| Message ID | 20160621184640.19885-1-swarren@wwwdotorg.org |
|---|---|
| State | Deferred |
| Headers | show |
On Tue, Jun 21, 2016 at 12:46:40PM -0600, Stephen Warren wrote: > From: Stephen Warren <swarren@nvidia.com> > > The value that should be programmed into the PADS_REFCLK register varies > per SoC. Fix the Tegra PCIe driver to program the correct values. Future > SoCs will require different values in cfg0/1, so the two values are stored > separately in the per-SoC data structures. > > For reference, the values are all documented in NV bug 1771116 comment 20. > Rhe ASIC team has validated all these values, except for the Tegra20 value > which is simply left unchanged in this patch. > > Signed-off-by: Stephen Warren <swarren@nvidia.com> > --- > drivers/pci/host/pci-tegra.c | 20 ++++++++------------ > 1 file changed, 8 insertions(+), 12 deletions(-) > > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > index c388468c202a..74887fedc3d4 100644 > --- a/drivers/pci/host/pci-tegra.c > +++ b/drivers/pci/host/pci-tegra.c > @@ -228,15 +228,6 @@ > #define PADS_REFCLK_CFG_PREDI_SHIFT 8 /* 11:8 */ > #define PADS_REFCLK_CFG_DRVI_SHIFT 12 /* 15:12 */ > > -/* Default value provided by HW engineering is 0xfa5c */ > -#define PADS_REFCLK_CFG_VALUE \ > - ( \ > - (0x17 << PADS_REFCLK_CFG_TERM_SHIFT) | \ > - (0 << PADS_REFCLK_CFG_E_TERM_SHIFT) | \ > - (0xa << PADS_REFCLK_CFG_PREDI_SHIFT) | \ > - (0xf << PADS_REFCLK_CFG_DRVI_SHIFT) \ > - ) > - > struct tegra_msi { > struct msi_controller chip; > DECLARE_BITMAP(used, INT_PCI_MSI_NR); > @@ -252,6 +243,8 @@ struct tegra_pcie_soc_data { > unsigned int msi_base_shift; > u32 pads_pll_ctl; > u32 tx_ref_sel; > + u32 pads_refclk_cfg0; > + u32 pads_refclk_cfg1; > bool has_pex_clkreq_en; > bool has_pex_bias_ctrl; > bool has_intr_prsnt_sense; > @@ -839,10 +832,9 @@ static int tegra_pcie_phy_enable(struct tegra_pcie *pcie) > pads_writel(pcie, value, soc->pads_pll_ctl); > > /* Configure the reference clock driver */ > - value = PADS_REFCLK_CFG_VALUE | (PADS_REFCLK_CFG_VALUE << 16); > - pads_writel(pcie, value, PADS_REFCLK_CFG0); > + pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0); > if (soc->num_ports > 2) > - pads_writel(pcie, PADS_REFCLK_CFG_VALUE, PADS_REFCLK_CFG1); > + pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1); > > /* wait for the PLL to lock */ > err = tegra_pcie_pll_wait(pcie, 500); > @@ -2078,6 +2070,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = { > .msi_base_shift = 0, > .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, > + .pads_refclk_cfg0 = 0xfa5cfa5c, > .has_pex_clkreq_en = false, > .has_pex_bias_ctrl = false, > .has_intr_prsnt_sense = false, > @@ -2090,6 +2083,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = { > .msi_base_shift = 8, > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > + .pads_refclk_cfg0 = 0xfa5cfa5c, > + .pads_refclk_cfg1 = 0xfa5cfa5c, > .has_pex_clkreq_en = true, > .has_pex_bias_ctrl = true, > .has_intr_prsnt_sense = true, > @@ -2102,6 +2097,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = { > .msi_base_shift = 8, > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > + .pads_refclk_cfg0 = 0x44ac44ac, > .has_pex_clkreq_en = true, > .has_pex_bias_ctrl = true, > .has_intr_prsnt_sense = true, I think it'd be nice to have these decoded into their individual fields, to reduce the magic. We already define the register fields, so it seems sensible to use them. Thierry
On 06/22/2016 06:57 AM, Thierry Reding wrote: > On Tue, Jun 21, 2016 at 12:46:40PM -0600, Stephen Warren wrote: >> From: Stephen Warren <swarren@nvidia.com> >> >> The value that should be programmed into the PADS_REFCLK register varies >> per SoC. Fix the Tegra PCIe driver to program the correct values. Future >> SoCs will require different values in cfg0/1, so the two values are stored >> separately in the per-SoC data structures. >> >> For reference, the values are all documented in NV bug 1771116 comment 20. >> Rhe ASIC team has validated all these values, except for the Tegra20 value >> which is simply left unchanged in this patch. >> diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c >> @@ -2078,6 +2070,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = { >> .msi_base_shift = 0, >> .