@@ -293,6 +293,124 @@ static int smsc9420_ethtool_nway_reset(struct net_device *netdev)
return phy_start_aneg(pd->phy_dev);
}
+static void smsc9420_eeprom_enable_access(struct smsc9420_pdata *pd)
+{
+ unsigned int temp = smsc9420_reg_read(pd, GPIO_CFG);
+ temp &= ~GPIO_CFG_EEPR_EN_;
+ smsc9420_reg_write(pd, GPIO_CFG, temp);
+ msleep(1);
+}
+
+static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op)
+{
+ int timeout = 100;
+ u32 e2cmd;
+
+ smsc_dbg(HW, "op 0x%08x", op);
+ if (smsc9420_reg_read(pd, E2P_CMD) & E2P_CMD_EPC_BUSY_) {
+ smsc_warn(HW, "Busy at start");
+ return -EBUSY;
+ }
+
+ e2cmd = op | E2P_CMD_EPC_BUSY_;
+ smsc9420_reg_write(pd, E2P_CMD, e2cmd);
+
+ do {
+ msleep(1);
+ e2cmd = smsc9420_reg_read(pd, E2P_CMD);
+ } while ((e2cmd & E2P_CMD_EPC_BUSY_) && (timeout--));
+
+ if (!timeout) {
+ smsc_info(HW, "TIMED OUT");
+ return -EAGAIN;
+ }
+
+ if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
+ smsc_info(HW, "Error occured during eeprom operation");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int smsc9420_eeprom_read_location(struct smsc9420_pdata *pd,
+ u8 address, u8 *data)
+{
+ u32 op = E2P_CMD_EPC_CMD_READ_ | address;
+ int ret;
+
+ smsc_dbg(HW, "address 0x%x", address);
+ ret = smsc9420_eeprom_send_cmd(pd, op);
+
+ if (!ret)
+ data[address] = smsc9420_reg_read(pd, E2P_DATA);
+
+ return ret;
+}
+
+static int smsc9420_eeprom_write_location(struct smsc9420_pdata *pd,
+ u8 address, u8 data)
+{
+ u32 op = E2P_CMD_EPC_CMD_ERASE_ | address;
+ int ret;
+
+ smsc_dbg(HW, "address 0x%x, data 0x%x", address, data);
+ ret = smsc9420_eeprom_send_cmd(pd, op);
+
+ if (!ret) {
+ op = E2P_CMD_EPC_CMD_WRITE_ | address;
+ smsc9420_reg_write(pd, E2P_DATA, (u32)data);
+ ret = smsc9420_eeprom_send_cmd(pd, op);
+ }
+
+ return ret;
+}
+
+static int smsc9420_ethtool_get_eeprom_len(struct net_device *dev)
+{
+ return SMSC9420_EEPROM_SIZE;
+}
+
+static int smsc9420_ethtool_get_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct smsc9420_pdata *pd = netdev_priv(dev);
+ u8 eeprom_data[SMSC9420_EEPROM_SIZE];
+ int len, i;
+
+ smsc9420_eeprom_enable_access(pd);
+
+ len = min(eeprom->len, SMSC9420_EEPROM_SIZE);
+ for (i = 0; i < len; i++) {
+ int ret = smsc9420_eeprom_read_location(pd, i, eeprom_data);
+ if (ret < 0) {
+ eeprom->len = 0;
+ return ret;
+ }
+ }
+
+ memcpy(data, &eeprom_data[eeprom->offset], len);
+ eeprom->len = len;
+ return 0;
+}
+
+static int smsc9420_ethtool_set_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct smsc9420_pdata *pd = netdev_priv(dev);
+ int ret;
+
+ smsc9420_eeprom_enable_access(pd);
+ smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWEN_);
+ ret = smsc9420_eeprom_write_location(pd, eeprom->offset, *data);
+ smsc9420_eeprom_send_cmd(pd, E2P_CMD_EPC_CMD_EWDS_);
+
+ /* Single byte write, according to man page */
+ eeprom->len = 1;
+
+ return ret;
+}
+
static const struct ethtool_ops smsc9420_ethtool_ops = {
.get_settings = smsc9420_ethtool_get_settings,
.set_settings = smsc9420_ethtool_set_settings,
@@ -301,6 +419,9 @@ static const struct ethtool_ops smsc9420_ethtool_ops = {
.set_msglevel = smsc9420_ethtool_set_msglevel,
.nway_reset = smsc9420_ethtool_nway_reset,
.get_link = ethtool_op_get_link,
+ .get_eeprom_len = smsc9420_ethtool_get_eeprom_len,
+ .get_eeprom = smsc9420_ethtool_get_eeprom,
+ .set_eeprom = smsc9420_ethtool_set_eeprom,
};
/* Sets the device MAC address to dev_addr */
@@ -43,6 +43,8 @@
#define LAN_REGISTER_EXTENT (0x400)
+#define SMSC9420_EEPROM_SIZE ((u32)11)
+
#define FLOW_CTRL_TX (1)
#define FLOW_CTRL_RX (2)
@@ -238,6 +240,7 @@
#define GPIO_CFG_LED_3_ (0x40000000)
#define GPIO_CFG_LED_2_ (0x20000000)
#define GPIO_CFG_LED_1_ (0x10000000)
+#define GPIO_CFG_EEPR_EN_ (0x00700000)
#define GPT_CFG (0xD4)
#define GPT_CFG_TIMER_EN_ (0x20000000)
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> --- drivers/net/smsc9420.c | 121 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/net/smsc9420.h | 3 + 2 files changed, 124 insertions(+), 0 deletions(-)