diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index e0dbd38..2690946 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -167,4 +167,13 @@ config EDAC_CELL
 	  Cell Broadband Engine internal memory controller
 	  on platform without a hypervisor
 
+config EDAC_PPC4XX
+	tristate "PPC4xx IBM DDR2 Memory Controller"
+	depends on EDAC_MM_EDAC && 4xx
+	help
+	  This enables support for EDAC on the ECC memory used
+	  with the IBM DDR2 memory controller found in various
+	  PowerPC 4xx embedded processors such as the 405EX[r],
+	  440SP, 440SPe, 460EX,460GT and 460SX.
+
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 62c2d9b..de8d4c1 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -33,4 +33,4 @@ obj-$(CONFIG_EDAC_PASEMI)		+= pasemi_edac.o
 obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac.o
 obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o
 obj-$(CONFIG_EDAC_CELL)			+= cell_edac.o
-
+obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o
diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c
new file mode 100644
index 0000000..493c273
--- /dev/null
+++ b/drivers/edac/ppc4xx_edac.c
@@ -0,0 +1,1333 @@
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ *   Grant Erickson <gerickson@nuovations.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/types.h>
+
+#include <asm/dcr.h>
+
+#include "edac_core.h"
+#include "ppc4xx_edac.h"
+
+/*
+ * This file implements a driver for monitoring and handling events
+ * associated with the IMB DDR2 ECC controller found in the AMCC/IBM
+ * 405EX[r], 440SP, 440SPe, 460EX, 460GT and 460SX.
+ *
+ * As realized in the 405EX[r], this controller features:
+ *
+ *   - Support for registered- and non-registered DDR1 and DDR2 memory.
+ *   - 32-bit or 16-bit memory interface with optional ECC.
+ *
+ *     o ECC support includes:
+ *
+ *       - 4-bit SEC/DED
+ *       - Aligned-nibble error detect
+ *       - Bypass mode
+ *
+ *   - Two (2) memory banks/ranks.
+ *   - Up to 1 GiB per bank/rank in 32-bit mode and up to 512 MiB per
+ *     bank/rank in 16-bit mode.
+ *
+ * As realized in the 440SP and 440SPe, this controller changes/adds:
+ *
+ *   - 64-bit or 32-bit memory interface with optional ECC.
+ *
+ *     o ECC support includes:
+ *
+ *       - 8-bit SEC/DED
+ *       - Aligned-nibble error detect
+ *       - Bypass mode
+ *
+ *   - Up to 4 GiB per bank/rank in 64-bit mode and up to 2 GiB
+ *     per bank/rank in 32-bit mode.
+ *
+ * As realized in the 460EX and 460GT, this controller changes/adds:
+ *
+ *   - 64-bit or 32-bit memory interface with optional ECC.
+ *
+ *     o ECC support includes:
+ *
+ *       - 8-bit SEC/DED
+ *       - Aligned-nibble error detect
+ *       - Bypass mode
+ *
+ *   - Four (4) memory banks/ranks.
+ *   - Up to 16 GiB per bank/rank in 64-bit mode and up to 8 GiB
+ *     per bank/rank in 32-bit mode.
+ *
+ * At present, this driver has ONLY been tested against the controller
+ * realization in the 405EX[r] on the AMCC Kilauea and Haleakala
+ * boards (256 MiB w/o ECC memory soldered onto the board) and a
+ * proprietary board based on those designs (128 MiB ECC memory, also
+ * soldered onto the board).
+ *
+ * Dynamic feature detection and handling needs to be added for the
+ * other realizations of this controller listed above.
+ *
+ * Eventually, this driver will likely be adapted to the above variant
+ * realizations of this controller as well as broken apart to handle
+ * the other known ECC-capable controllers prevalent in other 4xx
+ * processors:
+ *
+ *   - IBM SDRAM (405GP, 405CR and 405EP)
+ *   - IBM DDR1 (440GP, 440GX, 440EP and 440GR)
+ *   - Denali DDR1/DDR2 (440EPX and 440GRX)
+ *
+ * Unfortunately, correctable errors report nothing more than the
+ * beat/cycle and byte/lane the correction occurred on and the check
+ * bit group that covered the error.
+ *
+ * In contrast, uncorrectable errors also report the failing address,
+ * the bus master and the transaction direction (i.e. read or write)
+ *
+ * Regardless of whether the error is a CE or a UE, we report the
+ * following pieces of information in the driver-unique message to the
+ * EDAC subsystem:
+ *
+ *   - Device tree path
+ *   - Bank(s)
+ *   - Check bit error group
+ *   - Beat(s)/lane(s)
+ */
+
+/* Preprocessor Definitions */
+
+#define	EDAC_OPSTATE_INT_STR		"interrupt"
+#define	EDAC_OPSTATE_POLL_STR		"polled"
+#define EDAC_OPSTATE_UNKNOWN_STR	"unknown"
+
+#define PPC4XX_EDAC_MODULE_NAME		"ppc4xx_edac"
+#define PPC4XX_EDAC_MODULE_REVISION	" v1.0.0 " __DATE__
+
+#define	PPC4XX_EDAC_MESSAGE_SIZE	256
+
+/*
+ * Kernel logging without an EDAC instance
+ */
+#define	ppc4xx_edac_printk(level, fmt, arg...) \
+	edac_printk(level, "PPC4xx MC", fmt, ##arg)
+
+#define ppc4xx_edac_debug(fmt, arg...) \
+	ppc4xx_edac_printk(KERN_DEBUG, fmt, ##arg)
+#define ppc4xx_edac_info(fmt, arg...) \
+	ppc4xx_edac_printk(KERN_INFO, fmt, ##arg)
+#define ppc4xx_edac_notice(fmt, arg...) \
+	ppc4xx_edac_printk(KERN_NOTICE, fmt, ##arg)
+#define ppc4xx_edac_warning(fmt, arg...) \
+	ppc4xx_edac_printk(KERN_WARNING, fmt, ##arg)
+#define ppc4xx_edac_err(fmt, arg...) \
+	ppc4xx_edac_printk(KERN_ERR, fmt, ##arg)
+
+/*
+ * Kernel logging with an EDAC instance
+ */
+#define ppc4xx_edac_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "PPC4xx", fmt, ##arg)
+
+#define ppc4xx_edac_mc_debug(mci, fmt, arg...) \
+	ppc4xx_edac_mc_printk(mci, KERN_DEBUG, fmt, ##arg)
+#define ppc4xx_edac_mc_info(mci, fmt, arg...) \
+	ppc4xx_edac_mc_printk(mci, KERN_INFO, fmt, ##arg)
+#define ppc4xx_edac_mc_notice(mci, fmt, arg...) \
+	ppc4xx_edac_mc_printk(mci, KERN_NOTICE, fmt, ##arg)
+#define ppc4xx_edac_mc_warning(mci, fmt, arg...) \
+	ppc4xx_edac_mc_printk(mci, KERN_WARNING, fmt, ##arg)
+#define ppc4xx_edac_mc_err(mci, fmt, arg...) \
+	ppc4xx_edac_mc_printk(mci, KERN_ERR, fmt, ##arg)
+
+/*
+ * Convenience macros to support indirect DCR read and write access to
+ * the SDRAM controller registers.
+ *
+ * TODO: If in the future the indirect address and data windows for
+ * this controller are not the same across realizations, the windows
+ * will have to be read from the device tree and these mnemonic
+ * accessors will have to become programmatic in a manner similar to
+ * the existing dcr_{map,unmap,read,write} functions.
