diff mbox series

[2/2] clk: tegra: Always program PLL_E when enabled

Message ID 20200603111923.3545261-2-thierry.reding@gmail.com
State Accepted
Headers show
Series [1/2] clk: tegra: Capitalization fixes | expand

Commit Message

Thierry Reding June 3, 2020, 11:19 a.m. UTC
From: Thierry Reding <treding@nvidia.com>

Commit bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
added checks to avoid enabling PLLs that have already been enabled by
the bootloader. However, the PLL_E configuration inherited from the
bootloader isn't necessarily the one that is needed for the kernel.

This can cause SATA to fail like this:

    [    5.310270] phy phy-sata.6: phy poweron failed --> -110
    [    5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
    [    5.323022] tegra-ahci: probe of 70027000.sata failed with error -110

Fix this by always programming the PLL_E. This ensures that any mis-
configuration by the bootloader will be overwritten by the kernel.

Fixes: bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
Reported-by: LABBE Corentin <clabbe@baylibre.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 drivers/clk/tegra/clk-pll.c | 3 ---
 1 file changed, 3 deletions(-)

Comments

Corentin LABBE June 3, 2020, 1:13 p.m. UTC | #1
On Wed, Jun 03, 2020 at 01:19:23PM +0200, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
> 
> Commit bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
> added checks to avoid enabling PLLs that have already been enabled by
> the bootloader. However, the PLL_E configuration inherited from the
> bootloader isn't necessarily the one that is needed for the kernel.
> 
> This can cause SATA to fail like this:
> 
>     [    5.310270] phy phy-sata.6: phy poweron failed --> -110
>     [    5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
>     [    5.323022] tegra-ahci: probe of 70027000.sata failed with error -110
> 
> Fix this by always programming the PLL_E. This ensures that any mis-
> configuration by the bootloader will be overwritten by the kernel.
> 
> Fixes: bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
> Reported-by: LABBE Corentin <clabbe@baylibre.com>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  drivers/clk/tegra/clk-pll.c | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
> index 583d2ac61e9e..b2d39a66f0fa 100644
> --- a/drivers/clk/tegra/clk-pll.c
> +++ b/drivers/clk/tegra/clk-pll.c
> @@ -1601,9 +1601,6 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
>  	unsigned long flags = 0;
>  	unsigned long input_rate;
>  
> -	if (clk_pll_is_enabled(hw))
> -		return 0;
> -
>  	input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
>  
>  	if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate))
> -- 
> 2.24.1
> 

Tested-by: Corentin Labbe <clabbe@baylibre.com>

Thanks
Dmitry Osipenko June 3, 2020, 2:04 p.m. UTC | #2
03.06.2020 14:19, Thierry Reding пишет:
> From: Thierry Reding <treding@nvidia.com>
> 
> Commit bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
> added checks to avoid enabling PLLs that have already been enabled by
> the bootloader. However, the PLL_E configuration inherited from the
> bootloader isn't necessarily the one that is needed for the kernel.
> 
> This can cause SATA to fail like this:
> 
>     [    5.310270] phy phy-sata.6: phy poweron failed --> -110
>     [    5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
>     [    5.323022] tegra-ahci: probe of 70027000.sata failed with error -110
> 
> Fix this by always programming the PLL_E. This ensures that any mis-
> configuration by the bootloader will be overwritten by the kernel.
> 
> Fixes: bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
> Reported-by: LABBE Corentin <clabbe@baylibre.com>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
>  drivers/clk/tegra/clk-pll.c | 3 ---
>  1 file changed, 3 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
> index 583d2ac61e9e..b2d39a66f0fa 100644
> --- a/drivers/clk/tegra/clk-pll.c
> +++ b/drivers/clk/tegra/clk-pll.c
> @@ -1601,9 +1601,6 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw)
>  	unsigned long flags = 0;
>  	unsigned long input_rate;
>  
> -	if (clk_pll_is_enabled(hw))
> -		return 0;
> -
>  	input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
>  
>  	if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate))
> 

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Stephen Boyd June 23, 2020, 2:07 a.m. UTC | #3
Quoting Thierry Reding (2020-06-03 04:19:23)
> From: Thierry Reding <treding@nvidia.com>
> 
> Commit bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
> added checks to avoid enabling PLLs that have already been enabled by
> the bootloader. However, the PLL_E configuration inherited from the
> bootloader isn't necessarily the one that is needed for the kernel.
> 
> This can cause SATA to fail like this:
> 
>     [    5.310270] phy phy-sata.6: phy poweron failed --> -110
>     [    5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110
>     [    5.323022] tegra-ahci: probe of 70027000.sata failed with error -110
> 
> Fix this by always programming the PLL_E. This ensures that any mis-
> configuration by the bootloader will be overwritten by the kernel.
> 
> Fixes: bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs")
> Reported-by: LABBE Corentin <clabbe@baylibre.com>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---

Acked-by: Stephen Boyd <sboyd@kernel.org>
diff mbox series

Patch

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 583d2ac61e9e..b2d39a66f0fa 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -1601,9 +1601,6 @@  static int clk_plle_tegra114_enable(struct clk_hw *hw)
 	unsigned long flags = 0;
 	unsigned long input_rate;
 
-	if (clk_pll_is_enabled(hw))
-		return 0;
-
 	input_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
 
 	if (_get_table_rate(hw, &sel, pll->params->fixed_rate, input_rate))