| Message ID | 1467256118-41754-1-git-send-email-hongtao.jia@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Scott Wood |
| Headers | show |
Hi Eduardo, Any comments on this patch? Thanks. -Hongtao. > -----Original Message----- > From: Jia Hongtao [mailto:hongtao.jia@nxp.com] > Sent: Thursday, June 30, 2016 11:09 AM > To: edubezval@gmail.com; rui.zhang@intel.com; robh+dt@kernel.org; > galak@codeaurora.org; Scott Wood <scott.wood@nxp.com>; > shawnguo@kernel.org > Cc: linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; linux-arm- > kernel@lists.infradead.org; Hongtao Jia <hongtao.jia@nxp.com> > Subject: [PATCH V2 7/7] thermal: qoriq: Add thermal management support > > This driver add thermal management support by enabling TMU (Thermal > Monitoring Unit) on QorIQ platform. > > It's based on thermal of framework: > - Trip points defined in device tree. > - Cpufreq as cooling device registered in qoriq cpufreq driver. > > Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> > --- > Changes of V2: > * Add HAS_IOMEM dependency to fix build error on UM > > drivers/thermal/Kconfig | 10 ++ > drivers/thermal/Makefile | 1 + > drivers/thermal/qoriq_thermal.c | 328 > ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 339 insertions(+) > create mode 100644 drivers/thermal/qoriq_thermal.c > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index > 2d702ca..56ef30d 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -195,6 +195,16 @@ config IMX_THERMAL > cpufreq is used as the cooling device to throttle CPUs when the > passive trip is crossed. > > +config QORIQ_THERMAL > + tristate "QorIQ Thermal Monitoring Unit" > + depends on THERMAL_OF > + depends on HAS_IOMEM > + help > + Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms. > + It supports one critical trip point and one passive trip point. The > + cpufreq is used as the cooling device to throttle CPUs when the > + passive trip is crossed. > + > config SPEAR_THERMAL > tristate "SPEAr thermal sensor driver" > depends on PLAT_SPEAR || COMPILE_TEST > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index > 10b07c1..6662232 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -37,6 +37,7 @@ obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o > obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o > obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o > +obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o > obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o > obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o > obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o > diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c new > file mode 100644 index 0000000..644ba52 > --- /dev/null > +++ b/drivers/thermal/qoriq_thermal.c > @@ -0,0 +1,328 @@ > +/* > + * Copyright 2016 Freescale Semiconductor, Inc. > + * > + * This program is free software; you can redistribute it and/or modify > +it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but > +WITHOUT > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY > +or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > +License for > + * more details. > + * > + */ > + > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/thermal.h> > + > +#include "thermal_core.h" > + > +#define SITES_MAX 16 > + > +/* > + * QorIQ TMU Registers > + */ > +struct qoriq_tmu_site_regs { > + u32 tritsr; /* Immediate Temperature Site Register */ > + u32 tratsr; /* Average Temperature Site Register */ > + u8 res0[0x8]; > +}; > + > +struct qoriq_tmu_regs { > + u32 tmr; /* Mode Register */ > +#define TMR_DISABLE 0x0 > +#define TMR_ME 0x80000000 > +#define TMR_ALPF 0x0c000000 > + u32 tsr; /* Status Register */ > + u32 tmtmir; /* Temperature measurement interval Register */ > +#define TMTMIR_DEFAULT 0x0000000f > + u8 res0[0x14]; > + u32 tier; /* Interrupt Enable Register */ > +#define TIER_DISABLE 0x0 > + u32 tidr; /* Interrupt Detect Register */ > + u32 tiscr; /* Interrupt Site Capture Register */ > + u32 ticscr; /* Interrupt Critical Site Capture Register */ > + u8 res1[0x10]; > + u32 tmhtcrh; /* High Temperature Capture Register */ > + u32 tmhtcrl; /* Low Temperature Capture Register */ > + u8 res2[0x8]; > + u32 tmhtitr; /* High Temperature Immediate Threshold */ > + u32 tmhtatr; /* High Temperature Average Threshold */ > + u32 tmhtactr; /* High Temperature Average Crit Threshold */ > + u8 res3[0x24]; > + u32 ttcfgr; /* Temperature Configuration Register */ > + u32 tscfgr; /* Sensor Configuration Register */ > + u8 res4[0x78]; > + struct qoriq_tmu_site_regs site[SITES_MAX]; > + u8 res5[0x9f8]; > + u32 ipbrr0; /* IP Block Revision Register 0 */ > + u32 ipbrr1; /* IP Block Revision Register 1 */ > + u8 res6[0x310]; > + u32 ttr0cr; /* Temperature Range 0 Control Register */ > + u32 ttr1cr; /* Temperature Range 1 Control Register */ > + u32 ttr2cr; /* Temperature Range 2 Control Register */ > + u32 ttr3cr; /* Temperature Range 3 Control Register */ > +}; > + > +/* > + * Thermal zone data > + */ > +struct qoriq_tmu_data { > + struct thermal_zone_device *tz; > + struct qoriq_tmu_regs __iomem *regs; > + int sensor_id; > + bool little_endian; > +}; > + > +static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem > +*addr) { > + if (p->little_endian) > + iowrite32(val, addr); > + else > + iowrite32be(val, addr); > +} > + > +static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) { > + if (p->little_endian) > + return ioread32(addr); > + else > + return ioread32be(addr); > +} > + > +static int tmu_get_temp(void *p, int *temp) { > + u32 val; > + struct qoriq_tmu_data *data = p; > + > + val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr); > + *temp = (val & 0xff) * 1000; > + > + return 0; > +} > + > +static int qoriq_tmu_get_sensor_id(void) { > + int ret, id; > + struct of_phandle_args sensor_specs; > + struct device_node *np, *sensor_np; > + > + np = of_find_node_by_name(NULL, "thermal-zones"); > + if (!np) > + return -ENODEV; > + > + sensor_np = of_get_next_child(np, NULL); > + ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors", > + "#thermal-sensor-cells", > + 0, &sensor_specs); > + if (ret) { > + of_node_put(np); > + of_node_put(sensor_np); > + return ret; > + } > + > + if (sensor_specs.args_count >= 1) { > + id = sensor_specs.args[0]; > + WARN(sensor_specs.args_count > 1, > + "%s: too many cells in sensor specifier %d\n", > + sensor_specs.np->name, > sensor_specs.args_count); > + } else { > + id = 0; > + } > + > + of_node_put(np); > + of_node_put(sensor_np); > + > + return id; > +} > + > +static int qoriq_tmu_calibration(struct platform_device *pdev) { > + int i, val, len; > + u32 range[4]; > + const u32 *calibration; > + struct device_node *np = pdev->dev.of_node; > + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); > + > + if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) { > + dev_err(&pdev->dev, "missing calibration range.\n"); > + return -ENODEV; > + } > + > + /* Init temperature range registers */ > + tmu_write(data, range[0], &data->regs->ttr0cr); > + tmu_write(data, range[1], &data->regs->ttr1cr); > + tmu_write(data, range[2], &data->regs->ttr2cr); > + tmu_write(data, range[3], &data->regs->ttr3cr); > + > + calibration = of_get_property(np, "fsl,tmu-calibration", &len); > + if (calibration == NULL || len % 8) { > + dev_err(&pdev->dev, "invalid calibration data.