+ */
+#define mfsdram(reg)			mfdcri(SDRAM0, SDRAM_ ## reg)
+#define mtsdram(reg, value)		mtdcri(SDRAM0, SDRAM_ ## reg, value)
+
+/*
+ * Macros to convert bank configuration size enumerations into MiB and
+ * page values.
+ */
+#define	SDRAM_MBCF_SZ_MiB_MIN		4
+#define SDRAM_MBCF_SZ_TO_MiB(n)		(SDRAM_MBCF_SZ_MiB_MIN \
+					 << (SDRAM_MBCF_SZ_DECODE(n)))
+#define SDRAM_MBCF_SZ_TO_PAGES(n)	(SDRAM_MBCF_SZ_MiB_MIN \
+					 << (20 - PAGE_SHIFT + \
+					     SDRAM_MBCF_SZ_DECODE(n)))
+
+/*
+ * Device tree interrupt indices
+ */
+#define INTMAP_ECCDED_INDEX		0	/* Double-bit Error Detect */
+#define	INTMAP_ECCSEC_INDEX		1	/* Single-bit Error Correct */
+
+/* Type Definitions */
+
+/*
+ * PPC4xx SDRAM memory controller private instance data
+ */
+struct ppc4xx_edac_pdata {
+	struct {
+		int sec;	/* Single-bit correctable error IRQ assigned */
+		int ded;	/* Double-bit detectable error IRQ assigned */
+	} irqs;
+};
+
+/*
+ * Various status data gathered and manipulated when checking and
+ * reporting ECC status.
+ */
+struct ppc4xx_ecc_status {
+	u32 ecces;
+	u32 besr;
+	u32 bearh;
+	u32 bearl;
+	u32 wmirq;
+};
+
+/* Function Prototypes */
+
+static int ppc4xx_edac_probe(struct of_device *device,
+			     const struct of_device_id *device_id);
+static int ppc4xx_edac_remove(struct of_device *device);
+
+/* Global Variables */
+
+/*
+ * Device tree node type and compatible tuples this driver can match
+ * on.
+ */
+static struct of_device_id ppc4xx_edac_match[] = {
+	{
+		.type		= "memory-controller",
+		.compatible	= "ibm,sdram-4xx-ddr2"
+	},
+	{ }
+};
+
+static struct of_platform_driver ppc4xx_edac_driver = {
+	.match_table		= ppc4xx_edac_match,
+	.probe			= ppc4xx_edac_probe,
+	.remove			= ppc4xx_edac_remove,
+	.driver			= {
+		.owner	= THIS_MODULE,
+		.name	= PPC4XX_EDAC_MODULE_NAME
+	}
+};
+
+/*
+ * TODO: The row and channel parameters likely need to be dynamically
+ * set based on the aforementioned variant controller realizations.
+ */
+static const unsigned ppc4xx_edac_nr_csrows = 2;
+static const unsigned ppc4xx_edac_nr_chans = 1;
+
+/*
+ * Strings associated with PLB master IDs capable of being posted in
+ * SDRAM_BESR or SDRAM_WMIRQ on uncorrectable ECC errors.
+ */
+static const char * const ppc4xx_plb_masters[9] = {
+	[SDRAM_PLB_M0ID_ICU]	= "ICU",
+	[SDRAM_PLB_M0ID_PCIE0]	= "PCI-E 0",
+	[SDRAM_PLB_M0ID_PCIE1]	= "PCI-E 1",
+	[SDRAM_PLB_M0ID_DMA]	= "DMA",
+	[SDRAM_PLB_M0ID_DCU]	= "DCU",
+	[SDRAM_PLB_M0ID_OPB]	= "OPB",
+	[SDRAM_PLB_M0ID_MAL]	= "MAL",
+	[SDRAM_PLB_M0ID_SEC]	= "SEC",
+	[SDRAM_PLB_M0ID_AHB]	= "AHB"
+};
+
+/**
+ * This routine determines whether the specified bank has an ECC
+ * error.
+ *
+ * @param status A pointer to the ECC status structure to check for an
+ * ECC bank error.
+ * @param bank The bank to check for an ECC error.
+ *
+ * @return True if the specified bank has an ECC error; otherwise,
+ * false.
+ */
+static bool
+ppc4xx_edac_check_bank_error(const struct ppc4xx_ecc_status *status,
+			     unsigned int bank)
+{
+	switch (bank) {
+
+	case 0:		return (status->ecces & SDRAM_ECCES_BK0ER);
+	case 1:		return (status->ecces & SDRAM_ECCES_BK1ER);
+	default:	return false;
+
+	}
+}
+
+/**
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECCESS[BKNER]
+ * field of the specified ECC status.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the bank message being generated.
+ * @param status A pointer to the ECC status structure to generate the
+ * message from.
+ * @param buffer A pointer to the buffer in which to generate the
+ * message.
+ * @param size The size, in bytes, of space available in buffer.
+ *
+ * @return The number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_bank_message(const struct mem_ctl_info *mci,
+				  const struct ppc4xx_ecc_status *status,
+				  char *buffer,
+				  size_t size)
+{
+	int n, total = 0;
+	size_t row, rows;
+
+	n = snprintf(buffer, size, "%s: Banks: ", mci->dev_name);
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+	for (rows = 0, row = 0; row < mci->nr_csrows; row++)
+		if (ppc4xx_edac_check_bank_error(status, row)) {
+			    n = snprintf(buffer, size,
+					 "%s%d",
+					 (rows++ ? ", " : ""), row);
+
+		    if (n < 0 || n >= size)
+			    goto fail;
+
+		    buffer += n;
+		    size -= n;
+		    total += n;
+		}
+
+	n = snprintf(buffer, size, "%s; ", rows ? "" : "None");
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+ fail:
+	return total;
+}
+
+/**
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECCESS[CKBER]
+ * field of the specified ECC status.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the checkbit message being generated.
+ * @param status A pointer to the ECC status structure to generate the
+ * message from.
+ * @param buffer A pointer to the buffer in which to generate the
+ * message.
+ * @param size The size, in bytes, of space available in buffer.
+ *
+ * @return The number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_checkbit_message(const struct mem_ctl_info *mci,
+				      const struct ppc4xx_ecc_status *status,
+				      char *buffer,
+				      size_t size)
+{
+	const char *ckber = NULL;
+
+	switch (status->ecces & SDRAM_ECCES_CKBER_MASK) {
+
+	case SDRAM_ECCES_CKBER_NONE:
+		ckber = "None";
+		break;
+
+	case SDRAM_ECCES_CKBER_32_ECC_0_3:
+		ckber = "ECC0:3";
+		break;
+
+	case SDRAM_ECCES_CKBER_32_ECC_4_8:
+		switch (mfsdram(MCOPT1) & SDRAM_MCOPT1_WDTH_MASK) {
+
+		case SDRAM_MCOPT1_WDTH_16:
+			ckber = "ECC0:3";
+			break;
+
+		case SDRAM_MCOPT1_WDTH_32:
+			ckber = "ECC4:8";
+			break;
+
+		default:
+			ckber = "Unknown";
+			break;
+
+		}
+		break;
+
+	case SDRAM_ECCES_CKBER_32_ECC_0_8:
+		ckber = "ECC0:8";
+		break;
+
+	default:
+		ckber = "Unknown";
+		break;
+
+	}
+
+	return snprintf(buffer, size, "Checkbit Error: %s", ckber);
+}
+
+/**
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECCESS[BNCE]
+ * field of the specified ECC status.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the byte lane message being generated.
