUSE) + fc |= PAUSE_TX; + if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_100M)) + speed = SPEED_100; + else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_1G)) + speed = SPEED_1000; + else if (stat & V_FW_PORT_CMD_LSPEED(FW_PORT_CAP_SPEED_10G)) + speed = SPEED_10000; + + if (link_ok != lc->link_ok || speed != lc->speed || + fc != lc->fc) { /* something changed */ + lc->link_ok = link_ok; + lc->speed = speed; + lc->fc = fc; + t4_os_link_changed(adap, port, link_ok); + } + if (mod != pi->mod_type) { + pi->mod_type = mod; + t4_os_portmod_changed(adap, port); + } + } + return 0; +} + +/** + * get_pci_mode - determine a card's PCI mode + * @adapter: the adapter + * @p: where to store the PCI settings + * + * Determines a card's PCI mode and associated parameters, such as speed + * and width. + */ +static void __devinit get_pci_mode(struct adapter *adapter, + struct pci_params *p) +{ + u16 val; + u32 pcie_cap; + + pcie_cap = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (pcie_cap) { + pci_read_config_word(adapter->pdev, pcie_cap + PCI_EXP_LNKSTA, + &val); + p->speed = val & PCI_EXP_LNKSTA_CLS; + p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4; + } +} + +/** + * init_link_config - initialize a link's SW state + * @lc: structure holding the link state + * @caps: link capabilities + * + * Initializes the SW state maintained for each link, including the link's + * capabilities and default speed/flow-control/autonegotiation settings. + */ +static void __devinit init_link_config(struct link_config *lc, + unsigned int caps) +{ + lc->supported = caps; + lc->requested_speed = 0; + lc->speed = 0; + lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX; + if (lc->supported & FW_PORT_CAP_ANEG) { + lc->advertising = lc->supported & ADVERT_MASK; + lc->autoneg = AUTONEG_ENABLE; + lc->requested_fc |= PAUSE_AUTONEG; + } else { + lc->advertising = 0; + lc->autoneg = AUTONEG_DISABLE; + } +} + +static int __devinit wait_dev_ready(struct adapter *adap) +{ + if (t4_read_reg(adap, A_PL_WHOAMI) != 0xffffffff) + return 0; + msleep(500); + return t4_read_reg(adap, A_PL_WHOAMI) != 0xffffffff ? 0 : -EIO; +} + +/** + * t4_prep_adapter - prepare SW and HW for operation + * @adapter: the adapter + * @reset: if true perform a HW reset + * + * Initialize adapter SW state for the various HW modules, set initial + * values for some adapter tunables, take PHYs out of reset, and + * initialize the MDIO interface. + */ +int __devinit t4_prep_adapter(struct adapter *adapter) +{ + int ret; + + ret = wait_dev_ready(adapter); + if (ret < 0) + return ret; + + get_pci_mode(adapter, &adapter->params.pci); + adapter->params.rev = t4_read_reg(adapter, A_PL_REV); + + ret = get_vpd_params(adapter, &adapter->params.vpd); + if (ret < 0) + return ret; + + init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd); + + /* + * Default port for debugging in case we can't reach FW. + */ + adapter->params.nports = 1; + adapter->params.portvec = 1; + return 0; +} + +int __devinit t4_port_init(struct adapter *adap, int mbox, int pf, int vf) +{ + u8 addr[6]; + int ret, i, j = 0; + struct fw_port_cmd c; + + memset(&c, 0, sizeof(c)); + + for_each_port(adap, i) { + unsigned int rss_size; + struct port_info *p = adap2pinfo(adap, i); + + while ((adap->params.portvec & (1 << j)) == 0) + j++; + + c.op_to_portid = htonl(V_FW_CMD_OP(FW_PORT_CMD) | + F_FW_CMD_REQUEST | F_FW_CMD_READ | + V_FW_PORT_CMD_PORTID(j)); + c.action_to_len16 = htonl( + V_FW_PORT_CMD_ACTION(FW_PORT_ACTION_GET_PORT_INFO) | + FW_LEN16(c)); + ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c); + if (ret) + return ret; + + ret = t4_alloc_vi(adap, mbox, j, pf, vf, 1, addr, &rss_size); + if (ret < 0) + return ret; + + p->viid = ret; + p->tx_chan = j; + p->lport = j; + p->rss_size = rss_size; + memcpy(adap->port[i]->dev_addr, addr, ETH_ALEN); + memcpy(adap->port[i]->perm_addr, addr, ETH_ALEN); + + ret = ntohl(c.u.info.lstatus_to_modtype); + p->mdio_addr = (ret & F_FW_PORT_CMD_MDIOCAP) ? + G_FW_PORT_CMD_MDIOADDR(ret) : -1; + p->port_type = G_FW_PORT_CMD_PTYPE(ret); + p->mod_type = G_FW_PORT_CMD_MODTYPE(ret); + + init_link_config(&p->link_cfg, ntohs(c.u.info.pcap)); + j++; + } + return 0; +} diff --git a/drivers/net/cxgb4/t4_hw.h b/drivers/net/cxgb4/t4_hw.h new file mode 100644 index 0000000..a11d3c0 --- /dev/null +++ b/drivers/net/cxgb4/t4_hw.h @@ -0,0 +1,128 @@ +/* + * This file is part of the Chelsio T4 Ethernet driver for Linux. + * + * Copyright (c) 2003-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef __T4_HW_H +#define __T4_HW_H + +#include + +enum { + NCHAN = 4, /* # of HW channels */ + MAX_MTU = 9600, /* max MAC MTU, excluding header + FCS */ + EEPROMSIZE = 17408, /* Serial EEPROM physical size */ + EEPROMVSIZE = 32768, /* Serial EEPROM virtual address space size */ + RSS_NENTRIES = 2048, /* # of entries in RSS mapping table */ + TCB_SIZE = 128, /* TCB size */ + NMTUS = 16, /* size of MTU table */ + NCCTRL_WIN = 32, /* # of congestion control windows */ + NEXACT_MAC = 336, /* # of exact MAC address filters */ + L2T_SIZE = 4096, /* # of L2T entries */ + MBOX_LEN = 64, /* mailbox size in bytes */ + TRACE_LEN = 112, /* length of trace data and mask */ + FILTER_OPT_LEN = 36, /* filter tuple width for optional components */ + NWOL_PAT = 8, /* # of WoL patterns */ + WOL_PAT_LEN = 128, /* length of WoL patterns */ +}; + +enum { + SF_PAGE_SIZE = 256, /* serial flash page size */ + SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */ + SF_SIZE = SF_SEC_SIZE * 16, /* serial flash size */ +}; + +enum { RSP_TYPE_FLBUF, RSP_TYPE_CPL, RSP_TYPE_INTR }; /* response entry types */ + +enum { MBOX_OWNER_NONE, MBOX_OWNER_FW, MBOX_OWNER_DRV }; /* mailbox owners */ + +enum { + SGE_MAX_WR_LEN = 512, /* max WR size in bytes */ + SGE_NTIMERS = 6, /* # of interrupt holdoff timer values */ + SGE_NCOUNTERS = 4, /* # of interrupt packet counter values */ +}; + +struct sge_qstat { /* data written to SGE queue status entries */ + __be32 qid; + __be16 cidx; + __be16 pidx; +}; + +#define S_QSTAT_PIDX 0 +#define M_QSTAT_PIDX 0xffff +#define G_QSTAT_PIDX(x) (((x) >> S_QSTAT_PIDX) & M_QSTAT_PIDX) + +#define S_QSTAT_CIDX 16 +#define M_QSTAT_CIDX 0xffff +#define G_QSTAT_CIDX(x) (((x) >> S_QSTAT_CIDX) & M_QSTAT_CIDX) + +/* + * Structure for last 128 bits of response descriptors + */ +struct rsp_ctrl { + __be32 hdrbuflen_pidx; + __be32 pldbuflen_qid; + union { + u8 type_gen; + __be64 last_flit; + }; +}; + +#define S_RSPD_NEWBUF 31 +#define V_RSPD_NEWBUF(x) ((x) << S_RSPD_NEWBUF) +#define F_RSPD_NEWBUF V_RSPD_NEWBUF(1U) + +#define S_RSPD_LEN 0 +#define M_RSPD_LEN 0x7fffffff +#define V_RSPD_LEN(x) ((x) << S_RSPD_LEN) +#define G_RSPD_LEN(x) (((x) >> S_RSPD_LEN) & M_RSPD_LEN) + +#define S_RSPD_GEN 7 +#define V_RSPD_GEN(x) ((x) << S_RSPD_GEN) +#define F_RSPD_GEN V_RSPD_GEN(1U) + +#define S_RSPD_TYPE 4 +#define M_RSPD_TYPE 0x3 +#define V_RSPD_TYPE(x) ((x) << S_RSPD_TYPE) +#define G_RSPD_TYPE(x) (((x) >> S_RSPD_TYPE) & M_RSPD_TYPE) + +/* Rx queue interrupt deferral fields: counter enable and timer index */ +#define S_QINTR_CNT_EN 0 +#define V_QINTR_CNT_EN(x) ((x) << S_QINTR_CNT_EN) +#define F_QINTR_CNT_EN V_QINTR_CNT_EN(1U) + +#define S_QINTR_TIMER_IDX 1 +#define M_QINTR_TIMER_IDX 0x7 +#define V_QINTR_TIMER_IDX(x) ((x) << S_QINTR_TIMER_IDX) +#define G_QINTR_TIMER_IDX(x) (((x) >> S_QINTR_TIMER_IDX) & M_QINTR_TIMER_IDX) + +#endif /* __T4_HW_H */