diff --git a/runtest/quickhit b/runtest/quickhit
deleted file mode 100644
index b17318b65..000000000
--- a/runtest/quickhit
+++ /dev/null
@@ -1,316 +0,0 @@
-#DESCRIPTION:A small subset of the syscalls
-access01 access01
-# Basic test for access(2) using F_OK, R_OK, W_OK and X_OK arguments.
-access03 access03
-# EFAULT error testing for access(2)
-alarm02 alarm02
-# Boundary Value Test for alarm(2)
-#    TEST CASES
-#      Test Case One - A call to alarm() shall not return an error if
-#       seconds is a -1.
-#       Test FAILS if a non-zero value is returned.
-#      Test Case Two - A call to alarm() shall not return an error if
-#       seconds is the maximum unsigned integer (2**63).
-#       Test FAILS if a non-zero value is returned.
-#      Test Case Three - A call to alarm() shall not return an error if
-#       seconds is the maximum unsigned integer plus 1 ((2**63)+1).
-#       Test FAILS if a non-zero value is returned.
-alarm03 alarm03
-# alarm(2) cleared by a fork
-#    TEST CASES
-# 	1.) alarm(100), fork, child's alarm(0) shall return 0;
-#	2.) alarm(100), fork, parent's alarm(0) shall return non-zero.
-brk01 brk01
-# Basic test for brk()
-#    TEST CASES
-# 	1.) brk(2) returns...
-chdir01 chdir01
-# Basic test for chdir(2)
-#    TEST CASES
-# 	1.) chdir(2) returns...
-chmod02 chmod02
-# Basic test for chmod(2)
-#    TEST CASES
-# 	1.) chmod(2) returns...
-chown01 chown01
-# Basic test for chown(2)
-#    TEST CASES
-# 	1.) chown(2) returns...
-close08 close08
-# Basic test for close(2)
-#    TEST CASES
-# 	1.) close(2) returns...
-dup01 dup01
-# Basic test for dup(2)
-#    TEST CASES
-# 	1.) dup(2) returns...(See Description)
-dup02 dup02
-#  Negative test for dup(2) with bad fd
-#    TEST CASES
-# 	1-?.) dup(2) returns -1 with errno set to EBADF...(See Description)
-dup03 dup03
-# Negative test for dup(2) (too many fds)
-dup04 dup04
-# Basic test for dup(2) of a system pipe descriptor
-dup05 dup05
-# Basic test for dup(2) of a named pipe descriptor
-execl01 execl01
-# Basic test for execl(2)
-execle01 execle01
-# Basic test for execle(2)
-execlp01 execlp01
-# Basic test for execlp(2
-execv01 execv01
-# Basic test for execv(2)
-execve01 execve01
-# Basic test for execve(2)
-execvp01 execvp01
-# Basic test for execvp(2)
-f00f f00f
-# This is a simple test for handling of the pentium f00f bug.
-# It is an example of a catistrophic test case.  If the system
-# doesn't correctly handle this test, it will likely lockup.
-fchmod01 fchmod01
-# Basic test for fchmod(2) using 0700 argument.
-fchown01 fchown01
-# Basic test for fchown(2)
-fcntl02 fcntl02
-# Basic test for fcntl(2) using F_DUPFD argument
-fcntl03 fcntl03
-# Basic test for fcntl(2) using F_GETFD argument
-fcntl04 fcntl04
-# Basic test for fcntl(2) using F_GETFL argument
-fcntl05 fcntl05
-# Basic test for fcntl(2) using F_GETLK argument
-fcntl07 fcntl07
-# Close-On-Exec of named pipe functional test
-fcntl08 fcntl08
-# Basic test for fcntl(2) using F_SETFL argument
-fcntl09 fcntl09
-# Basic test for fcntl(2) using F_SETLK argument
-fcntl10 fcntl10
-# Basic test for fcntl(2) using F_SETLKW argument
-fork01 fork01
-# Basic test for fork(2)
-#    TEST CASES
-# 	1.) fork returns without error
-# 	2.) fork returns the pid of the child
-fork04 fork04
-# Child inheritance of Environment Variables after fork()
-#    TEST CASES
-#       Test these environment variables correctly inherited by child:
-#       1. TERM
-#       2. NoTSetzWq
-#       3. TESTPROG
-fork05 fork05
-# This is a test sent in my Ulrich Drepper to test for a bug in fork() where
-# %gs is not handled correctly.  See fork05.c for a copy of Ulrich's email
-fpathconf01 fpathconf01
-# Basic test for fpathconf(2)
-fstatfs01 fstatfs01
-# Basic test for fstatfs(2)
-fsync01 fsync01
-# Basic test for fsync(2)
-getegid01 getegid01
-# Basic test for getegid(2)
-geteuid01 geteuid01
-# Basic test for geteuid(2)
-getgid01 getgid01
-# Basic test for getgid(2)
-getgroups01 getgroups01
-# Getgroups system call critical test
-#    TEST CASES
-# 	1. Check to see if getgroups(-1, gidset) fails and sets errno to EINVAL
-# 	2. Check to see if getgroups(0, gidset) does not return -1 and gidset is
-# 	not modified.
