| [net-next,4/9] bnx2x: Fix SFP+ current leakage |
2012-11-27 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,07/10] bnx2x: Add support for new PHY BCM84833 |
2011-01-31 |
Yaniv Rosner |
davem |
Accepted |
| [net-2.6,1/2] bnx2x: Fix PHY locking problem |
2010-08-16 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,10/10] bnx2x: Update bnx2x version to 1.62.11-0 |
2011-01-31 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,02/10] bnx2x: Split PHY functions |
2010-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,02/10] bnx2x: Rename CL45 macro |
2011-01-31 |
Yaniv Rosner |
davem |
Accepted |
| [net,3/6] bnx2x: Remove fiber remote fault detection |
2011-09-06 |
Yaniv Rosner |
davem |
Superseded |
| [net-2.6,3/5] bnx2x: Fix port swap for BCM8073 |
2011-01-30 |
Yaniv Rosner |
davem |
Accepted |
| [net,2/3] bnx2x: Fix KR2 link |
2013-02-27 |
Yaniv Rosner |
davem |
Accepted |
| [ethtool] Add command to dump module EEPROM |
2012-05-14 |
Yaniv Rosner |
davem |
Not Applicable |
| [net,v2,3/7] bnx2x: Fix RX/TX problem caused by the MAC layer |
2011-10-27 |
Yaniv Rosner |
davem |
Accepted |
| [net,08/10] bnx2x: Clear BCM84833 LED after fan failure |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net-2.6,1/8] bnx2x: Restore appropriate delay during BMAC reset |
2010-11-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,04/10] bnx2x: Fix BCM578x0-SFI pre-emphasis settings |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net,5/6] bnx2x: Fix 578xx link LED |
2011-09-06 |
Yaniv Rosner |
davem |
Superseded |
| [net,09/10] bnx2x: Fix BCM57711+BCM84823 link issue |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,6/9] bnx2x: Always take PHY lock |
2012-11-27 |
Yaniv Rosner |
davem |
Accepted |
| [net,03/10] bnx2x: Fix BCM57810-KR AN speed transition |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net,1/7] bnx2x: Fix LED blink rate for 578xx |
2011-10-26 |
Yaniv Rosner |
davem |
Changes Requested |
| [net,01/10] bnx2x: PFC fix |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,01/10] bnx2x: Unify PHY attributes |
2010-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net,10/10] bnx2x: Clear MDC/MDIO warning message |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net-next] bnx2x: Add new PHY BCM54616 |
2011-08-23 |
Yaniv Rosner |
davem |
Accepted |
| [net,06/10] bnx2x: Fix link issue for BCM8727 boards. |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net,1/3] bnx2x: Fix port identification for the 84834 |
2013-02-27 |
Yaniv Rosner |
davem |
Accepted |
| [net,07/10] bnx2x: Fix BCM84833 PHY FW version presentation |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,9/9] bnx2x: Change value comparison order |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net,05/10] bnx2x: Restore 1G LED on BCM57712+BCM8727 designs. |
2012-04-04 |
Yaniv Rosner |
davem |
Accepted |
| [net-2.6,6/8] bnx2x: Do not enable CL37 BAM unless it is explicitly enabled |
2010-11-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,3/7] bnx2x: prevent timeouts when using PFC |
2012-09-11 |
Yaniv Rosner |
davem |
Not Applicable |
| [net,v2,3/6] bnx2x: Remove fiber remote fault detection |
2011-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,09/11] bnx2x: Fix link status sync |
2011-06-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,7/9] bnx2x: Cosmetic changes |
2012-11-27 |
Yaniv Rosner |
davem |
Accepted |
| ethtool: Add support for 20G link speed |
2011-06-05 |
Yaniv Rosner |
davem |
Not Applicable |
| [net-next,1/8] bnx2x: PFC changes |
2011-11-27 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-next,10/11] bnx2x: Modify XGXS functions |
2011-06-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,05/10] bnx2x: Move common function into aggregated function |
2010-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,08/11] bnx2x: Adjust BCM8726 module detection settings |
2011-06-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,v2,2/6] bnx2x: Enable FEC for 57810-KR |
2011-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,06/11] bnx2x: Fix BCM84833 settings |
2011-06-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,3/3] bnx2x: Fix KR2 work-around condition |
2013-02-27 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,02/11] bnx2x: Fix port type display |
2011-06-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,2/8] bnx2x: ETS changes |
2011-11-27 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-next,03/11] bnx2x: Change return status type |
2011-06-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-2.6,8/8] bnx2x: Update version number |
2010-11-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,04/11] bnx2x: Add TX fault check for fiber PHYs |
2011-06-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,2/6] bnx2x: Enable FEC for 57810-KR |
2011-09-06 |
Yaniv Rosner |
davem |
Superseded |
| [net-next,1/9] bnx2x: Activate LFA |
2012-11-27 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,7/8] bnx2x: Fix self test of BCM57800 |
2011-11-27 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-next,06/10] bnx2x: Apply logic changes for the new scheme |
2010-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,6/9] bnx2x: Add known PHY type check |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net,1/2] bnx2x: Fix intermittent long KR2 link up time |
