| Message ID | 20220427075338.1156449-5-michael@walle.cc (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | dt-bindings: convert freescale extirq and scfg schemas | expand |
On Wed, 27 Apr 2022 09:53:38 +0200, Michael Walle wrote: > Convert the fsl,layerscape-scfg binding to the new YAML format. > > In the device trees, the device node always have a "syscon" > compatible, which wasn't mentioned in the previous binding. > > Also added, compared to the original binding, is the > interrupt-controller subnode as used in arch/arm/boot/dts/ls1021a.dtsi > as well as the litte-endian and big-endian properties. > > Signed-off-by: Michael Walle <michael@walle.cc> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > changes since v2: > - none > > changes since v1: > - moved to soc/fsl/fsl,layerscape-scfg.yaml > - generic name for node in example > - mention added "syscon" compatible in commit message > - reference specific interrupt controller > > .../arm/freescale/fsl,layerscape-scfg.txt | 19 ------ > .../bindings/soc/fsl/fsl,layerscape-scfg.yaml | 58 +++++++++++++++++++ > 2 files changed, 58 insertions(+), 19 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt > create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml > Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings. Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future. Full log is available here: https://patchwork.ozlabs.org/patch/ scfg@1570000: interrupt-controller@1ac:interrupt-map-mask:0:0: 15 was expected arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dtb arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dtb arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb scfg@1570000: interrupt-controller@1ac:interrupt-map-mask:0:0: 7 was expected arch/arm/boot/dts/ls1021a-moxa-uc-8410a.dtb arch/arm/boot/dts/ls1021a-qds.dtb arch/arm/boot/dts/ls1021a-tsn.dtb arch/arm/boot/dts/ls1021a-twr.dtb
On Wed, Apr 27, 2022 at 09:53:38AM +0200, Michael Walle wrote: > Convert the fsl,layerscape-scfg binding to the new YAML format. > > In the device trees, the device node always have a "syscon" > compatible, which wasn't mentioned in the previous binding. > > Also added, compared to the original binding, is the > interrupt-controller subnode as used in arch/arm/boot/dts/ls1021a.dtsi > as well as the litte-endian and big-endian properties. > > Signed-off-by: Michael Walle <michael@walle.cc> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > changes since v2: > - none > > changes since v1: > - moved to soc/fsl/fsl,layerscape-scfg.yaml > - generic name for node in example > - mention added "syscon" compatible in commit message > - reference specific interrupt controller > > .../arm/freescale/fsl,layerscape-scfg.txt | 19 ------ > .../bindings/soc/fsl/fsl,layerscape-scfg.yaml | 58 +++++++++++++++++++ > 2 files changed, 58 insertions(+), 19 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt > create mode 100644 Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml Applied, thanks!
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt deleted file mode 100644 index 0ab67b0b216d..000000000000 --- a/Documentation/devicetree/bindings/arm/freescale/fsl,layerscape-scfg.txt +++ /dev/null @@ -1,19 +0,0 @@ -Freescale SCFG - -SCFG is the supplemental configuration unit, that provides SoC specific -configuration and status registers for the chip. Such as getting PEX port -status. - -Required properties: - - compatible: Should contain a chip-specific compatible string, - Chip-specific strings are of the form "fsl,<chip>-scfg", - The following <chip>s are known to be supported: - ls1012a, ls1021a, ls1043a, ls1046a, ls2080a. - - - reg: should contain base address and length of SCFG memory-mapped registers - -Example: - scfg: scfg@1570000 { - compatible = "fsl,ls1021a-scfg"; - reg = <0x0 0x1570000 0x0 0x10000>; - }; diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml new file mode 100644 index 000000000000..8d088b5fe823 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,layerscape-scfg.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/fsl,layerscape-scfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale Layerscape Supplemental Configuration Unit + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Li Yang <leoyang.li@nxp.com> + +description: | + SCFG is the supplemental configuration unit, that provides SoC specific + configuration and status registers for the chip. Such as getting PEX port + status. + +properties: + compatible: + items: + - enum: + - fsl,ls1012a-scfg + - fsl,ls1021a-scfg + - fsl,ls1028a-scfg + - fsl,ls1043a-scfg + - fsl,ls1046a-scfg + - const: syscon + + reg: + maxItems: 1 + + little-endian: true + big-endian: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + ranges: true + +patternProperties: + "^interrupt-controller@[a-z0-9]+$": + $ref: /schemas/interrupt-controller/fsl,ls-extirq.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + syscon@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x1570000 0x10000>; + };