diff mbox

[net-next,08/10] tg3: Turn off the debug UART for 57765

Message ID 1264042691-28284-9-git-send-email-mcarlson@broadcom.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Matt Carlson Jan. 21, 2010, 2:58 a.m. UTC 
If the debug UART is left enabled, the LEDs will not work properly.
This patch disables the debug UART.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
---
 drivers/net/tg3.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index dffa51a..075d21a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -13328,7 +13328,8 @@  static int __devinit tg3_get_invariants(struct tg3 *tp)
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE3;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765)
 		tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
 
 	if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761 ||