2013-03-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,3/8] bnx2x: Warpcore-HW reset following fan failure |
2011-11-27 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-2.6,4/8] bnx2x: Clear latch indication on link reset |
2010-11-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,v2,6/6] bnx2x: Fix ethtool advertisement |
2011-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,9/9] bnx2x: Change duplex setting in EEE function |
2012-11-27 |
Yaniv Rosner |
davem |
Accepted |
| [net,v2,1/7] bnx2x: Fix LED blink rate for 578xx |
2011-10-27 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,03/10] bnx2x: Adjust alignment of split PHY functions |
2010-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,4/9] bnx2x: Fix BCM84833 link and LED behavior |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,8/9] bnx2x: Add warning message in case of non-10G SFP module |
2012-11-27 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,2/9] bnx2x: ETS changes |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net-2.6,2/8] bnx2x: Fix waiting for reset complete on BCM848x3 PHYs |
2010-11-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,v2,5/6] bnx2x: Fix 578xx link LED |
2011-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,09/10] bnx2x: Change LED scheme for dual-media |
2010-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net,v2,7/7] bnx2x: update driver version to 1.70.30-0 |
2011-10-27 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,1/8] bnx2x: Fix potential link issue of BCM8073/BCM8727 |
2010-09-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,6/6] bnx2x: Fix ethtool advertisement |
2011-09-06 |
Yaniv Rosner |
davem |
Superseded |
| [net-next,08/10] bnx2x: Add dual-media changes |
2010-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,8/9] bnx2x: Cosmetic changes |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net-next] ethtool: Add 20G bit definitions |
2011-05-03 |
Yaniv Rosner |
davem |
Accepted |
| [net,1/6] bnx2x: Fix ETS bandwidth |
2011-09-06 |
Yaniv Rosner |
davem |
Superseded |
| [net-next,07/11] bnx2x: Fix grammar and relocate code |
2011-06-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,7/7] bnx2x: update driver version to 1.70.30-0 |
2011-10-26 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-next,7/8] bnx2x: Add BCM84823 to the supported PHYs |
2010-09-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,4/6] bnx2x: Fix XMAC loopback test |
2011-09-06 |
Yaniv Rosner |
davem |
Superseded |
| [net-next,05/11] bnx2x: Fix over current port display |
2011-05-22 |
Yaniv Rosner |
davem |
Not Applicable |
| [net,6/7] bnx2x: use FW 7.0.29.0 |
2011-10-26 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-next,5/8] bnx2x: Remove unneeded setting of XAUI low power to BCM8727 |
2010-09-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,v2,1/6] bnx2x: Fix ETS bandwidth |
2011-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,08/11] bnx2x: Adjust BCM8726 module detection settings |
2011-05-22 |
Yaniv Rosner |
davem |
Not Applicable |
| [net,3/7] bnx2x: Fix RX/TX problem caused by the MAC layer |
2011-10-26 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-next,3/8] bnx2x: Reset link before any new link settings |
2010-09-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,1/9] bnx2x: PFC changes |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,07/11] bnx2x: Fix grammar and relocate code |
2011-05-22 |
Yaniv Rosner |
davem |
Not Applicable |
| [net,v2,2/7] bnx2x: Add link retry to 578xx-KR |
2011-10-27 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,6/8] bnx2x: Change BCM848xx LED configuration |
2010-09-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,5/9] bnx2x: Change Warpcore MDIO work around mode |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net-2.6] bnx2x: Fix port identification problem |
2011-04-17 |
Yaniv Rosner |
davem |
Accepted |
| [net,4/7] bnx2x: Fix 54618se LED behavior |
2011-10-26 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-next,2/8] bnx2x: Fix potential link issue In BCM8727 based boards |
2010-09-01 |
Yaniv Rosner |
davem |
Accepted |
| [net,v2,4/6] bnx2x: Fix XMAC loopback test |
2011-09-07 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,01/11] bnx2x: Add new phy BCM8722 |
2011-05-22 |
Yaniv Rosner |
davem |
Not Applicable |
| [net-next,8/8] bnx2x: Cosmetic changes |
2011-11-27 |
Yaniv Rosner |
davem |
Changes Requested |
| [net-next,8/8] bnx2x: Update version to 1.52.53-5 |
2010-09-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,3/9] bnx2x: Warpcore HW reset following fan failure |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,04/11] bnx2x: Add TX fault check for fiber PHYs |
2011-05-22 |
Yaniv Rosner |
davem |
Not Applicable |
| [net] bnx2x: Fix 5461x LED |
2011-11-23 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,4/8] bnx2x: Change BCM848xx configuration according to IEEE |
2010-09-01 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,v2,7/9] bnx2x: Fix self test of BCM57800 |
2011-11-28 |
Yaniv Rosner |
davem |
Accepted |
| [net-next,10/11] bnx2x: Modify XGXS functions |
2011-05-22 |
Yaniv Rosner |
davem |
Not Applicable |
