diff mbox series

[08/19] PCI: xilinx: Use pci_is_root_bus() to check if bus is root bus

Message ID 20200722022514.1283916-9-robh@kernel.org
State Not Applicable
Headers show
Series PCI: Another round of host clean-ups | expand

Commit Message

Rob Herring July 22, 2020, 2:25 a.m. UTC
Use pci_is_root_bus() rather than tracking the root bus number to
determine if the bus is the root bus or not. This removes storing
duplicated data as well as the need for the host bridge driver to have
to care about the bus numbers in most cases.

There was also a bug that the root_busno is never set which means the
root bus number is always 0 even if the DT said something else.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 drivers/pci/controller/pcie-xilinx.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-xilinx.c b/drivers/pci/controller/pcie-xilinx.c
index cce67cb8fb2b..7bf80f68efa9 100644
--- a/drivers/pci/controller/pcie-xilinx.c
+++ b/drivers/pci/controller/pcie-xilinx.c
@@ -98,7 +98,6 @@ 
  * @reg_base: IO Mapped Register Base
  * @irq: Interrupt number
  * @msi_pages: MSI pages
- * @root_busno: Root Bus number
  * @dev: Device pointer
  * @msi_domain: MSI IRQ domain pointer
  * @leg_domain: Legacy IRQ domain pointer
@@ -108,7 +107,6 @@  struct xilinx_pcie_port {
 	void __iomem *reg_base;
 	u32 irq;
 	unsigned long msi_pages;
-	u8 root_busno;
 	struct device *dev;
 	struct irq_domain *msi_domain;
 	struct irq_domain *leg_domain;
@@ -162,14 +160,13 @@  static bool xilinx_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
 	struct xilinx_pcie_port *port = bus->sysdata;
 
 	/* Check if link is up when trying to access downstream ports */
-	if (bus->number != port->root_busno)
+	if (!pci_is_root_bus(bus)) {
 		if (!xilinx_pcie_link_up(port))
 			return false;
-
-	/* Only one device down on each root port */
-	if (bus->number == port->root_busno && devfn > 0)
+	} else if (devfn > 0) {
+		/* Only one device down on each root port */
 		return false;
-
+	}
 	return true;
 }