diff mbox

[v4,3/5] net: asix: Fix AX88772x resume failures

Message ID 00a601d24ab6$4e9274d0$ebb75e70$@asix.com.tw
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

ASIX_Allan [Office] Nov. 30, 2016, 3:03 a.m. UTC 
The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY

Signed-off-by: Allan Chou <allan@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Allan Chou <allan@asix.com.tw>

---
drivers/net/usb/asix_devices.c | 47
+++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

@@ static int ax88772a_hw_reset(struct usbnet *dev, int in_pm)
 				   ret);
 			goto out;
 		}
+	} else if ((chipcode & AX_CHIPCODE_MASK) == AX_AX88772A_CHIPCODE) {
+		/* Check if the PHY registers have default settings */
+		phy14h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H);
+		phy15h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H);
+		phy16h = asix_mdio_read_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H);
+
+		netdev_dbg(dev->net,
+			   "772a_hw_reset: MR20=0x%x MR21=0x%x MR22=0x%x\n",
+			   phy14h, phy15h, phy16h);
+
+		/* Restore PHY registers default setting if not */
+		if (phy14h != AX88772A_PHY14H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY14H,
+					     AX88772A_PHY14H_DEFAULT);
+		if (phy15h != AX88772A_PHY15H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY15H,
+					     AX88772A_PHY15H_DEFAULT);
+		if (phy16h != AX88772A_PHY16H_DEFAULT)
+			asix_mdio_write_nopm(dev->net, dev->mii.phy_id,
+					     AX88772A_PHY16H,
+					     AX88772A_PHY16H_DEFAULT);
 	}
 
 	ret = asix_write_cmd(dev, AX_CMD_WRITE_IPG0, @@ -543,6 +578,15 @@
static const struct net_device_ops ax88772_netdev_ops = {  static void
ax88772_suspend(struct usbnet *dev)  {
 	struct asix_common_private *priv = dev->driver_priv;
+	u16 medium;
+
+	/* Stop MAC operation */
+	medium = asix_read_medium_status(dev, 1);
+	medium &= ~AX_MEDIUM_RE;
+	asix_write_medium_mode(dev, medium, 1);
+
+	netdev_dbg(dev->net, "ax88772_suspend: medium=0x%04x\n",
+		   asix_read_medium_status(dev, 1));
 
 	/* Preserve BMCR for restoring */
 	priv->presvd_phy_bmcr =
@@ -577,6 +621,7 @@ static void ax88772_restore_phy(struct usbnet *dev)
 		asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
 				     priv->presvd_phy_bmcr);
 
+		mii_nway_restart(&dev->mii);
 		priv->presvd_phy_advertise = 0;
 		priv->presvd_phy_bmcr = 0;
 	}
--
2.7.4

Comments

Jon Hunter Nov. 30, 2016, 8:07 a.m. UTC | #1 
Hi Allan,

On 30/11/16 03:03, ASIX_Allan [Office] wrote:
> The change fixes AX88772x resume failure by
> - Restore incorrect AX88772A PHY registers when resetting
> - Need to stop MAC operation when suspending
> - Need to restart MII when restoring PHY
> 
> Signed-off-by: Allan Chou <allan@asix.com.tw>
> Signed-off-by: Robert Foss <robert.foss@collabora.com>
> Tested-by: Robert Foss <robert.foss@collabora.com>
> Tested-by: Jon Hunter <jonathanh@nvidia.com>
> Tested-by: Allan Chou <allan@asix.com.tw>

V3 of this patch is already in the current mainline branch. So you need
to send a patch on top of V3 (or v4.9-rc7) to get this fixed. Also you
should highlight the fact that this is a fix needed for v4.9.

Cheers
Jon
ASIX_Allan [Office] Nov. 30, 2016, 8:28 a.m. UTC | #2 
Dear Jon,

Thanks a lot for your reminding. I will submit a new driver patch soon.

---
Best regards,
Allan Chou


-----Original Message-----
From: Jon Hunter [mailto:jonathanh@nvidia.com] 
Sent: Wednesday, November 30, 2016 4:08 PM
To: allan@asix.com.tw; freddy@asix.com.tw; Dean_Jenkins@mentor.com;
Mark_Craske@mentor.com; davem@davemloft.net; robert.foss@collabora.com;
ivecera@redhat.com; john.stultz@linaro.org; vpalatin@chromium.org;
stephen@networkplumber.org; grundler@chromium.org; changchias@gmail.com;
andrew@lunn.ch; tremyfr@gmail.com; colin.king@canonical.com;
linux-usb@vger.kernel.org; netdev@vger.kernel.org;
linux-kernel@vger.kernel.org; vpalatin@google.com
Subject: Re: [PATCH v4 3/5] net: asix: Fix AX88772x resume failures

Hi Allan,

On 30/11/16 03:03, ASIX_Allan [Office] wrote:
> The change fixes AX88772x resume failure by
> - Restore incorrect AX88772A PHY registers when resetting
> - Need to stop MAC operation when suspending
> - Need to restart MII when restoring PHY
> 
> Signed-off-by: Allan Chou <allan@asix.com.tw>
> Signed-off-by: Robert Foss <robert.foss@collabora.com>
> Tested-by: Robert Foss <robert.foss@collabora.com>
> Tested-by: Jon Hunter <jonathanh@nvidia.com>
> Tested-by: Allan Chou <allan@asix.com.tw>

V3 of this patch is already in the current mainline branch. So you need to
send a patch on top of V3 (or v4.9-rc7) to get this fixed. Also you should
highlight the fact that this is a fix needed for v4.9.

Cheers
Jon

--
nvpublic
diff mbox

Patch

diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index ebeb730..083dc2e 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -35,6 +35,15 @@ 
 
 #define	PHY_MODE_RTL8211CL	0x000C
 
+#define AX88772A_PHY14H		0x14
+#define AX88772A_PHY14H_DEFAULT 0x442C
+
+#define AX88772A_PHY15H		0x15
+#define AX88772A_PHY15H_DEFAULT 0x03C8
+
+#define AX88772A_PHY16H		0x16
+#define AX88772A_PHY16H_DEFAULT 0x4044
+
 struct ax88172_int_data {
 	__le16 res1;
 	u8 link;
@@ -424,7 +433,7 @@  static int ax88772a_hw_reset(struct usbnet *dev, int
in_pm)  {
 	struct asix_data *data = (struct asix_data *)&dev->data;
 	int ret, embd_phy;
-	u16 rx_ctl;
+	u16 rx_ctl, phy14h, phy15h, phy16h;
 	u8 chipcode = 0;
 
 	ret = asix_write_gpio(dev, AX_GPIO_RSE, 5, in_pm); @@ -482,6 +491,32