diff mbox series

[09/21] riscv: dma-mapping: skip invalidation before bidirectional DMA

Message ID 20230327121317.4081816-10-arnd@kernel.org (mailing list archive)
State Handled Elsewhere
Headers show
Series dma-mapping: unify support for cache flushes | expand

Commit Message

Arnd Bergmann March 27, 2023, 12:13 p.m. UTC
From: Arnd Bergmann <arnd@arndb.de>

For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
first to let the device see data written by the CPU, and invalidated
after the transfer to let the CPU see data written by the device.

riscv also invalidates the caches before the transfer, which does
not appear to serve any purpose.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/riscv/mm/dma-noncoherent.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Conor Dooley March 29, 2023, 8:16 p.m. UTC | #1
On Mon, Mar 27, 2023 at 02:13:05PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
> first to let the device see data written by the CPU, and invalidated
> after the transfer to let the CPU see data written by the device.
> 
> riscv also invalidates the caches before the transfer, which does
> not appear to serve any purpose.

Rationale makes sense to me..
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks for working on all of this Arnd!
Lad, Prabhakar March 30, 2023, 1:26 p.m. UTC | #2
On Mon, Mar 27, 2023 at 1:16 PM Arnd Bergmann <arnd@kernel.org> wrote:
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
> first to let the device see data written by the CPU, and invalidated
> after the transfer to let the CPU see data written by the device.
>
> riscv also invalidates the caches before the transfer, which does
> not appear to serve any purpose.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  arch/riscv/mm/dma-noncoherent.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Cheers,
Prabhakar

> diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
> index 640f4c496d26..69c80b2155a1 100644
> --- a/arch/riscv/mm/dma-noncoherent.c
> +++ b/arch/riscv/mm/dma-noncoherent.c
> @@ -25,7 +25,7 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
>                 ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>                 break;
>         case DMA_BIDIRECTIONAL:
> -               ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> +               ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>                 break;
>         default:
>                 break;
> --
> 2.39.2
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Palmer Dabbelt April 19, 2023, 2:22 p.m. UTC | #3
On Mon, 27 Mar 2023 05:13:05 PDT (-0700), arnd@kernel.org wrote:
> From: Arnd Bergmann <arnd@arndb.de>
>
> For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
> first to let the device see data written by the CPU, and invalidated
> after the transfer to let the CPU see data written by the device.
>
> riscv also invalidates the caches before the transfer, which does
> not appear to serve any purpose.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  arch/riscv/mm/dma-noncoherent.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
> index 640f4c496d26..69c80b2155a1 100644
> --- a/arch/riscv/mm/dma-noncoherent.c
> +++ b/arch/riscv/mm/dma-noncoherent.c
> @@ -25,7 +25,7 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
>  		ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>  		break;
>  	case DMA_BIDIRECTIONAL:
> -		ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> +		ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>  		break;
>  	default:
>  		break;

Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Guo Ren May 5, 2023, 5:47 a.m. UTC | #4
On Mon, Mar 27, 2023 at 8:15 PM Arnd Bergmann <arnd@kernel.org> wrote:
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> For a DMA_BIDIRECTIONAL transfer, the caches have to be cleaned
> first to let the device see data written by the CPU, and invalidated
> after the transfer to let the CPU see data written by the device.
>
> riscv also invalidates the caches before the transfer, which does
> not appear to serve any purpose.
Yes, we can't guarantee the CPU pre-load cache lines randomly during
dma working.

But I've two purposes to keep invalidates before dma transfer:
 - We clearly tell the CPU these cache lines are invalid. The caching
algorithm would use these invalid slots first instead of replacing
valid ones.
 - Invalidating is very cheap. Actually, flush and clean have the same
performance in our machine.

