@@ -17,7 +17,6 @@
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/notifier.h>
-#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/property.h>
@@ -449,12 +448,7 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
if (np) {
unsigned int quirks = data->pdata->quirks;
- int id;
- /* get index of serial line, if found in DT aliases */
- id = of_alias_get_id(np, "serial");
- if (id >= 0)
- p->line = id;
#ifdef CONFIG_64BIT
if (quirks & DW_UART_QUIRK_OCTEON) {
p->serial_in = dw8250_serial_inq;
@@ -465,12 +459,6 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
}
#endif
- if (of_device_is_big_endian(np)) {
- p->iotype = UPIO_MEM32BE;
- p->serial_in = dw8250_serial_in32be;
- p->serial_out = dw8250_serial_out32be;
- }
-
if (quirks & DW_UART_QUIRK_ARMADA_38X)
p->serial_out = dw8250_serial_out38x;
if (quirks & DW_UART_QUIRK_SKIP_SET_RATE)
@@ -510,39 +498,21 @@ static int dw8250_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct dw8250_data *data;
struct resource *regs;
- int irq;
int err;
- u32 val;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs)
return dev_err_probe(dev, -EINVAL, "no registers defined\n");
- irq = platform_get_irq_optional(pdev, 0);
- /* no interrupt -> fall back to polling */
- if (irq == -ENXIO)
- irq = 0;
- if (irq < 0)
- return irq;
-
spin_lock_init(&p->lock);
- p->mapbase = regs->start;
- p->irq = irq;
p->handle_irq = dw8250_handle_irq;
p->pm = dw8250_do_pm;
p->type = PORT_8250;
- p->flags = UPF_SHARE_IRQ | UPF_FIXED_PORT;
+ p->flags = UPF_FIXED_PORT;
p->dev = dev;
- p->iotype = UPIO_MEM;
- p->serial_in = dw8250_serial_in;
- p->serial_out = dw8250_serial_out;
p->set_ldisc = dw8250_set_ldisc;
p->set_termios = dw8250_set_termios;
- p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
- if (!p->membase)
- return -ENOMEM;
-
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
@@ -554,15 +524,35 @@ static int dw8250_probe(struct platform_device *pdev)
data->uart_16550_compatible = device_property_read_bool(dev,
"snps,uart-16550-compatible");
- err = device_property_read_u32(dev, "reg-shift", &val);
- if (!err)
- p->regshift = val;
+ p->mapbase = regs->start;
+ p->mapsize = resource_size(regs);
- err = device_property_read_u32(dev, "reg-io-width", &val);
- if (!err && val == 4) {
- p->iotype = UPIO_MEM32;
+ p->membase = devm_ioremap(dev, p->mapbase, p->mapsize);
+ if (!p->membase)
+ return -ENOMEM;
+
+ err = uart_read_port_properties(p, true);
+ /* no interrupt -> fall back to polling */
+ if (err == -ENXIO)
+ err = 0;
+ if (err)
+ return err;
+
+ switch (p->iotype) {
+ case UPIO_MEM:
+ p->serial_in = dw8250_serial_in;
+ p->serial_out = dw8250_serial_out;
+ break;
+ case UPIO_MEM32:
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
+ break;
+ case UPIO_MEM32BE:
+ p->serial_in = dw8250_serial_in32be;
+ p->serial_out = dw8250_serial_out32be;
+ break;
+ default:
+ return -ENODEV;
}
if (device_property_read_bool(dev, "dcd-override")) {
@@ -589,9 +579,6 @@ static int dw8250_probe(struct platform_device *pdev)
data->msr_mask_off |= UART_MSR_TERI;
}
- /* Always ask for fixed clock rate from a property. */
- device_property_read_u32(dev, "clock-frequency", &p->uartclk);
-
/* If there is separate baudclk, get the rate from it. */
data->clk = devm_clk_get_optional_enabled(dev, "baudclk");
if (data->clk == NULL)