\n"); > + return -ENODEV; > + } > + > + for (i = 0; i < len; i += 8, calibration += 2) { > + val = of_read_number(calibration, 1); > + tmu_write(data, val, &data->regs->ttcfgr); > + val = of_read_number(calibration + 1, 1); > + tmu_write(data, val, &data->regs->tscfgr); > + } > + > + return 0; > +} > + > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) { > + /* Disable interrupt, using polling instead */ > + tmu_write(data, TIER_DISABLE, &data->regs->tier); > + > + /* Set update_interval */ > + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); > + > + /* Disable monitoring */ > + tmu_write(data, TMR_DISABLE, &data->regs->tmr); } > + > +static struct thermal_zone_of_device_ops tmu_tz_ops = { > + .get_temp = tmu_get_temp, > +}; > + > +static int qoriq_tmu_probe(struct platform_device *pdev) { > + int ret; > + const struct thermal_trip *trip; > + struct qoriq_tmu_data *data; > + struct device_node *np = pdev->dev.of_node; > + u32 site = 0; > + > + if (!np) { > + dev_err(&pdev->dev, "Device OF-Node is NULL"); > + return -ENODEV; > + } > + > + data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data), > + GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, data); > + > + data->little_endian = of_property_read_bool(np, "little-endian"); > + > + data->sensor_id = qoriq_tmu_get_sensor_id(); > + if (data->sensor_id < 0) { > + dev_err(&pdev->dev, "Failed to get sensor id\n"); > + ret = -ENODEV; > + goto err_iomap; > + } > + > + data->regs = of_iomap(np, 0); > + if (!data->regs) { > + dev_err(&pdev->dev, "Failed to get memory region\n"); > + ret = -ENODEV; > + goto err_iomap; > + } > + > + qoriq_tmu_init_device(data); /* TMU initialization */ > + > + ret = qoriq_tmu_calibration(pdev); /* TMU calibration */ > + if (ret < 0) > + goto err_tmu; > + > + data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id, > + data, &tmu_tz_ops); > + if (IS_ERR(data->tz)) { > + ret = PTR_ERR(data->tz); > + dev_err(&pdev->dev, > + "Failed to register thermal zone device %d\n", ret); > + goto err_tmu; > + } > + > + trip = of_thermal_get_trip_points(data->tz); > + > + /* Enable monitoring */ > + site |= 0x1 << (15 - data->sensor_id); > + tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr); > + > + return 0; > + > +err_tmu: > + iounmap(data->regs); > + > +err_iomap: > + platform_set_drvdata(pdev, NULL); > + > + return ret; > +} > + > +static int qoriq_tmu_remove(struct platform_device *pdev) { > + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); > + > + thermal_zone_of_sensor_unregister(&pdev->dev, data->tz); > + > + /* Disable monitoring */ > + tmu_write(data, TMR_DISABLE, &data->regs->tmr); > + > + iounmap(data->regs); > + platform_set_drvdata(pdev, NULL); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int qoriq_tmu_suspend(struct device *dev) { > + u32 tmr; > + struct qoriq_tmu_data *data = dev_get_drvdata(dev); > + > + /* Disable monitoring */ > + tmr = tmu_read(data, &data->regs->tmr); > + tmr &= ~TMR_ME; > + tmu_write(data, tmr, &data->regs->tmr); > + > + return 0; > +} > + > +static int qoriq_tmu_resume(struct device *dev) { > + u32 tmr; > + struct qoriq_tmu_data *data = dev_get_drvdata(dev); > + > + /* Enable monitoring */ > + tmr = tmu_read(data, &data->regs->tmr); > + tmr |= TMR_ME; > + tmu_write(data, tmr, &data->regs->tmr); > + > + return 0; > +} > +#endif > + > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, > + qoriq_tmu_suspend, qoriq_tmu_resume); > + > +static const struct of_device_id qoriq_tmu_match[] = { > + { .compatible = "fsl,qoriq-tmu", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, qoriq_tmu_match); > + > +static struct platform_driver qoriq_tmu = { > + .driver = { > + .name = "qoriq_thermal", > + .pm = &qoriq_tmu_pm_ops, > + .of_match_table = qoriq_tmu_match, > + }, > + .probe = qoriq_tmu_probe, > + .remove = qoriq_tmu_remove, > +}; > +module_platform_driver(qoriq_tmu); > + > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>"); > +MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.1.0.27.g96db324
Hi Eduardo, If you have any comments please let me know. Thanks. -Hongtao. > -----Original Message----- > From: Linuxppc-dev [mailto:linuxppc-dev- > bounces+b38951=freescale.com@lists.ozlabs.org] On Behalf Of Hongtao Jia > Sent: Tuesday, July 19, 2016 2:54 PM > To: edubezval@gmail.com; rui.zhang@intel.com; Scott Wood > <scott.wood@nxp.com> > Cc: devicetree@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; linux- > kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux- > pm@vger.kernel.org > Subject: RE: [PATCH V2 7/7] thermal: qoriq: Add thermal management support > > Hi Eduardo, > > Any comments on this patch? > > Thanks. > -Hongtao. > > > -----Original Message----- > > From: Jia Hongtao [mailto:hongtao.jia@nxp.com] > > Sent: Thursday, June 30, 2016 11:09 AM > > To: edubezval@gmail.com; rui.zhang@intel.com; robh+dt@kernel.org; > > galak@codeaurora.org; Scott Wood <scott.wood@nxp.com>; > > shawnguo@kernel.org > > Cc: linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux- > > kernel@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; linux-arm- > > kernel@lists.infradead.org; Hongtao Jia <hongtao.jia@nxp.com> > > Subject: [PATCH V2 7/7] thermal: qoriq: Add thermal management support > > > > This driver add thermal management support by enabling TMU (Thermal > > Monitoring Unit) on QorIQ platform. > > > > It's based on thermal of framework: > > - Trip points defined in device tree. > > - Cpufreq as cooling device registered in qoriq cpufreq driver. > > > > Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> > > --- > > Changes of V2: > > * Add HAS_IOMEM dependency to fix build error on UM > > > > drivers/thermal/Kconfig | 10 ++ > > drivers/thermal/Makefile | 1 + > > drivers/thermal/qoriq_thermal.c | 328 > > ++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 339 insertions(+) > > create mode 100644 drivers/thermal/qoriq_thermal.c > > > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index > > 2d702ca..56ef30d 100644 > > --- a/drivers/thermal/Kconfig > > +++ b/drivers/thermal/Kconfig > > @@ -195,6 +195,16 @@ config IMX_THERMAL > > cpufreq is used as the cooling device to throttle CPUs when the > > passive trip is crossed. > > > > +config QORIQ_THERMAL > > + tristate "QorIQ Thermal Monitoring Unit" > > + depends on THERMAL_OF > > + depends on HAS_IOMEM > > + help > > + Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms. > > + It supports one critical trip point and one passive trip point. The > > + cpufreq is used as the cooling device to throttle CPUs when the > > + passive trip is crossed. > > + > > config SPEAR_THERMAL > > tristate "SPEAr thermal sensor driver" > > depends on PLAT_SPEAR || COMPILE_TEST diff --git > > a/drivers/thermal/Makefile b/drivers/thermal/Makefile index > > 10b07c1..6662232 100644 > > --- a/drivers/thermal/Makefile > > +++ b/drivers/thermal/Makefile > > @@ -37,6 +37,7 @@ obj-$(CONFIG_DB8500_THERMAL) += > db8500_thermal.o > > obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o > > obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o > > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o > > +obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o > > obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o > > obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o > > obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o > > diff --git a/drivers/thermal/qoriq_thermal.c > > b/drivers/thermal/qoriq_thermal.c new file mode 100644 index > > 0000000..644ba52 > > --- /dev/null > > +++ b/drivers/thermal/qoriq_thermal.c > > @@ -0,0 +1,328 @@ > > +/* > > + * Copyright 2016 Freescale Semiconductor, Inc. > > + * > > + * This program is free software; you can redistribute it and/or > > +modify it > > + * under the terms and conditions of the GNU General Public License, > > + * version 2, as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope it will be useful, but > > +WITHOUT > > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY > > +or > > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > > +License for > > + * more details. > > + * > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/platform_device.h> > > +#include <linux/err.h> > > +#include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/thermal.h> > > + > > +#include "thermal_core.h" > > + > > +#define SITES_MAX 16 > > + > > +/* > > + * QorIQ TMU Registers > > + */ > > +struct qoriq_tmu_site_regs { > > + u32 tritsr; /* Immediate Temperature Site Register */ > > + u32 tratsr; /* Average Temperature Site Register */ > > + u8 res0[0x8]; > > +}; > > + > > +struct qoriq_tmu_regs { > > + u32 tmr; /* Mode Register */ > > +#define TMR_DISABLE 0x0 > > +#define TMR_ME 0x80000000 > > +#define TMR_ALPF 0x0c000000 > > + u32 tsr; /* Status Register */ > > + u32 tmtmir; /* Temperature measurement interval Register */ > > +#define TMTMIR_DEFAULT 0x0000000f > > + u8 res0[0x14]; > > + u32 tier; /* Interrupt Enable Register */ > > +#define TIER_DISABLE 0x0 > > + u32 tidr; /* Interrupt Detect Register */ > > + u32 tiscr; /* Interrupt Site Capture Register */ > > + u32 ticscr; /* Interrupt Critical Site Capture Register */ > > + u8 res1[0x10]; > > + u32 tmhtcrh; /* High Temperature Capture Register */ > > + u32 tmhtcrl; /* Low Temperature Capture Register */ > > + u8 res2[0x8]; > > + u32 tmhtitr; /* High Temperature Immediate Threshold */ > > + u32 tmhtatr; /* High Temperature Average Threshold */ > > + u32 tmhtactr; /* High Temperature Average Crit Threshold */ > > + u8 res3[0x24]; > > + u32 ttcfgr; /* Temperature Configuration Register */ > > + u32 tscfgr; /* Sensor Configuration Register */ > > + u8 res4[0x78]; > > + struct qoriq_tmu_site_regs site[SITES_MAX]; > > + u8 res5[0x9f8]; > > + u32 ipbrr0; /* IP Block Revision Register 0 */ > > + u32 ipbrr1; /* IP Block Revision Register 1 */ > > + u8 res6[0x310]; > > + u32 ttr0cr; /* Temperature Range 0 Control Register */ > > + u32 ttr1cr; /* Temperature Range 1 Control Register */ > > + u32 ttr2cr; /* Temperature Range 2 Control Register */ > > + u32 ttr3cr; /* Temperature Range 3 Control Register */ > > +}; > > + > > +/* > > + * Thermal zone data > > + */ > > +struct qoriq_tmu_data { > > + struct thermal_zone_device *tz; > > + struct qoriq_tmu_regs __iomem *regs; > > + int sensor_id; > > + bool little_endian; > > +}; > > + > > +static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem > > +*addr) { > > + if (p->little_endian) > > + iowrite32(val, addr); > > + else > > + iowrite32be(val, addr); > > +} > > + > > +static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) { > > + if (p->little_endian) > > + return ioread32(addr); > > + else > > + return ioread32be(addr); > > +} > > + > > +static int tmu_get_temp(void *p, int *temp) { > > + u32 val; > > + struct qoriq_tmu_data *data = p; > > + > > + val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr); > > + *temp = (val & 0xff) * 1000; > > + > > + return 0; > > +} > > + > > +static int qoriq_tmu_get_sensor_id(void) { > > + int ret, id; > > + struct of_phandle_args sensor_specs; > > + struct device_node *np, *sensor_np; > > + > > + np = of_find_node_by_name(NULL, "thermal-zones"); > > + if (!np) > > + return -ENODEV; > > + > > + sensor_np = of_get_next_child(np, NULL); > > + ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors", > > + "#thermal-sensor-cells", > > + 0, &sensor_specs); > > + if (ret) { > > + of_node_put(np); > > + of_node_put(sensor_np); > > + return ret; > > + } > > + > > + if (sensor_specs.args_count >= 1) { > > + id = sensor_specs.args[0]; > > + WARN(sensor_specs.args_count > 1, > > + "%s: too many cells in sensor specifier %d\n", > > + sensor_specs.np->name, > > sensor_specs.args_count); > > + } else { > > + id = 0; > > + } > > + > > + of_node_put(np); > > + of_node_put(sensor_np); > > + > > + return id; > > +} > > + > > +static int qoriq_tmu_calibration(struct platform_device *pdev) { > > + int i, val, len; > > + u32 range[4]; > > + const u32 *calibration; > > + struct device_node *np = pdev->dev.of_node; > > + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); > > + > > + if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) { > > + dev_err(&pdev->dev, "missing calibration range.\n"); > > + return -ENODEV; > > + } > > + > > + /* Init temperature range registers */ > > + tmu_write(data, range[0], &data->regs->ttr0cr); > > + tmu_write(data, range[1], &data->regs->ttr1cr); > > + tmu_write(data, range[2], &data->regs->ttr2cr); > > + tmu_write(data, range[3], &data->regs->ttr3cr); > > + > > + calibration = of_get_property(np, "fsl,tmu-calibration", &len); > > + if (calibration == NULL || len % 8) { > > + dev_err(&pdev->dev, "invalid calibration data.\n"); > > + return -ENODEV; > > + } > > + > > + for (i = 0; i < len; i += 8, calibration += 2) { > > + val = of_read_number(calibration, 1); > > + tmu_write(data, val, &data->regs->ttcfgr); > > + val = of_read_number(calibration + 1, 1); > > + tmu_write(data, val, &data->regs->tscfgr); > > + } > > + > > + return 0; > > +} > > + > > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) { > > + /* Disable interrupt, using polling instead */ > > + tmu_write(data, TIER_DISABLE, &data->regs->tier); > > + > > + /* Set update_interval */ > > + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); > > + > > + /* Disable monitoring */ > > + tmu_write(data, TMR_DISABLE, &data->regs->tmr); } > > + > > +static struct thermal_zone_of_device_ops tmu_tz_ops = { > > + .get_temp = tmu_get_temp, > > +}; > > + > > +static int qoriq_tmu_probe(struct platform_device *pdev) { > > + int ret; > > + const struct thermal_trip *trip; > > + struct qoriq_tmu_data *data; > > + struct device_node *np = pdev->dev.of_node; > > + u32 site = 0; > > + > > + if (!np) { > > + dev_err(&pdev->dev, "Device OF-Node is NULL"); > > + return -ENODEV; > > + } > > + > > + data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data), > > + GFP_KERNEL); > > + if (!data) > > + return -ENOMEM; > > + > > + platform_set_drvdata(pdev, data); > > + > > + data->little_endian = of_property_read_bool(np, "little-endian"); > > + > > + data->sensor_id = qoriq_tmu_get_sensor_id(); > > + if (data->sensor_id < 0) { > > + dev_err(&pdev->dev, "Failed to get sensor id\n"); > > + ret = -ENODEV; > > + goto err_iomap; > > + } > > + > > + data->regs = of_iomap(np, 0); > > + if (!data->regs) { > > + dev_err(&pdev->dev, "Failed to get memory region\n"); > > + ret = -ENODEV; > > + goto err_iomap; > > + } > > + > > + qoriq_tmu_init_device(data); /* TMU initialization */ > > + > > + ret = qoriq_tmu_calibration(pdev); /* TMU calibration */ > > + if (ret < 0) > > + goto err_tmu; > > + > > + data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id, > > + data, &tmu_tz_ops); > > + if (IS_ERR(data->tz)) { > > + ret = PTR_ERR(data->tz); > > + dev_err(&pdev->dev, > > + "Failed to register thermal zone device %d\n", ret); > > + goto err_tmu; > > + } > > + > > + trip = of_thermal_get_trip_points(data->tz); > > + > > + /* Enable monitoring */ > > + site |= 0x1 << (15 - data->sensor_id); > > + tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr); > > + > > + return 0; > > + > > +err_tmu: > > + iounmap(data->regs); > > + > > +err_iomap: > > + platform_set_drvdata(pdev, NULL); > > + > > + return ret; > > +} > > + > > +static int qoriq_tmu_remove(struct platform_device *pdev) { > > + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); > > + > > + thermal_zone_of_sensor_unregister(&pdev->dev, data->tz); > > + > > + /* Disable monitoring */ > > + tmu_write(data, TMR_DISABLE, &data->regs->tmr); > > + > > + iounmap(data->regs); > > + platform_set_drvdata(pdev, NULL); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_PM_SLEEP > > +static int qoriq_tmu_suspend(struct device *dev) { > > + u32 tmr; > > + struct qoriq_tmu_data *data = dev_get_drvdata(dev); > > + > > + /* Disable monitoring */ > > + tmr = tmu_read(data, &data->regs->tmr); > > + tmr &= ~TMR_ME; > > + tmu_write(data, tmr, &data->regs->tmr); > > + > > + return 0; > > +} > > + > > +static int qoriq_tmu_resume(struct device *dev) { > > + u32 tmr; > > + struct qoriq_tmu_data *data = dev_get_drvdata(dev); > > + > > + /* Enable monitoring */ > > + tmr = tmu_read(data, &data->regs->tmr); > > + tmr |= TMR_ME; > > + tmu_write(data, tmr, &data->regs->tmr); > > + > > + return 0; > > +} > > +#endif > > + > > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, > > + qoriq_tmu_suspend, qoriq_tmu_resume); > > + > > +static const struct of_device_id qoriq_tmu_match[] = { > > + { .compatible = "fsl,qoriq-tmu", }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, qoriq_tmu_match); > > + > > +static struct platform_driver qoriq_tmu = { > > + .driver = { > > + .name = "qoriq_thermal", > > + .pm = &qoriq_tmu_pm_ops, > > + .of_match_table = qoriq_tmu_match, > > + }, > > + .probe = qoriq_tmu_probe, > > + .remove = qoriq_tmu_remove, > > +}; > > +module_platform_driver(qoriq_tmu); > > + > > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>"); > > +MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.1.0.27.g96db324 > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/linuxppc-dev
On 四, 2016-06-30 at 11:08 +0800, Jia Hongtao wrote: > This driver add thermal management support by enabling TMU (Thermal > Monitoring Unit) on QorIQ platform. > > It's based on thermal of framework: > - Trip points defined in device tree. > - Cpufreq as cooling device registered in qoriq cpufreq driver. > > Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> The patch looks good to me. I only need to take this patch, right? thanks, rui > --- > Changes of V2: > * Add HAS_IOMEM dependency to fix build error on UM > > drivers/thermal/Kconfig | 10 ++ > drivers/thermal/Makefile | 1 + > drivers/thermal/qoriq_thermal.c | 328 > ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 339 insertions(+) > create mode 100644 drivers/thermal/qoriq_thermal.c > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 2d702ca..56ef30d 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -195,6 +195,16 @@ config IMX_THERMAL > cpufreq is used as the cooling device to throttle CPUs > when the > passive trip is crossed. > > +config QORIQ_THERMAL > + tristate "QorIQ Thermal Monitoring Unit" > + depends on THERMAL_OF > + depends on HAS_IOMEM > + help > + Support for Thermal Monitoring Unit (TMU) found on QorIQ > platforms. > + It supports one critical trip point and one passive trip > point. The > + cpufreq is used as the cooling device to throttle CPUs > when the > + passive trip is crossed. > + > config SPEAR_THERMAL > tristate "SPEAr thermal sensor driver" > depends on PLAT_SPEAR || COMPILE_TEST > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > index 10b07c1..6662232 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -37,6 +37,7 @@ obj-$(CONFIG_DB8500_THERMAL) += > db8500_thermal.o > obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o > obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o > +obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o > obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += > db8500_cpufreq_cooling.o > obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o > obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o > diff --git a/drivers/thermal/qoriq_thermal.c > b/drivers/thermal/qoriq_thermal.c > new file mode 100644 > index 0000000..644ba52 > --- /dev/null > +++ b/drivers/thermal/qoriq_thermal.c > @@ -0,0 +1,328 @@ > +/* > + * Copyright 2016 Freescale Semiconductor, Inc. > + * > + * This program is free software; you can redistribute it and/or > modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + * > + * This program is distributed in the hope it will be useful, but > WITHOUT > + * ANY WARRANTY; without even the implied warranty of > MERCHANTABILITY or > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > License for > + * more details. > + * > + */ > + > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/err.h> > +#include <linux/io.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/thermal.h> > + > +#include "thermal_core.h" > + > +#define SITES_MAX 16 > + > +/* > + * QorIQ TMU Registers > + */ > +struct qoriq_tmu_site_regs { > + u32 tritsr; /* Immediate Temperature Site > Register */ > + u32 tratsr; /* Average Temperature Site > Register */ > + u8 res0[0x8]; > +}; > + > +struct qoriq_tmu_regs { > + u32 tmr; /* Mode Register */ > +#define TMR_DISABLE 0x0 > +#define TMR_ME 0x80000000 > +#define TMR_ALPF 0x0c000000 > + u32 tsr; /* Status Register */ > + u32 tmtmir; /* Temperature measurement > interval Register */ > +#define TMTMIR_DEFAULT 0x0000000f > + u8 res0[0x14]; > + u32 tier; /* Interrupt Enable Register */ > +#define TIER_DISABLE 0x0 > + u32 tidr; /* Interrupt Detect Register */ > + u32 tiscr; /* Interrupt Site Capture Register > */ > + u32 ticscr; /* Interrupt Critical Site > Capture Register */ > + u8 res1[0x10]; > + u32 tmhtcrh; /* High Temperature Capture > Register */ > + u32 tmhtcrl; /* Low Temperature Capture > Register */ > + u8 res2[0x8]; > + u32 tmhtitr; /* High Temperature Immediate > Threshold */ > + u32 tmhtatr; /* High Temperature Average > Threshold */ > + u32 tmhtactr; /* High Temperature Average Crit > Threshold */ > + u8 res3[0x24]; > + u32 ttcfgr; /* Temperature Configuration > Register */ > + u32 tscfgr; /* Sensor Configuration Register > */ > + u8 res4[0x78]; > + struct qoriq_tmu_site_regs site[SITES_MAX]; > + u8 res5[0x9f8]; > + u32 ipbrr0; /* IP Block Revision Register 0 > */ > + u32 ipbrr1; /* IP Block Revision Register 