So, how about:

diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
index d919efab6eba..2c52fbc15064 100644
--- a/arch/riscv/mm/dma-noncoherent.c
+++ b/arch/riscv/mm/dma-noncoherent.c
@@ -22,8 +22,6 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
                ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
                break;
        case DMA_FROM_DEVICE:
-               ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
-               break;
        case DMA_BIDIRECTIONAL:
                ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
                break;
@@ -42,7 +40,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
                break;
        case DMA_FROM_DEVICE:
        case DMA_BIDIRECTIONAL:
                /* I'm not sure all drivers have guaranteed cacheline
alignment. If not, this inval would cause problems */
-               ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
+               ALT_CMO_OP(inval, vaddr, size, riscv_cbom_block_size);
                break;
        default:
                break;

>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  arch/riscv/mm/dma-noncoherent.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
> index 640f4c496d26..69c80b2155a1 100644
> --- a/arch/riscv/mm/dma-noncoherent.c
> +++ b/arch/riscv/mm/dma-noncoherent.c
> @@ -25,7 +25,7 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
>                 ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>                 break;
>         case DMA_BIDIRECTIONAL:
> -               ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> +               ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>                 break;
>         default:
>                 break;
> --
> 2.39.2
>
Arnd Bergmann May 5, 2023, 1:18 p.m. UTC | #5
On Fri, May 5, 2023, at 07:47, Guo Ren wrote:
> On Mon, Mar 27, 2023 at 8:15 PM Arnd Bergmann <arnd@kernel.org> wrote:

>>
>> riscv also invalidates the caches before the transfer, which does
>> not appear to serve any purpose.
> Yes, we can't guarantee the CPU pre-load cache lines randomly during
> dma working.
>
> But I've two purposes to keep invalidates before dma transfer:
>  - We clearly tell the CPU these cache lines are invalid. The caching
> algorithm would use these invalid slots first instead of replacing
> valid ones.
>  - Invalidating is very cheap. Actually, flush and clean have the same
> performance in our machine.

The main purpose of the series was to get consistent behavior on
all machines, so I really don't want a custom optimization on
one architecture. You make a good point about cacheline reuse
after invalidation, but if we do that, I'd suggest doing this
across all architectures.

> So, how about:
>
> diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
> index d919efab6eba..2c52fbc15064 100644
> --- a/arch/riscv/mm/dma-noncoherent.c
> +++ b/arch/riscv/mm/dma-noncoherent.c
> @@ -22,8 +22,6 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
>                 ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
>                 break;
>         case DMA_FROM_DEVICE:
> -               ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
> -               break;
>         case DMA_BIDIRECTIONAL:
>                 ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
>                 break;

This is something we can consider. Unfortunately, this is something
that no architecture (except pa-risc, which has other problems)
does at the moment, so we'd probably need to have a proper debate
about this.

We already have two conflicting ways to handle DMA_FROM_DEVICE,
either invalidate/invalidate, or clean/invalidate. I can see
that flush/invalidate may be a sensible option as well, but I'd
want to have that discussion after the series is complete, so
we can come to a generic solution that has the same documented
behavior across all architectures.

In particular, if we end up moving arm64 and riscv back to the
traditional invalidate/invalidate for DMA_FROM_DEVICE and
document that driver must not rely on buffers getting cleaned
before a partial DMA_FROM_DEVICE, the question between clean
or flush becomes moot as well.

> @@ -42,7 +40,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
>                 break;
>         case DMA_FROM_DEVICE:
>         case DMA_BIDIRECTIONAL:
>                 /* I'm not sure all drivers have guaranteed cacheline
> alignment. If not, this inval would cause problems */
> -               ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> +               ALT_CMO_OP(inval, vaddr, size, riscv_cbom_block_size);
>                 break;

This is my original patch, and I would not mix it with the other
change. The problem with non-aligned DMA_BIDIRECTIONAL buffers in
is that both flush and inval would be wrong if you get simultaneous
writes from device and cpu to the same cache line, so there is
no way to win this. Using inval instead of flush would at least
work if the CPU data in the cacheline is read-only from the CPU,
so that seems better than something that is always wrong.

The documented API is that sharing the cache line is not allowed
at all, so anything that would observe a difference between the
two is also a bug. One idea that we have considered already is
that we could overwrite the unused bits of the cacheline with
poison values and/or mark them as invalid using KASAN for debugging
purposes, to find drivers that already violate this.