+ * @param status A pointer to the ECC status structure to generate the
+ * message from.
+ * @param buffer A pointer to the buffer in which to generate the
+ * message.
+ * @param size The size, in bytes, of space available in buffer.
+ *
+ * @return The number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_lane_message(const struct mem_ctl_info *mci,
+				  const struct ppc4xx_ecc_status *status,
+				  char *buffer,
+				  size_t size)
+{
+	int n, total = 0;
+	size_t lane, lanes;
+	const unsigned int first_lane = 0;
+	const unsigned int lane_count = 16;
+
+	n = snprintf(buffer, size, "; Byte Lane Errors: ");
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+	for (lanes = 0, lane = first_lane; lane < lane_count; lane++) {
+		if ((status->ecces & SDRAM_ECCES_BNCE_ENCODE(lane)) != 0) {
+			n = snprintf(buffer, size,
+				     "%s%d",
+				     (lanes++ ? ", " : ""), lane);
+
+			if (n < 0 || n >= size)
+				goto fail;
+
+			buffer += n;
+			size -= n;
+			total += n;
+		}
+	}
+
+	n = snprintf(buffer, size, "%s; ", lanes ? "" : "None");
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+ fail:
+	return total;
+}
+
+/**
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the ECCESS register of
+ * the specified ECC status.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the ECCES message being generated.
+ * @param status A pointer to the ECC status structure to generate the
+ * message from.
+ * @param buffer A pointer to the buffer in which to generate the
+ * message.
+ * @param size The size, in bytes, of space available in buffer.
+ *
+ * @return The number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_ecc_message(const struct mem_ctl_info *mci,
+				 const struct ppc4xx_ecc_status *status,
+				 char *buffer,
+				 size_t size)
+{
+	int n, total = 0;
+
+	n = ppc4xx_edac_generate_bank_message(mci, status, buffer, size);
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+	n = ppc4xx_edac_generate_checkbit_message(mci, status, buffer, size);
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+	n = ppc4xx_edac_generate_lane_message(mci, status, buffer, size);
+
+	if (n < 0 || n >= size)
+		goto fail;
+
+	buffer += n;
+	size -= n;
+	total += n;
+
+ fail:
+	return total;
+}
+
+/**
+ * This routine generates to the provided buffer the portion of the
+ * driver-unique report message associated with the PLB-related BESR
+ * and/or WMIRQ registers of the specified ECC status.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the PLB message being generated.
+ * @param status A pointer to the ECC status structure to generate the
+ * message from.
+ * @param buffer A pointer to the buffer in which to generate the
+ * message.
+ * @param size The size, in bytes, of space available in buffer.
+ *
+ * @return The number of characters generated on success; otherwise, <
+ * 0 on error.
+ */
+static int
+ppc4xx_edac_generate_plb_message(const struct mem_ctl_info *mci,
+				 const struct ppc4xx_ecc_status *status,
+				 char *buffer,
+				 size_t size)
+{
+	unsigned int master;
+	bool read;
+
+	if ((status->besr & SDRAM_BESR_MASK) == 0)
+		return 0;
+
+	if ((status->besr & SDRAM_BESR_M0ET_MASK) == SDRAM_BESR_M0ET_NONE)
+		return 0;
+
+	read = ((status->besr & SDRAM_BESR_M0RW_MASK) == SDRAM_BESR_M0RW_READ);
+
+	master = SDRAM_BESR_M0ID_DECODE(status->besr);
+
+	return snprintf(buffer, size,
+			"%s error w/ PLB master %u \"%s\"; ",
+			(read ? "Read" : "Write"),
+			master,
+			(((master >= SDRAM_PLB_M0ID_FIRST) &&
+			  (master <= SDRAM_PLB_M0ID_LAST)) ?
+			 ppc4xx_plb_masters[master] : "UNKNOWN"));
+}
+
+/**
+ * This routine generates to the provided buffer the driver-unique
+ * EDAC report message from the specified ECC status.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the driver-unique message being generated.
+ * @param status A pointer to the ECC status structure to generate the
+ * message from.
+ * @param buffer A pointer to the buffer in which to generate the
+ * message.
+ * @param size The size, in bytes, of space available in buffer.
+ */
+static void
+ppc4xx_edac_generate_message(const struct mem_ctl_info *mci,
+			     const struct ppc4xx_ecc_status *status,
+			     char *buffer,
+			     size_t size)
+{
+	int n;
+
+	if (buffer == NULL || size == 0)
+		return;
+
+	n = ppc4xx_edac_generate_ecc_message(mci, status, buffer, size);
+
+	if (n < 0 || n >= size)
+		return;
+
+	buffer += n;
+	size -= n;
+
+	ppc4xx_edac_generate_plb_message(mci, status, buffer, size);
+}
+
+#ifdef DEBUG
+/**
+ * This routine dumps to the kernel log buffer the raw and
+ * interpretted specified ECC status.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the status being dumped.
+ * @param status A pointer to the ECC status structure to generate the
+ * dump from.
+ */
+static void
+ppc4xx_ecc_dump_status(const struct mem_ctl_info *mci,
+		       const struct ppc4xx_ecc_status *status)
+{
+	char message[PPC4XX_EDAC_MESSAGE_SIZE];
+
+	ppc4xx_edac_generate_message(mci, status, message, sizeof(message));
+
+	ppc4xx_edac_mc_info(mci,
+			    "\n"
+			    "\tECCES: 0x%08x\n"
+			    "\tWMIRQ: 0x%08x\n"
+			    "\tBESR:  0x%08x\n"
+			    "\tBEAR:  0x%08x%08x\n"
+			    "\t%s\n",
+			    status->ecces,
+			    status->wmirq,
+			    status->besr,
+			    status->bearh,
+			    status->bearl,
+			    message);
+}
+#endif /* DEBUG */
+
+/**
+ * Read and masks, as appropriate, all the relevant status registers
+ * that deal with ibm,sdram-4xx-ddr2 ECC errors. While we read all of
+ * them, for correctable errors, we only expect to deal with
+ * ECCES. For uncorrectable errors, we expect to deal with all of
+ * them.
+ *
+ * @param status A pointer to the ECC status structure to populate the
+ * ECC status with.
+ */
+static void
+ppc4xx_ecc_get_status(struct ppc4xx_ecc_status *status)
+{
+	status->ecces = mfsdram(ECCES) & SDRAM_ECCES_MASK;
+	status->wmirq = mfsdram(WMIRQ) & SDRAM_WMIRQ_MASK;
+	status->besr  = mfsdram(BESR)  & SDRAM_BESR_MASK;
+	status->bearl = mfsdram(BEARL);
+	status->bearh = mfsdram(BEARH);
+}
+
+/**
+ * This routine clears--by writing the masked (as appropriate) status
+ * values back to--the status registers that deal with
+ * ibm,sdram-4xx-ddr2 ECC errors.
+ *
+ * @param status A pointer to the ECC status structure containing the
+ * values to write to clear the ECC status.
