diff mbox series

[for,5.6,v2] tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started

Message ID 20200209164415.9632-1-digetx@gmail.com
State New
Headers show
Series [for,5.6,v2] tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't started | expand

Commit Message

Dmitry Osipenko Feb. 9, 2020, 4:44 p.m. UTC
It is possible to get an instant RX timeout or end-of-transfer interrupt
before RX DMA was started, if transaction is less than 16 bytes. Transfer
should be handled in PIO mode in this case because DMA can't handle it.
This patch brings back the original behaviour of the driver that was
changed by accident by a previous commit, it fixes occasional Bluetooth HW
initialization failures which I started to notice recently.

Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request")
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---

Changelog:

v2: - Corrected commit's title by adding the accidentally missed "tegra: "
      to the prefix.

 drivers/tty/serial/serial-tegra.c | 35 ++++++++++++++-----------------
 1 file changed, 16 insertions(+), 19 deletions(-)

Comments

Jiri Slaby Feb. 17, 2020, 7:37 a.m. UTC | #1
On 09. 02. 20, 17:44, Dmitry Osipenko wrote:
> It is possible to get an instant RX timeout or end-of-transfer interrupt
> before RX DMA was started, if transaction is less than 16 bytes. Transfer
> should be handled in PIO mode in this case because DMA can't handle it.
> This patch brings back the original behaviour of the driver that was
> changed by accident by a previous commit, it fixes occasional Bluetooth HW
> initialization failures which I started to notice recently.
> 
> Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request")
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> 
> Changelog:
> 
> v2: - Corrected commit's title by adding the accidentally missed "tegra: "
>       to the prefix.
> 
>  drivers/tty/serial/serial-tegra.c | 35 ++++++++++++++-----------------
>  1 file changed, 16 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
> index 33034b852a51..8de8bac9c6c7 100644
> --- a/drivers/tty/serial/serial-tegra.c
> +++ b/drivers/tty/serial/serial-tegra.c
> @@ -692,11 +692,22 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
>  				   count, DMA_TO_DEVICE);
>  }
>  
> +static void do_handle_rx_pio(struct tegra_uart_port *tup)
> +{
> +	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
> +	struct tty_port *port = &tup->uport.state->port;
> +
> +	tegra_uart_handle_rx_pio(tup, port);
> +	if (tty) {

What's the tty good for here, actually?

> +		tty_flip_buffer_push(port);
> +		tty_kref_put(tty);
> +	}
> +}


thanks,
Dmitry Osipenko Feb. 19, 2020, 12:25 p.m. UTC | #2
17.02.2020 10:37, Jiri Slaby пишет:
> On 09. 02. 20, 17:44, Dmitry Osipenko wrote:
>> It is possible to get an instant RX timeout or end-of-transfer interrupt
>> before RX DMA was started, if transaction is less than 16 bytes. Transfer
>> should be handled in PIO mode in this case because DMA can't handle it.
>> This patch brings back the original behaviour of the driver that was
>> changed by accident by a previous commit, it fixes occasional Bluetooth HW
>> initialization failures which I started to notice recently.
>>
>> Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request")
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>>
>> Changelog:
>>
>> v2: - Corrected commit's title by adding the accidentally missed "tegra: "
>>       to the prefix.
>>
>>  drivers/tty/serial/serial-tegra.c | 35 ++++++++++++++-----------------
>>  1 file changed, 16 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
>> index 33034b852a51..8de8bac9c6c7 100644
>> --- a/drivers/tty/serial/serial-tegra.c
>> +++ b/drivers/tty/serial/serial-tegra.c
>> @@ -692,11 +692,22 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
>>  				   count, DMA_TO_DEVICE);
>>  }
>>  
>> +static void do_handle_rx_pio(struct tegra_uart_port *tup)
>> +{
>> +	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
>> +	struct tty_port *port = &tup->uport.state->port;
>> +
>> +	tegra_uart_handle_rx_pio(tup, port);
>> +	if (tty) {
> 
> What's the tty good for here, actually?
> 
>> +		tty_flip_buffer_push(port);
>> +		tty_kref_put(tty);
>> +	}
>> +}

I'm not really a TTY expert..

Jon, maybe you have any clue whether TTY could disappear while port is
opened?
Jon Hunter Feb. 19, 2020, 2:38 p.m. UTC | #3
On 19/02/2020 12:25, Dmitry Osipenko wrote:
> 17.02.2020 10:37, Jiri Slaby пишет:
>> On 09. 02. 20, 17:44, Dmitry Osipenko wrote:
>>> It is possible to get an instant RX timeout or end-of-transfer interrupt
>>> before RX DMA was started, if transaction is less than 16 bytes. Transfer
>>> should be handled in PIO mode in this case because DMA can't handle it.
>>> This patch brings back the original behaviour of the driver that was
>>> changed by accident by a previous commit, it fixes occasional Bluetooth HW
>>> initialization failures which I started to notice recently.
>>>
>>> Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request")
>>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>>> ---
>>>
>>> Changelog:
>>>
>>> v2: - Corrected commit's title by adding the accidentally missed "tegra: "
>>>       to the prefix.
>>>
>>>  drivers/tty/serial/serial-tegra.c | 35 ++++++++++++++-----------------
>>>  1 file changed, 16 insertions(+), 19 deletions(-)
>>>
>>> diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
>>> index 33034b852a51..8de8bac9c6c7 100644
>>> --- a/drivers/tty/serial/serial-tegra.c
>>> +++ b/drivers/tty/serial/serial-tegra.c
>>> @@ -692,11 +692,22 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
>>>  				   count, DMA_TO_DEVICE);
>>>  }
>>>  
>>> +static void do_handle_rx_pio(struct tegra_uart_port *tup)
>>> +{
>>> +	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
>>> +	struct tty_port *port = &tup->uport.state->port;
>>> +
>>> +	tegra_uart_handle_rx_pio(tup, port);
>>> +	if (tty) {
>>
>> What's the tty good for here, actually?
>>
>>> +		tty_flip_buffer_push(port);
>>> +		tty_kref_put(tty);
>>> +	}
>>> +}
> 
> I'm not really a TTY expert..
> 
> Jon, maybe you have any clue whether TTY could disappear while port is
> opened?

