| Message ID | 20190423162932.21428-25-changbin.du@gmail.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Include linux ACPI/PCI/X86 docs into Sphinx TOC tree | expand |
Em Wed, 24 Apr 2019 00:28:53 +0800 Changbin Du <changbin.du@gmail.com> escreveu: > This converts the plain text documentation to reStructuredText format and > add it to Sphinx TOC tree. No essential content change. > > Signed-off-by: Changbin Du <changbin.du@gmail.com> > --- > Documentation/firmware-guide/acpi/index.rst | 1 + > .../acpi/video_extension.rst} | 63 ++++++++++--------- > 2 files changed, 36 insertions(+), 28 deletions(-) > rename Documentation/{acpi/video_extension.txt => firmware-guide/acpi/video_extension.rst} (79%) > > diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst > index 0e60f4b7129a..ae609eec4679 100644 > --- a/Documentation/firmware-guide/acpi/index.rst > +++ b/Documentation/firmware-guide/acpi/index.rst > @@ -23,3 +23,4 @@ ACPI Support > i2c-muxes > acpi-lid > lpit > + video_extension > diff --git a/Documentation/acpi/video_extension.txt b/Documentation/firmware-guide/acpi/video_extension.rst > similarity index 79% > rename from Documentation/acpi/video_extension.txt > rename to Documentation/firmware-guide/acpi/video_extension.rst > index 79bf6a4921be..06f7e3230b6e 100644 > --- a/Documentation/acpi/video_extension.txt > +++ b/Documentation/firmware-guide/acpi/video_extension.rst > @@ -1,5 +1,8 @@ > +.. SPDX-License-Identifier: GPL-2.0 > + > +===================== > ACPI video extensions > -~~~~~~~~~~~~~~~~~~~~~ > +===================== > > This driver implement the ACPI Extensions For Display Adapters for > integrated graphics devices on motherboard, as specified in ACPI 2.0 > @@ -8,9 +11,10 @@ defining the video POST device, retrieving EDID information or to > setup a video output, etc. Note that this is an ref. implementation > only. It may or may not work for your integrated video device. > > -The ACPI video driver does 3 things regarding backlight control: > +The ACPI video driver does 3 things regarding backlight control. > > -1 Export a sysfs interface for user space to control backlight level > +1. Export a sysfs interface for user space to control backlight level > +===================================================================== > > If the ACPI table has a video device, and acpi_backlight=vendor kernel > command line is not present, the driver will register a backlight device Hmm... you didn't touch on this part of the document: And what ACPI video driver does is: actual_brightness: on read, control method _BQC will be evaluated to get the brightness level the firmware thinks it is at; bl_power: not implemented, will set the current brightness instead; brightness: on write, control method _BCM will run to set the requested brightness level; max_brightness: Derived from the _BCL package(see below); type: firmware You should touch it. My suggestion here is: And what ACPI video driver does is: actual_brightness: on read, control method _BQC will be evaluated to get the brightness level the firmware thinks it is at; bl_power: not implemented, will set the current brightness instead; brightness: on write, control method _BCM will run to set the requested brightness level; max_brightness: Derived from the _BCL package(see below); type: firmware > @@ -32,26 +36,26 @@ type: firmware > > Note that ACPI video backlight driver will always use index for > brightness, actual_brightness and max_brightness. So if we have > -the following _BCL package: > +the following _BCL package:: > > -Method (_BCL, 0, NotSerialized) > -{ > - Return (Package (0x0C) > + Method (_BCL, 0, NotSerialized) > { > - 0x64, > - 0x32, > - 0x0A, > - 0x14, > - 0x1E, > - 0x28, > - 0x32, > - 0x3C, > - 0x46, > - 0x50, > - 0x5A, > - 0x64 > - }) > -} > + Return (Package (0x0C) > + { > + 0x64, > + 0x32, > + 0x0A, > + 0x14, > + 0x1E, > + 0x28, > + 0x32, > + 0x3C, > + 0x46, > + 0x50, > + 0x5A, > + 0x64 > + }) > + } > > The first two levels are for when laptop are on AC or on battery and are > not used by Linux currently. The remaining 10 levels are supported levels > @@ -62,13 +66,15 @@ as a "brightness level" indicator. Thus from the user space perspective > the range of available brightness levels is from 0 to 9 (max_brightness) > inclusive. > > -2 Notify user space about hotkey event > +2. Notify user space about hotkey event > +======================================= > > There are generally two cases for hotkey event reporting: > + > i) For some laptops, when user presses the hotkey, a scancode will be > generated and sent to user space through the input device created by > the