Message ID | 20200522133318.1681406-1-mpe@ellerman.id.au (mailing list archive) |
---|---|
State | Accepted |
Commit | c5ff46d69c410f7fac173e4fde3eea484b4b4eda |
Headers | show |
Series | [v2] powerpc: Add ppc_inst_next() | expand |
Context | Check | Description |
---|---|---|
snowpatch_ozlabs/apply_patch | success | Successfully applied on branch powerpc/merge (554840f2574c18f341dcfb4144b280b4842186fe) |
snowpatch_ozlabs/build-ppc64le | success | Build succeeded |
snowpatch_ozlabs/build-ppc64be | success | Build succeeded |
snowpatch_ozlabs/build-ppc64e | success | Build succeeded |
snowpatch_ozlabs/build-pmac32 | success | Build succeeded |
snowpatch_ozlabs/checkpatch | warning | Test checkpatch on branch powerpc/merge |
snowpatch_ozlabs/needsstable | success | Patch has no Fixes tags |
Excerpts from Michael Ellerman's message of May 22, 2020 11:33 pm: > In a few places we want to calculate the address of the next > instruction. Previously that was simple, we just added 4 bytes, or if > using a u32 * we incremented that pointer by 1. > > But prefixed instructions make it more complicated, we need to advance > by either 4 or 8 bytes depending on the actual instruction. We also > can't do pointer arithmetic using struct ppc_inst, because it is > always 8 bytes in size on 64-bit, even though we might only need to > advance by 4 bytes. > > So add a ppc_inst_next() helper which calculates the location of the > next instruction, if the given instruction was located at the given > address. Note the instruction doesn't need to actually be at the > address in memory. > > Although it would seem natural for the value to be passed by value, > that makes it too easy to write a loop that will read off the end of a > page, eg: > > for (; src < end; src = ppc_inst_next(src, *src), > dest = ppc_inst_next(dest, *dest)) > > As noticed by Christophe and Jordan, if end is the exact end of a > page, and the next page is not mapped, this will fault, because *dest > will read 8 bytes, 4 bytes into the next page. > > So value is passed by reference, so the helper can be careful to use > ppc_inst_read() on it. > > Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> > --- > arch/powerpc/include/asm/inst.h | 13 +++++++++++++ > arch/powerpc/kernel/uprobes.c | 2 +- > arch/powerpc/lib/feature-fixups.c | 15 ++++++++------- > arch/powerpc/xmon/xmon.c | 2 +- > 4 files changed, 23 insertions(+), 9 deletions(-) > > v2: Pass the value as a pointer and use ppc_inst_read() on it. > > diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h > index d82e0c99cfa1..5b756ba77ed2 100644 > --- a/arch/powerpc/include/asm/inst.h > +++ b/arch/powerpc/include/asm/inst.h > @@ -100,6 +100,19 @@ static inline int ppc_inst_len(struct ppc_inst x) > return ppc_inst_prefixed(x) ? 8 : 4; > } > > +/* > + * Return the address of the next instruction, if the instruction @value was > + * located at @location. > + */ > +static inline struct ppc_inst *ppc_inst_next(void *location, struct ppc_inst *value) > +{ > + struct ppc_inst tmp; > + > + tmp = ppc_inst_read(value); > + > + return location + ppc_inst_len(tmp); > +} > + > int probe_user_read_inst(struct ppc_inst *inst, > struct ppc_inst __user *nip); > > diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c > index 83e883e1a42d..d200e7df7167 100644 > --- a/arch/powerpc/kernel/uprobes.c > +++ b/arch/powerpc/kernel/uprobes.c > @@ -112,7 +112,7 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) > * support doesn't exist and have to fix-up the next instruction > * to be executed. > */ > - regs->nip = utask->vaddr + ppc_inst_len(ppc_inst_read(&auprobe->insn)); > + regs->nip = (unsigned long)ppc_inst_next((void *)utask->vaddr, &auprobe->insn); > > user_disable_single_step(current); > return 0; AFAIKS except for here, there is no need for the void *location arg. I would prefer to drop that and keep this unchanged (it's a slightly special case anyway). Thanks, Nick > diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c > index 80f320c2e189..4c0a7ee9fa00 100644 > --- a/arch/powerpc/lib/feature-fixups.c > +++ b/arch/powerpc/lib/feature-fixups.c > @@ -68,7 +68,7 @@ static int patch_alt_instruction(struct ppc_inst *src, struct ppc_inst *dest, > > static int patch_feature_section(unsigned long value, struct fixup_entry *fcur) > { > - struct ppc_inst *start, *end, *alt_start, *alt_end, *src, *dest; > + struct ppc_inst *start, *end, *alt_start, *alt_end, *src, *dest, nop; > > start = calc_addr(fcur, fcur->start_off); > end = calc_addr(fcur, fcur->end_off); > @@ -84,14 +84,15 @@ static int patch_feature_section(unsigned long value, struct fixup_entry *fcur) > src = alt_start; > dest = start; > > - for (; src < alt_end; src = (void *)src + ppc_inst_len(ppc_inst_read(src)), > - (dest = (void *)dest + ppc_inst_len(ppc_inst_read(dest)))) { > + for (; src < alt_end; src = ppc_inst_next(src, src), > + dest = ppc_inst_next(dest, dest)) { > if (patch_alt_instruction(src, dest, alt_start, alt_end)) > return 1; > } > > - for (; dest < end; dest = (void *)dest + ppc_inst_len(ppc_inst(PPC_INST_NOP))) > - raw_patch_instruction(dest, ppc_inst(PPC_INST_NOP)); > + nop = ppc_inst(PPC_INST_NOP); > + for (; dest < end; dest = ppc_inst_next(dest, &nop)) > + raw_patch_instruction(dest, nop); > > return 0; > } > @@ -405,8 +406,8 @@ static void do_final_fixups(void) > while (src < end) { > inst = ppc_inst_read(src); > raw_patch_instruction(dest, inst); > - src = (void *)src + ppc_inst_len(inst); > - dest = (void *)dest + ppc_inst_len(inst); > + src = ppc_inst_next(src, src); > + dest = ppc_inst_next(dest, dest); > } > #endif > } > diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c > index fb135f2cd6b0..65cf853a4d26 100644 > --- a/arch/powerpc/xmon/xmon.c > +++ b/arch/powerpc/xmon/xmon.c > @@ -939,7 +939,7 @@ static void insert_bpts(void) > } > > patch_instruction(bp->instr, instr); > - patch_instruction((void *)bp->instr + ppc_inst_len(instr), > + patch_instruction(ppc_inst_next(bp->instr, &instr), > ppc_inst(bpinstr)); > if (bp->enabled & BP_CIABR) > continue; > -- > 2.25.1 > >
Excerpts from Nicholas Piggin's message of May 24, 2020 9:56 am: > Excerpts from Michael Ellerman's message of May 22, 2020 11:33 pm: >> In a few places we want to calculate the address of the next >> instruction. Previously that was simple, we just added 4 bytes, or if >> using a u32 * we incremented that pointer by 1. >> >> But prefixed instructions make it more complicated, we need to advance >> by either 4 or 8 bytes depending on the actual instruction. We also >> can't do pointer arithmetic using struct ppc_inst, because it is >> always 8 bytes in size on 64-bit, even though we might only need to >> advance by 4 bytes. >> >> So add a ppc_inst_next() helper which calculates the location of the >> next instruction, if the given instruction was located at the given >> address. Note the instruction doesn't need to actually be at the >> address in memory. >> >> Although it would seem natural for the value to be passed by value, >> that makes it too easy to write a loop that will read off the end of a >> page, eg: >> >> for (; src < end; src = ppc_inst_next(src, *src), >> dest = ppc_inst_next(dest, *dest)) >> >> As noticed by Christophe and Jordan, if end is the exact end of a >> page, and the next page is not mapped, this will fault, because *dest >> will read 8 bytes, 4 bytes into the next page. >> >> So value is passed by reference, so the helper can be careful to use >> ppc_inst_read() on it. >> >> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> >> --- >> arch/powerpc/include/asm/inst.h | 13 +++++++++++++ >> arch/powerpc/kernel/uprobes.c | 2 +- >> arch/powerpc/lib/feature-fixups.c | 15 ++++++++------- >> arch/powerpc/xmon/xmon.c | 2 +- >> 4 files changed, 23 insertions(+), 9 deletions(-) >> >> v2: Pass the value as a pointer and use ppc_inst_read() on it. >> >> diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h >> index d82e0c99cfa1..5b756ba77ed2 100644 >> --- a/arch/powerpc/include/asm/inst.h >> +++ b/arch/powerpc/include/asm/inst.h >> @@ -100,6 +100,19 @@ static inline int ppc_inst_len(struct ppc_inst x) >> return ppc_inst_prefixed(x) ? 