mbox series

[devicetree,0/4] Add Seville Ethernet switch to T1040RDB

Message ID 20200722172422.2590489-1-olteanv@gmail.com (mailing list archive)
Headers show
Series Add Seville Ethernet switch to T1040RDB | expand

Message

Vladimir Oltean July 22, 2020, 5:24 p.m. UTC
Seville is a DSA switch that is embedded inside the T1040 SoC, and
supported by the mscc_seville DSA driver. The driver has been accepted
this release cycle and is currently available in net-next (and
therefore, in linux-next).

This series adds this switch to the SoC's dtsi files and to the T1040RDB
board file.

Vladimir Oltean (4):
  powerpc: dts: t1040: add bindings for Seville Ethernet switch
  powerpc: dts: t1040: label the 2 MDIO controllers
  powerpc: dts: t1040rdb: put SGMII PHY under &mdio0 label
  powerpc: dts: t1040rdb: add ports for Seville Ethernet switch

 arch/powerpc/boot/dts/fsl/t1040rdb.dts      | 123 +++++++++++++++++++-
 arch/powerpc/boot/dts/fsl/t1040si-post.dtsi |  79 ++++++++++++-
 2 files changed, 194 insertions(+), 8 deletions(-)