diff mbox

[1/2,v5] fs_enet/mii-fec.c: fix MII speed calculation

Message ID 1247833628-15952-1-git-send-email-wd@denx.de
State Not Applicable
Headers show

Commit Message

Wolfgang Denk July 17, 2009, 12:27 p.m. UTC
The MII speed calculation was based on the CPU clock (ppc_proc_freq),
but for MPC512x we must use the bus clock instead.

This patch makes it use the correct clock and makes sure we don't
clobber reserved bits in the MII_SPEED register.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: <netdev@vger.kernel.org>
---
v5: - fix divider so we really use 2.5 MHz (instead of 1.25)
    - use maximum divider in case MPC512x IPS clock is unknown

 drivers/net/fs_enet/mii-fec.c |   37 +++++++++++++++++++++++++++++++++----
 1 files changed, 33 insertions(+), 4 deletions(-)

Comments

Grant Likely July 17, 2009, 2:41 p.m. UTC | #1
On Fri, Jul 17, 2009 at 6:27 AM, Wolfgang Denk<wd@denx.de> wrote:
> The MII speed calculation was based on the CPU clock (ppc_proc_freq),
> but for MPC512x we must use the bus clock instead.
>
> This patch makes it use the correct clock and makes sure we don't
> clobber reserved bits in the MII_SPEED register.
>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: Kumar Gala <galak@kernel.crashing.org>
> Cc: <netdev@vger.kernel.org>

Acked-by: Grant Likely <grant.likely@secretlab.ca>

David, this isn't a critical bug fix or a regression, so I think it
should be merged for -next.

g.

> ---
> v5: - fix divider so we really use 2.5 MHz (instead of 1.25)
>    - use maximum divider in case MPC512x IPS clock is unknown
>
>  drivers/net/fs_enet/mii-fec.c |   37 +++++++++++++++++++++++++++++++++----
>  1 files changed, 33 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
> index 75a0999..5176986 100644
> --- a/drivers/net/fs_enet/mii-fec.c
> +++ b/drivers/net/fs_enet/mii-fec.c
> @@ -36,6 +36,7 @@
>  #include <asm/pgtable.h>
>  #include <asm/irq.h>
>  #include <asm/uaccess.h>
> +#include <asm/mpc5xxx.h>
>
>  #include "fs_enet.h"
>  #include "fec.h"
> @@ -103,11 +104,11 @@ static int fs_enet_fec_mii_reset(struct mii_bus *bus)
>  static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
>                                         const struct of_device_id *match)
>  {
> -       struct device_node *np = NULL;
>        struct resource res;
>        struct mii_bus *new_bus;
>        struct fec_info *fec;
> -       int ret = -ENOMEM, i;
> +       int (*get_bus_freq)(struct device_node *) = match->data;
> +       int ret = -ENOMEM, clock, speed;
>
>        new_bus = mdiobus_alloc();
>        if (!new_bus)
> @@ -133,13 +134,35 @@ static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
>        if (!fec->fecp)
>                goto out_fec;
>
> -       fec->mii_speed = ((ppc_proc_freq + 4999999) / 5000000) << 1;
> +       if (get_bus_freq) {
> +               clock = get_bus_freq(ofdev->node);
> +               if (!clock) {
> +                       /* Use maximum divider if clock is unknown */
> +                       dev_warn(&ofdev->dev, "could not determine IPS clock\n");
> +                       clock = 0x3F * 5000000;
> +               }
> +       } else
> +               clock = ppc_proc_freq;
> +
> +       /*
> +        * Scale for a MII clock <= 2.5 MHz
> +        * Note that only 6 bits (25:30) are available for MII speed.
> +        */
> +       speed = (clock + 4999999) / 5000000;
> +       if (speed > 0x3F) {
> +               speed = 0x3F;
> +               dev_err(&ofdev->dev,
> +                       "MII clock (%d Hz) exceeds max (2.5 MHz)\n",
> +                       clock / speed);
> +       }
> +
> +       fec->mii_speed = speed << 1;
>
>        setbits32(&fec->fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
>        setbits32(&fec->fecp->fec_ecntrl, FEC_ECNTRL_PINMUX |
>                                          FEC_ECNTRL_ETHER_EN);
>        out_be32(&fec->fecp->fec_ievent, FEC_ENET_MII);
> -       out_be32(&fec->fecp->fec_mii_speed, fec->mii_speed);
> +       clrsetbits_be32(&fec->fecp->fec_mii_speed, 0x7E, fec->mii_speed);
>
>        new_bus->phy_mask = ~0;
>        new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
> @@ -188,6 +211,12 @@ static struct of_device_id fs_enet_mdio_fec_match[] = {
>        {
>                .compatible = "fsl,pq1-fec-mdio",
>        },
> +#if defined(CONFIG_PPC_MPC512x)
> +       {
> +               .compatible = "fsl,mpc5121-fec-mdio",
> +               .data = mpc5xxx_get_bus_frequency,
> +       },
> +#endif
>        {},
>  };
>
> --
> 1.6.0.6
>
>
David Miller July 17, 2009, 4:21 p.m. UTC | #2
From: Grant Likely <grant.likely@secretlab.ca>
Date: Fri, 17 Jul 2009 08:41:08 -0600

> David, this isn't a critical bug fix or a regression, so I think it
> should be merged for -next.

