@@ -466,10 +466,24 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
return err;
}
+static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev,
+ u32 reg, u32 mask, u32 delay_us,
+ u32 timeout_us)
+{
+ void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg);
+ u32 val;
+
+ if (!i2c_dev->is_curr_atomic_xfer)
+ return readl_relaxed_poll_timeout(addr, val, !(val & mask),
+ delay_us, timeout_us);
+
+ return readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask),
+ delay_us, timeout_us);
+}
+
static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
{
- u32 mask, val, offset, reg_offset;
- void __iomem *addr;
+ u32 mask, val, offset;
int err;
if (i2c_dev->hw->has_mst_fifo) {
@@ -486,16 +500,7 @@ static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
val |= mask;
i2c_writel(i2c_dev, val, offset);
- reg_offset = tegra_i2c_reg_addr(i2c_dev, offset);
- addr = i2c_dev->base + reg_offset;
-
- if (i2c_dev->is_curr_atomic_xfer)
- err = readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask),
- 1000, 1000000);
- else
- err = readl_relaxed_poll_timeout(addr, val, !(val & mask),
- 1000, 1000000);
-
+ err = tegra_i2c_poll_register(i2c_dev, offset, mask, 1000, 1000000);
if (err) {
dev_err(i2c_dev->dev, "failed to flush FIFO\n");
return err;
@@ -695,25 +700,15 @@ static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
{
- unsigned long reg_offset;
- void __iomem *addr;
- u32 val;
int err;
if (!i2c_dev->hw->has_config_load_reg)
return 0;
- reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
- addr = i2c_dev->base + reg_offset;
i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
- if (i2c_dev->is_curr_atomic_xfer)
- err = readl_relaxed_poll_timeout_atomic(addr, val, val == 0, 1000,
- I2C_CONFIG_LOAD_TIMEOUT);
- else
- err = readl_relaxed_poll_timeout(addr, val, val == 0, 1000,
- I2C_CONFIG_LOAD_TIMEOUT);
-
+ err = tegra_i2c_poll_register(i2c_dev, I2C_CONFIG_LOAD, 0xffffffff,
+ 1000, I2C_CONFIG_LOAD_TIMEOUT);
if (err) {
dev_warn(i2c_dev->dev, "timeout waiting for config load\n");
return err;
Factor out register polling into a separate function in order to remove boilerplate code and make code cleaner. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> --- drivers/i2c/busses/i2c-tegra.c | 43 +++++++++++++++------------------- 1 file changed, 19 insertions(+), 24 deletions(-)