8 : 4; >> } >> >> +/* >> + * Return the address of the next instruction, if the instruction @value was >> + * located at @location. >> + */ >> +static inline struct ppc_inst *ppc_inst_next(void *location, struct ppc_inst *value) >> +{ >> + struct ppc_inst tmp; >> + >> + tmp = ppc_inst_read(value); >> + >> + return location + ppc_inst_len(tmp); >> +} >> + >> int probe_user_read_inst(struct ppc_inst *inst, >> struct ppc_inst __user *nip); >> >> diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c >> index 83e883e1a42d..d200e7df7167 100644 >> --- a/arch/powerpc/kernel/uprobes.c >> +++ b/arch/powerpc/kernel/uprobes.c >> @@ -112,7 +112,7 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) >> * support doesn't exist and have to fix-up the next instruction >> * to be executed. >> */ >> - regs->nip = utask->vaddr + ppc_inst_len(ppc_inst_read(&auprobe->insn)); >> + regs->nip = (unsigned long)ppc_inst_next((void *)utask->vaddr, &auprobe->insn); >> >> user_disable_single_step(current); >> return 0; > > AFAIKS except for here, there is no need for the void *location arg. > > I would prefer to drop that and keep this unchanged (it's a slightly > special case anyway). Ooops, I didn't read the last thread. I don't think insert_bpts needs it though, only this case. Anyway it's a minor nitpick so if it's already been considered, fine. Thanks, Nick
Nicholas Piggin <npiggin@gmail.com> writes: > Excerpts from Nicholas Piggin's message of May 24, 2020 9:56 am: >> Excerpts from Michael Ellerman's message of May 22, 2020 11:33 pm: >>> In a few places we want to calculate the address of the next >>> instruction. Previously that was simple, we just added 4 bytes, or if >>> using a u32 * we incremented that pointer by 1. >>> >>> But prefixed instructions make it more complicated, we need to advance >>> by either 4 or 8 bytes depending on the actual instruction. We also >>> can't do pointer arithmetic using struct ppc_inst, because it is >>> always 8 bytes in size on 64-bit, even though we might only need to >>> advance by 4 bytes. >>> >>> So add a ppc_inst_next() helper which calculates the location of the >>> next instruction, if the given instruction was located at the given >>> address. Note the instruction doesn't need to actually be at the >>> address in memory. >>> >>> Although it would seem natural for the value to be passed by value, >>> that makes it too easy to write a loop that will read off the end of a >>> page, eg: >>> >>> for (; src < end; src = ppc_inst_next(src, *src), >>> dest = ppc_inst_next(dest, *dest)) >>> >>> As noticed by Christophe and Jordan, if end is the exact end of a >>> page, and the next page is not mapped, this will fault, because *dest >>> will read 8 bytes, 4 bytes into the next page. >>> >>> So value is passed by reference, so the helper can be careful to use >>> ppc_inst_read() on it. >>> >>> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> >>> --- >>> arch/powerpc/include/asm/inst.h | 13 +++++++++++++ >>> arch/powerpc/kernel/uprobes.c | 2 +- >>> arch/powerpc/lib/feature-fixups.c | 15 ++++++++------- >>> arch/powerpc/xmon/xmon.c | 2 +- >>> 4 files changed, 23 insertions(+), 9 deletions(-) >>> >>> v2: Pass the value as a pointer and use ppc_inst_read() on it. >>> >>> diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h >>> index d82e0c99cfa1..5b756ba77ed2 100644 >>> --- a/arch/powerpc/include/asm/inst.h >>> +++ b/arch/powerpc/include/asm/inst.h >>> @@ -100,6 +100,19 @@ static inline int ppc_inst_len(struct ppc_inst x) >>> return ppc_inst_prefixed(x) ? 