Ok.
David Miller July 17, 2009, 4:48 p.m. UTC | #3
From: Grant Likely <grant.likely@secretlab.ca>
Date: Fri, 17 Jul 2009 08:41:08 -0600

> On Fri, Jul 17, 2009 at 6:27 AM, Wolfgang Denk<wd@denx.de> wrote:
>> The MII speed calculation was based on the CPU clock (ppc_proc_freq),
>> but for MPC512x we must use the bus clock instead.
>>
>> This patch makes it use the correct clock and makes sure we don't
>> clobber reserved bits in the MII_SPEED register.
>>
>> Signed-off-by: Wolfgang Denk <wd@denx.de>
>> Cc: Grant Likely <grant.likely@secretlab.ca>
>> Cc: Kumar Gala <galak@kernel.crashing.org>
>> Cc: <netdev@vger.kernel.org>
> 
> Acked-by: Grant Likely <grant.likely@secretlab.ca>

Applied to net-next-2.6
diff mbox

Patch

diff --git a/drivers/net/fs_enet/mii-fec.c b/drivers/net/fs_enet/mii-fec.c
index 75a0999..5176986 100644
--- a/drivers/net/fs_enet/mii-fec.c
+++ b/drivers/net/fs_enet/mii-fec.c
@@ -36,6 +36,7 @@ 
 #include <asm/pgtable.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
+#include <asm/mpc5xxx.h>
 
 #include "fs_enet.h"
 #include "fec.h"
@@ -103,11 +104,11 @@  static int fs_enet_fec_mii_reset(struct mii_bus *bus)
 static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
-	struct device_node *np = NULL;
 	struct resource res;
 	struct mii_bus *new_bus;
 	struct fec_info *fec;
-	int ret = -ENOMEM, i;
+	int (*get_bus_freq)(struct device_node *) = match->data;
+	int ret = -ENOMEM, clock, speed;
 
 	new_bus = mdiobus_alloc();
 	if (!new_bus)
@@ -133,13 +134,35 @@  static int __devinit fs_enet_mdio_probe(struct of_device *ofdev,
 	if (!fec->fecp)
 		goto out_fec;
 
-	fec->mii_speed = ((ppc_proc_freq + 4999999) / 5000000) << 1;
+	if (get_bus_freq) {
+		clock = get_bus_freq(ofdev->node);
+		if (!clock) {
+	 		/* Use maximum divider if clock is unknown */
+			dev_warn(&ofdev->dev, "could not determine IPS clock\n");
+			clock = 0x3F * 5000000;
+		}
+	} else
+		clock = ppc_proc_freq;
+
+	/*
+	 * Scale for a MII clock <= 2.5 MHz
+	 * Note that only 6 bits (25:30) are available for MII speed.
+	 */
+	speed = (clock + 4999999) / 5000000;
+	if (speed > 0x3F) {
+		speed = 0x3F;
+		dev_err(&ofdev->dev,
+			"MII clock (%d Hz) exceeds max (2.5 MHz)\n",
+			clock / speed);
+	}
+
+	fec->mii_speed = speed << 1;
 
 	setbits32(&fec->fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
 	setbits32(&fec->fecp->fec_ecntrl, FEC_ECNTRL_PINMUX |
 	                                  FEC_ECNTRL_ETHER_EN);
 	out_be32(&fec->fecp->fec_ievent, FEC_ENET_MII);
-	out_be32(&fec->fecp->fec_mii_speed, fec->mii_speed);
+	clrsetbits_be32(&fec->fecp->fec_mii_speed, 0x7E, fec->mii_speed);
 
 	new_bus->phy_mask = ~0;
 	new_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
@@ -188,6 +211,12 @@  static struct of_device_id fs_enet_mdio_fec_match[] = {
 	{
 		.compatible = "fsl,pq1-fec-mdio",
 	},
+#if defined(CONFIG_PPC_MPC512x)
+	{
+		.compatible = "fsl,mpc5121-fec-mdio",
+		.data = mpc5xxx_get_bus_frequency,
+	},
+#endif
 	{},
 };