Context |
Check |
Description |
snowpatch_ozlabs/apply_patch |
warning
|
Failed to apply on branch powerpc/merge (4d8244d005b2a92c872a0a993c3aa94b5842e56b)
|
snowpatch_ozlabs/apply_patch |
warning
|
Failed to apply on branch powerpc/next (4336b9337824a60a0b10013c622caeee99460db5)
|
snowpatch_ozlabs/apply_patch |
warning
|
Failed to apply on branch linus/master (d6f9469a03d832dcd17041ed67774ffb5f3e73b3)
|
snowpatch_ozlabs/apply_patch |
warning
|
Failed to apply on branch powerpc/fixes (2f26ed1764b42a8c40d9c48441c73a70d805decf)
|
snowpatch_ozlabs/apply_patch |
success
|
Successfully applied on branch linux-next (48f99181fc118d82dc8bf6c7221ad1c654cb8bc2)
|
snowpatch_ozlabs/build-ppc64le |
success
|
Build succeeded
|
snowpatch_ozlabs/build-ppc64be |
success
|
Build succeeded
|
snowpatch_ozlabs/build-ppc64e |
success
|
Build succeeded
|
snowpatch_ozlabs/build-pmac32 |
success
|
Build succeeded
|
snowpatch_ozlabs/checkpatch |
success
|
total: 0 errors, 0 warnings, 0 checks, 27 lines checked
|
snowpatch_ozlabs/needsstable |
success
|
Patch has no Fixes tags
|
@@ -7,14 +7,16 @@ Required properties:
- fsl,upm-cmd-offset : UPM pattern offset for the command latch.
Optional properties:
-- fsl,upm-wait-flags : add chip-dependent short delays after running the
- UPM pattern (0x1), after writing a data byte (0x2) or after
- writing out a buffer (0x4).
- fsl,upm-addr-line-cs-offsets : address offsets for multi-chip support.
The corresponding address lines are used to select the chip.
- gpios : may specify optional GPIOs connected to the Ready-Not-Busy pins
(R/B#). For multi-chip devices, "n" GPIO definitions are required
according to the number of chips.
+
+Deprecated properties:
+- fsl,upm-wait-flags : add chip-dependent short delays after running the
+ UPM pattern (0x1), after writing a data byte (0x2) or after
+ writing out a buffer (0x4).
- chip-delay : chip dependent delay for transferring data from array to
read registers (tR). Required if property "gpios" is not used
(R/B# pins not connected).
@@ -52,8 +54,6 @@ upm@3,0 {
fsl,upm-cmd-offset = <0x08>;
/* Multi-chip NAND device */
fsl,upm-addr-line-cs-offsets = <0x0 0x200>;
- fsl,upm-wait-flags = <0x5>;
- chip-delay = <25>; // in micro-seconds
nand@0 {
#address-cells = <1>;
Those properties are no longer parsed by the driver which is being passed those information by the core now. Let's deprecate them. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> --- Documentation/devicetree/bindings/mtd/fsl-upm-nand.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)