Nothing specific that I am aware of. The function tty_kref_get() appears
to check that the tty pointer is valid and so it would seem logical to
check here as well. But happy to be corrected :-)

Jon
Dmitry Osipenko Feb. 21, 2020, 7:10 p.m. UTC | #4
19.02.2020 17:38, Jon Hunter пишет:
> 
> On 19/02/2020 12:25, Dmitry Osipenko wrote:
>> 17.02.2020 10:37, Jiri Slaby пишет:
>>> On 09. 02. 20, 17:44, Dmitry Osipenko wrote:
>>>> It is possible to get an instant RX timeout or end-of-transfer interrupt
>>>> before RX DMA was started, if transaction is less than 16 bytes. Transfer
>>>> should be handled in PIO mode in this case because DMA can't handle it.
>>>> This patch brings back the original behaviour of the driver that was
>>>> changed by accident by a previous commit, it fixes occasional Bluetooth HW
>>>> initialization failures which I started to notice recently.
>>>>
>>>> Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request")
>>>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>>>> ---
>>>>
>>>> Changelog:
>>>>
>>>> v2: - Corrected commit's title by adding the accidentally missed "tegra: "
>>>>       to the prefix.
>>>>
>>>>  drivers/tty/serial/serial-tegra.c | 35 ++++++++++++++-----------------
>>>>  1 file changed, 16 insertions(+), 19 deletions(-)
>>>>
>>>> diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
>>>> index 33034b852a51..8de8bac9c6c7 100644
>>>> --- a/drivers/tty/serial/serial-tegra.c
>>>> +++ b/drivers/tty/serial/serial-tegra.c
>>>> @@ -692,11 +692,22 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
>>>>  				   count, DMA_TO_DEVICE);
>>>>  }
>>>>  
>>>> +static void do_handle_rx_pio(struct tegra_uart_port *tup)
>>>> +{
>>>> +	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
>>>> +	struct tty_port *port = &tup->uport.state->port;
>>>> +
>>>> +	tegra_uart_handle_rx_pio(tup, port);
>>>> +	if (tty) {
>>>
>>> What's the tty good for here, actually?
>>>
>>>> +		tty_flip_buffer_push(port);
>>>> +		tty_kref_put(tty);
>>>> +	}
>>>> +}
>>
>> I'm not really a TTY expert..
>>
>> Jon, maybe you have any clue whether TTY could disappear while port is
>> opened?
> 
> Nothing specific that I am aware of. The function tty_kref_get() appears
> to check that the tty pointer is valid and so it would seem logical to
> check here as well. But happy to be corrected :-)

Okay, thanks.
diff mbox series

Patch

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 33034b852a51..8de8bac9c6c7 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -692,11 +692,22 @@  static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
 				   count, DMA_TO_DEVICE);
 }
 
+static void do_handle_rx_pio(struct tegra_uart_port *tup)
+{
+	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
+	struct tty_port *port = &tup->uport.state->port;
+
+	tegra_uart_handle_rx_pio(tup, port);
+	if (tty) {
+		tty_flip_buffer_push(port);
+		tty_kref_put(tty);
+	}
+}
+
 static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
 				      unsigned int residue)
 {
 	struct tty_port *port = &tup->uport.state->port;
-	struct tty_struct *tty = tty_port_tty_get(port);
 	unsigned int count;
 
 	async_tx_ack(tup->rx_dma_desc);
@@ -705,11 +716,7 @@  static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
 	/* If we are here, DMA is stopped */
 	tegra_uart_copy_rx_to_tty(tup, port, count);
 
-	tegra_uart_handle_rx_pio(tup, port);
-	if (tty) {
-		tty_flip_buffer_push(port);
-		tty_kref_put(tty);
-	}
+	do_handle_rx_pio(tup);
 }
 
 static void tegra_uart_rx_dma_complete(void *args)
@@ -749,8 +756,10 @@  static void tegra_uart_terminate_rx_dma(struct tegra_uart_port *tup)
 {
 	struct dma_tx_state state;
 
-	if (!tup->rx_dma_active)
+	if (!tup->rx_dma_active) {
+		do_handle_rx_pio(tup);
 		return;
+	}
 
 	dmaengine_terminate_all(tup->rx_dma_chan);
 	dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
@@ -816,18 +825,6 @@  static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
 		uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
 }
 
-static void do_handle_rx_pio(struct tegra_uart_port *tup)
-{
-	struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
-	struct tty_port *port = &tup->uport.state->port;
-
-	tegra_uart_handle_rx_pio(tup, port);
-	if (tty) {
-		tty_flip_buffer_push(port);
-		tty_kref_put(tty);
-	}
-}
-
 static irqreturn_t tegra_uart_isr(int irq, void *data)
 {
 	struct tegra_uart_port *tup = data;