diff mbox series

[1/3] dt-bindings: PHY: P2U: Add PCIe lane margining support

Message ID 20221124083510.3008139-2-mmaddireddy@nvidia.com
State Changes Requested
Headers show
Series Add support for Lane Margining at Receiver | expand

Commit Message

Manikanta Maddireddy Nov. 24, 2022, 8:35 a.m. UTC
Tegra234 supports PCIe lane margining. P2U HW acts as a relay to exchange
margin control data and margin status between PCIe controller and UPHY.

Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
---
 .../bindings/phy/phy-tegra194-p2u.yaml        | 50 +++++++++++++++++++
 1 file changed, 50 insertions(+)

Comments

Krzysztof Kozlowski Nov. 24, 2022, 8:45 a.m. UTC | #1
On 24/11/2022 09:35, Manikanta Maddireddy wrote:
> Tegra234 supports PCIe lane margining. P2U HW acts as a relay to exchange

typo: merging?

> margin control data and margin status between PCIe controller and UPHY.

Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC.  It might happen, that command when run on an older
kernel, gives you outdated entries.  Therefore please be sure you base
your patches on recent Linux kernel.


> 
> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
> ---
>  .../bindings/phy/phy-tegra194-p2u.yaml        | 50 +++++++++++++++++++
>  1 file changed, 50 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
> index 4dc5205d893b..0ba3f6a0b474 100644
> --- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
> +++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
> @@ -40,6 +40,51 @@ properties:
>    '#phy-cells':
>      const: 0
>  
> +  interrupts:
> +    items:
> +      description: P2U interrupt for Gen4 lane margining functionality.

typo: merging?

> +
> +  interrupt-names:
> +    items:
> +      - const: intr

Drop entire property, not really useful.

> +
> +  nvidia,bpmp:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description: Must contain a pair of phandles to BPMP controller node followed by P2U ID.
> +    items:
> +      - items:
> +          - description: phandle to BPMP controller node
> +          - description: P2U instance ID
> +            maximum: 24
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - nvidia,tegra194-p2u
> +    then:
> +      required:
> +        - reg
> +        - reg-names
> +        - '#phy-cells'

That's not how it should be done. You have only two variants here, so
add a "required:" block with above and only one if:then: clause for
interrupts and nvidia,bpmp.

Requiring reg/reg-names/phy-cells should be in separate patch with its
own reasoning.


Best regards,
Krzysztof
Manikanta Maddireddy Nov. 30, 2022, 3:11 p.m. UTC | #2
Thank you for quick review. I will wait for other reviewers to review 
patch 2 & 3.
I will address all review comments and sendnew revision.

On 11/24/2022 2:15 PM, Krzysztof Kozlowski wrote:
> External email: Use caution opening links or attachments
>
>
> On 24/11/2022 09:35, Manikanta Maddireddy wrote:
>> Tegra234 supports PCIe lane margining. P2U HW acts as a relay to exchange
> typo: merging?
It is not typo, it is PCIe feature lane margining.
https://pcisig.com/pushing-limits-understanding-lane-margining-pcie%C2%AE
>
>> margin control data and margin status between PCIe controller and UPHY.
> Please use scripts/get_maintainers.pl to get a list of necessary people
> and lists to CC.  It might happen, that command when run on an older
> kernel, gives you outdated entries.  Therefore please be sure you base
> your patches on recent Linux kernel.
I verified these patches on 6.0.0-rc6 kernel and executed get_maintainers.pl
script on it. Did I miss anyone here?
>
>
>> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
>> ---
>>   .../bindings/phy/phy-tegra194-p2u.yaml        | 50 +++++++++++++++++++
>>   1 file changed, 50 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>> index 4dc5205d893b..0ba3f6a0b474 100644
>> --- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>> +++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>> @@ -40,6 +40,51 @@ properties:
>>     '#phy-cells':
>>       const: 0
>>
>> +  interrupts:
>> +    items:
>> +      description: P2U interrupt for Gen4 lane margining functionality.
> typo: merging?
It is not typo, it is PCIe feature lane margining.
https://pcisig.com/pushing-limits-understanding-lane-margining-pcie%C2%AE
>
>> +
>> +  interrupt-names:
>> +    items:
>> +      - const: intr
> Drop entire property, not really useful.
In driver, I am using platform_get_irq_byname(), I will change it to 
platform_get_irq()
and drop this property.
>
>> +
>> +  nvidia,bpmp:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>> +    description: Must contain a pair of phandles to BPMP controller node followed by P2U ID.
>> +    items:
>> +      - items:
>> +          - description: phandle to BPMP controller node
>> +          - description: P2U instance ID
>> +            maximum: 24
>> +
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - nvidia,tegra194-p2u
>> +    then:
>> +      required:
>> +        - reg
>> +        - reg-names
>> +        - '#phy-cells'
> That's not how it should be done. You have only two variants here, so
> add a "required:" block with above and only one if:then: clause for
> interrupts and nvidia,bpmp.
>
> Requiring reg/reg-names/phy-cells should be in separate patch with its
> own reasoning.
Ok, I will create two separate patches and add if:then clause only for 
tegra234.
As per understanding final change will look like below, right?


