| Message ID | 20230815092058.4083-1-al.b.danilenko@gmail.com |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | spi: tegra114: Remove unnecessary NULL-pointer checks | expand |
On Tue, 15 Aug 2023 12:20:58 +0300, Alexander Danilenko wrote: > cs_setup, cs_hold and cs_inactive points to fields of spi_device struct, > so there is no sense in checking them for NULL. > > Found by Linux Verification Center (linuxtesting.org) with SVACE. > > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/1] spi: tegra114: Remove unnecessary NULL-pointer checks commit: 373c36bf7914e3198ac2654dede499f340c52950 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 488df681eaef..2226d77a5d20 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -723,27 +723,23 @@ static int tegra_spi_set_hw_cs_timing(struct spi_device *spi) struct spi_delay *setup = &spi->cs_setup; struct spi_delay *hold = &spi->cs_hold; struct spi_delay *inactive = &spi->cs_inactive; - u8 setup_dly, hold_dly, inactive_dly; + u8 setup_dly, hold_dly; u32 setup_hold; u32 spi_cs_timing; u32 inactive_cycles; u8 cs_state; - if ((setup && setup->unit != SPI_DELAY_UNIT_SCK) || - (hold && hold->unit != SPI_DELAY_UNIT_SCK) || - (inactive && inactive->unit != SPI_DELAY_UNIT_SCK)) { + if (setup->unit != SPI_DELAY_UNIT_SCK || + hold->unit != SPI_DELAY_UNIT_SCK || + inactive->unit != SPI_DELAY_UNIT_SCK) { dev_err(&spi->dev, "Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n", SPI_DELAY_UNIT_SCK); return -EINVAL; } - setup_dly = setup ? setup->value : 0; - hold_dly = hold ? hold->value : 0; - inactive_dly = inactive ? inactive->value : 0; - - setup_dly = min_t(u8, setup_dly, MAX_SETUP_HOLD_CYCLES); - hold_dly = min_t(u8, hold_dly, MAX_SETUP_HOLD_CYCLES); + setup_dly = min_t(u8, setup->value, MAX_SETUP_HOLD_CYCLES); + hold_dly = min_t(u8, hold->value, MAX_SETUP_HOLD_CYCLES); if (setup_dly && hold_dly) { setup_hold = SPI_SETUP_HOLD(setup_dly - 1, hold_dly - 1); spi_cs_timing = SPI_CS_SETUP_HOLD(tspi->spi_cs_timing1, @@ -755,7 +751,7 @@ static int tegra_spi_set_hw_cs_timing(struct spi_device *spi) } } - inactive_cycles = min_t(u8, inactive_dly, MAX_INACTIVE_CYCLES); + inactive_cycles = min_t(u8, inactive->value, MAX_INACTIVE_CYCLES); if (inactive_cycles) inactive_cycles--; cs_state = inactive_cycles ? 0 : 1;
cs_setup, cs_hold and cs_inactive points to fields of spi_device struct, so there is no sense in checking them for NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 04e6bb0d6bb1 ("spi: modify set_cs_timing parameter") Signed-off-by: Alexander Danilenko <al.b.danilenko@gmail.com> --- drivers/spi/spi-tegra114.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)