+ */
+static void
+ppc4xx_ecc_clear_status(const struct ppc4xx_ecc_status *status)
+{
+	mtsdram(ECCES, status->ecces & SDRAM_ECCES_MASK);
+	mtsdram(WMIRQ, status->wmirq & SDRAM_WMIRQ_MASK);
+	mtsdram(BESR, status->besr & SDRAM_BESR_MASK);
+	mtsdram(BEARL, 0);
+	mtsdram(BEARH, 0);
+}
+
+/**
+ * This routine handles an ibm,sdram-4xx-ddr2 controller ECC
+ * correctable error. Per the aforementioned discussion, there's not
+ * enough status available to use the full EDAC correctable error
+ * interface, so we just pass driver-unique message to the "no info"
+ * interface.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the correctable error being handled and reported.
+ * @param status A pointer to the ECC status structure associated with
+ * the correctable error being handled and reported.
+ */
+static void
+ppc4xx_edac_handle_ce(struct mem_ctl_info *mci,
+		      const struct ppc4xx_ecc_status *status)
+{
+	int row;
+	char message[PPC4XX_EDAC_MESSAGE_SIZE];
+
+	ppc4xx_edac_generate_message(mci, status, message, sizeof(message));
+
+	for (row = 0; row < mci->nr_csrows; row++)
+		if (ppc4xx_edac_check_bank_error(status, row))
+			edac_mc_handle_ce_no_info(mci, message);
+}
+
+/**
+ * This routine handles an ibm,sdram-4xx-ddr2 controller ECC
+ * uncorrectable error.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the uncorrectable error being handled and reported.
+ * @param status A pointer to the ECC status structure associated with
+ * the uncorrectable error being handled and reported.
+ */
+static void
+ppc4xx_edac_handle_ue(struct mem_ctl_info *mci,
+		      const struct ppc4xx_ecc_status *status)
+{
+	const u64 bear = ((u64)status->bearh << 32 | status->bearl);
+	const unsigned long pfn = bear >> PAGE_SHIFT;
+	const unsigned long poff = bear & ~PAGE_MASK;
+	int row;
+	char message[PPC4XX_EDAC_MESSAGE_SIZE];
+
+	ppc4xx_edac_generate_message(mci, status, message, sizeof(message));
+
+	for (row = 0; row < mci->nr_csrows; row++)
+		if (ppc4xx_edac_check_bank_error(status, row))
+			edac_mc_handle_ue(mci, pfn, poff, row, message);
+}
+
+/**
+ * This routine is used to check and post ECC errors and is called by
+ * both the EDAC polling thread and this driver's CE and UE interrupt
+ * handler.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the ibm,sdram-4xx-ddr2 controller being checked.
+ */
+static void
+ppc4xx_edac_check(struct mem_ctl_info *mci)
+{
+#ifdef DEBUG
+	static unsigned int count;
+#endif
+	struct ppc4xx_ecc_status status;
+
+	ppc4xx_ecc_get_status(&status);
+
+#ifdef DEBUG
+	if (count++ % 30 == 0)
+		ppc4xx_ecc_dump_status(mci, &status);
+#endif
+
+	if (status.ecces & SDRAM_ECCES_UE)
+		ppc4xx_edac_handle_ue(mci, &status);
+
+	if (status.ecces & SDRAM_ECCES_CE)
+		ppc4xx_edac_handle_ce(mci, &status);
+
+	ppc4xx_ecc_clear_status(&status);
+}
+
+/**
+ * This routine implements the interrupt handler for both correctable
+ * and uncorrectable ECC errors for the ibm,sdram-4xx-ddr2
+ * controller. It simply calls through to the same routine used during
+ * polling to check, report and clear the ECC status.
+ *
+ * @param irq The virtual interrupt number being serviced
+ * @param dev_id
+ *
+ * @return
+ */
+static irqreturn_t
+ppc4xx_edac_isr(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = (struct mem_ctl_info *)dev_id;
+
+	ppc4xx_edac_check(mci);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * This routine returns the EDAC device type width appropriate for the
+ * current controller configuration.
+ *
+ * TODO: This needs to be conditioned dynamically through feature
+ * flags or some such when other controller variants are supported as
+ * the 405EX[r] is 16-/32-bit and the others are 32-/64-bit with the
+ * 16- and 64-bit field definition/value/enumeration (b1) overloaded
+ * among them.
+ *
+ * @param mcopt1 The 32-bit Memory Controller Option 1 register value
+ * currently set for the controller, from which the width is derived.
+ *
+ * @return A device type width enumeration.
+ */
+static enum dev_type __devinit
+ppc4xx_edac_get_dtype(u32 mcopt1)
+{
+	switch (mcopt1 & SDRAM_MCOPT1_WDTH_MASK) {
+
+	case SDRAM_MCOPT1_WDTH_16:
+		return DEV_X2;
+
+	case SDRAM_MCOPT1_WDTH_32:
+		return DEV_X4;
+
+	default:
+		return DEV_UNKNOWN;
+	}
+}
+
+/**
+ * This routine returns the EDAC memory type appropriate for the
+ * current controller configuration.
+ *
+ * @param The 32-bit Memory Controller Option 1 register value
+ * currently set for the controller, from which the memory type is
+ * derived.
+ *
+ * @return A memory type enumeration.
+ */
+static enum mem_type __devinit
+ppc4xx_edac_get_mtype(u32 mcopt1)
+{
+	bool rden = ((mcopt1 & SDRAM_MCOPT1_RDEN_MASK) == SDRAM_MCOPT1_RDEN);
+
+	switch (mcopt1 & SDRAM_MCOPT1_DDR_TYPE_MASK) {
+
+	case SDRAM_MCOPT1_DDR2_TYPE:
+		return rden ? MEM_RDDR2 : MEM_DDR2;
+
+	case SDRAM_MCOPT1_DDR1_TYPE:
+		return rden ? MEM_RDDR : MEM_DDR;
+
+	default:
+		return MEM_UNKNOWN;
+
+	}
+}
+
+/**
+ * This routine intializes the virtual "chip select rows" associated
+ * with the EDAC memory controller instance. An ibm,sdram-4xx-ddr2
+ * controller bank/rank is mapped to a row.
+ *
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the ibm,sdram-4xx-ddr2 controller for which the
+ * csrows (i.e. banks/ranks) are being initialized.
+ * @param mcopt1 The 32-bit Memory Controller Option 1 register value
+ * currently set for the controller, from which bank width and memory
+ * typ information is derived.
+ *
+ * @return 0 if OK; otherwise, -EINVAL if the memory bank size
+ * configuration cannot be determined.
+ */
+static int __devinit
+ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1)
+{
+	int status = 0;
+	enum mem_type mtype;
+	enum dev_type dtype;
+	enum edac_type edac_mode;
+	int row;
+	u32 mbxcf, size;
+	static u32 ppc4xx_last_page;
+
+	/* Establish the memory type and width */
+
+	mtype = ppc4xx_edac_get_mtype(mcopt1);
+	dtype = ppc4xx_edac_get_dtype(mcopt1);
+
+	/* Establish EDAC mode */
+
+	if (mci->edac_cap & EDAC_FLAG_SECDED)
+		edac_mode = EDAC_SECDED;
+	else if (mci->edac_cap & EDAC_FLAG_EC)
+		edac_mode = EDAC_EC;
+	else
+		edac_mode = EDAC_NONE;
+
+	/*
+	 * Initialize each chip select row structure which correspond
+	 * 1:1 with a controller bank/rank.
