| Message ID | 20190107032810.13522-2-josephl@nvidia.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Add CPUidle support for Tegra210 | expand |
On Mon, 7 Jan 2019 11:28:05 +0800, Joseph Lo wrote: > The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit > timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived > from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock > (TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic, > or watchdog interrupts. > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: linux-kernel@vger.kernel.org > Cc: devicetree@vger.kernel.org > Signed-off-by: Joseph Lo <josephl@nvidia.com> > --- > .../bindings/timer/nvidia,tegra210-timer.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt > Reviewed-by: Rob Herring <robh@kernel.org>
On 07/01/2019 03:28, Joseph Lo wrote: > The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit > timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived > from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock > (TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic, > or watchdog interrupts. > > Cc: Daniel Lezcano <daniel.lezcano@linaro.org> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: linux-kernel@vger.kernel.org > Cc: devicetree@vger.kernel.org > Signed-off-by: Joseph Lo <josephl@nvidia.com> > --- > .../bindings/timer/nvidia,tegra210-timer.txt | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt > > diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt > new file mode 100644 > index 000000000000..ba511220a669 > --- /dev/null > +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt > @@ -0,0 +1,25 @@ > +NVIDIA Tegra210 timer > + > +The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit > +timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived > +from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock > +(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic, > +or watchdog interrupts. > + > +Required properties: > +- compatible : "nvidia,tegra210-timer". > +- reg : Specifies base physical address and size of the registers. > +- interrupts : A list of 4 interrupts; one per each of TMR10 through TMR13. Why do we only add the interrupts for TMR10 - TMR13? What about the others? Cheers Jon
Hi Jon, Thanks for reviewing. On 1/24/19 6:30 PM, Jon Hunter wrote: > > On 07/01/2019 03:28, Joseph Lo wrote: >> The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit >> timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived >> from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock >> (TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic, >> or watchdog interrupts. >> >> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> >> Cc: Thomas Gleixner <tglx@linutronix.de> >> Cc: linux-kernel@vger.kernel.org >> Cc: devicetree@vger.kernel.org >> Signed-off-by: Joseph Lo <josephl@nvidia.com> >> --- >> .../bindings/timer/nvidia,tegra210-timer.txt | 25 +++++++++++++++++++ >> 1 file changed, 25 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >> >> diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >> new file mode 100644 >> index 000000000000..ba511220a669 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >> @@ -0,0 +1,25 @@ >> +NVIDIA Tegra210 timer >> + >> +The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit >> +timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived >> +from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock >> +(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic, >> +or watchdog interrupts. >> + >> +Required properties: >> +- compatible : "nvidia,tegra210-timer". >> +- reg : Specifies base physical address and size of the registers. >> +- interrupts : A list of 4 interrupts; one per each of TMR10 through TMR13. > > Why do we only add the interrupts for TMR10 - TMR13? What about the others? > The others (TMR0-TMR9) are occupied for other usages. TMR5 is occupied for the watchdog timer in the upstream kernel. And others (still in TMR0-TMR9) are occupied for different usages in our downstream kernel. And notice that only TMR10-TMR13 are running at the oscillator clock (clk_m). With the Tegra210 timer driver, we introduce in this series, which only replace the clock event device function that was originally owned by the arch timer (armv8 timer) and it also running at the oscillator clock. The sched_timer still owns by the arch timer. So the timer resolution will be the same. That's why we choose TMR10-TMR13 as the timer for Tegra210. Thanks, Joseph
