diff mbox series

[RFC,12/12] mptcp: simult flow self-tests

Message ID 67f4e00895aed1a4678891c0838623df3db2e44e.1596216310.git.pabeni@redhat.com
State Superseded, archived
Headers show
Series mptcp: multiple xmit substreams support | expand

Commit Message

Paolo Abeni July 31, 2020, 5:39 p.m. UTC
Add a bunch of test-cases for multiple subflow xmit:
create multiple subflows simulating different links
condition via netem and verify that the msk is able
to use completely the aggregated bandwidth.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
---
 .../selftests/net/mptcp/simult_flows.sh       | 290 ++++++++++++++++++
 1 file changed, 290 insertions(+)
 create mode 100755 tools/testing/selftests/net/mptcp/simult_flows.sh
diff mbox series

Patch

diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh
new file mode 100755
index 000000000000..0d91a3f87e3f
--- /dev/null
+++ b/tools/testing/selftests/net/mptcp/simult_flows.sh
@@ -0,0 +1,290 @@ 
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+ns1="ns1-$rndh"
+ns2="ns2-$rndh"
+ns3="ns3-$rndh"
+capture=false
+ksft_skip=4
+timeout=30
+test_cnt=1
+ret=0
+bail=0
+
+usage() {
+	echo "Usage: $0 [ -b ] [ -c ] [ -d ]"
+	echo -e "\t-b: bail out after first error, otherwise runs al testcases"
+	echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)"
+	echo -e "\t-d: debug this script"
+}
+
+cleanup()
+{
+	rm -f "$cin" "$cout"
+	rm -f "$sin" "$sout"
+	rm -f "$capout"
+
+	local netns
+	for netns in "$ns1" "$ns2" "$ns3";do
+		ip netns del $netns
+	done
+}
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+#  "$ns1"              ns2                    ns3
+#     ns1eth1    ns2eth1   ns2eth3      ns3eth1
+#            netem
+#     ns1eth2    ns2eth2
+#            netem
+
+setup()
+{
+	large=$(mktemp)
+	small=$(mktemp)
+	sout=$(mktemp)
+	cout=$(mktemp)
+	capout=$(mktemp)
+	size=$((2048 * 4096))
+	dd if=/dev/zero of=$small bs=4096 count=20 >/dev/null 2>&1
+	dd if=/dev/zero of=$large bs=4096 count=$((size / 4096)) >/dev/null 2>&1
+
+	trap cleanup EXIT
+
+	for i in "$ns1" "$ns2" "$ns3";do
+		ip netns add $i || exit $ksft_skip
+		ip -net $i link set lo up
+	done
+
+	ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2"
+	ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth2 netns "$ns2"
+	ip link add ns2eth3 netns "$ns2" type veth peer name ns3eth1 netns "$ns3"
+
+	ip -net "$ns1" addr add 10.0.1.1/24 dev ns1eth1
+	ip -net "$ns1" addr add dead:beef:1::1/64 dev ns1eth1 nodad
+	ip -net "$ns1" link set ns1eth1 up mtu 1500
+	ip -net "$ns1" route add default via 10.0.1.2
+	ip -net "$ns1" route add default via dead:beef:1::2
+
+	ip -net "$ns1" addr add 10.0.2.1/24 dev ns1eth2
+	ip -net "$ns1" addr add dead:beef:2::1/64 dev ns1eth2 nodad
+	ip -net "$ns1" link set ns1eth2 up mtu 1500
+	ip -net "$ns1" route add default via 10.0.2.2 metric 101
+	ip -net "$ns1" route add default via dead:beef:2::2 metric 101
+
+	ip netns exec "$ns1" ./pm_nl_ctl limits 1 1
+	ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow
+	ip netns exec "$ns1" sysctl -q net.ipv4.conf.all.rp_filter=0
+
+	ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1
+	ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad
+	ip -net "$ns2" link set ns2eth1 up mtu 1500
+
+	ip -net "$ns2" addr add 10.0.2.2/24 dev ns2eth2
+	ip -net "$ns2" addr add dead:beef:2::2/64 dev ns2eth2 nodad
+	ip -net "$ns2" link set ns2eth2 up mtu 1500
+
+	ip -net "$ns2" addr add 10.0.3.2/24 dev ns2eth3
+	ip -net "$ns2" addr add dead:beef:3::2/64 dev ns2eth3 nodad
+	ip -net "$ns2" link set ns2eth3 up mtu 1500
+	ip netns exec "$ns2" sysctl -q net.ipv4.ip_forward=1
+	ip netns exec "$ns2" sysctl -q net.ipv6.conf.all.forwarding=1
+
+	ip -net "$ns3" addr add 10.0.3.3/24 dev ns3eth1
+	ip -net "$ns3" addr add dead:beef:3::3/64 dev ns3eth1 nodad
+	ip -net "$ns3" link set ns3eth1 up mtu 1500
+	ip -net "$ns3" route add default via 10.0.3.2
+	ip -net "$ns3" route add default via dead:beef:3::2
+
+	ip netns exec "$ns3" ./pm_nl_ctl limits 1 1
+}
+
+# $1: ns, $2: port
+wait_local_port_listen()
+{
+	local listener_ns="${1}"