8 : 4; >>> } >>> >>> +/* >>> + * Return the address of the next instruction, if the instruction @value was >>> + * located at @location. >>> + */ >>> +static inline struct ppc_inst *ppc_inst_next(void *location, struct ppc_inst *value) >>> +{ >>> + struct ppc_inst tmp; >>> + >>> + tmp = ppc_inst_read(value); >>> + >>> + return location + ppc_inst_len(tmp); >>> +} >>> + >>> int probe_user_read_inst(struct ppc_inst *inst, >>> struct ppc_inst __user *nip); >>> >>> diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c >>> index 83e883e1a42d..d200e7df7167 100644 >>> --- a/arch/powerpc/kernel/uprobes.c >>> +++ b/arch/powerpc/kernel/uprobes.c >>> @@ -112,7 +112,7 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) >>> * support doesn't exist and have to fix-up the next instruction >>> * to be executed. >>> */ >>> - regs->nip = utask->vaddr + ppc_inst_len(ppc_inst_read(&auprobe->insn)); >>> + regs->nip = (unsigned long)ppc_inst_next((void *)utask->vaddr, &auprobe->insn); >>> >>> user_disable_single_step(current); >>> return 0; >> >> AFAIKS except for here, there is no need for the void *location arg. >> >> I would prefer to drop that and keep this unchanged (it's a slightly >> special case anyway). > > Ooops, I didn't read the last thread. I don't think insert_bpts needs it > though, only this case. Anyway it's a minor nitpick so if it's already > been considered, fine. There's a few places that don't need it, eg: + nop = ppc_inst(PPC_INST_NOP); + for (; dest < end; dest = ppc_inst_next(dest, &nop)) + raw_patch_instruction(dest, nop); But I prefer the way that reads, it's clear we're incrementing by the length of a nop, even though we could read the nop from dest because we just patched it. If we ever did execute-only kernel text, it would help to have the location and value separate too, because then reading from the text would require a helper, but reading from data/stack would not. So I'll go with this version. cheers
On Fri, May 22, 2020 at 11:33 PM Michael Ellerman <mpe@ellerman.id.au> wrote: > > In a few places we want to calculate the address of the next > instruction. Previously that was simple, we just added 4 bytes, or if > using a u32 * we incremented that pointer by 1. > > But prefixed instructions make it more complicated, we need to advance > by either 4 or 8 bytes depending on the actual instruction. We also > can't do pointer arithmetic using struct ppc_inst, because it is > always 8 bytes in size on 64-bit, even though we might only need to > advance by 4 bytes. > > So add a ppc_inst_next() helper which calculates the location of the > next instruction, if the given instruction was located at the given > address. Note the instruction doesn't need to actually be at the > address in memory. > > Although it would seem natural for the value to be passed by value, > that makes it too easy to write a loop that will read off the end of a > page, eg: > > for (; src < end; src = ppc_inst_next(src, *src), > dest = ppc_inst_next(dest, *dest)) > > As noticed by Christophe and Jordan, if end is the exact end of a > page, and the next page is not mapped, this will fault, because *dest > will read 8 bytes, 4 bytes into the next page. > > So value is passed by reference, so the helper can be careful to use > ppc_inst_read() on it. > > Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> > --- > arch/powerpc/include/asm/inst.h | 13 +++++++++++++ > arch/powerpc/kernel/uprobes.c | 2 +- > arch/powerpc/lib/feature-fixups.c | 15 ++++++++------- > arch/powerpc/xmon/xmon.c | 2 +- > 4 files changed, 23 insertions(+), 9 deletions(-) > > v2: Pass the value as a pointer and use ppc_inst_read() on it. > > diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h > index d82e0c99cfa1..5b756ba77ed2 100644 > --- a/arch/powerpc/include/asm/inst.h > +++ b/arch/powerpc/include/asm/inst.h > @@ -100,6 +100,19 @@ static inline int ppc_inst_len(struct ppc_inst x) > return ppc_inst_prefixed(x) ? 