1 > */ > + u8 res6[0x310]; > + u32 ttr0cr; /* Temperature Range 0 Control > Register */ > + u32 ttr1cr; /* Temperature Range 1 Control > Register */ > + u32 ttr2cr; /* Temperature Range 2 Control > Register */ > + u32 ttr3cr; /* Temperature Range 3 Control > Register */ > +}; > + > +/* > + * Thermal zone data > + */ > +struct qoriq_tmu_data { > + struct thermal_zone_device *tz; > + struct qoriq_tmu_regs __iomem *regs; > + int sensor_id; > + bool little_endian; > +}; > + > +static void tmu_write(struct qoriq_tmu_data *p, u32 val, void > __iomem *addr) > +{ > + if (p->little_endian) > + iowrite32(val, addr); > + else > + iowrite32be(val, addr); > +} > + > +static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) > +{ > + if (p->little_endian) > + return ioread32(addr); > + else > + return ioread32be(addr); > +} > + > +static int tmu_get_temp(void *p, int *temp) > +{ > + u32 val; > + struct qoriq_tmu_data *data = p; > + > + val = tmu_read(data, &data->regs->site[data- > >sensor_id].tritsr); > + *temp = (val & 0xff) * 1000; > + > + return 0; > +} > + > +static int qoriq_tmu_get_sensor_id(void) > +{ > + int ret, id; > + struct of_phandle_args sensor_specs; > + struct device_node *np, *sensor_np; > + > + np = of_find_node_by_name(NULL, "thermal-zones"); > + if (!np) > + return -ENODEV; > + > + sensor_np = of_get_next_child(np, NULL); > + ret = of_parse_phandle_with_args(sensor_np, "thermal- > sensors", > + "#thermal-sensor-cells", > + 0, &sensor_specs); > + if (ret) { > + of_node_put(np); > + of_node_put(sensor_np); > + return ret; > + } > + > + if (sensor_specs.args_count >= 1) { > + id = sensor_specs.args[0]; > + WARN(sensor_specs.args_count > 1, > + "%s: too many cells in sensor > specifier %d\n", > + sensor_specs.np->name, > sensor_specs.args_count); > + } else { > + id = 0; > + } > + > + of_node_put(np); > + of_node_put(sensor_np); > + > + return id; > +} > + > +static int qoriq_tmu_calibration(struct platform_device *pdev) > +{ > + int i, val, len; > + u32 range[4]; > + const u32 *calibration; > + struct device_node *np = pdev->dev.of_node; > + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); > + > + if (of_property_read_u32_array(np, "fsl,tmu-range", range, > 4)) { > + dev_err(&pdev->dev, "missing calibration range.\n"); > + return -ENODEV; > + } > + > + /* Init temperature range registers */ > + tmu_write(data, range[0], &data->regs->ttr0cr); > + tmu_write(data, range[1], &data->regs->ttr1cr); > + tmu_write(data, range[2], &data->regs->ttr2cr); > + tmu_write(data, range[3], &data->regs->ttr3cr); > + > + calibration = of_get_property(np, "fsl,tmu-calibration", > &len); > + if (calibration == NULL || len % 8) { > + dev_err(&pdev->dev, "invalid calibration data.\n"); > + return -ENODEV; > + } > + > + for (i = 0; i < len; i += 8, calibration += 2) { > + val = of_read_number(calibration, 1); > + tmu_write(data, val, &data->regs->ttcfgr); > + val = of_read_number(calibration + 1, 1); > + tmu_write(data, val, &data->regs->tscfgr); > + } > + > + return 0; > +} > + > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) > +{ > + /* Disable interrupt, using polling instead */ > + tmu_write(data, TIER_DISABLE, &data->regs->tier); > + > + /* Set update_interval */ > + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); > + > + /* Disable monitoring */ > + tmu_write(data, TMR_DISABLE, &data->regs->tmr); > +} > + > +static struct thermal_zone_of_device_ops tmu_tz_ops = { > + .get_temp = tmu_get_temp, > +}; > + > +static int qoriq_tmu_probe(struct platform_device *pdev) > +{ > + int ret; > + const struct thermal_trip *trip; > + struct qoriq_tmu_data *data; > + struct device_node *np = pdev->dev.of_node; > + u32 site = 0; > + > + if (!np) { > + dev_err(&pdev->dev, "Device OF-Node is NULL"); > + return -ENODEV; > + } > + > + data = devm_kzalloc(&pdev->dev, sizeof(struct > qoriq_tmu_data), > + GFP_KERNEL); > + if (!data) > + return -ENOMEM; > + > + platform_set_drvdata(pdev, data); > + > + data->little_endian = of_property_read_bool(np, "little- > endian"); > + > + data->sensor_id = qoriq_tmu_get_sensor_id(); > + if (data->sensor_id < 0) { > + dev_err(&pdev->dev, "Failed to get sensor id\n"); > + ret = -ENODEV; > + goto err_iomap; > + } > + > + data->regs = of_iomap(np, 0); > + if (!data->regs) { > + dev_err(&pdev->dev, "Failed to get memory > region\n"); > + ret = -ENODEV; > + goto err_iomap; > + } > + > + qoriq_tmu_init_device(data); /* TMU initialization */ > + > + ret = qoriq_tmu_calibration(pdev); /* TMU calibration > */ > + if (ret < 0) > + goto err_tmu; > + > + data->tz = thermal_zone_of_sensor_register(&pdev->dev, data- > >sensor_id, > + data, &tmu_tz_ops); > + if (IS_ERR(data->tz)) { > + ret = PTR_ERR(data->tz); > + dev_err(&pdev->dev, > + "Failed to register thermal zone device > %d\n", ret); > + goto err_tmu; > + } > + > + trip = of_thermal_get_trip_points(data->tz); > + > + /* Enable monitoring */ > + site |= 0x1 << (15 - data->sensor_id); > + tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr); > + > + return 0; > + > +err_tmu: > + iounmap(data->regs); > + > +err_iomap: > + platform_set_drvdata(pdev, NULL); > + > + return ret; > +} > + > +static int qoriq_tmu_remove(struct platform_device *pdev) > +{ > + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); > + > + thermal_zone_of_sensor_unregister(&pdev->dev, data->tz); > + > + /* Disable monitoring */ > + tmu_write(data, TMR_DISABLE, &data->regs->tmr); > + > + iounmap(data->regs); > + platform_set_drvdata(pdev, NULL); > + > + return 0; > +} > + > +#ifdef CONFIG_PM_SLEEP > +static int qoriq_tmu_suspend(struct device *dev) > +{ > + u32 tmr; > + struct qoriq_tmu_data *data = dev_get_drvdata(dev); > + > + /* Disable monitoring */ > + tmr = tmu_read(data, &data->regs->tmr); > + tmr &= ~TMR_ME; > + tmu_write(data, tmr, &data->regs->tmr); > + > + return 0; > +} > + > +static int qoriq_tmu_resume(struct device *dev) > +{ > + u32 tmr; > + struct qoriq_tmu_data *data = dev_get_drvdata(dev); > + > + /* Enable monitoring */ > + tmr = tmu_read(data, &data->regs->tmr); > + tmr |= TMR_ME; > + tmu_write(data, tmr, &data->regs->tmr); > + > + return 0; > +} > +#endif > + > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, > + qoriq_tmu_suspend, qoriq_tmu_resume); > + > +static const struct of_device_id qoriq_tmu_match[] = { > + { .compatible = "fsl,qoriq-tmu", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, qoriq_tmu_match); > + > +static struct platform_driver qoriq_tmu = { > + .driver = { > + .name = "qoriq_thermal", > + .pm = &qoriq_tmu_pm_ops, > + .of_match_table = qoriq_tmu_match, > + }, > + .probe = qoriq_tmu_probe, > + .remove = qoriq_tmu_remove, > +}; > +module_platform_driver(qoriq_tmu); > + > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>"); > +MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.1.0.27.g96db324 >
