diff mbox series

[v7,05/12] clk: tegra30: Use custom CCLK implementation

Message ID 20200212234607.11521-6-digetx@gmail.com
State Accepted
Headers show
Series NVIDIA Tegra20 CPUFreq driver major update | expand

Commit Message

Dmitry Osipenko Feb. 12, 2020, 11:46 p.m. UTC 
We're going to use the generic cpufreq-dt driver on Tegra30 and thus CCLK
intermediate re-parenting will be performed by the clock driver. There is
now special CCLK implementation that supports all CCLK quirks, this patch
makes Tegra30 SoCs to use that implementation.

Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/clk/tegra/clk-tegra30.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index b20891489e11..43b94175ff33 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -499,6 +499,8 @@  static struct tegra_clk_pll_params pll_x_params __ro_after_init = {
 	.freq_table = pll_x_freq_table,
 	.flags = TEGRA_PLL_HAS_CPCON | TEGRA_PLL_SET_DCCON |
 		 TEGRA_PLL_USE_LOCK | TEGRA_PLL_HAS_LOCK_ENABLE,
+	.pre_rate_change = tegra_cclk_pre_pllx_rate_change,
+	.post_rate_change = tegra_cclk_post_pllx_rate_change,
 };
 
 static struct tegra_clk_pll_params pll_e_params __ro_after_init = {
@@ -932,11 +934,11 @@  static void __init tegra30_super_clk_init(void)
 	clk_register_clkdev(clk, "pll_p_out4_cclkg", NULL);
 
 	/* CCLKG */
-	clk = tegra_clk_register_super_mux("cclk_g", cclk_g_parents,
+	clk = tegra_clk_register_super_cclk("cclk_g", cclk_g_parents,
 				  ARRAY_SIZE(cclk_g_parents),
 				  CLK_SET_RATE_PARENT,
 				  clk_base + CCLKG_BURST_POLICY,
-				  0, 4, 0, 0, NULL);
+				  0, NULL);
 	clks[TEGRA30_CLK_CCLK_G] = clk;
 
 	/*