required:
   - reg
   - reg-names
   - '#phy-cells'

allOf:
   - if:
       properties:
         compatible:
           contains:
             enum:
               - nvidia,tegra234-p2u
     then:
       required:
         - interrupts
         - nvidia,bpmp

>
>
> Best regards,
> Krzysztof
>
Krzysztof Kozlowski Nov. 30, 2022, 3:15 p.m. UTC | #3
On 30/11/2022 16:11, Manikanta Maddireddy wrote:
> Thank you for quick review. I will wait for other reviewers to review 
> patch 2 & 3.
> I will address all review comments and sendnew revision.
> 
> On 11/24/2022 2:15 PM, Krzysztof Kozlowski wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 24/11/2022 09:35, Manikanta Maddireddy wrote:
>>> Tegra234 supports PCIe lane margining. P2U HW acts as a relay to exchange
>> typo: merging?
> It is not typo, it is PCIe feature lane margining.
> https://pcisig.com/pushing-limits-understanding-lane-margining-pcie%C2%AE
>>
>>> margin control data and margin status between PCIe controller and UPHY.
>> Please use scripts/get_maintainers.pl to get a list of necessary people
>> and lists to CC.  It might happen, that command when run on an older
>> kernel, gives you outdated entries.  Therefore please be sure you base
>> your patches on recent Linux kernel.
> I verified these patches on 6.0.0-rc6 kernel and executed get_maintainers.pl
> script on it. Did I miss anyone here?

Yes. At least Rob, maybe more. You need to CC all
maintainers/reviewers/supporters and all mailing lists.

It's not my task to verify each of these addresses to check whether you
really missed someone or not. I spotted at least one missing address so
just run get_maintainers.pl and use all entries from there.


>>
>>
>>> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
>>> ---
>>>   .../bindings/phy/phy-tegra194-p2u.yaml        | 50 +++++++++++++++++++
>>>   1 file changed, 50 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>>> index 4dc5205d893b..0ba3f6a0b474 100644
>>> --- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>>> +++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>>> @@ -40,6 +40,51 @@ properties:
>>>     '#phy-cells':
>>>       const: 0
>>>
>>> +  interrupts:
>>> +    items:
>>> +      description: P2U interrupt for Gen4 lane margining functionality.
>> typo: merging?
> It is not typo, it is PCIe feature lane margining.
> https://pcisig.com/pushing-limits-understanding-lane-margining-pcie%C2%AE
>>
>>> +
>>> +  interrupt-names:
>>> +    items:
>>> +      - const: intr
>> Drop entire property, not really useful.
> In driver, I am using platform_get_irq_byname(), I will change it to 
> platform_get_irq()
> and drop this property.
>>
>>> +
>>> +  nvidia,bpmp:
>>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>>> +    description: Must contain a pair of phandles to BPMP controller node followed by P2U ID.
>>> +    items:
>>> +      - items:
>>> +          - description: phandle to BPMP controller node
>>> +          - description: P2U instance ID
>>> +            maximum: 24
>>> +
>>> +allOf:
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            enum:
>>> +              - nvidia,tegra194-p2u
>>> +    then:
>>> +      required:
>>> +        - reg
>>> +        - reg-names
>>> +        - '#phy-cells'
>> That's not how it should be done. You have only two variants here, so
>> add a "required:" block with above and only one if:then: clause for
>> interrupts and nvidia,bpmp.
>>
>> Requiring reg/reg-names/phy-cells should be in separate patch with its
>> own reasoning.
> Ok, I will create two separate patches and add if:then clause only for 
> tegra234.
> As per understanding final change will look like below, right?
> 
> 
> required:
>    - reg
>    - reg-names
>    - '#phy-cells'
> 
> allOf:
>    - if:
>        properties:
>          compatible:
>            contains:
>              enum:
>                - nvidia,tegra234-p2u
>      then:
>        required:
>          - interrupts
>          - nvidia,bpmp