      Arnd
Guo Ren May 6, 2023, 7:25 a.m. UTC | #6
On Fri, May 5, 2023 at 9:19 PM Arnd Bergmann <arnd@arndb.de> wrote:
>
> On Fri, May 5, 2023, at 07:47, Guo Ren wrote:
> > On Mon, Mar 27, 2023 at 8:15 PM Arnd Bergmann <arnd@kernel.org> wrote:
>
> >>
> >> riscv also invalidates the caches before the transfer, which does
> >> not appear to serve any purpose.
> > Yes, we can't guarantee the CPU pre-load cache lines randomly during
> > dma working.
> >
> > But I've two purposes to keep invalidates before dma transfer:
> >  - We clearly tell the CPU these cache lines are invalid. The caching
> > algorithm would use these invalid slots first instead of replacing
> > valid ones.
> >  - Invalidating is very cheap. Actually, flush and clean have the same
> > performance in our machine.
>
> The main purpose of the series was to get consistent behavior on
> all machines, so I really don't want a custom optimization on
> one architecture. You make a good point about cacheline reuse
> after invalidation, but if we do that, I'd suggest doing this
> across all architectures.
Yes, invalidation of DMA_FROM_DEVICE-for_device is a proposal for all
architectures.

>
> > So, how about:
> >
> > diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
> > index d919efab6eba..2c52fbc15064 100644
> > --- a/arch/riscv/mm/dma-noncoherent.c
> > +++ b/arch/riscv/mm/dma-noncoherent.c
> > @@ -22,8 +22,6 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
> >                 ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
> >                 break;
> >         case DMA_FROM_DEVICE:
> > -               ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
> > -               break;
> >         case DMA_BIDIRECTIONAL:
> >                 ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> >                 break;
>
> This is something we can consider. Unfortunately, this is something
> that no architecture (except pa-risc, which has other problems)
> does at the moment, so we'd probably need to have a proper debate
> about this.
>
> We already have two conflicting ways to handle DMA_FROM_DEVICE,
> either invalidate/invalidate, or clean/invalidate. I can see
I vote to invalidate/invalidate.

My key point is to let DMA_FROM_DEVICE-for_device invalidate, and
DMA_BIDIRECTIONAL contains DMA_FROM_DEVICE.
So I also agree:
@@ -22,8 +22,6 @@ void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
                 ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
                 break;
         case DMA_FROM_DEVICE:
 -               ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
 +              ALT_CMO_OP(invalidate, vaddr, size, riscv_cbom_block_size);
                 break;
         case DMA_BIDIRECTIONAL:
                 ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
                 break;

> that flush/invalidate may be a sensible option as well, but I'd
> want to have that discussion after the series is complete, so
> we can come to a generic solution that has the same documented
> behavior across all architectures.
Yes, I agree to unify them into a generic solution first. My proposal
could be another topic in the future.
For that purpose, I give
Acked-by: Guo Ren <guoren@kernel.org>

>
> In particular, if we end up moving arm64 and riscv back to the
> traditional invalidate/invalidate for DMA_FROM_DEVICE and
> document that driver must not rely on buffers getting cleaned
After invalidation, the cache lines are also cleaned, right? So why do
we need to document it additionally?

> before a partial DMA_FROM_DEVICE, the question between clean
> or flush becomes moot as well.
>
> > @@ -42,7 +40,7 @@ void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
> >                 break;
> >         case DMA_FROM_DEVICE:
> >         case DMA_BIDIRECTIONAL:
> >                 /* I'm not sure all drivers have guaranteed cacheline
> > alignment. If not, this inval would cause problems */
> > -               ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
> > +               ALT_CMO_OP(inval, vaddr, size, riscv_cbom_block_size);
> >                 break;
>
> This is my original patch, and I would not mix it with the other
> change. The problem with non-aligned DMA_BIDIRECTIONAL buffers in
> is that both flush and inval would be wrong if you get simultaneous
> writes from device and cpu to the same cache line, so there is
> no way to win this. Using inval instead of flush would at least
> work if the CPU data in the cacheline is read-only from the CPU,
> so that seems better than something that is always wrong.
If CPU data in the cacheline is read-only, the cacheline would never
be dirty. Yes, It's always safe.
Okay, I agree we must keep cache-line-aligned. I comment it here, just
worry some dirty drivers couldn't work with the "invalid mechanism"
because of the CPU data corruption, and device data in the cacheline
is useless.