8 : 4; > } > > +/* > + * Return the address of the next instruction, if the instruction @value was > + * located at @location. > + */ > +static inline struct ppc_inst *ppc_inst_next(void *location, struct ppc_inst *value) > +{ > + struct ppc_inst tmp; > + > + tmp = ppc_inst_read(value); > + > + return location + ppc_inst_len(tmp); > +} > + > int probe_user_read_inst(struct ppc_inst *inst, > struct ppc_inst __user *nip); > > diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c > index 83e883e1a42d..d200e7df7167 100644 > --- a/arch/powerpc/kernel/uprobes.c > +++ b/arch/powerpc/kernel/uprobes.c > @@ -112,7 +112,7 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) > * support doesn't exist and have to fix-up the next instruction > * to be executed. > */ > - regs->nip = utask->vaddr + ppc_inst_len(ppc_inst_read(&auprobe->insn)); > + regs->nip = (unsigned long)ppc_inst_next((void *)utask->vaddr, &auprobe->insn); > > user_disable_single_step(current); > return 0; > diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c > index 80f320c2e189..4c0a7ee9fa00 100644 > --- a/arch/powerpc/lib/feature-fixups.c > +++ b/arch/powerpc/lib/feature-fixups.c > @@ -68,7 +68,7 @@ static int patch_alt_instruction(struct ppc_inst *src, struct ppc_inst *dest, > > static int patch_feature_section(unsigned long value, struct fixup_entry *fcur) > { > - struct ppc_inst *start, *end, *alt_start, *alt_end, *src, *dest; > + struct ppc_inst *start, *end, *alt_start, *alt_end, *src, *dest, nop; > > start = calc_addr(fcur, fcur->start_off); > end = calc_addr(fcur, fcur->end_off); > @@ -84,14 +84,15 @@ static int patch_feature_section(unsigned long value, struct fixup_entry *fcur) > src = alt_start; > dest = start; > > - for (; src < alt_end; src = (void *)src + ppc_inst_len(ppc_inst_read(src)), > - (dest = (void *)dest + ppc_inst_len(ppc_inst_read(dest)))) { > + for (; src < alt_end; src = ppc_inst_next(src, src), > + dest = ppc_inst_next(dest, dest)) { > if (patch_alt_instruction(src, dest, alt_start, alt_end)) > return 1; > } > > - for (; dest < end; dest = (void *)dest + ppc_inst_len(ppc_inst(PPC_INST_NOP))) > - raw_patch_instruction(dest, ppc_inst(PPC_INST_NOP)); > + nop = ppc_inst(PPC_INST_NOP); > + for (; dest < end; dest = ppc_inst_next(dest, &nop)) > + raw_patch_instruction(dest, nop); > > return 0; > } > @@ -405,8 +406,8 @@ static void do_final_fixups(void) > while (src < end) { > inst = ppc_inst_read(src); > raw_patch_instruction(dest, inst); > - src = (void *)src + ppc_inst_len(inst); > - dest = (void *)dest + ppc_inst_len(inst); > + src = ppc_inst_next(src, src); > + dest = ppc_inst_next(dest, dest); > } > #endif > } > diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c > index fb135f2cd6b0..65cf853a4d26 100644 > --- a/arch/powerpc/xmon/xmon.c > +++ b/arch/powerpc/xmon/xmon.c > @@ -939,7 +939,7 @@ static void insert_bpts(void) > } > > patch_instruction(bp->instr, instr); > - patch_instruction((void *)bp->instr + ppc_inst_len(instr), > + patch_instruction(ppc_inst_next(bp->instr, &instr), > ppc_inst(bpinstr)); > if (bp->enabled & BP_CIABR) > continue; > -- > 2.25.1 > Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
On Fri, 22 May 2020 23:33:18 +1000, Michael Ellerman wrote: > In a few places we want to calculate the address of the next > instruction. Previously that was simple, we just added 4 bytes, or if > using a u32 * we incremented that pointer by 1. > > But prefixed instructions make it more complicated, we need to advance > by either 4 or 8 bytes depending on the actual instruction. We also > can't do pointer arithmetic using struct ppc_inst, because it is > always 8 bytes in size on 64-bit, even though we might only need to > advance by 4 bytes. > > [...] Applied to powerpc/next. [1/1] powerpc: Add ppc_inst_next() https://git.kernel.org/powerpc/c/c5ff46d69c410f7fac173e4fde3eea484b4b4eda cheers
diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h index d82e0c99cfa1..5b756ba77ed2 100644 --- a/arch/powerpc/include/asm/inst.h +++ b/arch/powerpc/include/asm/inst.h @@ -100,6 +100,19 @@ static inline int ppc_inst_len(struct ppc_inst x) return ppc_inst_prefixed(x) ? 