diff mbox series

[v3,5/5] arm64: dts: smaug: Add display panel node

Message ID 20230807133307.27456-6-diogo.ivo@tecnico.ulisboa.pt
State Accepted
Headers show
Series Add JDI LPM102A188A display panel support | expand

Commit Message

Diogo Ivo Aug. 7, 2023, 1:33 p.m. UTC 
The Google Pixel C has a JDI LPM102A188A display panel, so add a
DT node for it.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
---
 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 84ccb1495f21..8c68106eaa98 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -31,6 +31,33 @@  memory {
 	};
 
 	host1x@50000000 {
+		dsia: dsi@54300000 {
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+			status = "okay";
+
+			link2: panel@0 {
+				compatible = "jdi,lpm102a188a";
+				reg = <0>;
+			};
+		};
+
+		dsib: dsi@54400000 {
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+			nvidia,ganged-mode = <&dsia>;
+			status = "okay";
+
+			link1: panel@0 {
+				compatible = "jdi,lpm102a188a";
+				reg = <0>;
+				power-supply = <&pplcd_vdd>;
+				ddi-supply = <&pp1800_lcdio>;
+				enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+				link2 = <&link2>;
+				backlight = <&backlight>;
+			};
+		};
+
 		dpaux: dpaux@545c0000 {
 			status = "okay";
 		};