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, >> .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, >> + .pads_refclk_cfg0 = 0xfa5cfa5c, >> .has_pex_clkreq_en = false, >> .has_pex_bias_ctrl = false, >> .has_intr_prsnt_sense = false, >> @@ -2090,6 +2083,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = { >> .msi_base_shift = 8, >> .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, >> .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, >> + .pads_refclk_cfg0 = 0xfa5cfa5c, >> + .pads_refclk_cfg1 = 0xfa5cfa5c, >> .has_pex_clkreq_en = true, >> .has_pex_bias_ctrl = true, >> .has_intr_prsnt_sense = true, >> @@ -2102,6 +2097,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = { >> .msi_base_shift = 8, >> .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, >> .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, >> + .pads_refclk_cfg0 = 0x44ac44ac, >> .has_pex_clkreq_en = true, >> .has_pex_bias_ctrl = true, >> .has_intr_prsnt_sense = true, > > I think it'd be nice to have these decoded into their individual fields, > to reduce the magic. We already define the register fields, so it seems > sensible to use them. I did consider that. However, the specification from the ASIC team is always the raw values. Decoding them into bitfields is only going to make it harder to verify whether the correct values are present (since the reader has to manually expand the math), and introduce the possibility of errors during the expansion process. I think using raw numbers is better in this case. -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jun 22, 2016 at 09:34:21AM -0600, Stephen Warren wrote: > On 06/22/2016 06:57 AM, Thierry Reding wrote: > > On Tue, Jun 21, 2016 at 12:46:40PM -0600, Stephen Warren wrote: > > > From: Stephen Warren <swarren@nvidia.com> > > > > > > The value that should be programmed into the PADS_REFCLK register varies > > > per SoC. Fix the Tegra PCIe driver to program the correct values. Future > > > SoCs will require different values in cfg0/1, so the two values are stored > > > separately in the per-SoC data structures. > > > > > > For reference, the values are all documented in NV bug 1771116 comment 20. > > > Rhe ASIC team has validated all these values, except for the Tegra20 value > > > which is simply left unchanged in this patch. > > > > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > > > > @@ -2078,6 +2070,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = { > > > .msi_base_shift = 0, > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, > > > + .pads_refclk_cfg0 = 0xfa5cfa5c, > > > .has_pex_clkreq_en = false, > > > .has_pex_bias_ctrl = false, > > > .has_intr_prsnt_sense = false, > > > @@ -2090,6 +2083,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = { > > > .msi_base_shift = 8, > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > > > + .pads_refclk_cfg0 = 0xfa5cfa5c, > > > + .pads_refclk_cfg1 = 0xfa5cfa5c, > > > .has_pex_clkreq_en = true, > > > .has_pex_bias_ctrl = true, > > > .has_intr_prsnt_sense = true, > > > @@ -2102,6 +2097,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = { > > > .msi_base_shift = 8, > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > > > + .pads_refclk_cfg0 = 0x44ac44ac, > > > .has_pex_clkreq_en = true, > > > .has_pex_bias_ctrl = true, > > > .has_intr_prsnt_sense = true, > > > > I think it'd be nice to have these decoded into their individual fields, > > to reduce the magic. We already define the register fields, so it seems > > sensible to use them. > > I did consider that. However, the specification from the ASIC team is always > the raw values. Decoding them into bitfields is only going to make it harder > to verify whether the correct values are present (since the reader has to > manually expand the math), and introduce the possibility of errors during > the expansion process. I think using raw numbers is better in this case. Alright, fine with me: Acked-by: Thierry Reding <treding@nvidia.com>