> -----Original Message----- > From: Zhang Rui [mailto:rui.zhang@intel.com] > Sent: Friday, August 19, 2016 8:40 PM > To: Hongtao Jia <hongtao.jia@nxp.com>; edubezval@gmail.com; > robh+dt@kernel.org; galak@codeaurora.org; Scott Wood > <scott.wood@nxp.com>; shawnguo@kernel.org > Cc: linux-pm@vger.kernel.org; devicetree@vger.kernel.org; linux- > kernel@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH V2 7/7] thermal: qoriq: Add thermal management support > > On 四, 2016-06-30 at 11:08 +0800, Jia Hongtao wrote: > > This driver add thermal management support by enabling TMU (Thermal > > Monitoring Unit) on QorIQ platform. > > > > It's based on thermal of framework: > > - Trip points defined in device tree. > > - Cpufreq as cooling device registered in qoriq cpufreq driver. > > > > Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> > > The patch looks good to me. > I only need to take this patch, right? > > thanks, > rui Yes. You just need to take this patch. Sorry for the late response. I was on my long vacation back then. Thanks, Hongtao. > > --- > > Changes of V2: > > * Add HAS_IOMEM dependency to fix build error on UM > > > > drivers/thermal/Kconfig | 10 ++ > > drivers/thermal/Makefile | 1 + > > drivers/thermal/qoriq_thermal.c | 328 > > ++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 339 insertions(+) > > create mode 100644 drivers/thermal/qoriq_thermal.c > > > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > > index 2d702ca..56ef30d 100644 > > --- a/drivers/thermal/Kconfig > > +++ b/drivers/thermal/Kconfig > > @@ -195,6 +195,16 @@ config IMX_THERMAL > > cpufreq is used as the cooling device to throttle CPUs > > when the > > passive trip is crossed. > > > > +config QORIQ_THERMAL > > + tristate "QorIQ Thermal Monitoring Unit" > > + depends on THERMAL_OF > > + depends on HAS_IOMEM > > + help > > + Support for Thermal Monitoring Unit (TMU) found on QorIQ > > platforms. > > + It supports one critical trip point and one passive trip > > point. The > > + cpufreq is used as the cooling device to throttle CPUs > > when the > > + passive trip is crossed. > > + > > config SPEAR_THERMAL > > tristate "SPEAr thermal sensor driver" > > depends on PLAT_SPEAR || COMPILE_TEST > > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > > index 10b07c1..6662232 100644 > > --- a/drivers/thermal/Makefile > > +++ b/drivers/thermal/Makefile > > @@ -37,6 +37,7 @@ obj-$(CONFIG_DB8500_THERMAL) += > > db8500_thermal.o > > obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o > > obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o > > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o > > +obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o > > obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += > > db8500_cpufreq_cooling.o > > obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o > > obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o > > diff --git a/drivers/thermal/qoriq_thermal.c > > b/drivers/thermal/qoriq_thermal.c > > new file mode 100644 > > index 0000000..644ba52 > > --- /dev/null > > +++ b/drivers/thermal/qoriq_thermal.c > > @@ -0,0 +1,328 @@ > > +/* > > + * Copyright 2016 Freescale Semiconductor, Inc. > > + * > > + * This program is free software; you can redistribute it and/or > > modify it > > + * under the terms and conditions of the GNU General Public License, > > + * version 2, as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope it will be useful, but > > WITHOUT > > + * ANY WARRANTY; without even the implied warranty of > > MERCHANTABILITY or > > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > > License for > > + * more details. > > + * > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/platform_device.h> > > +#include <linux/err.h> > > +#include <linux/io.h> > > +#include <linux/of.h> > > +#include <linux/of_address.h> > > +#include <linux/thermal.h> > > + > > +#include "thermal_core.h" > > + > > +#define SITES_MAX 16 > > + > > +/* > > + * QorIQ TMU Registers > > + */ > > +struct qoriq_tmu_site_regs { > > + u32 tritsr; /* Immediate Temperature Site > > Register */ > > + u32 tratsr; /* Average Temperature Site > > Register */ > > + u8 res0[0x8]; > > +}; > > + > > +struct qoriq_tmu_regs { > > + u32 tmr; /* Mode Register */ > > +#define TMR_DISABLE 0x0 > > +#define TMR_ME 0x80000000 > > +#define TMR_ALPF 0x0c000000 > > + u32 tsr; /* Status Register */ > > + u32 tmtmir; /* Temperature measurement > > interval Register */ > > +#define TMTMIR_DEFAULT 0x0000000f > > + u8 res0[0x14]; > > + u32 tier; /* Interrupt Enable Register */ > > +#define TIER_DISABLE 0x0 > > + u32 tidr; /* Interrupt Detect Register */ > > + u32 tiscr; /* Interrupt Site Capture Register > > */ > > + u32 ticscr; /* Interrupt Critical Site > > Capture Register */ > > + u8 res1[0x10]; > > + u32 tmhtcrh; /* High Temperature Capture > > Register */ > > + u32 tmhtcrl; /* Low Temperature Capture > > Register */ > > + u8 res2[0x8]; > > + u32 tmhtitr; /* High Temperature Immediate > > Threshold */ > > + u32 tmhtatr; /* High Temperature Average > > Threshold */ > > + u32 tmhtactr; /* High Temperature Average Crit > > Threshold */ > > + u8 res3[0x24]; > > + u32 ttcfgr; /* Temperature Configuration > > Register */ > > + u32 tscfgr; /* Sensor Configuration Register > > */ > > + u8 res4[0x78]; > > + struct qoriq_tmu_site_regs site[SITES_MAX]; > > + u8 res5[0x9f8]; > > + u32 ipbrr0; /* IP Block Revision Register 0 > > */ > > + u32 ipbrr1; /* IP Block Revision Register 1 > > */ > > + u8 res6[0x310]; > > + u32 ttr0cr; /* Temperature Range 0 Control > > Register */ > > + u32 ttr1cr; /* Temperature Range 1 Control > > Register */ > > + u32 ttr2cr; /* Temperature Range 2 Control > > Register */ > > + u32 ttr3cr; /* Temperature Range 3 Control > > Register */ > > +}; > > + > > +/* > > + * Thermal zone data > > + */ > > +struct qoriq_tmu_data { > > + struct thermal_zone_device *tz; > > + struct qoriq_tmu_regs __iomem *regs; > > + int sensor_id; > > + bool little_endian; > > +}; > > + > > +static void tmu_write(struct qoriq_tmu_data *p, u32 val, void > > __iomem *addr) > > +{ > > + if (p->little_endian) > > + iowrite32(val, addr); > > + else > > + iowrite32be(val, addr); > > +} > > + > > +static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) > > +{ > > + if (p->little_endian) > > + return ioread32(addr); > > + else > > + return ioread32be(addr); > > +} > > + > > +static int tmu_get_temp(void *p, int *temp) > > +{ > > + u32 val; > > + struct qoriq_tmu_data *data = p; > > + > > + val = tmu_read(data, &data->regs->site[data- > > >sensor_id].tritsr); > > + *temp = (val & 0xff) * 1000; > > + > > + return 0; > > +} > > + > > +static int qoriq_tmu_get_sensor_id(void) > > +{ > > + int ret, id; > > + struct of_phandle_args sensor_specs; > > + struct device_node *np, *sensor_np; > > + > > + np = of_find_node_by_name(NULL, "thermal-zones"); > > + if (!np) > > + return -ENODEV; > > + > > + sensor_np = of_get_next_child(np, NULL); > > + ret = of_parse_phandle_with_args(sensor_np, "thermal- > > sensors", > > + "#thermal-sensor-cells", > > + 0, &sensor_specs); > > + if (ret) { > > + of_node_put(np); > > + of_node_put(sensor_np); > > + return ret; > > + } > > + > > + if (sensor_specs.args_count >= 1) { > > + id = sensor_specs.args[0]; > > + WARN(sensor_specs.args_count > 1, > > + "%s: too many cells in sensor > > specifier %d\n", > > + sensor_specs.np->name, > > sensor_specs.args_count); > > + } else { > > + id = 0; > > + } > > + > > + of_node_put(np); > > + of_node_put(sensor_np); > > + > > + return id; > > +} > > + > > +static int qoriq_tmu_calibration(struct platform_device *pdev) > > +{ > > + int i, val, len; > > + u32 range[4]; > > + const u32 *calibration; > > + struct device_node *np = pdev->dev.of_node; > > + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); > > + > > + if (of_property_read_u32_array(np, "fsl,tmu-range", range, > > 4)) { > > + dev_err(&pdev->dev, "missing calibration range.