diff mbox series

[RESEND,v4,1/4] dt-bindings: mfd: Add ENE KB930 Embedded Controller binding

Message ID 20201025230153.11729-2-digetx@gmail.com
State Changes Requested
Headers show
Series Introduce Embedded Controller driver for Acer A500 | expand

Commit Message

Dmitry Osipenko Oct. 25, 2020, 11:01 p.m. UTC
Add binding document for the ENE KB930 Embedded Controller.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../devicetree/bindings/mfd/ene-kb930.yaml    | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb930.yaml

Comments

Rob Herring (Arm) Oct. 26, 2020, 12:54 p.m. UTC | #1
On Mon, 26 Oct 2020 02:01:50 +0300, Dmitry Osipenko wrote:
> Add binding document for the ENE KB930 Embedded Controller.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  .../devicetree/bindings/mfd/ene-kb930.yaml    | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/ene-kb930.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/mfd/ene-kb930.yaml:20:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/mfd/ene-kb930.yaml:22:9: [warning] wrong indentation: expected 10 but found 8 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mfd/ene-kb930.example.dt.yaml: battery-cell: 'operating-range-celsius' does not match any of the regexes: '^ocv-capacity-table-[0-9]+$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/power/supply/battery.yaml


See https://patchwork.ozlabs.org/patch/1387346

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/ene-kb930.yaml b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
new file mode 100644
index 000000000000..635c8966ca22
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ene-kb930.yaml
@@ -0,0 +1,66 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB930 Embedded Controller bindings
+
+description: |
+  This binding describes the ENE KB930 Embedded Controller attached to an
+  I2C bus.
+
+maintainers:
+  - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - acer,a500-iconia-ec # Acer A500 Iconia tablet device
+      - enum:
+        - ene,kb930
+  reg:
+    maxItems: 1
+
+  monitored-battery: true
+  power-supplies: true
+  system-power-controller: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    battery: battery-cell {
+      compatible = "simple-battery";
+      charge-full-design-microamp-hours = <3260000>;
+      energy-full-design-microwatt-hours = <24000000>;
+      operating-range-celsius = <0 40>;
+    };
+
+    mains: ac-adapter {
+      compatible = "gpio-charger";
+      charger-type = "mains";
+      gpios = <&gpio 125 0>;
+    };
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      embedded-controller@58 {
+        compatible = "acer,a500-iconia-ec", "ene,kb930";
+        reg = <0x58>;
+
+        system-power-controller;
+
+        monitored-battery = <&battery>;
+        power-supplies = <&mains>;
+      };
+    };
+
+...