>
> The documented API is that sharing the cache line is not allowed
> at all, so anything that would observe a difference between the
> two is also a bug. One idea that we have considered already is
> that we could overwrite the unused bits of the cacheline with
> poison values and/or mark them as invalid using KASAN for debugging
> purposes, to find drivers that already violate this.
>
>       Arnd
Arnd Bergmann May 6, 2023, 7:53 a.m. UTC | #7
On Sat, May 6, 2023, at 09:25, Guo Ren wrote:
> On Fri, May 5, 2023 at 9:19 PM Arnd Bergmann <arnd@arndb.de> wrote:
>>
>> This is something we can consider. Unfortunately, this is something
>> that no architecture (except pa-risc, which has other problems)
>> does at the moment, so we'd probably need to have a proper debate
>> about this.
>>
>> We already have two conflicting ways to handle DMA_FROM_DEVICE,
>> either invalidate/invalidate, or clean/invalidate. I can see
> I vote to invalidate/invalidate.
>
...
>
>> that flush/invalidate may be a sensible option as well, but I'd
>> want to have that discussion after the series is complete, so
>> we can come to a generic solution that has the same documented
>> behavior across all architectures.
> Yes, I agree to unify them into a generic solution first. My proposal
> could be another topic in the future.

Right, I was explicitly trying to exclude that question from my
series, and left it as an architecture specific Kconfig option
based on the current behavior.

>> In particular, if we end up moving arm64 and riscv back to the
>> traditional invalidate/invalidate for DMA_FROM_DEVICE and
>> document that driver must not rely on buffers getting cleaned
> After invalidation, the cache lines are also cleaned, right? So why do
> we need to document it additionally?

I mentioned the debate in the cover letter, the full explanation
is archived at
https://lore.kernel.org/all/20220606152150.GA31568@willie-the-truck/

In short, the problem that is addressed here is leaking sensitive
kernel data to user space or a device as in this sequence:

1. A DMA buffer is allocated in the kernel and contains stale data
   that is no longer needed but must not be exposed to untrusted
   userspace, i.e. encryption keys or user file pages
2. allocator uses memset() to clear out the buffer
3. buffer gets mapped into a device for DMA_FROM_DEVICE
4. writeback cache gets invalidated, uncovering the sensitive
   data by discarding the zeros
5. device returns less data than expected
6. buffer is unmapped
7. whole buffer is mapped or copied to user space

Will added his patch for arm64 to prevent this scenario by using
'clean' instead of 'invalidate' in step 4, and the same behavior
got copied to riscv but not most of the other architectures.
The dma-mapping documentation does not say anything about this
case, and an alternative approach would be to document that
device drivers must watch out for short reads in step 5, or that
kzalloc() should clean the cache in step 2. Both of these come
at a cost as well.

     Arnd
diff mbox series

Patch

diff --git a/arch/riscv/mm/dma-noncoherent.c b/arch/riscv/mm/dma-noncoherent.c
index 640f4c496d26..69c80b2155a1 100644
--- a/arch/riscv/mm/dma-noncoherent.c
+++ b/arch/riscv/mm/dma-noncoherent.c
@@ -25,7 +25,7 @@  void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
 		ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
 		break;
 	case DMA_BIDIRECTIONAL:
-		ALT_CMO_OP(flush, vaddr, size, riscv_cbom_block_size);
+		ALT_CMO_OP(clean, vaddr, size, riscv_cbom_block_size);
 		break;
 	default:
 		break;