new file mode 100644
@@ -0,0 +1,163 @@
+Message unit node:
+
+For SRIO controllers that implement the message unit as part of the controller
+this node is required. For devices with RMAN this node should NOT exist. The
+node is composed of three types of sub-nodes ("fsl-srio-msg-unit",
+"fsl-srio-dbell-unit" and "fsl-srio-port-write-unit").
+
+See srio.txt for more details about generic SRIO controller details.
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio-rmu-vX.Y", "fsl,srio-rmu".
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - fsl,liodn
+ Usage: optional-but-recommended (for devices with PAMU)
+ Value type: <prop-encoded-array>
+ Definition: The logical I/O device number for the PAMU (IOMMU) to be
+ correctly configured for SRIO accesses. The property should
+ not exist on devices that do not support PAMU.
+
+ The LIODN value is associated with all RMU transactions
+ (msg-unit, doorbell, port-write).
+
+Sub-Nodes for RMU: The RMU node is composed of multiple sub-nodes that
+correspond to the actual sub-controllers in the RMU. The manual for a given
+SoC will detail which and how many of these sub-controllers are implemented.
+
+Message Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio-msg-unit-vX.Y", "fsl,srio-msg-unit".
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A pair of IRQs are specified in this property. The first
+ element is associated with the transmit (TX) interrupt and the
+ second element is associated with the receive (RX) interrupt.
+
+Doorbell Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include:
+ "fsl,srio-dbell-unit-vX.Y", "fsl,srio-dbell-unit"
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A pair of IRQs are specified in this property. The first
+ element is associated with the transmit (TX) interrupt and the
+ second element is associated with the receive (RX) interrupt.
+
+Port-Write Unit:
+
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include:
+ "fsl,srio-port-write-unit-vX.Y", "fsl,srio-port-write-unit"
+
+ The version X.Y should match the general SRIO controller's IP Block
+ revision register's Major(X) and Minor (Y) value.
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers for message units
+ and doorbell units.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A single IRQ that handles port-write conditions is
+ specified by this property. (Typically shared with error).
+
+ Note: All other standard properties (see the ePAPR) are allowed
+ but are optional.
+
+Example:
+ rmu: rmu@d3000 {
+ compatible = "fsl,srio-rmu";
+ reg = <0xd3000 0x400>;
+ ranges = <0x0 0xd3000 0x400>;
+ fsl,liodn = <0xc8>;
+
+ message-unit@0 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x0 0x100>;
+ interrupts = <
+ 60 2 0 0 /* msg1_tx_irq */
+ 61 2 0 0>;/* msg1_rx_irq */
+ };
+ message-unit@100 {
+ compatible = "fsl,srio-msg-unit";
+ reg = <0x100 0x100>;
+ interrupts = <
+ 62 2 0 0 /* msg2_tx_irq */
+ 63 2 0 0>;/* msg2_rx_irq */
+ };
+ doorbell-unit@400 {
+ compatible = "fsl,srio-dbell-unit";
+ reg = <0x400 0x80>;
+ interrupts = <
+ 56 2 0 0 /* bell_outb_irq */
+ 57 2 0 0>;/* bell_inb_irq */
+ };
+ port-write-unit@4e0 {
+ compatible = "fsl,srio-port-write-unit";
+ reg = <0x4e0 0x20>;
+ interrupts = <16 2 1 11>;
+ };
+ };
new file mode 100644
@@ -0,0 +1,103 @@
+* Freescale Serial RapidIO (SRIO) Controller
+
+RapidIO port node:
+Properties:
+ - compatible
+ Usage: required
+ Value type: <string>
+ Definition: Must include "fsl,srio" for IP blocks with IP Block
+ Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
+
+ Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
+ version in IP Block Revision Register and Y is Minor version. If this
+ compatiable is provided it should be ordered before "fsl,srio".
+
+ - reg
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies the physical address and
+ length of the SRIO configuration registers. The size should
+ be set to 0x11000.
+
+ - interrupts
+ Usage: required
+ Value type: <prop_encoded-array>
+ Definition: Specifies the interrupts generated by this device. The
+ value of the interrupts property consists of one interrupt
+ specifier. The format of the specifier is defined by the
+ binding document describing the node's interrupt parent.
+
+ A single IRQ that handles error conditions is specified by this
+ property. (Typically shared with port-write).
+
+ - fsl,srio-rmu-handle:
+ Usage: required if rmu node is defined
+ Value type: <phandle>
+ Definition: A single <phandle> value that points to the RMU.
+ (See srio-rmu.txt for more details on RMU node binding)
+
+Port Child Nodes: There should a port child node for each port that exists in
+the controller. The ports are numbered starting at one (1) and should have
+the following properties:
+
+ - cell-index
+ Usage: required
+ Value type: <u32>
+ Definition: A standard property. Matches the port id.
+
+ - ranges
+ Usage: required if local access windows preset
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Utilized to describe the memory mapped
+ IO space utilized by the controller. This corresponds to the
+ setting of the local access windows that are targeted to this
+ SRIO port.
+
+ - fsl,liodn
+ Usage: optional-but-recommended (for devices with PAMU)
+ Value type: <prop-encoded-array>
+ Definition: The logical I/O device number for the PAMU (IOMMU) to be
+ correctly configured for SRIO accesses. The property should
+ not exist on devices that do not support PAMU.
+
+ For HW (ie, the P4080) that only supports a LIODN for both
+ memory and maintenance transactions then a single LIODN is
+ represented in the property for both transactions.
+
+ For HW (ie, the P304x/P5020, etc) that supports an LIODN for
+ memory transactions and a unique LIODN for maintenance
+ transactions then a pair of LIODNs are represented in the
+ property. Within the pair, the first element represents the
+ LIODN associated with memory transactions and the second element
+ represents the LIODN associated with maintenance transactions
+ for the port.
+
+Note: All other standard properties (see ePAPR) are allowed but are optional.
+
+Example:
+
+ rapidio: rapidio@ffe0c0000 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0xf 0xfe0c0000 0 0x11000>;
+ compatible = "fsl,srio";
+ interrupts = <16 2 1 11>; /* err_irq */
+ fsl,srio-rmu-handle = <&rmu>;
+ ranges;
+
+ port1 {
+ cell-index = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,liodn = <34>;
+ ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+ };
+
+ port2 {
+ cell-index = <2>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ fsl,liodn = <48>;
+ ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+ };
+ };