+	local port="${2}"
+
+	local port_hex i
+
+	port_hex="$(printf "%04X" "${port}")"
+	for i in $(seq 10); do
+		ip netns exec "${listener_ns}" cat /proc/net/tcp* | \
+			awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" &&
+			break
+		sleep 0.1
+	done
+}
+
+do_transfer()
+{
+	local cin=$1
+	local sin=$2
+	local max_time=$3
+	local port
+	port=$((10000+$test_cnt))
+	test_cnt=$((test_cnt+1))
+
+	:> "$cout"
+	:> "$sout"
+	:> "$capout"
+
+	local addr_port
+	addr_port=$(printf "%s:%d" ${connect_addr} ${port})
+
+	if $capture; then
+		local capuser
+		if [ -z $SUDO_USER ] ; then
+			capuser=""
+		else
+			capuser="-Z $SUDO_USER"
+		fi
+
+		local capfile="${rndh}-${port}"
+		local capopt="-i any -s 65535 -B 32768 ${capuser}"
+
+		ip netns exec ${ns3}  tcpdump ${capopt} -w "${capfile}-listener.pcap"  >> "${capout}" 2>&1 &
+		local cappid_listener=$!
+
+		ip netns exec ${ns1} tcpdump ${capopt} -w "${capfile}-connector.pcap" >> "${capout}" 2>&1 &
+		local cappid_connector=$!
+
+		sleep 1
+	fi
+
+	ip netns exec ${ns3} ./mptcp_connect -jt $timeout -l -p $port 0.0.0.0 < "$sin" > "$sout" &
+	local spid=$!
+
+	wait_local_port_listen "${ns3}" "${port}"
+
+	local start
+	start=$(date +%s%3N)
+	ip netns exec ${ns1} ./mptcp_connect -jt $timeout -p $port 10.0.3.3 < "$cin" > "$cout" &
+	local cpid=$!
+
+	wait $cpid
+	local retc=$?
+	wait $spid
+	local rets=$?
+
+	local stop
+	stop=$(date +%s%3N)
+
+	if $capture; then
+		sleep 1
+		kill ${cappid_listener}
+		kill ${cappid_connector}
+	fi
+
+	local duration
+	duration=$((stop-start))
+
+	cmp $sin $cout > /dev/null 2>&1
+	local cmps=$?
+	cmp $cin $sout > /dev/null 2>&1
+	local cmpc=$?
+
+	printf "%16s" "$duration max $max_time "
+	if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \
+	   [ $cmpc -eq 0 ] && [ $cmps -eq 0 ] && \
+	   [ $duration -lt $max_time ]; then
+		echo "[ OK ]"
+		cat "$capout"
+		return 0
+	fi
+
+	echo " [ fail ]"
+	echo "client exit code $retc, server $rets" 1>&2
+	echo "\nnetns ${ns3} socket stat for $port:" 1>&2
+	ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port"
+	echo "\nnetns ${ns1} socket stat for $port:" 1>&2
+	ip netns exec ${ns1} ss -nita 1>&2 -o "dport = :$port"
+	ls -l $sin $cout
+	ls -l $cin $sout
+
+	cat "$capout"
+	return 1
+}
+
+run_test()
+{
+	local rate1=$1
+	local rate2=$2
+	local delay1=$3
+	local delay2=$4
+	local lret
+	local dev
+	shift 4
+	local msg=$*
+
+	[ $delay1 -gt 0 ] && delay1="delay $delay1" || delay1=""
+	[ $delay2 -gt 0 ] && delay2="delay $delay2" || delay2=""
+
+	for dev in ns1eth1 ns1eth2; do
+		tc -n $ns1 qdisc del dev $dev root >/dev/null 2>&1
+	done
+	for dev in ns2eth1 ns2eth2; do
+		tc -n $ns2 qdisc del dev $dev root >/dev/null 2>&1
+	done
+	tc -n $ns1 qdisc add dev ns1eth1 root netem rate ${rate1}mbit $delay1
+	tc -n $ns1 qdisc add dev ns1eth2 root netem rate ${rate2}mbit $delay2
+	tc -n $ns2 qdisc add dev ns2eth1 root netem rate ${rate1}mbit $delay1
+	tc -n $ns2 qdisc add dev ns2eth2 root netem rate ${rate2}mbit $delay2
+
+	# time is measure in ms
+	local time=$((size * 8 * 1000 / (( $rate1 + $rate2) * 1024 *1024) ))
+
+	# mptcp_connect will sleep a bit to allow for mp_join completion
+	time=$((time + 1000))
+
+	printf "%-50s" "$msg"
+	do_transfer $small $large $((time * 11 / 10))
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		[ $bail -eq 0 ] || exit $ret
+	fi
+
+	printf "%-50s" "$msg - reverse direction"
+	do_transfer $large $small $((time * 11 / 10))
+	lret=$?
+	if [ $lret -ne 0 ]; then
+		ret=$lret
+		[ $bail -eq 0 ] || exit $ret
+	fi
+}
+
+while getopts "bcdh" option;do
+	case "$option" in
+	"h")
+		usage $0
+		exit 0
+		;;
+	"b")
+		bail=1
+		;;
+	"c")
+		capture=true
+		;;
+	"d")
+		set -x
+		;;
+	"?")
+		usage $0
+		exit 1
+		;;
+	esac
+done
+
+setup
+run_test 10 10 0 0 "balanced bwidth"
+run_test 10 10 1 50 "balanced bwidth with unbalanced delay"
+run_test 30 10 0 0 "unbalanced bwidth"
+run_test 30 10 1 50 "unbalanced bwidth with unbalanced delay"
+run_test 30 10 50 1 "unbalanced bwidth with opposed, unbalanced delay"
+exit $ret
\ No newline at end of file