diff mbox series

[v1,09/13] ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensor

Message ID 20210711234403.24691-10-digetx@gmail.com
State Superseded
Headers show
Series Tegra ARM32 device-tree improvements for 5.15 | expand

Commit Message

Dmitry Osipenko July 11, 2021, 11:43 p.m. UTC 
The LM90 temperature sensor should use edge-triggered interrupt because
LM90 hardware doesn't deassert interrupt line until temperature is back
to normal state, which results in interrupt storm. Correct the interrupt
trigger type.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra114-dalmore.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index c04162ddec3c..7fd901f8d39a 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -788,7 +788,7 @@  temperature-sensor@4c {
 			reg = <0x4c>;
 			vcc-supply = <&palmas_ldo6_reg>;
 			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_EDGE_FALLING>;
 		};
 	};