keyboard driver as a key type input event, with proper remap, the > - following key code will appear to user space: > + following key code will appear to user space:: > > EV_KEY, KEY_BRIGHTNESSUP > EV_KEY, KEY_BRIGHTNESSDOWN > @@ -82,7 +88,7 @@ ii) For some laptops, the press of the hotkey will not generate the > about the event. The event value is defined in the ACPI spec. ACPI > video driver will generate an key type input event according to the > notify value it received and send the event to user space through the > - input device it created: > + input device it created:: > > event keycode > 0x86 KEY_BRIGHTNESSUP Perhaps making this as a table would work better: input device it created: ===== =================== event keycode ===== =================== 0x86 KEY_BRIGHTNESSUP 0x87 KEY_BRIGHTNESSDOWN etc. ===== =================== > @@ -94,13 +100,14 @@ so this would lead to the same effect as case i) now. > Once user space tool receives this event, it can modify the backlight > level through the sysfs interface. > > -3 Change backlight level in the kernel > +3. Change backlight level in the kernel > +======================================= > > This works for machines covered by case ii) in Section 2. Once the driver > received a notification, it will set the backlight level accordingly. This does > not affect the sending of event to user space, they are always sent to user > space regardless of whether or not the video module controls the backlight level > directly. This behaviour can be controlled through the brightness_switch_enabled > -module parameter as documented in admin-guide/kernel-parameters.rst. It is recommended to > -disable this behaviour once a GUI environment starts up and wants to have full > -control of the backlight level. > +module parameter as documented in admin-guide/kernel-parameters.rst. It is > +recommended to disable this behaviour once a GUI environment starts up and > +wants to have full control of the backlight level. Thanks, Mauro
On Wed, Apr 24, 2019 at 11:56:47AM -0300, Mauro Carvalho Chehab wrote: > Em Wed, 24 Apr 2019 00:28:53 +0800 > Changbin Du <changbin.du@gmail.com> escreveu: > > > This converts the plain text documentation to reStructuredText format and > > add it to Sphinx TOC tree. No essential content change. > > > > Signed-off-by: Changbin Du <changbin.du@gmail.com> > > --- > > Documentation/firmware-guide/acpi/index.rst | 1 + > > .../acpi/video_extension.rst} | 63 ++++++++++--------- > > 2 files changed, 36 insertions(+), 28 deletions(-) > > rename Documentation/{acpi/video_extension.txt => firmware-guide/acpi/video_extension.rst} (79%) > > > > diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst > > index 0e60f4b7129a..ae609eec4679 100644 > > --- a/Documentation/firmware-guide/acpi/index.rst > > +++ b/Documentation/firmware-guide/acpi/index.rst > > @@ -23,3 +23,4 @@ ACPI Support > > i2c-muxes > > acpi-lid > > lpit > > + video_extension > > diff --git a/Documentation/acpi/video_extension.txt b/Documentation/firmware-guide/acpi/video_extension.rst > > similarity index 79% > > rename from Documentation/acpi/video_extension.txt > > rename to Documentation/firmware-guide/acpi/video_extension.rst > > index 79bf6a4921be..06f7e3230b6e 100644 > > --- a/Documentation/acpi/video_extension.txt > > +++ b/Documentation/firmware-guide/acpi/video_extension.rst > > @@ -1,5 +1,8 @@ > > +.. SPDX-License-Identifier: GPL-2.0 > > + > > +===================== > > ACPI video extensions > > -~~~~~~~~~~~~~~~~~~~~~ > > +===================== > > > > This driver implement the ACPI Extensions For Display Adapters for > > integrated graphics devices on motherboard, as specified in ACPI 2.0 > > @@ -8,9 +11,10 @@ defining the video POST device, retrieving EDID information or to > > setup a video output, etc. Note that this is an ref. implementation > > only. It may or may not work for your integrated video device. > > > > -The ACPI video driver does 3 things regarding backlight control: > > +The ACPI video driver does 3 things regarding backlight control. > > > > -1 Export a sysfs interface for user space to control backlight level > > +1. Export a sysfs interface for user space to control backlight level > > +===================================================================== > > > > If the ACPI table has a video device, and acpi_backlight=vendor kernel > > command line is not present, the driver will register a backlight device > > Hmm... you didn't touch on this part of the document: > > And what ACPI video driver does is: > actual_brightness: on read, control method _BQC will be evaluated to > get the brightness level the