new file mode 100644
@@ -0,0 +1,514 @@
+/*
+ * MPC8569E MDS Device Tree Source
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MPC8569EMDS";
+ compatible = "fsl,MPC8569EMDS";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8569@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xe0005000 0 0x1000>;
+ interrupt = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0xfe000000 0x02000000
+ 0x1 0x0 0xf8000000 0x00008000
+ 0x2 0x0 0xf0000000 0x04000000
+ 0x4 0x0 0xf8008000 0x00008000
+ 0x5 0x0 0xf8010000 0x00008000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x02000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ bcsr@1,0 {
+ compatible = "fsl,mpc8569mds-bcsr";
+ reg = <1 0 0x8000>;
+ };
+
+ pib@4,0 {
+ compatible = "fsl,mpc8569mds-pib";
+ reg = <4 0 0x8000>;
+ };
+
+ pib@5,0 {
+ compatible = "fsl,mpc8569mds-pib";
+ reg = <5 0 0x8000>;
+ };
+ };
+
+ soc@e0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8569-immr", "simple-bus";
+ ranges = <0x0 0xe0000000 0x100000>;
+ reg = <0xe0000000 0x1000>;
+ bus-frequency = <0>;
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <10>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8569-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8569-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8569-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8569-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8569-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8569-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8569-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ par_io@e0100 {
+ reg = <0xe0100 0x100>;
+ device_type = "par_io";
+ num-ports = <7>;
+
+ pio1: ucc_pin@01 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
+ 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
+ 0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */
+ 0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */
+ 0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */
+ 0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
+ 0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */
+ 0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */
+ 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
+ 0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
+ 0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
+ 0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */
+ 0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */
+ 0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */
+ };
+
+ pio2: ucc_pin@02 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
+ 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
+ 0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */
+ 0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */
+ 0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */
+ 0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */
+ 0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */
+ 0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */
+ 0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */
+ 0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */
+ 0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */
+ 0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */
+ 0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */
+ 0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */
+ };
+
+ pio3: ucc_pin@03 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
+ 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
+ 0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */
+ 0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */
+ 0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */
+ 0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */
+ 0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */
+ 0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */
+ 0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */
+ 0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */
+ 0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */
+ 0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */
+ 0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */
+ 0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */
+ };
+
+ pio4: ucc_pin@04 {
+ pio-map = <
+ /* port pin dir open_drain assignment has_irq */
+ 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
+ 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
+ 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
+ 0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */
+ 0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */
+ 0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */
+ 0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */
+ 0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */
+ 0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */
+ 0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */
+ 0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */
+ 0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */
+ 0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */
+ 0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */
+ 0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */
+ };
+ };
+ };
+
+ qe@e0080000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "qe";
+ compatible = "fsl,qe";
+ ranges = <0x0 0xe0080000 0x40000>;
+ reg = <0xe0080000 0x480>;
+ brg-frequency = <0>;
+ bus-frequency = <0>;
+ fsl,qe-num-riscs = <4>;
+ fsl,qe-num-snums = <46>;
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <46 2 46 2>; //high:30 low:30
+ interrupt-parent = <&mpic>;
+ };
+
+ spi@4c0 {
+ cell-index = <0>;
+ compatible = "fsl,spi";
+ reg = <0x4c0 0x40>;
+ interrupts = <2>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu";
+ };
+
+ spi@500 {
+ cell-index = <1>;
+ compatible = "fsl,spi";
+ reg = <0x500 0x40>;
+ interrupts = <1>;
+ interrupt-parent = <&qeic>;
+ mode = "cpu";
+ };
+
+ enet0: ucc@2000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <1>;
+ reg = <0x2000 0x200>;
+ interrupts = <32>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk12";
+ pio-handle = <&pio1>;
+ phy-handle = <&qe_phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@2120 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2120 0x18>;
+ compatible = "fsl,ucc-mdio";
+
+ qe_phy0: ethernet-phy@07 {
+ interrupt-parent = <&mpic>;
+ interrupts = <1 1>;
+ reg = <0x7>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy1: ethernet-phy@01 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy2: ethernet-phy@02 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x2>;
+ device_type = "ethernet-phy";
+ };
+ qe_phy3: ethernet-phy@03 {
+ interrupt-parent = <&mpic>;
+ interrupts = <4 1>;
+ reg = <0x3>;
+ device_type = "ethernet-phy";
+ };
+ };
+
+ enet2: ucc@2200 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <3>;
+ reg = <0x2200 0x200>;
+ interrupts = <34>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk12";
+ pio-handle = <&pio3>;
+ phy-handle = <&qe_phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ucc@3000 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <2>;
+ reg = <0x3000 0x200>;
+ interrupts = <33>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk17";
+ pio-handle = <&pio2>;
+ phy-handle = <&qe_phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet3: ucc@3200 {
+ device_type = "network";
+ compatible = "ucc_geth";
+ cell-index = <4>;
+ reg = <0x3200 0x200>;
+ interrupts = <35>;
+ interrupt-parent = <&qeic>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ rx-clock-name = "none";
+ tx-clock-name = "clk17";
+ pio-handle = <&pio4>;
+ phy-handle = <&qe_phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ muram@10000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,qe-muram", "fsl,cpm-muram";
+ ranges = <0x0 0x10000 0x20000>;
+
+ data-only@0 {
+ compatible = "fsl,qe-muram-data",
+ "fsl,cpm-muram-data";
+ reg = <0x0 0x20000>;
+ };
+ };
+
+ };
+
+ /* PCI Express */
+ pci1: pcie@e000a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xe000a000 0x1000>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 (PEX) */
+ 00000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 00000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 00000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+ 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+ clock-frequency = <33333333>;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x10000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x800000>;
+ };
+ };
+};
@@ -259,6 +259,7 @@ static int __init board_fixups(void)
return 0;
}
machine_arch_initcall(mpc8568_mds, board_fixups);
+machine_arch_initcall(mpc8569_mds, board_fixups);
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
@@ -278,6 +279,7 @@ static int __init mpc85xx_publish_devices(void)
return 0;
}
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
+machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
static void __init mpc85xx_mds_pic_init(void)
{
@@ -335,3 +337,24 @@ define_machine(mpc8568_mds) {
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
+
+static int __init mpc8569_mds_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
+}
+
+define_machine(mpc8569_mds) {
+ .name = "MPC8569 MDS",
+ .probe = mpc8569_mds_probe,
+ .setup_arch = mpc85xx_mds_setup_arch,
+ .init_IRQ = mpc85xx_mds_pic_init,
+ .get_irq = mpic_get_irq,
+ .restart = fsl_rstcr_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+#ifdef CONFIG_PCI
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+#endif
+};
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> --- v2 change: rename "num-riscs" to "fsl,qe-num-riscs", and "num-snums" to "fsl,qe-num-snums". arch/powerpc/boot/dts/mpc8569mds.dts | 514 +++++++++++++++++++++++++++++ arch/powerpc/platforms/85xx/mpc85xx_mds.c | 23 ++ 2 files changed, 537 insertions(+), 0 deletions(-) create mode 100644 arch/powerpc/boot/dts/mpc8569mds.dts