On 25/01/2019 03:23, Joseph Lo wrote: > Hi Jon, > > Thanks for reviewing. > > On 1/24/19 6:30 PM, Jon Hunter wrote: >> >> On 07/01/2019 03:28, Joseph Lo wrote: >>> The Tegra210 timer provides fourteen 29-bit timer counters and one >>> 32-bit >>> timestamp counter. The TMRs run at either a fixed 1 MHz clock rate >>> derived >>> from the oscillator clock (TMR0-TMR9) or directly at the oscillator >>> clock >>> (TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic, >>> or watchdog interrupts. >>> >>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> >>> Cc: Thomas Gleixner <tglx@linutronix.de> >>> Cc: linux-kernel@vger.kernel.org >>> Cc: devicetree@vger.kernel.org >>> Signed-off-by: Joseph Lo <josephl@nvidia.com> >>> --- >>> .../bindings/timer/nvidia,tegra210-timer.txt | 25 +++++++++++++++++++ >>> 1 file changed, 25 insertions(+) >>> create mode 100644 >>> Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>> >>> diff --git >>> a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>> b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>> new file mode 100644 >>> index 000000000000..ba511220a669 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>> @@ -0,0 +1,25 @@ >>> +NVIDIA Tegra210 timer >>> + >>> +The Tegra210 timer provides fourteen 29-bit timer counters and one >>> 32-bit >>> +timestamp counter. The TMRs run at either a fixed 1 MHz clock rate >>> derived >>> +from the oscillator clock (TMR0-TMR9) or directly at the oscillator >>> clock >>> +(TMR10-TMR13). Each TMR can be programmed to generate one-shot, >>> periodic, >>> +or watchdog interrupts. >>> + >>> +Required properties: >>> +- compatible : "nvidia,tegra210-timer". >>> +- reg : Specifies base physical address and size of the registers. >>> +- interrupts : A list of 4 interrupts; one per each of TMR10 through >>> TMR13. >> >> Why do we only add the interrupts for TMR10 - TMR13? What about the >> others? >> > > The others (TMR0-TMR9) are occupied for other usages. TMR5 is occupied > for the watchdog timer in the upstream kernel. And others (still in > TMR0-TMR9) are occupied for different usages in our downstream kernel. Where is TMR5 reserved for the watchdog? I don't see this? > And notice that only TMR10-TMR13 are running at the oscillator clock > (clk_m). With the Tegra210 timer driver, we introduce in this series, > which only replace the clock event device function that was originally > owned by the arch timer (armv8 timer) and it also running at the > oscillator clock. The sched_timer still owns by the arch timer. So the > timer resolution will be the same. That's why we choose TMR10-TMR13 as > the timer for Tegra210. That maybe fine, but DT should describe the hardware and so I don't see why we would not list all the interrupts. We can still only use TMR10-13 in the driver. Cheers Jon
On 25/01/2019 12:01, Jon Hunter wrote: > > On 25/01/2019 03:23, Joseph Lo wrote: >> Hi Jon, >> >> Thanks for reviewing. >> >> On 1/24/19 6:30 PM, Jon Hunter wrote: >>> >>> On 07/01/2019 03:28, Joseph Lo wrote: >>>> The Tegra210 timer provides fourteen 29-bit timer counters and one >>>> 32-bit >>>> timestamp counter. The TMRs run at either a fixed 1 MHz clock rate >>>> derived >>>> from the oscillator clock (TMR0-TMR9) or directly at the oscillator >>>> clock >>>> (TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic, >>>> or watchdog interrupts. >>>> >>>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> >>>> Cc: Thomas Gleixner <tglx@linutronix.de> >>>> Cc: linux-kernel@vger.kernel.org >>>> Cc: devicetree@vger.kernel.org >>>> Signed-off-by: Joseph Lo <josephl@nvidia.com> >>>> --- >>>> .../bindings/timer/nvidia,tegra210-timer.txt | 25 +++++++++++++++++++ >>>> 1 file changed, 25 insertions(+) >>>> create mode 100644 >>>> Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>>> b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>>> new file mode 100644 >>>> index 000000000000..ba511220a669 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>>> @@ -0,0 +1,25 @@ >>>> +NVIDIA Tegra210 timer >>>> + >>>> +The Tegra210 timer provides fourteen 29-bit timer counters and one >>>> 32-bit >>>> +timestamp counter. The TMRs run at either a fixed 1 MHz clock rate >>>> derived >>>> +from the oscillator clock (TMR0-TMR9) or directly at the oscillator >>>> clock >>>> +(TMR10-TMR13). Each TMR can be programmed to generate one-shot, >>>> periodic, >>>> +or watchdog interrupts. >>>> + >>>> +Required properties: >>>> +- compatible : "nvidia,tegra210-timer". >>>> +- reg : Specifies base physical address and size of the registers. >>>> +- interrupts : A list of 4 interrupts; one per each of TMR10 through >>>> TMR13. >>> >>> Why do we only add the interrupts for TMR10 - TMR13? What about the >>> others? >>> >> >> The others (TMR0-TMR9) are occupied for other usages. TMR5 is occupied >> for the watchdog timer in the upstream kernel. And others (still in >> TMR0-TMR9) are occupied for different usages in our downstream kernel. > > Where is TMR5 reserved for the watchdog? I don't see this? I see it now, it is hard-coded in the driver. I was looking at arm64 to see where it is used. Cheers Jon