On Thu, Jun 23, 2016 at 10:44:48AM +0200, Thierry Reding wrote: > On Wed, Jun 22, 2016 at 09:34:21AM -0600, Stephen Warren wrote: > > On 06/22/2016 06:57 AM, Thierry Reding wrote: > > > On Tue, Jun 21, 2016 at 12:46:40PM -0600, Stephen Warren wrote: > > > > From: Stephen Warren <swarren@nvidia.com> > > > > > > > > The value that should be programmed into the PADS_REFCLK register varies > > > > per SoC. Fix the Tegra PCIe driver to program the correct values. Future > > > > SoCs will require different values in cfg0/1, so the two values are stored > > > > separately in the per-SoC data structures. > > > > > > > > For reference, the values are all documented in NV bug 1771116 comment 20. > > > > Rhe ASIC team has validated all these values, except for the Tegra20 value > > > > which is simply left unchanged in this patch. > > > > > > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > > > > > > @@ -2078,6 +2070,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = { > > > > .msi_base_shift = 0, > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, > > > > + .pads_refclk_cfg0 = 0xfa5cfa5c, > > > > .has_pex_clkreq_en = false, > > > > .has_pex_bias_ctrl = false, > > > > .has_intr_prsnt_sense = false, > > > > @@ -2090,6 +2083,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = { > > > > .msi_base_shift = 8, > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > > > > + .pads_refclk_cfg0 = 0xfa5cfa5c, > > > > + .pads_refclk_cfg1 = 0xfa5cfa5c, > > > > .has_pex_clkreq_en = true, > > > > .has_pex_bias_ctrl = true, > > > > .has_intr_prsnt_sense = true, > > > > @@ -2102,6 +2097,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = { > > > > .msi_base_shift = 8, > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > > > > + .pads_refclk_cfg0 = 0x44ac44ac, > > > > .has_pex_clkreq_en = true, > > > > .has_pex_bias_ctrl = true, > > > > .has_intr_prsnt_sense = true, > > > > > > I think it'd be nice to have these decoded into their individual fields, > > > to reduce the magic. We already define the register fields, so it seems > > > sensible to use them. > > > > I did consider that. However, the specification from the ASIC team is always > > the raw values. Decoding them into bitfields is only going to make it harder > > to verify whether the correct values are present (since the reader has to > > manually expand the math), and introduce the possibility of errors during > > the expansion process. I think using raw numbers is better in this case. > > Alright, fine with me: > > Acked-by: Thierry Reding <treding@nvidia.com> Hi Bjorn, I do have a couple of other patches, mostly minor cleanup and prep-work for 64-bit ARM support, that I'd like to get into v4.8. Would you mind if I took Stephen's patches into a branch and send it all out via pull request after it passed testing? Thierry
On Thu, 30 Jun 2016 15:20:01 +0200 Thierry Reding <thierry.reding@gmail.com> wrote: > On Thu, Jun 23, 2016 at 10:44:48AM +0200, Thierry Reding wrote: > > On Wed, Jun 22, 2016 at 09:34:21AM -0600, Stephen Warren wrote: > > > On 06/22/2016 06:57 AM, Thierry Reding wrote: > > > > On Tue, Jun 21, 2016 at 12:46:40PM -0600, Stephen Warren wrote: > > > > > From: Stephen Warren <swarren@nvidia.com> > > > > > > > > > > The value that should be programmed into the PADS_REFCLK register varies > > > > > per SoC. Fix the Tegra PCIe driver to program the correct values. Future > > > > > SoCs will require different values in cfg0/1, so the two values are stored > > > > > separately in the per-SoC data structures. > > > > > > > > > > For reference, the values are all documented in NV bug 1771116 comment 20. > > > > > Rhe ASIC team has validated all these values, except for the Tegra20 value > > > > > which is simply left unchanged in this patch. > > > > > > > > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > > > > > > > > @@ -2078,6 +2070,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = { > > > > > .msi_base_shift = 0, > > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, > > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, > > > > > + .pads_refclk_cfg0 = 0xfa5cfa5c, > > > > > .has_pex_clkreq_en = false, > > > > > .has_pex_bias_ctrl = false, > > > > > .has_intr_prsnt_sense = false, > > > > > @@ -2090,6 +2083,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = { > > > > > .msi_base_shift = 8, > > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > > > > > + .pads_refclk_cfg0 = 0xfa5cfa5c, > > > > > + .pads_refclk_cfg1 = 0xfa5cfa5c, > > > > > .has_pex_clkreq_en = true, > > > > > .has_pex_bias_ctrl = true, > > > > > .has_intr_prsnt_sense = true, > > > > > @@ -2102,6 +2097,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = { > > > > > .msi_base_shift = 8, > > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > > > > > + .pads_refclk_cfg0 = 0x44ac44ac, > > > > > .has_pex_clkreq_en = true, > > > > > .has_pex_bias_ctrl = true, > > > > > .has_intr_prsnt_sense = true, > > > > > > > > I think it'd be nice to have these decoded into their individual fields, > > > > to reduce the magic. We already define the register fields, so it seems > > > > sensible to use them. > > > > > > I did consider that. However, the specification from the ASIC team is always > > > the raw values. Decoding them into bitfields is only going to make it harder > > > to verify whether the correct values are present (since the reader has to > > > manually expand the math), and introduce the possibility of errors during > > > the expansion process. I think using raw numbers is better in this case. > > > > Alright, fine with me: > > > > Acked-by: Thierry Reding <treding@nvidia.com> > > Hi Bjorn, > > I do have a couple of other patches, mostly minor cleanup and prep-work > for 64-bit ARM support, that I'd like to get into v4.8. Would you mind > if I took Stephen's patches into a branch and send it all out via pull > request after it passed testing? Hi Theirry, Bjorn is on holiday and will be back at the beginning of the v4.8 merge window, assuming everything sticks to a regular schedule. I expect that anything that consolidates and prioritizes potential v4.8 content for easy evaluation on his return would be appreciated. Thanks, Alex -- To unsubscribe from this list: send the line "unsubscribe linux-tegra" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jun 30, 2016 at 09:35:23AM -0600, Alex Williamson wrote: > On Thu, 30 Jun 2016 15:20:01 +0200 > Thierry Reding <thierry.reding@gmail.com> wrote: > > > On Thu, Jun 23, 2016 at 10:44:48AM +0200, Thierry Reding wrote: > > > On Wed, Jun 22, 2016 at 09:34:21AM -0600, Stephen Warren wrote: > > > > On 06/22/2016 06:57 AM, Thierry Reding wrote: > > > > > On Tue, Jun 21, 2016 at 12:46:40PM -0600, Stephen Warren wrote: > > > > > > From: Stephen Warren <swarren@nvidia.com> > > > > > > > > > > > > The value that should be programmed into the PADS_REFCLK register varies > > > > > > per SoC. Fix the Tegra PCIe driver to program the correct values. Future > > > > > > SoCs will require different values in cfg0/1, so the two values are stored > > > > > > separately in the per-SoC data structures. > > > > > > > > > > > > For reference, the values are all documented in NV bug 1771116 comment 20. > > > > > > Rhe ASIC team has validated all these values, except for the Tegra20 value > > > > > > which is simply left unchanged in this patch. > > > > > > > > > > diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c > > > > > > > > > > @@ -2078,6 +2070,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = { > > > > > > .msi_base_shift = 0, > > > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, > > > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, > > > > > > + .pads_refclk_cfg0 = 0xfa5cfa5c, > > > > > > .has_pex_clkreq_en = false, > > > > > > .has_pex_bias_ctrl = false, > > > > > > .has_intr_prsnt_sense = false, > > > > > > @@ -2090,6 +2083,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = { > > > > > > .msi_base_shift = 8, > > > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > > > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > > > > > > + .pads_refclk_cfg0 = 0xfa5cfa5c, > > > > > > + .pads_refclk_cfg1 = 0xfa5cfa5c, > > > > > > .has_pex_clkreq_en = true, > > > > > > .has_pex_bias_ctrl = true, > > > > > > .has_intr_prsnt_sense = true, > > > > > > @@ -2102,6 +2097,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = { > > > > > > .msi_base_shift = 8, > > > > > > .