yes

Best regards,
Krzysztof
Manikanta Maddireddy Nov. 30, 2022, 4:13 p.m. UTC | #4
On 11/30/2022 8:45 PM, Krzysztof Kozlowski wrote:
> External email: Use caution opening links or attachments
>
>
> On 30/11/2022 16:11, Manikanta Maddireddy wrote:
>> Thank you for quick review. I will wait for other reviewers to review
>> patch 2 & 3.
>> I will address all review comments and sendnew revision.
>>
>> On 11/24/2022 2:15 PM, Krzysztof Kozlowski wrote:
>>> External email: Use caution opening links or attachments
>>>
>>>
>>> On 24/11/2022 09:35, Manikanta Maddireddy wrote:
>>>> Tegra234 supports PCIe lane margining. P2U HW acts as a relay to exchange
>>> typo: merging?
>> It is not typo, it is PCIe feature lane margining.
>> https://pcisig.com/pushing-limits-understanding-lane-margining-pcie%C2%AE
>>>> margin control data and margin status between PCIe controller and UPHY.
>>> Please use scripts/get_maintainers.pl to get a list of necessary people
>>> and lists to CC.  It might happen, that command when run on an older
>>> kernel, gives you outdated entries.  Therefore please be sure you base
>>> your patches on recent Linux kernel.
>> I verified these patches on 6.0.0-rc6 kernel and executed get_maintainers.pl
>> script on it. Did I miss anyone here?
> Yes. At least Rob, maybe more. You need to CC all
> maintainers/reviewers/supporters and all mailing lists.
>
> It's not my task to verify each of these addresses to check whether you
> really missed someone or not. I spotted at least one missing address so
> just run get_maintainers.pl and use all entries from there.
I rechecked my "git send-email" command, I did add Rob's email. In my 
Linux file path, I found a file with name "--to=robh+dt@kernel.org".
I am not sure what mistake I made during "git send-email". I will do 
dry-run before sending v2.

I rechecked mailing list from get_maintainers.pl, I added everyone from 
the list expect Tegra developers who contributed to the file 
tegra234.dtsi, but not for PCIe.
>
>>>
>>>> Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
>>>> ---
>>>>    .../bindings/phy/phy-tegra194-p2u.yaml        | 50 +++++++++++++++++++
>>>>    1 file changed, 50 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>>>> index 4dc5205d893b..0ba3f6a0b474 100644
>>>> --- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>>>> +++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
>>>> @@ -40,6 +40,51 @@ properties:
>>>>      '#phy-cells':
>>>>        const: 0
>>>>
>>>> +  interrupts:
>>>> +    items:
>>>> +      description: P2U interrupt for Gen4 lane margining functionality.
>>> typo: merging?
>> It is not typo, it is PCIe feature lane margining.
>> https://pcisig.com/pushing-limits-understanding-lane-margining-pcie%C2%AE
>>>> +
>>>> +  interrupt-names:
>>>> +    items:
>>>> +      - const: intr
>>> Drop entire property, not really useful.
>> In driver, I am using platform_get_irq_byname(), I will change it to
>> platform_get_irq()
>> and drop this property.
>>>> +
>>>> +  nvidia,bpmp:
>>>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>>>> +    description: Must contain a pair of phandles to BPMP controller node followed by P2U ID.
>>>> +    items:
>>>> +      - items:
>>>> +          - description: phandle to BPMP controller node
>>>> +          - description: P2U instance ID
>>>> +            maximum: 24
>>>> +
>>>> +allOf:
>>>> +  - if:
>>>> +      properties:
>>>> +        compatible:
>>>> +          contains:
>>>> +            enum:
>>>> +              - nvidia,tegra194-p2u
>>>> +    then:
>>>> +      required:
>>>> +        - reg
>>>> +        - reg-names
>>>> +        - '#phy-cells'
>>> That's not how it should be done. You have only two variants here, so
>>> add a "required:" block with above and only one if:then: clause for
>>> interrupts and nvidia,bpmp.
>>>
>>> Requiring reg/reg-names/phy-cells should be in separate patch with its
>>> own reasoning.
>> Ok, I will create two separate patches and add if:then clause only for
>> tegra234.
>> As per understanding final change will look like below, right?
>>
>>
>> required:
>>     - reg
>>     - reg-names
>>     - '#phy-cells'
>>
>> allOf:
>>     - if:
>>         properties:
>>           compatible:
>>             contains:
>>               enum:
>>                 - nvidia,tegra234-p2u
>>       then:
>>         required:
>>           - interrupts
>>           - nvidia,bpmp
> yes
>
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
index 4dc5205d893b..0ba3f6a0b474 100644
--- a/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-tegra194-p2u.yaml
@@ -40,6 +40,51 @@  properties:
   '#phy-cells':
     const: 0
 
+  interrupts:
+    items:
+      description: P2U interrupt for Gen4 lane margining functionality.
+
+  interrupt-names:
+    items:
+      - const: intr
+
+  nvidia,bpmp:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: Must contain a pair of phandles to BPMP controller node followed by P2U ID.
+    items:
+      - items:
+          - description: phandle to BPMP controller node
+          - description: P2U instance ID
+            maximum: 24
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra194-p2u
+    then:
+      required:
+        - reg
+        - reg-names
+        - '#phy-cells'
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nvidia,tegra234-p2u
+    then:
+      required:
+        - reg
+        - reg-names
+        - '#phy-cells'
+        - interrupts
+        - interrupt-names
+        - nvidia,bpmp
+
 additionalProperties: false
 
 examples:
@@ -49,5 +94,10 @@  examples:
         reg = <0x03e10000 0x10000>;
         reg-names = "ctl";
 
+        interrupts = <0 337 0x04>;
+        interrupt-names = "intr";
+
+        nvidia,bpmp = <&bpmp 1>;
+
         #phy-cells = <0>;
     };