-# 	3. Check to see if getgroups(x, gigset) fails and sets errno to EINVAL,
-# 	where x is one less then what is returned by getgroups(0, gidset).
-# 	4. Check to see if getgroups() succeeds and gidset contains
-# 	group id returned from getgid().
-gethostid01 gethostid01
-# Basic test for gethostid(2)
-gethostname01 gethostname01
-# Basic test for gethostname(2)
-getpgrp01 getpgrp01
-# Basic test for getpgrp(2)
-getpid01 getpid01
-# Basic test for getpid(2)
-getppid01 getppid01
-# Basic test for getppid(2)
-getuid01 getuid01
-# Basic test for getuid(2)
-kill02 kill02
-# Sending a signal to processes with the same process group ID.
-kill09 kill09
-# Basic test for kill(2)
-link02 link02
-# Basic test for link(2)
-link03 link03
-# multi links tests
-link04 link04
-# Negative test cases for link(2)
-link05 link05
-# multi links (EMLINK) negative test
-lseek01 lseek01
-lseek02 lseek02
-lseek07 lseek07
-lseek11 lseek11
-# Negative test for lseek(2) of a pipe
-lstat02 lstat02
-# Basic test for lstat(2)
-qmm01 mmap001 -m 1
-# Basic mmap() test.
-open03 open03
-# Basic test for open(2)
-pathconf01 pathconf01
-# Basic test for pathconf(2)
-pause01 pause01
-# Basic test for pause(2)
-read01 read01
-# Basic test for read(2)
-readdir01 readdir01
-# write multiple files and try to find them with readdir
-#    TEST CASES
-# 	1.) Create n files and check that readdir() finds n files
-readlink01 readlink01
-# Basic test for readlink(2)
-rename02 rename02
-# Basic test for rename(2)
-sbrk01 sbrk01
-# Basic test for sbrk(2)
-select01 select01
-# select to a file
-#    TEST CASES
-#      1.) select(2) to a fd of regular file with no I/O and small timeout
-select02 select02
-# select of system pipe fds
-select03 select03
-select04 select04
-# select of fd of a named-pipe (FIFO)
-setgid01 setgid01
-# Basic test for setgid(2)
-setpgid01 setpgid01
-# Basic test for setpgid(2)
-setpgrp01 setpgrp01
-# Basic test for setpgrp(2)
-setregid01 setregid01
-# Basic test for setregid(2)
-setreuid01 setreuid01
-# Basic test for setreuid(2)
-setuid01 setuid01
-# Basic test for setuid(2)
-sighold02 sighold02
-# Holding all signals
-signal03 signal03
-# Boundary value and other invalid value checking of signal setup
-# and signal sending.
-sigrelse01 sigrelse01
-# Releasing held signals
-statfs01 statfs01
-# Basic test for statfs(2) mounted filesys
-statvfs01 statvfs01
-# Basic test for statvfs(2) mounted filesys
-sync01 sync01
-# Basic test for sync(2)
-time01 time01
-# Basic test for time(2)
-times01 times01
-# Basic test for times(2)
-ulimit01 ulimit01
-# Basic test for ulimit(2)
-umask01 umask01
-# Basic test for umask(2)
-uname01 uname01
-# Basic test for uname(2)
-unlink05 unlink05
-# Basic test for unlink(2)
-unlink07 unlink07
-# unlink(2) negative testcases
-unlink08 unlink08
-# unlink(2) negative testcases
-wait02 wait02
-# Basic test for wait(2)
-write01 write01
-# Basic test for write(2)
-symlink01 symlink01
-# Make a Symbolic Link to a File
-#    TEST CASES
-# 	1. Create symbolic link with abnormal object name path
-# 	2. Create symbolic link with normal object name path
-# 	3. Create symbolic link with path to an existing object file
-# 	4. Receive EEXIST error when creating an already existing symbolic link file.