firmware thinks it is at; > bl_power: not implemented, will set the current brightness instead; > brightness: on write, control method _BCM will run to set the requested > brightness level; > max_brightness: Derived from the _BCL package(see below); > type: firmware > > You should touch it. My suggestion here is: > > And what ACPI video driver does is: > > actual_brightness: > on read, control method _BQC will be evaluated to > get the brightness level the firmware thinks it is at; > bl_power: > not implemented, will set the current brightness instead; > brightness: > on write, control method _BCM will run to set the requested > brightness level; > max_brightness: > Derived from the _BCL package(see below); > type: > firmware > Thanks, done. > > @@ -32,26 +36,26 @@ type: firmware > > > > Note that ACPI video backlight driver will always use index for > > brightness, actual_brightness and max_brightness. So if we have > > -the following _BCL package: > > +the following _BCL package:: > > > > -Method (_BCL, 0, NotSerialized) > > -{ > > - Return (Package (0x0C) > > + Method (_BCL, 0, NotSerialized) > > { > > - 0x64, > > - 0x32, > > - 0x0A, > > - 0x14, > > - 0x1E, > > - 0x28, > > - 0x32, > > - 0x3C, > > - 0x46, > > - 0x50, > > - 0x5A, > > - 0x64 > > - }) > > -} > > + Return (Package (0x0C) > > + { > > + 0x64, > > + 0x32, > > + 0x0A, > > + 0x14, > > + 0x1E, > > + 0x28, > > + 0x32, > > + 0x3C, > > + 0x46, > > + 0x50, > > + 0x5A, > > + 0x64 > > + }) > > + } > > > > The first two levels are for when laptop are on AC or on battery and are > > not used by Linux currently. The remaining 10 levels are supported levels > > @@ -62,13 +66,15 @@ as a "brightness level" indicator. Thus from the user space perspective > > the range of available brightness levels is from 0 to 9 (max_brightness) > > inclusive. > > > > -2 Notify user space about hotkey event > > +2. Notify user space about hotkey event > > +======================================= > > > > There are generally two cases for hotkey event reporting: > > + > > i) For some laptops, when user presses the hotkey, a scancode will be > > generated and sent to user space through the input device created by > > the keyboard driver as a key type input event, with proper remap, the > > - following key code will appear to user space: > > + following key code will appear to user space:: > > > > EV_KEY, KEY_BRIGHTNESSUP > > EV_KEY, KEY_BRIGHTNESSDOWN > > @@ -82,7 +88,7 @@ ii) For some laptops, the press of the hotkey will not generate the > > about the event. The event value is defined in the ACPI spec. ACPI > > video driver will generate an key type input event according to the > > notify value it received and send the event to user space through the > > - input device it created: > > + input device it created:: > > > > event keycode > > 0x86 KEY_BRIGHTNESSUP > > Perhaps making this as a table would work better: > > input device it created: > > ===== =================== > event keycode > ===== =================== > 0x86 KEY_BRIGHTNESSUP > 0x87 KEY_BRIGHTNESSDOWN > etc. > ===== =================== > > Done. > > @@ -94,13 +100,14 @@ so this would lead to the same effect as case i) now. > > Once user space tool receives this event, it can modify the backlight > > level through the sysfs interface. > > > > -3 Change backlight level in the kernel > > +3. Change backlight level in the kernel > > +======================================= > > > > This works for machines covered by case ii) in Section 2. Once the driver > > received a notification, it will set the backlight level accordingly. This does > > not affect the sending of event to user space, they are always sent to user > > space regardless of whether or not the video module controls the backlight level > > directly. This behaviour can be controlled through the brightness_switch_enabled > > -module parameter as documented in admin-guide/kernel-parameters.rst. It is recommended to > > -disable this behaviour once a GUI environment starts up and wants to have full > > -control of the backlight level. > > +module parameter as documented in admin-guide/kernel-parameters.rst. It is > > +recommended to disable this behaviour once a GUI environment starts up and > > +wants to have full control of the backlight level. > > > > Thanks, > Mauro
diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst index 0e60f4b7129a..ae609eec4679 100644 --- a/Documentation/firmware-guide/acpi/index.rst +++ b/Documentation/firmware-guide/acpi/index.rst @@ -23,3 +23,4 @@ ACPI Support i2c-muxes acpi-lid lpit + video_extension diff --git a/Documentation/acpi/video_extension.txt b/Documentation/firmware-guide/acpi/video_extension.rst similarity index 79% rename from Documentation/acpi/video_extension.txt rename to Documentation/firmware-guide/acpi/video_extension.rst index 79bf6a4921be..06f7e3230b6e 100644 --- a/Documentation/acpi/video_extension.txt +++ b/Documentation/firmware-guide/acpi/video_extension.rst @@ -1,5 +1,8 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== ACPI video extensions -~~~~~~~~~~~~~~~~~~~~~ +===================== This driver implement the ACPI Extensions For Display Adapters for integrated graphics devices on motherboard, as specified in ACPI 2.0 @@ -8,9 +11,10 @@ defining the video POST device, retrieving EDID information or to setup a video output, etc. Note that this is an ref. implementation only. It may or may not work for your integrated video device. -The ACPI video driver does 3 things regarding backlight control: +The ACPI video driver does 3 things regarding backlight control. -1 Export a sysfs interface for user space to control backlight level +1. Export a sysfs interface for user space to control backlight level +===================================================================== If the ACPI table has a video device, and acpi_backlight=vendor kernel command line is not present, the driver will register a backlight device @@ -32,26 +36,26 @@ type: firmware Note that ACPI video backlight driver will always use index for brightness, actual_brightness and max_brightness. So if we have -the following _BCL package: +the following _BCL package:: -Method (_BCL, 0, NotSerialized) -{ - Return (Package (0x0C) + Method (_BCL, 0, NotSerialized) { - 0x64, - 0x32, - 0x0A, - 0x14, - 0x1E, - 0x28, - 0x32, - 0x3C, - 0x46, - 0x50, - 0x5A, - 0x64 - }) -} + Return (Package (0x0C) + { + 0x64, + 0x32, + 0x0A, + 0x14, + 0x1E, + 0x28, + 0x32, + 0x3C, + 0x46, + 0x50, + 0x5A, + 0x64 + }) + } The first two levels are for when laptop are on AC or on battery and are not used by Linux currently. The remaining 10 levels are supported levels @@ -62,13 +66,15 @@ as a "brightness level" indicator. Thus from the user space perspective the range of available brightness levels is from 0 to 9 (max_brightness) inclusive. -2 Notify user space about hotkey event +2. Notify user space about hotkey event +======================================= There are generally two cases for hotkey event reporting: + i) For some laptops, when user presses the hotkey, a scancode will be generated and sent to user space through the input device created by the keyboard driver as a key type input event, with proper remap, the - following key code will appear to user space: + following key code will appear to user space:: EV_KEY, KEY_BRIGHTNESSUP EV_KEY, KEY_BRIGHTNESSDOWN @@ -82,7 +88,7 @@ ii) For some laptops, the press of the hotkey will not generate the about the event. The event value is defined in the ACPI spec. ACPI video driver will generate an key type input event according to the notify value it received and send the event to user space through the - input device it created: + input device it created:: event keycode 0x86 KEY_BRIGHTNESSUP @@ -94,13 +100,14 @@ so this would lead to the same effect as case i) now. Once user space tool receives this event, it can modify the backlight level through the sysfs interface. -3 Change backlight level in the kernel +3. Change backlight level in the kernel +======================================= This works for machines covered by case ii) in Section 2. Once the driver received a notification, it will set the backlight level accordingly. This does not affect the sending of event to user space, they are always sent to user space regardless of whether or not the video module controls the backlight level directly. This behaviour can be controlled through the brightness_switch_enabled -module parameter as documented in admin-guide/kernel-parameters.rst. It is recommended to -disable this behaviour once a GUI environment starts up and wants to have full -control of the backlight level. +module parameter as documented in admin-guide/kernel-parameters.rst. It is +recommended to disable this behaviour once a GUI environment starts up and +wants to have full control of the backlight level.
This converts the plain text documentation to reStructuredText format and add it to Sphinx TOC tree. No essential content change. Signed-off-by: Changbin Du <changbin.du@gmail.com> --- Documentation/firmware-guide/acpi/index.rst | 1 + .../acpi/video_extension.rst} | 63 ++++++++++--------- 2 files changed, 36 insertions(+), 28 deletions(-) rename Documentation/{acpi/video_extension.txt => firmware-guide/acpi/video_extension.rst} (79%)