On 1/25/19 8:01 PM, Jon Hunter wrote: > > On 25/01/2019 03:23, Joseph Lo wrote: >> Hi Jon, >> >> Thanks for reviewing. >> >> On 1/24/19 6:30 PM, Jon Hunter wrote: >>> >>> On 07/01/2019 03:28, Joseph Lo wrote: >>>> The Tegra210 timer provides fourteen 29-bit timer counters and one >>>> 32-bit >>>> timestamp counter. The TMRs run at either a fixed 1 MHz clock rate >>>> derived >>>> from the oscillator clock (TMR0-TMR9) or directly at the oscillator >>>> clock >>>> (TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic, >>>> or watchdog interrupts. >>>> >>>> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> >>>> Cc: Thomas Gleixner <tglx@linutronix.de> >>>> Cc: linux-kernel@vger.kernel.org >>>> Cc: devicetree@vger.kernel.org >>>> Signed-off-by: Joseph Lo <josephl@nvidia.com> >>>> --- >>>> .../bindings/timer/nvidia,tegra210-timer.txt | 25 +++++++++++++++++++ >>>> 1 file changed, 25 insertions(+) >>>> create mode 100644 >>>> Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>>> >>>> diff --git >>>> a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>>> b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>>> new file mode 100644 >>>> index 000000000000..ba511220a669 >>>> --- /dev/null >>>> +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt >>>> @@ -0,0 +1,25 @@ >>>> +NVIDIA Tegra210 timer >>>> + >>>> +The Tegra210 timer provides fourteen 29-bit timer counters and one >>>> 32-bit >>>> +timestamp counter. The TMRs run at either a fixed 1 MHz clock rate >>>> derived >>>> +from the oscillator clock (TMR0-TMR9) or directly at the oscillator >>>> clock >>>> +(TMR10-TMR13). Each TMR can be programmed to generate one-shot, >>>> periodic, >>>> +or watchdog interrupts. >>>> + >>>> +Required properties: >>>> +- compatible : "nvidia,tegra210-timer". >>>> +- reg : Specifies base physical address and size of the registers. >>>> +- interrupts : A list of 4 interrupts; one per each of TMR10 through >>>> TMR13. >>> [snip] >> And notice that only TMR10-TMR13 are running at the oscillator clock >> (clk_m). With the Tegra210 timer driver, we introduce in this series, >> which only replace the clock event device function that was originally >> owned by the arch timer (armv8 timer) and it also running at the >> oscillator clock. The sched_timer still owns by the arch timer. So the >> timer resolution will be the same. That's why we choose TMR10-TMR13 as >> the timer for Tegra210. > > That maybe fine, but DT should describe the hardware and so I don't see > why we would not list all the interrupts. We can still only use TMR10-13 > in the driver. > Okay, will list all the interrupts for each timer channel. Thanks, Joseph
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt new file mode 100644 index 000000000000..ba511220a669 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt @@ -0,0 +1,25 @@ +NVIDIA Tegra210 timer + +The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit +timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived +from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock +(TMR10-TMR13). Each TMR can be programmed to generate one-shot, periodic, +or watchdog interrupts. + +Required properties: +- compatible : "nvidia,tegra210-timer". +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 4 interrupts; one per each of TMR10 through TMR13. +- clocks : Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. + +timer@60005000 { + compatible = "nvidia,tegra210-timer"; + reg = <0x0 0x60005000 0x0 0x400>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_TIMER>; + clock-names = "timer"; +};
The Tegra210 timer provides fourteen 29-bit timer counters and one 32-bit timestamp counter. The TMRs run at either a fixed 1 MHz clock rate derived from the oscillator clock (TMR0-TMR9) or directly at the oscillator clock (TMR10-TMR13). Each TMR can be programmed to generate one-shot periodic, or watchdog interrupts. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Joseph Lo <josephl@nvidia.com> --- .../bindings/timer/nvidia,tegra210-timer.txt | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/nvidia,tegra210-timer.txt