\n"); > > + return -ENODEV; > > + } > > + > > + /* Init temperature range registers */ > > + tmu_write(data, range[0], &data->regs->ttr0cr); > > + tmu_write(data, range[1], &data->regs->ttr1cr); > > + tmu_write(data, range[2], &data->regs->ttr2cr); > > + tmu_write(data, range[3], &data->regs->ttr3cr); > > + > > + calibration = of_get_property(np, "fsl,tmu-calibration", > > &len); > > + if (calibration == NULL || len % 8) { > > + dev_err(&pdev->dev, "invalid calibration data.\n"); > > + return -ENODEV; > > + } > > + > > + for (i = 0; i < len; i += 8, calibration += 2) { > > + val = of_read_number(calibration, 1); > > + tmu_write(data, val, &data->regs->ttcfgr); > > + val = of_read_number(calibration + 1, 1); > > + tmu_write(data, val, &data->regs->tscfgr); > > + } > > + > > + return 0; > > +} > > + > > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) > > +{ > > + /* Disable interrupt, using polling instead */ > > + tmu_write(data, TIER_DISABLE, &data->regs->tier); > > + > > + /* Set update_interval */ > > + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); > > + > > + /* Disable monitoring */ > > + tmu_write(data, TMR_DISABLE, &data->regs->tmr); > > +} > > + > > +static struct thermal_zone_of_device_ops tmu_tz_ops = { > > + .get_temp = tmu_get_temp, > > +}; > > + > > +static int qoriq_tmu_probe(struct platform_device *pdev) > > +{ > > + int ret; > > + const struct thermal_trip *trip; > > + struct qoriq_tmu_data *data; > > + struct device_node *np = pdev->dev.of_node; > > + u32 site = 0; > > + > > + if (!np) { > > + dev_err(&pdev->dev, "Device OF-Node is NULL"); > > + return -ENODEV; > > + } > > + > > + data = devm_kzalloc(&pdev->dev, sizeof(struct > > qoriq_tmu_data), > > + GFP_KERNEL); > > + if (!data) > > + return -ENOMEM; > > + > > + platform_set_drvdata(pdev, data); > > + > > + data->little_endian = of_property_read_bool(np, "little- > > endian"); > > + > > + data->sensor_id = qoriq_tmu_get_sensor_id(); > > + if (data->sensor_id < 0) { > > + dev_err(&pdev->dev, "Failed to get sensor id\n"); > > + ret = -ENODEV; > > + goto err_iomap; > > + } > > + > > + data->regs = of_iomap(np, 0); > > + if (!data->regs) { > > + dev_err(&pdev->dev, "Failed to get memory > > region\n"); > > + ret = -ENODEV; > > + goto err_iomap; > > + } > > + > > + qoriq_tmu_init_device(data); /* TMU initialization */ > > + > > + ret = qoriq_tmu_calibration(pdev); /* TMU calibration > > */ > > + if (ret < 0) > > + goto err_tmu; > > + > > + data->tz = thermal_zone_of_sensor_register(&pdev->dev, data- > > >sensor_id, > > + data, &tmu_tz_ops); > > + if (IS_ERR(data->tz)) { > > + ret = PTR_ERR(data->tz); > > + dev_err(&pdev->dev, > > + "Failed to register thermal zone device > > %d\n", ret); > > + goto err_tmu; > > + } > > + > > + trip = of_thermal_get_trip_points(data->tz); > > + > > + /* Enable monitoring */ > > + site |= 0x1 << (15 - data->sensor_id); > > + tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr); > > + > > + return 0; > > + > > +err_tmu: > > + iounmap(data->regs); > > + > > +err_iomap: > > + platform_set_drvdata(pdev, NULL); > > + > > + return ret; > > +} > > + > > +static int qoriq_tmu_remove(struct platform_device *pdev) > > +{ > > + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); > > + > > + thermal_zone_of_sensor_unregister(&pdev->dev, data->tz); > > + > > + /* Disable monitoring */ > > + tmu_write(data, TMR_DISABLE, &data->regs->tmr); > > + > > + iounmap(data->regs); > > + platform_set_drvdata(pdev, NULL); > > + > > + return 0; > > +} > > + > > +#ifdef CONFIG_PM_SLEEP > > +static int qoriq_tmu_suspend(struct device *dev) > > +{ > > + u32 tmr; > > + struct qoriq_tmu_data *data = dev_get_drvdata(dev); > > + > > + /* Disable monitoring */ > > + tmr = tmu_read(data, &data->regs->tmr); > > + tmr &= ~TMR_ME; > > + tmu_write(data, tmr, &data->regs->tmr); > > + > > + return 0; > > +} > > + > > +static int qoriq_tmu_resume(struct device *dev) > > +{ > > + u32 tmr; > > + struct qoriq_tmu_data *data = dev_get_drvdata(dev); > > + > > + /* Enable monitoring */ > > + tmr = tmu_read(data, &data->regs->tmr); > > + tmr |= TMR_ME; > > + tmu_write(data, tmr, &data->regs->tmr); > > + > > + return 0; > > +} > > +#endif > > + > > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, > > + qoriq_tmu_suspend, qoriq_tmu_resume); > > + > > +static const struct of_device_id qoriq_tmu_match[] = { > > + { .compatible = "fsl,qoriq-tmu", }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, qoriq_tmu_match); > > + > > +static struct platform_driver qoriq_tmu = { > > + .driver = { > > + .name = "qoriq_thermal", > > + .pm = &qoriq_tmu_pm_ops, > > + .of_match_table = qoriq_tmu_match, > > + }, > > + .probe = qoriq_tmu_probe, > > + .remove = qoriq_tmu_remove, > > +}; > > +module_platform_driver(qoriq_tmu); > > + > > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>"); > > +MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.1.0.27.g96db324 > >
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 2d702ca..56ef30d 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -195,6 +195,16 @@ config IMX_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config QORIQ_THERMAL + tristate "QorIQ Thermal Monitoring Unit" + depends on THERMAL_OF + depends on HAS_IOMEM + help + Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms. + It supports one critical trip point and one passive trip point. The + cpufreq is used as the cooling device to throttle CPUs when the + passive trip is crossed. + config SPEAR_THERMAL tristate "SPEAr thermal sensor driver" depends on PLAT_SPEAR || COMPILE_TEST diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 10b07c1..6662232 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o +obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c new file mode 100644 index 0000000..644ba52 --- /dev/null +++ b/drivers/thermal/qoriq_thermal.c @@ -0,0 +1,328 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/thermal.h> + +#include "thermal_core.h" + +#define SITES_MAX 16 + +/* + * QorIQ TMU Registers + */ +struct qoriq_tmu_site_regs { + u32 tritsr; /* Immediate Temperature Site Register */ + u32 tratsr; /* Average Temperature Site Register */ + u8 res0[0x8]; +}; + +struct qoriq_tmu_regs { + u32 tmr; /* Mode Register */ +#define TMR_DISABLE 0x0 +#define TMR_ME 0x80000000 +#define TMR_ALPF 0x0c000000 + u32 tsr; /* Status Register */ + u32 tmtmir; /* Temperature measurement interval Register */ +#define TMTMIR_DEFAULT 0x0000000f + u8 res0[0x14]; + u32 tier; /* Interrupt Enable Register */ +#define TIER_DISABLE 0x0 + u32 tidr; /* Interrupt Detect Register */ + u32 tiscr; /* Interrupt Site Capture Register */ + u32 ticscr; /* Interrupt Critical Site Capture Register */ + u8 res1[0x10]; + u32 tmhtcrh; /* High Temperature Capture Register */ + u32 tmhtcrl; /* Low Temperature Capture Register */ + u8 res2[0x8]; + u32 tmhtitr; /* High Temperature