+	 */
+
+	for (row = 0; row < mci->nr_csrows; row++) {
+		struct csrow_info *csi = &mci->csrows[row];
+
+		/*
+		 * Get the configuration settings for this
+		 * row/bank/rank and skip disabled banks.
+		 */
+
+		mbxcf = mfsdram(MBXCF(row));
+
+		if ((mbxcf & SDRAM_MBCF_BE_MASK) != SDRAM_MBCF_BE_ENABLE)
+			continue;
+
+		/* Map the bank configuration size setting to pages. */
+
+		size = mbxcf & SDRAM_MBCF_SZ_MASK;
+
+		switch (size) {
+
+		case SDRAM_MBCF_SZ_4MB:
+		case SDRAM_MBCF_SZ_8MB:
+		case SDRAM_MBCF_SZ_16MB:
+		case SDRAM_MBCF_SZ_32MB:
+		case SDRAM_MBCF_SZ_64MB:
+		case SDRAM_MBCF_SZ_128MB:
+		case SDRAM_MBCF_SZ_256MB:
+		case SDRAM_MBCF_SZ_512MB:
+		case SDRAM_MBCF_SZ_1GB:
+		case SDRAM_MBCF_SZ_2GB:
+		case SDRAM_MBCF_SZ_4GB:
+		case SDRAM_MBCF_SZ_8GB:
+			csi->nr_pages = SDRAM_MBCF_SZ_TO_PAGES(size);
+			break;
+
+		default:
+			ppc4xx_edac_mc_err(mci,
+					   "Unrecognized memory bank %d size "
+					   "0x%08x\n",
+					   row, SDRAM_MBCF_SZ_DECODE(size));
+			status = -EINVAL;
+			goto done;
+		}
+
+		csi->first_page = ppc4xx_last_page;
+		csi->last_page	= csi->first_page + csi->nr_pages - 1;
+		csi->page_mask	= 0;
+
+		/*
+		 * It's unclear exactly what grain should be set to
+		 * here. The SDRAM_ECCES register allows resolution of
+		 * an error down to a nibble which would potentially
+		 * argue for a grain of '1' byte, even though we only
+		 * know the associated addres for uncorrectable
+		 * errors. This value is not used at present for
+		 * anything other than error reporting so getting it
+		 * wrong should be of little consequence. Other
+		 * possible values would be the PLB width (16), the
+		 * page size (PAGE_SIZE) or the memory width (2 or 4).
+		 */
+
+		csi->grain	= 1;
+
+		csi->mtype	= mtype;
+		csi->dtype	= dtype;
+
+		csi->edac_mode	= edac_mode;
+
+		ppc4xx_last_page += csi->nr_pages;
+	}
+
+ done:
+	return status;
+}
+
+/**
+ * This routine performs initialization of the EDAC memory controller
+ * instance and related driver-private data associated with the
+ * ibm,sdram-4xx-ddr2 memory controller the instance is bound to.
+ *
+ * @param mci A pointer to the EDAC memory controller instance being
+ * initialized.
+ * @param op A pointer to the OpenFirmware device tree node associated
+ * with the controller this EDAC instance is bound to.
+ * @param match A pointer to the OpenFirmware device tree match
+ * information associated with the controller this EDAC instance is
+ * bound to.
+ * @param mcopt1 The 32-bit Memory Controller Option 1 register value
+ * currently set for the controller, from which ECC capabilities and
+ * scrub mode are derived.
+ *
+ * @return 0 if OK; otherwise, < 0 on error.
+ */
+static int __devinit
+ppc4xx_edac_mc_init(struct mem_ctl_info *mci,
+		    struct of_device *op,
+		    const struct of_device_id *match,
+		    u32 mcopt1)
+{
+	int status = 0;
+	const u32 memcheck = (mcopt1 & SDRAM_MCOPT1_MCHK_MASK);
+	struct ppc4xx_edac_pdata *pdata = NULL;
+	const struct device_node *np = op->node;
+
+	/* Initial private data and driver pointers */
+
+	mci->dev = &op->dev;
+
+	dev_set_drvdata(mci->dev, mci);
+
+	pdata = mci->pvt_info;
+
+	pdata->irqs.sec = NO_IRQ;
+	pdata->irqs.ded = NO_IRQ;
+
+	/* Initialize controller capabilities and configuration */
+
+	mci->mtype_cap		= (MEM_FLAG_DDR | MEM_FLAG_RDDR |
+				   MEM_FLAG_DDR2 | MEM_FLAG_RDDR2);
+
+	mci->edac_ctl_cap	= (EDAC_FLAG_NONE |
+				   EDAC_FLAG_EC |
+				   EDAC_FLAG_SECDED);
+
+	mci->scrub_cap		= SCRUB_NONE;
+	mci->scrub_mode		= SCRUB_NONE;
+
+	/*
+	 * Update the actual capabilites based on the MCOPT1[MCHK]
+	 * settings. Scrubbing is only useful if reporting is enabled.
+	 */
+
+	switch (memcheck) {
+
+	case SDRAM_MCOPT1_MCHK_CHK:
+		mci->edac_cap	= EDAC_FLAG_EC;
+		break;
+
+	case SDRAM_MCOPT1_MCHK_CHK_REP:
+		mci->edac_cap	= (EDAC_FLAG_EC | EDAC_FLAG_SECDED);
+		mci->scrub_mode	= SCRUB_SW_SRC;
+		break;
+
+	default:
+		mci->edac_cap	= EDAC_FLAG_NONE;
+		break;
+
+	}
+
+	/* Initialize strings */
+
+	mci->mod_name		= PPC4XX_EDAC_MODULE_NAME;
+	mci->mod_ver		= PPC4XX_EDAC_MODULE_REVISION;
+	mci->ctl_name		= match->compatible,
+	mci->dev_name		= np->full_name;
+
+	/* Initialize callbacks */
+
+	mci->edac_check		= ppc4xx_edac_check;
+	mci->ctl_page_to_phys	= NULL;
+
+	/* Initialize chip select rows */
+
+	status = ppc4xx_edac_init_csrows(mci, mcopt1);
+
+	if (status)
+		ppc4xx_edac_mc_warning(mci, "Failed to initialize rows!\n");
+
+	return status;
+}
+
+/**
+ * This routine parses the correctable and uncorrectable error
+ * interrupts from the device tree node and maps and assigns them to
+ * the associated EDAC memory controller instance.
+ *
+ * @param op A pointer to the OpenFirmware device tree node associated
+ * with the controller this EDAC instance is bound to.
+ * @param mci A pointer to the EDAC memory controller instance
+ * associated with the ibm,sdram-4xx-ddr2 controller for which
+ * interrupts are being registered.
+ *
+ * @return 0 if OK; otherwise, -ENODEV if the interrupts could not be
+ * mapped and assigned.