-# 	5. Receive ENAMETOOLONG error when creating symbolic link which exceeds PATH_MAX in length
-symlink02 symlink02
-# Basic test for symlink(2)
-readlink01A symlink01 -T readlink01
-# Reads Value of a Symbolic Link
-#    TEST CASES
-# 	1. Read a symbolic link file which points at no object file
-# 	2. Read a symbolic link file which points at an object file
-# 	3. Receive ENAMETOOLONG error when reading symbolic link which exceeds PATH_MAX in length
-# 	4. Receive an EINVAL error when reading a file which is not a symbolic
-# link file.
-stat04 symlink01 -T stat04
-# Gets File Status Indirectly From a Symbolic Link File
-#    TEST CASES
-# 	1. Get object file status through symbolic link file
-# 	2. Receive ENOENT error when accessing non-existent object file through symbolic link file
-# 	3. Receive ELOOP error when nesting of symbolic links exceed maximum
-lstat01A symlink01 -T lstat01
-# Get file Status About a Symbolic Link File
-#    TEST CASES
-# 	1. Get symbolic link file status when pointing at no object file
-# 	2. Get symbolic link file status when pointing at an object file
-# 	3. Get object file status when argument is not a symbolic link
-# file.
-mkdir05A symlink01 -T mkdir05
-# Fail When Making a Directory File Indirectly From a Symbolic Link File
-#    TEST CASES
-# 	1. Receive EEXIST error when creating a directory through a symbolic link file
-rmdir03A symlink01 -T rmdir03
-# Fail When Removing a Directory File Indirectly From a Symbolic Link File
-#    TEST CASES
-# 	1. Receive ENOTDIR error when removing an existing directory through a symbolic link file
-chdir01A symlink01 -T chdir01
-# Changes Current Working DIrectory Location Indirectly From a Symbolic Link File
-#    TEST CASES
-# 	1. Change current working directory through a symbolic link file
-# 	2. Receive ENOENT error when accessing non-existent directory through symbolic link file
-# 	3. Receive ELOOP error when nesting of symbolic links exceed maximum
-link01 symlink01 -T link01
-# Creates a Link To a File Indirectly From a Symbolic Link File
-#    TEST CASES
-# 	1. Link an object file to a new file through symbolic link file
-# 	2. Receive ENOENT error when accessing non-existent object file through symbolic link file
-# 	3. Receive ELOOP error when nesting of symbolic links exceed maximum
-unlink01 symlink01 -T unlink01
-# Removes a Link To a File And Not Any Object File Which Maybe Pointed At
-#    TEST CASES
-# 	1. Delete a symbolic link file and not the object file which it points at
-chmod01A symlink01 -T chmod01
-# Change Object File Permissions Indirectly From a Symbolic Link File
-#    TEST CASES
-# 	1. Change file permissions of object file through a symbolic link file
-# 	2. Receive ENOENT error when accessing non-existent directory through symbolic link file
-# 	3. Receive ELOOP error when nesting of symbolic links exceed maximum
-utime01A symlink01 -T utime01
-# Set File Access And Modify Object File Times Indirectly From a Symbolic Link File
-#    TEST CASES
-# 	1. Change inode times of object file through a symbolic link file
-# 	2. Receive ENOENT error when accessing non-existent directory through symbolic link file
-# 	3. Receive ELOOP error when nesting of symbolic links exceed maximum
-rename01A symlink01 -T rename01
-# Rename a Symbolic Link File And Not Any Object File
-#    TEST CASES
-# 	1. Rename a symbolic link file which points at no object file
-# 	2. Rename a symbolic link file which points at an object file without any object file alterations.
-# 	3. Receive EXDEV when trying to rename a symbolic link file to an address outside of current file system
-open01A symlink01 -T open01
-# Create/Open a File For Reading Or Writing Indirectly From a Symbolic Link File
-#    TEST CASES
-#  	1. Create an object file through a symbolic link file
-#  	2. Open an object file through a symbolic link file
-#  	3. Receive EEXIST error when exclusively creating an object file through a symbolic link file
-#  	4. Receive ENOENT error when accessing non-existent object file through symbolic link file
-#  	5. Receive ELOOP error when nesting of symbolic links exceed maximum
-
