diff mbox series

[v1,08/13] ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensor

Message ID 20210711234403.24691-9-digetx@gmail.com
State Superseded
Headers show
Series Tegra ARM32 device-tree improvements for 5.15 | expand

Commit Message

Dmitry Osipenko July 11, 2021, 11:43 p.m. UTC 
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index d9dd11569d4b..448f1397e64a 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -348,7 +348,7 @@  nct1008: temperature-sensor@4c {
 			reg = <0x4c>;
 			vcc-supply = <&sys_3v3_reg>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_EDGE_FALLING>;
 			#thermal-sensor-cells = <1>;
 		};