+ */
+static int __devinit
+ppc4xx_edac_register_irq(struct of_device *op, struct mem_ctl_info *mci)
+{
+	int status = 0;
+	int ded_irq, sec_irq;
+	struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
+	struct device_node *np = op->node;
+
+	ded_irq = irq_of_parse_and_map(np, INTMAP_ECCDED_INDEX);
+	sec_irq = irq_of_parse_and_map(np, INTMAP_ECCSEC_INDEX);
+
+	if (ded_irq == NO_IRQ || sec_irq == NO_IRQ) {
+		ppc4xx_edac_mc_err(mci, "Unable to map interrupts.\n");
+		status = -ENODEV;
+		goto fail;
+	}
+
+	status = request_irq(ded_irq,
+			     ppc4xx_edac_isr,
+			     IRQF_DISABLED,
+			     "[EDAC] MC ECCDED",
+			     mci);
+
+	if (status < 0) {
+		ppc4xx_edac_mc_err(mci, "Unable to request irq %d for ECC DED",
+				   ded_irq);
+		status = -ENODEV;
+		goto fail1;
+	}
+
+	status = request_irq(sec_irq,
+			     ppc4xx_edac_isr,
+			     IRQF_DISABLED,
+			     "[EDAC] MC ECCSEC",
+			     mci);
+
+	if (status < 0) {
+		ppc4xx_edac_mc_err(mci, "Unable to request irq %d for ECC SEC",
+				   sec_irq);
+		status = -ENODEV;
+		goto fail2;
+	}
+
+	ppc4xx_edac_mc_info(mci, "ECCDED irq is %d\n", ded_irq);
+	ppc4xx_edac_mc_info(mci, "ECCSEC irq is %d\n", sec_irq);
+
+	pdata->irqs.ded = ded_irq;
+	pdata->irqs.sec = sec_irq;
+
+	return 0;
+
+ fail2:
+	free_irq(sec_irq, mci);
+
+ fail1:
+	free_irq(ded_irq, mci);
+
+ fail:
+	return status;
+}
+
+/**
+ * This routine probes a specific ibm,sdram-4xx-ddr2 controller
+ * instance for binding with the driver.
+ *
+ * @param op A pointer to the OpenFirmware device tree node associated
+ * with the controller being probed for driver binding.
+ * @param match A pointer to the OpenFirmware device tree match
+ * information associated with the controller being probed for driver
+ * binding.
+ *
+ * @return 0 if the controller instance was successfully bound to the
+ * driver; otherwise, < 0 on error.
+ */
+static int __devinit
+ppc4xx_edac_probe(struct of_device *op, const struct of_device_id *match)
+{
+	int status = 0;
+	u32 mcopt1, memcheck;
+	const struct device_node *np = op->node;
+	struct mem_ctl_info *mci = NULL;
+	static int ppc4xx_edac_index;
+
+	/*
+	 * At this point, we only support the controller realized on
+	 * the AMCC PPC 405EX[r]. Reject anything else.
+	 */
+
+	if (!of_device_is_compatible(np, "ibm,sdram-405ex") &&
+	    !of_device_is_compatible(np, "ibm,sdram-405exr")) {
+		ppc4xx_edac_notice("Only the PPC405EX[r] is supported.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * First determine whether ECC is enabled at all. If not,
+	 * there is no useful checking or monitoring that can be done
+	 * for this controller.
+	 */
+
+	mcopt1 = mfsdram(MCOPT1);
+	memcheck = (mcopt1 & SDRAM_MCOPT1_MCHK_MASK);
+
+	if (memcheck == SDRAM_MCOPT1_MCHK_NON) {
+		ppc4xx_edac_info("%s: No ECC memory detected or "
+				 "ECC is disabled.\n", np->full_name);
+		status = -ENODEV;
+		goto done;
+	}
+
+	/*
+	 * At this point, we know ECC is enabled, allocate an EDAC
+	 * controller instance and perform the appropriate
+	 * initialization.
+	 */
+
+	mci = edac_mc_alloc(sizeof(struct ppc4xx_edac_pdata),
+			    ppc4xx_edac_nr_csrows,
+			    ppc4xx_edac_nr_chans,
+			    ppc4xx_edac_index);
+
+	if (mci == NULL) {
+		ppc4xx_edac_warning("%s: "
+				    "failed to allocate EDAC MC instance!\n",
+				    np->full_name);
+		status = -ENOMEM;
+		goto done;
+	}
+
+	status = ppc4xx_edac_mc_init(mci, op, match, mcopt1);
+
+	if (status) {
+		ppc4xx_edac_mc_warning(mci,
+				       "Failed to initialize instance!\n");
+		goto fail;
+	}
+
+	/*
+	 * We have a valid, initialized EDAC instance bound to the
+	 * controller. Attempt to register it with the EDAC subsystem
+	 * and, if necessary, register interrupts.
+	 */
+
+	if (edac_mc_add_mc(mci)) {
+		ppc4xx_edac_mc_warning(mci, "Failed to add instance!\n");
+		status = -ENODEV;
+		goto fail;
+	}
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		status = ppc4xx_edac_register_irq(op, mci);
+
+		if (status)
+			goto fail1;
+	}
+
+	ppc4xx_edac_index++;
+
+	return 0;
+
+ fail1:
+	edac_mc_del_mc(mci->dev);
+
+ fail:
+	edac_mc_free(mci);
+
+ done:
+	return status;
+}
+
+/**
+ * This routine unbinds the EDAC memory controller instance associated
+ * with the specified ibm,sdram-4xx-ddr2 controller described by the
+ * OpenFirmware device tree node passed as a parameter.
+ *
+ * @param op A pointer to the OpenFirmware device tree node associated
+ * with the controller this EDAC instance is to be unbound/removed from.
+ *
+ * @return Unconditionally 0.
+ */
+static int
+ppc4xx_edac_remove(struct of_device *op)
+{
+	struct mem_ctl_info *mci = dev_get_drvdata(&op->dev);
+	struct ppc4xx_edac_pdata *pdata = mci->pvt_info;
+
+	if (edac_op_state == EDAC_OPSTATE_INT) {
+		free_irq(pdata->irqs.sec, mci);
+		free_irq(pdata->irqs.ded, mci);
+	}
+
+	edac_mc_del_mc(mci->dev);
+	edac_mc_free(mci);
+
+	return 0;
+}
+
+/**
+ * This routine ensures that the EDAC memory controller reporting
+ * method is mapped to a sane value as the EDAC core defines the value
+ * to EDAC_OPSTATE_INVAL by default. We don't call the global
+ * opstate_init as that defaults to polling and we want interrupt as
+ * the default.
+ */
+static void inline __init
+ppc4xx_edac_opstate_init(void)
+{
+	switch (edac_op_state) {
+
+	case EDAC_OPSTATE_POLL:
+	case EDAC_OPSTATE_INT:
+		break;
+
+	default:
+		edac_op_state = EDAC_OPSTATE_INT;
+		break;
+	}
+
+	ppc4xx_edac_info("Reporting type: %s\n",
+			 ((edac_op_state == EDAC_OPSTATE_POLL) ?
+			  EDAC_OPSTATE_POLL_STR :
+			  ((edac_op_state == EDAC_OPSTATE_INT) ?
+			   EDAC_OPSTATE_INT_STR :
+			   EDAC_OPSTATE_UNKNOWN_STR)));
+}
+
+/**
+ * This routine is the driver/module insertion entry point. It
+ * initializes the EDAC memory controller reporting state and
+ * registers the driver as an OpenFirmware device tree platform
+ * driver.
+ */
+static int __init
+ppc4xx_edac_init(void)
+{
+	ppc4xx_edac_opstate_init();
+
+	return of_register_platform_driver(&ppc4xx_edac_driver);
+}
+
+/**
+ * This routine is the driver/module removal entry point. It
+ * unregisters the driver as an OpenFirmware device tree platform
+ * driver.
