| Message ID | 20230705064903.12690-2-krzysztof.kozlowski@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | [RFT,1/2] arm64: tegra: correct audio-codec interrupt flag in P2972-0000 | expand |
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts index cd13cf2381dd..ad5d7b9028cd 100644 --- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts @@ -2025,7 +2025,7 @@ audio-codec@1c { compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; - interrupts = <TEGRA234_MAIN_GPIO(AC, 5) GPIO_ACTIVE_HIGH>; + interrupts = <TEGRA234_MAIN_GPIO(AC, 5) IRQ_TYPE_EDGE_FALLING>; clocks = <&bpmp TEGRA234_CLK_AUD_MCLK>; clock-names = "mclk"; realtek,dmic1-data-pin = <RT5640_DMIC1_DATA_PIN_NONE>;
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE. Correct the interrupt flags to a value used also in Tegra30 Beaver board with this device. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)