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, > > > > > > .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, > > > > > > + .pads_refclk_cfg0 = 0x44ac44ac, > > > > > > .has_pex_clkreq_en = true, > > > > > > .has_pex_bias_ctrl = true, > > > > > > .has_intr_prsnt_sense = true, > > > > > > > > > > I think it'd be nice to have these decoded into their individual fields, > > > > > to reduce the magic. We already define the register fields, so it seems > > > > > sensible to use them. > > > > > > > > I did consider that. However, the specification from the ASIC team is always > > > > the raw values. Decoding them into bitfields is only going to make it harder > > > > to verify whether the correct values are present (since the reader has to > > > > manually expand the math), and introduce the possibility of errors during > > > > the expansion process. I think using raw numbers is better in this case. > > > > > > Alright, fine with me: > > > > > > Acked-by: Thierry Reding <treding@nvidia.com> > > > > Hi Bjorn, > > > > I do have a couple of other patches, mostly minor cleanup and prep-work > > for 64-bit ARM support, that I'd like to get into v4.8. Would you mind > > if I took Stephen's patches into a branch and send it all out via pull > > request after it passed testing? > > Hi Theirry, > > Bjorn is on holiday and will be back at the beginning of the v4.8 merge > window, assuming everything sticks to a regular schedule. I expect > that anything that consolidates and prioritizes potential v4.8 content > for easy evaluation on his return would be appreciated. Thanks, Okay, thanks for letting me know. Thierry
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c index c388468c202a..74887fedc3d4 100644 --- a/drivers/pci/host/pci-tegra.c +++ b/drivers/pci/host/pci-tegra.c @@ -228,15 +228,6 @@ #define PADS_REFCLK_CFG_PREDI_SHIFT 8 /* 11:8 */ #define PADS_REFCLK_CFG_DRVI_SHIFT 12 /* 15:12 */ -/* Default value provided by HW engineering is 0xfa5c */ -#define PADS_REFCLK_CFG_VALUE \ - ( \ - (0x17 << PADS_REFCLK_CFG_TERM_SHIFT) | \ - (0 << PADS_REFCLK_CFG_E_TERM_SHIFT) | \ - (0xa << PADS_REFCLK_CFG_PREDI_SHIFT) | \ - (0xf << PADS_REFCLK_CFG_DRVI_SHIFT) \ - ) - struct tegra_msi { struct msi_controller chip; DECLARE_BITMAP(used, INT_PCI_MSI_NR); @@ -252,6 +243,8 @@ struct tegra_pcie_soc_data { unsigned int msi_base_shift; u32 pads_pll_ctl; u32 tx_ref_sel; + u32 pads_refclk_cfg0; + u32 pads_refclk_cfg1; bool has_pex_clkreq_en; bool has_pex_bias_ctrl; bool has_intr_prsnt_sense; @@ -839,10 +832,9 @@ static int tegra_pcie_phy_enable(struct tegra_pcie *pcie) pads_writel(pcie, value, soc->pads_pll_ctl); /* Configure the reference clock driver */ - value = PADS_REFCLK_CFG_VALUE | (PADS_REFCLK_CFG_VALUE << 16); - pads_writel(pcie, value, PADS_REFCLK_CFG0); + pads_writel(pcie, soc->pads_refclk_cfg0, PADS_REFCLK_CFG0); if (soc->num_ports > 2) - pads_writel(pcie, PADS_REFCLK_CFG_VALUE, PADS_REFCLK_CFG1); + pads_writel(pcie, soc->pads_refclk_cfg1, PADS_REFCLK_CFG1); /* wait for the PLL to lock */ err = tegra_pcie_pll_wait(pcie, 500); @@ -2078,6 +2070,7 @@ static const struct tegra_pcie_soc_data tegra20_pcie_data = { .msi_base_shift = 0, .pads_pll_ctl = PADS_PLL_CTL_TEGRA20, .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_DIV10, + .pads_refclk_cfg0 = 0xfa5cfa5c, .has_pex_clkreq_en = false, .has_pex_bias_ctrl = false, .has_intr_prsnt_sense = false, @@ -2090,6 +2083,8 @@ static const struct tegra_pcie_soc_data tegra30_pcie_data = { .msi_base_shift = 8, .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, + .pads_refclk_cfg0 = 0xfa5cfa5c, + .pads_refclk_cfg1 = 0xfa5cfa5c, .has_pex_clkreq_en = true, .has_pex_bias_ctrl = true, .has_intr_prsnt_sense = true, @@ -2102,6 +2097,7 @@ static const struct tegra_pcie_soc_data tegra124_pcie_data = { .msi_base_shift = 8, .pads_pll_ctl = PADS_PLL_CTL_TEGRA30, .tx_ref_sel = PADS_PLL_CTL_TXCLKREF_BUF_EN, + .pads_refclk_cfg0 = 0x44ac44ac, .has_pex_clkreq_en = true, .has_pex_bias_ctrl = true, .has_intr_prsnt_sense = true,