+ */
+static void __exit
+ppc4xx_edac_exit(void)
+{
+	of_unregister_platform_driver(&ppc4xx_edac_driver);
+}
+
+module_init(ppc4xx_edac_init);
+module_exit(ppc4xx_edac_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Grant Erickson <gerickson@nuovations.com>");
+MODULE_DESCRIPTION("EDAC Driver for the PPC4xx IBM DDR2 Memory Controller");
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting State: "
+		 "0=" EDAC_OPSTATE_POLL_STR ", 2=" EDAC_OPSTATE_INT_STR);
diff --git a/drivers/edac/ppc4xx_edac.h b/drivers/edac/ppc4xx_edac.h
new file mode 100644
index 0000000..639449e
--- /dev/null
+++ b/drivers/edac/ppc4xx_edac.h
@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 2008 Nuovation System Designs, LLC
+ *   Grant Erickson <gerickson@nuovations.com>
+ *
+ * This file defines processor mnemonics for accessing and managing
+ * the IBM DDR1/DDR2 ECC controller found in the 405EX[r], 440SP,
+ * 440SPe, 460EX, 460GT and 460SX.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+
+#ifndef __PPC4XX_EDAC_H
+#define __PPC4XX_EDAC_H
+
+#include <linux/types.h>
+
+/*
+ * Macro for generating register field mnemonics
+ */
+#define PPC_REG_BITS			32
+#define PPC_REG_VAL(bit, val)		((val) << ((PPC_REG_BITS - 1) - (bit)))
+#define PPC_REG_DECODE(bit, val)	((val) >> ((PPC_REG_BITS - 1) - (bit)))
+
+/*
+ * IBM 4xx DDR1/DDR2 SDRAM indirect Device Control Registers (DCRs)
+ */
+#define	DCRN_SDRAM0_BASE		0x010
+#define DCRN_SDRAM0_CONFIG_ADDR		(DCRN_SDRAM0_BASE+0x0)
+#define DCRN_SDRAM0_CONFIG_DATA		(DCRN_SDRAM0_BASE+0x1)
+
+/*
+ * IBM 4xx DDR1/DDR2 SDRAM memory controller registers (at least those
+ * relevant to ECC)
+ */
+#define SDRAM_BESR			0x00	/* Error status (read/clear) */
+#define SDRAM_BESRT			0x01	/* Error statuss (test/set)  */
+#define SDRAM_BEARL			0x02	/* Error address low	     */
+#define SDRAM_BEARH			0x03	/* Error address high	     */
+#define SDRAM_WMIRQ			0x06	/* Write master (read/clear) */
+#define SDRAM_WMIRQT			0x07	/* Write master (test/set)   */
+#define SDRAM_MCOPT1			0x20	/* Controller options 1	     */
+#define SDRAM_MBXCF_BASE		0x40	/* Bank n configuration base */
+#define	SDRAM_MBXCF(n)			(SDRAM_MBXCF_BASE + (4 * (n)))
+#define SDRAM_MB0CF			SDRAM_MBXCF(0)
+#define SDRAM_MB1CF			SDRAM_MBXCF(1)
+#define SDRAM_MB2CF			SDRAM_MBXCF(2)
+#define SDRAM_MB3CF			SDRAM_MBXCF(3)
+#define SDRAM_ECCCR			0x98	/* ECC error status	     */
+#define SDRAM_ECCES			SDRAM_ECCCR
+
+/*
+ * PLB Master IDs
+ */
+#define	SDRAM_PLB_M0ID_FIRST		0
+#define	SDRAM_PLB_M0ID_ICU		SDRAM_PLB_M0ID_FIRST
+#define	SDRAM_PLB_M0ID_PCIE0		1
+#define	SDRAM_PLB_M0ID_PCIE1		2
+#define	SDRAM_PLB_M0ID_DMA		3
+#define	SDRAM_PLB_M0ID_DCU		4
+#define	SDRAM_PLB_M0ID_OPB		5
+#define	SDRAM_PLB_M0ID_MAL		6
+#define	SDRAM_PLB_M0ID_SEC		7
+#define	SDRAM_PLB_M0ID_AHB		8
+#define SDRAM_PLB_M0ID_LAST		SDRAM_PLB_M0ID_AHB
+#define SDRAM_PLB_M0ID_COUNT		(SDRAM_PLB_M0ID_LAST - \
+					 SDRAM_PLB_M0ID_FIRST + 1)
+
+/*
+ * Memory Controller Bus Error Status Register
+ */
+#define SDRAM_BESR_MASK			PPC_REG_VAL(7, 0xFF)
+#define SDRAM_BESR_M0ID_MASK		PPC_REG_VAL(3, 0xF)
+#define	SDRAM_BESR_M0ID_DECODE(n)	PPC_REG_DECODE(3, n)
+#define SDRAM_BESR_M0ID_ICU		PPC_REG_VAL(3, SDRAM_PLB_M0ID_ICU)
+#define SDRAM_BESR_M0ID_PCIE0		PPC_REG_VAL(3, SDRAM_PLB_M0ID_PCIE0)
+#define SDRAM_BESR_M0ID_PCIE1		PPC_REG_VAL(3, SDRAM_PLB_M0ID_PCIE1)
+#define SDRAM_BESR_M0ID_DMA		PPC_REG_VAL(3, SDRAM_PLB_M0ID_DMA)
+#define SDRAM_BESR_M0ID_DCU		PPC_REG_VAL(3, SDRAM_PLB_M0ID_DCU)
+#define SDRAM_BESR_M0ID_OPB		PPC_REG_VAL(3, SDRAM_PLB_M0ID_OPB)
+#define SDRAM_BESR_M0ID_MAL		PPC_REG_VAL(3, SDRAM_PLB_M0ID_MAL)
+#define SDRAM_BESR_M0ID_SEC		PPC_REG_VAL(3, SDRAM_PLB_M0ID_SEC)
+#define SDRAM_BESR_M0ID_AHB		PPC_REG_VAL(3, SDRAM_PLB_M0ID_AHB)
+#define SDRAM_BESR_M0ET_MASK		PPC_REG_VAL(6, 0x7)
+#define SDRAM_BESR_M0ET_NONE		PPC_REG_VAL(6, 0)
+#define SDRAM_BESR_M0ET_ECC		PPC_REG_VAL(6, 1)
+#define SDRAM_BESR_M0RW_MASK		PPC_REG_VAL(7, 1)
+#define SDRAM_BESR_M0RW_WRITE		PPC_REG_VAL(7, 0)
+#define SDRAM_BESR_M0RW_READ		PPC_REG_VAL(7, 1)
+
+/*
+ * Memory Controller PLB Write Master Interrupt Register
+ */
+#define SDRAM_WMIRQ_MASK		PPC_REG_VAL(8, 0x1FF)