Immediate Threshold */ + u32 tmhtatr; /* High Temperature Average Threshold */ + u32 tmhtactr; /* High Temperature Average Crit Threshold */ + u8 res3[0x24]; + u32 ttcfgr; /* Temperature Configuration Register */ + u32 tscfgr; /* Sensor Configuration Register */ + u8 res4[0x78]; + struct qoriq_tmu_site_regs site[SITES_MAX]; + u8 res5[0x9f8]; + u32 ipbrr0; /* IP Block Revision Register 0 */ + u32 ipbrr1; /* IP Block Revision Register 1 */ + u8 res6[0x310]; + u32 ttr0cr; /* Temperature Range 0 Control Register */ + u32 ttr1cr; /* Temperature Range 1 Control Register */ + u32 ttr2cr; /* Temperature Range 2 Control Register */ + u32 ttr3cr; /* Temperature Range 3 Control Register */ +}; + +/* + * Thermal zone data + */ +struct qoriq_tmu_data { + struct thermal_zone_device *tz; + struct qoriq_tmu_regs __iomem *regs; + int sensor_id; + bool little_endian; +}; + +static void tmu_write(struct qoriq_tmu_data *p, u32 val, void __iomem *addr) +{ + if (p->little_endian) + iowrite32(val, addr); + else + iowrite32be(val, addr); +} + +static u32 tmu_read(struct qoriq_tmu_data *p, void __iomem *addr) +{ + if (p->little_endian) + return ioread32(addr); + else + return ioread32be(addr); +} + +static int tmu_get_temp(void *p, int *temp) +{ + u32 val; + struct qoriq_tmu_data *data = p; + + val = tmu_read(data, &data->regs->site[data->sensor_id].tritsr); + *temp = (val & 0xff) * 1000; + + return 0; +} + +static int qoriq_tmu_get_sensor_id(void) +{ + int ret, id; + struct of_phandle_args sensor_specs; + struct device_node *np, *sensor_np; + + np = of_find_node_by_name(NULL, "thermal-zones"); + if (!np) + return -ENODEV; + + sensor_np = of_get_next_child(np, NULL); + ret = of_parse_phandle_with_args(sensor_np, "thermal-sensors", + "#thermal-sensor-cells", + 0, &sensor_specs); + if (ret) { + of_node_put(np); + of_node_put(sensor_np); + return ret; + } + + if (sensor_specs.args_count >= 1) { + id = sensor_specs.args[0]; + WARN(sensor_specs.args_count > 1, + "%s: too many cells in sensor specifier %d\n", + sensor_specs.np->name, sensor_specs.args_count); + } else { + id = 0; + } + + of_node_put(np); + of_node_put(sensor_np); + + return id; +} + +static int qoriq_tmu_calibration(struct platform_device *pdev) +{ + int i, val, len; + u32 range[4]; + const u32 *calibration; + struct device_node *np = pdev->dev.of_node; + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); + + if (of_property_read_u32_array(np, "fsl,tmu-range", range, 4)) { + dev_err(&pdev->dev, "missing calibration range.\n"); + return -ENODEV; + } + + /* Init temperature range registers */ + tmu_write(data, range[0], &data->regs->ttr0cr); + tmu_write(data, range[1], &data->regs->ttr1cr); + tmu_write(data, range[2], &data->regs->ttr2cr); + tmu_write(data, range[3], &data->regs->ttr3cr); + + calibration = of_get_property(np, "fsl,tmu-calibration", &len); + if (calibration == NULL || len % 8) { + dev_err(&pdev->dev, "invalid calibration data.\n"); + return -ENODEV; + } + + for (i = 0; i < len; i += 8, calibration += 2) { + val = of_read_number(calibration, 1); + tmu_write(data, val, &data->regs->ttcfgr); + val = of_read_number(calibration + 1, 1); + tmu_write(data, val, &data->regs->tscfgr); + } + + return 0; +} + +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) +{ + /* Disable interrupt, using polling instead */ + tmu_write(data, TIER_DISABLE, &data->regs->tier); + + /* Set update_interval */ + tmu_write(data, TMTMIR_DEFAULT, &data->regs->tmtmir); + + /* Disable monitoring */ + tmu_write(data, TMR_DISABLE, &data->regs->tmr); +} + +static struct thermal_zone_of_device_ops tmu_tz_ops = { + .get_temp = tmu_get_temp, +}; + +static int qoriq_tmu_probe(struct platform_device *pdev) +{ + int ret; + const struct thermal_trip *trip; + struct qoriq_tmu_data *data; + struct device_node *np = pdev->dev.of_node; + u32 site = 0; + + if (!np) { + dev_err(&pdev->dev, "Device OF-Node is NULL"); + return -ENODEV; + } + + data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + platform_set_drvdata(pdev, data); + + data->little_endian = of_property_read_bool(np, "little-endian"); + + data->sensor_id = qoriq_tmu_get_sensor_id(); + if (data->sensor_id < 0) { + dev_err(&pdev->dev, "Failed to get sensor id\n"); + ret = -ENODEV; + goto err_iomap; + } + + data->regs = of_iomap(np, 0); + if (!data->regs) { + dev_err(&pdev->dev, "Failed to get memory region\n"); + ret = -ENODEV; + goto err_iomap; + } + + qoriq_tmu_init_device(data); /* TMU initialization */ + + ret = qoriq_tmu_calibration(pdev); /* TMU calibration */ + if (ret < 0) + goto err_tmu; + + data->tz = thermal_zone_of_sensor_register(&pdev->dev, data->sensor_id, + data, &tmu_tz_ops); + if (IS_ERR(data->tz)) { + ret = PTR_ERR(data->tz); + dev_err(&pdev->dev, + "Failed to register thermal zone device %d\n", ret); + goto err_tmu; + } + + trip = of_thermal_get_trip_points(data->tz); + + /* Enable monitoring */ + site |= 0x1 << (15 - data->sensor_id); + tmu_write(data, site | TMR_ME | TMR_ALPF, &data->regs->tmr); + + return 0; + +err_tmu: + iounmap(data->regs); + +err_iomap: + platform_set_drvdata(pdev, NULL); + + return ret; +} + +static int qoriq_tmu_remove(struct platform_device *pdev) +{ + struct qoriq_tmu_data *data = platform_get_drvdata(pdev); + + thermal_zone_of_sensor_unregister(&pdev->dev, data->tz); + + /* Disable monitoring */ + tmu_write(data, TMR_DISABLE, &data->regs->tmr); + + iounmap(data->regs); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int qoriq_tmu_suspend(struct device *dev) +{ + u32 tmr; + struct qoriq_tmu_data *data = dev_get_drvdata(dev); + + /* Disable monitoring */ + tmr = tmu_read(data, &data->regs->tmr); + tmr &= ~TMR_ME; + tmu_write(data, tmr, &data->regs->tmr); + + return 0; +} + +static int qoriq_tmu_resume(struct device *dev) +{ + u32 tmr; + struct qoriq_tmu_data *data = dev_get_drvdata(dev); + + /* Enable monitoring */ + tmr = tmu_read(data, &data->regs->tmr); + tmr |= TMR_ME; + tmu_write(data, tmr, &data->regs->tmr); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops, + qoriq_tmu_suspend, qoriq_tmu_resume); + +static const struct of_device_id qoriq_tmu_match[] = { + { .compatible = "fsl,qoriq-tmu", }, + {}, +}; +MODULE_DEVICE_TABLE(of, qoriq_tmu_match); + +static struct platform_driver qoriq_tmu = { + .driver = { + .name = "qoriq_thermal", + .pm = &qoriq_tmu_pm_ops, + .of_match_table = qoriq_tmu_match, + }, + .probe = qoriq_tmu_probe, + .remove = qoriq_tmu_remove, +}; +module_platform_driver(qoriq_tmu); + +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@nxp.com>"); +MODULE_DESCRIPTION("QorIQ Thermal Monitoring Unit driver"); +MODULE_LICENSE("GPL v2");
This driver add thermal management support by enabling TMU (Thermal Monitoring Unit) on QorIQ platform. It's based on thermal of framework: - Trip points defined in device tree. - Cpufreq as cooling device registered in qoriq cpufreq driver. Signed-off-by: Jia Hongtao <hongtao.jia@nxp.com> --- Changes of V2: * Add HAS_IOMEM dependency to fix build error on UM drivers/thermal/Kconfig | 10 ++ drivers/thermal/Makefile | 1 + drivers/thermal/qoriq_thermal.c | 328 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 339 insertions(+) create mode 100644 drivers/thermal/qoriq_thermal.c -- 2.1.0.27.g96db324