8 : 4; } +/* + * Return the address of the next instruction, if the instruction @value was + * located at @location. + */ +static inline struct ppc_inst *ppc_inst_next(void *location, struct ppc_inst *value) +{ + struct ppc_inst tmp; + + tmp = ppc_inst_read(value); + + return location + ppc_inst_len(tmp); +} + int probe_user_read_inst(struct ppc_inst *inst, struct ppc_inst __user *nip); diff --git a/arch/powerpc/kernel/uprobes.c b/arch/powerpc/kernel/uprobes.c index 83e883e1a42d..d200e7df7167 100644 --- a/arch/powerpc/kernel/uprobes.c +++ b/arch/powerpc/kernel/uprobes.c @@ -112,7 +112,7 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs) * support doesn't exist and have to fix-up the next instruction * to be executed. */ - regs->nip = utask->vaddr + ppc_inst_len(ppc_inst_read(&auprobe->insn)); + regs->nip = (unsigned long)ppc_inst_next((void *)utask->vaddr, &auprobe->insn); user_disable_single_step(current); return 0; diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 80f320c2e189..4c0a7ee9fa00 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -68,7 +68,7 @@ static int patch_alt_instruction(struct ppc_inst *src, struct ppc_inst *dest, static int patch_feature_section(unsigned long value, struct fixup_entry *fcur) { - struct ppc_inst *start, *end, *alt_start, *alt_end, *src, *dest; + struct ppc_inst *start, *end, *alt_start, *alt_end, *src, *dest, nop; start = calc_addr(fcur, fcur->start_off); end = calc_addr(fcur, fcur->end_off); @@ -84,14 +84,15 @@ static int patch_feature_section(unsigned long value, struct fixup_entry *fcur) src = alt_start; dest = start; - for (; src < alt_end; src = (void *)src + ppc_inst_len(ppc_inst_read(src)), - (dest = (void *)dest + ppc_inst_len(ppc_inst_read(dest)))) { + for (; src < alt_end; src = ppc_inst_next(src, src), + dest = ppc_inst_next(dest, dest)) { if (patch_alt_instruction(src, dest, alt_start, alt_end)) return 1; } - for (; dest < end; dest = (void *)dest + ppc_inst_len(ppc_inst(PPC_INST_NOP))) - raw_patch_instruction(dest, ppc_inst(PPC_INST_NOP)); + nop = ppc_inst(PPC_INST_NOP); + for (; dest < end; dest = ppc_inst_next(dest, &nop)) + raw_patch_instruction(dest, nop); return 0; } @@ -405,8 +406,8 @@ static void do_final_fixups(void) while (src < end) { inst = ppc_inst_read(src); raw_patch_instruction(dest, inst); - src = (void *)src + ppc_inst_len(inst); - dest = (void *)dest + ppc_inst_len(inst); + src = ppc_inst_next(src, src); + dest = ppc_inst_next(dest, dest); } #endif } diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index fb135f2cd6b0..65cf853a4d26 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -939,7 +939,7 @@ static void insert_bpts(void) } patch_instruction(bp->instr, instr); - patch_instruction((void *)bp->instr + ppc_inst_len(instr), + patch_instruction(ppc_inst_next(bp->instr, &instr), ppc_inst(bpinstr)); if (bp->enabled & BP_CIABR) continue;
In a few places we want to calculate the address of the next instruction. Previously that was simple, we just added 4 bytes, or if using a u32 * we incremented that pointer by 1. But prefixed instructions make it more complicated, we need to advance by either 4 or 8 bytes depending on the actual instruction. We also can't do pointer arithmetic using struct ppc_inst, because it is always 8 bytes in size on 64-bit, even though we might only need to advance by 4 bytes. So add a ppc_inst_next() helper which calculates the location of the next instruction, if the given instruction was located at the given address. Note the instruction doesn't need to actually be at the address in memory. Although it would seem natural for the value to be passed by value, that makes it too easy to write a loop that will read off the end of a page, eg: for (; src < end; src = ppc_inst_next(src, *src), dest = ppc_inst_next(dest, *dest)) As noticed by Christophe and Jordan, if end is the exact end of a page, and the next page is not mapped, this will fault, because *dest will read 8 bytes, 4 bytes into the next page. So value is passed by reference, so the helper can be careful to use ppc_inst_read() on it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> --- arch/powerpc/include/asm/inst.h | 13 +++++++++++++ arch/powerpc/kernel/uprobes.c | 2 +- arch/powerpc/lib/feature-fixups.c | 15 ++++++++------- arch/powerpc/xmon/xmon.c | 2 +- 4 files changed, 23 insertions(+), 9 deletions(-) v2: Pass the value as a pointer and use ppc_inst_read() on it.