+#define	SDRAM_WMIRQ_ENCODE(id)		PPC_REG_VAL((id % \
+						     SDRAM_PLB_M0ID_COUNT), 1)
+#define SDRAM_WMIRQ_ICU			PPC_REG_VAL(SDRAM_PLB_M0ID_ICU, 1)
+#define SDRAM_WMIRQ_PCIE0		PPC_REG_VAL(SDRAM_PLB_M0ID_PCIE0, 1)
+#define SDRAM_WMIRQ_PCIE1		PPC_REG_VAL(SDRAM_PLB_M0ID_PCIE1, 1)
+#define SDRAM_WMIRQ_DMA			PPC_REG_VAL(SDRAM_PLB_M0ID_DMA, 1)
+#define SDRAM_WMIRQ_DCU			PPC_REG_VAL(SDRAM_PLB_M0ID_DCU, 1)
+#define SDRAM_WMIRQ_OPB			PPC_REG_VAL(SDRAM_PLB_M0ID_OPB, 1)
+#define SDRAM_WMIRQ_MAL			PPC_REG_VAL(SDRAM_PLB_M0ID_MAL, 1)
+#define SDRAM_WMIRQ_SEC			PPC_REG_VAL(SDRAM_PLB_M0ID_SEC, 1)
+#define SDRAM_WMIRQ_AHB			PPC_REG_VAL(SDRAM_PLB_M0ID_AHB, 1)
+
+/*
+ * Memory Controller Options 1 Register
+ */
+#define SDRAM_MCOPT1_MCHK_MASK	    PPC_REG_VAL(3, 0x3)	 /* ECC mask	     */
+#define SDRAM_MCOPT1_MCHK_NON	    PPC_REG_VAL(3, 0x0)	 /* No ECC gen	     */
+#define SDRAM_MCOPT1_MCHK_GEN	    PPC_REG_VAL(3, 0x2)	 /* ECC gen	     */
+#define SDRAM_MCOPT1_MCHK_CHK	    PPC_REG_VAL(3, 0x1)	 /* ECC gen and chk  */
+#define SDRAM_MCOPT1_MCHK_CHK_REP   PPC_REG_VAL(3, 0x3)	 /* ECC gen/chk/rpt  */
+#define SDRAM_MCOPT1_MCHK_DECODE(n) ((((u32)(n)) >> 28) & 0x3)
+#define SDRAM_MCOPT1_RDEN_MASK	    PPC_REG_VAL(4, 0x1)	 /* Rgstrd DIMM mask */
+#define SDRAM_MCOPT1_RDEN	    PPC_REG_VAL(4, 0x1)	 /* Rgstrd DIMM enbl */
+#define SDRAM_MCOPT1_WDTH_MASK	    PPC_REG_VAL(7, 0x1)	 /* Width mask	     */
+#define SDRAM_MCOPT1_WDTH_32	    PPC_REG_VAL(7, 0x0)	 /* 32 bits	     */
+#define SDRAM_MCOPT1_WDTH_16	    PPC_REG_VAL(7, 0x1)	 /* 16 bits	     */
+#define SDRAM_MCOPT1_DDR_TYPE_MASK  PPC_REG_VAL(11, 0x1) /* DDR type mask    */
+#define SDRAM_MCOPT1_DDR1_TYPE	    PPC_REG_VAL(11, 0x0) /* DDR1 type	     */
+#define SDRAM_MCOPT1_DDR2_TYPE	    PPC_REG_VAL(11, 0x1) /* DDR2 type	     */
+
+/*
+ * Memory Bank 0 - n Configuration Register
+ */
+#define SDRAM_MBCF_BA_MASK		PPC_REG_VAL(12, 0x1FFF)
+#define SDRAM_MBCF_SZ_MASK		PPC_REG_VAL(19, 0xF)
+#define SDRAM_MBCF_SZ_DECODE(mbxcf)	PPC_REG_DECODE(19, mbxcf)
+#define SDRAM_MBCF_SZ_4MB		PPC_REG_VAL(19, 0x0)
+#define SDRAM_MBCF_SZ_8MB		PPC_REG_VAL(19, 0x1)
+#define SDRAM_MBCF_SZ_16MB		PPC_REG_VAL(19, 0x2)
+#define SDRAM_MBCF_SZ_32MB		PPC_REG_VAL(19, 0x3)
+#define SDRAM_MBCF_SZ_64MB		PPC_REG_VAL(19, 0x4)
+#define SDRAM_MBCF_SZ_128MB		PPC_REG_VAL(19, 0x5)
+#define SDRAM_MBCF_SZ_256MB		PPC_REG_VAL(19, 0x6)
+#define SDRAM_MBCF_SZ_512MB		PPC_REG_VAL(19, 0x7)
+#define SDRAM_MBCF_SZ_1GB		PPC_REG_VAL(19, 0x8)
+#define SDRAM_MBCF_SZ_2GB		PPC_REG_VAL(19, 0x9)
+#define SDRAM_MBCF_SZ_4GB		PPC_REG_VAL(19, 0xA)
+#define SDRAM_MBCF_SZ_8GB		PPC_REG_VAL(19, 0xB)
+#define SDRAM_MBCF_AM_MASK		PPC_REG_VAL(23, 0xF)
+#define SDRAM_MBCF_AM_MODE0		PPC_REG_VAL(23, 0x0)
+#define SDRAM_MBCF_AM_MODE1		PPC_REG_VAL(23, 0x1)
+#define SDRAM_MBCF_AM_MODE2		PPC_REG_VAL(23, 0x2)
+#define SDRAM_MBCF_AM_MODE3		PPC_REG_VAL(23, 0x3)
+#define SDRAM_MBCF_AM_MODE4		PPC_REG_VAL(23, 0x4)
+#define SDRAM_MBCF_AM_MODE5		PPC_REG_VAL(23, 0x5)
+#define SDRAM_MBCF_AM_MODE6		PPC_REG_VAL(23, 0x6)
+#define SDRAM_MBCF_AM_MODE7		PPC_REG_VAL(23, 0x7)
+#define SDRAM_MBCF_AM_MODE8		PPC_REG_VAL(23, 0x8)
+#define SDRAM_MBCF_AM_MODE9		PPC_REG_VAL(23, 0x9)
+#define SDRAM_MBCF_BE_MASK		PPC_REG_VAL(31, 0x1)
+#define SDRAM_MBCF_BE_DISABLE		PPC_REG_VAL(31, 0x0)
+#define SDRAM_MBCF_BE_ENABLE		PPC_REG_VAL(31, 0x1)
+
+/*
+ * ECC Error Status
+ */
+#define SDRAM_ECCES_MASK		PPC_REG_VAL(21, 0x3FFFFF)
+#define SDRAM_ECCES_BNCE_MASK		PPC_REG_VAL(15, 0xFFFF)
+#define SDRAM_ECCES_BNCE_ENCODE(lane)	PPC_REG_VAL(((lane) & 0xF), 1)
+#define SDRAM_ECCES_CKBER_MASK		PPC_REG_VAL(17, 0x3)
+#define SDRAM_ECCES_CKBER_NONE		PPC_REG_VAL(17, 0)
+#define SDRAM_ECCES_CKBER_16_ECC_0_3	PPC_REG_VAL(17, 2)
+#define SDRAM_ECCES_CKBER_32_ECC_0_3	PPC_REG_VAL(17, 1)
+#define SDRAM_ECCES_CKBER_32_ECC_4_8	PPC_REG_VAL(17, 2)
+#define SDRAM_ECCES_CKBER_32_ECC_0_8	PPC_REG_VAL(17, 3)
+#define SDRAM_ECCES_CE			PPC_REG_VAL(18, 1)
+#define SDRAM_ECCES_UE			PPC_REG_VAL(19, 1)
+#define SDRAM_ECCES_BKNER_MASK		PPC_REG_VAL(21, 0x3)
+#define SDRAM_ECCES_BK0ER		PPC_REG_VAL(20, 1)
+#define SDRAM_ECCES_BK1ER		PPC_REG_VAL(21, 1)
+
+#endif /* __PPC4XX_EDAC_H */
