diff mbox series

[06/14] serial: tegra: report error to upper tty layer

Message ID 1565609303-27000-7-git-send-email-kyarlagadda@nvidia.com
State New
Headers show
Series serial: tegra: Tegra186 support and fixes | expand

Commit Message

Krishna Yarlagadda Aug. 12, 2019, 11:28 a.m. UTC
Report overrun/parity/frame/break errors to top tty layer. Add support
to ignore break character if IGNBRK is set.

Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com>
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
---
 drivers/tty/serial/serial-tegra.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

Comments

Thierry Reding Aug. 13, 2019, 9:52 a.m. UTC | #1
On Mon, Aug 12, 2019 at 04:58:15PM +0530, Krishna Yarlagadda wrote:
> Report overrun/parity/frame/break errors to top tty layer. Add support
> to ignore break character if IGNBRK is set.
> 
> Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com>
> Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
> ---
>  drivers/tty/serial/serial-tegra.c | 19 ++++++++++++++++---
>  1 file changed, 16 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
> index f6a3f4e..7ab81bb 100644
> --- a/drivers/tty/serial/serial-tegra.c
> +++ b/drivers/tty/serial/serial-tegra.c
> @@ -374,13 +374,21 @@ static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup,
>  			tup->uport.icount.frame++;
>  			dev_err(tup->uport.dev, "Got frame errors\n");
>  		} else if (lsr & UART_LSR_BI) {
> -			dev_err(tup->uport.dev, "Got Break\n");
> -			tup->uport.icount.brk++;
> -			/* If FIFO read error without any data, reset Rx FIFO */
> +			/*
> +			 * Break error
> +			 * If FIFO read error without any data, reset Rx FIFO
> +			 */
>  			if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE))
>  				tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR);
> +			if (tup->uport.ignore_status_mask & UART_LSR_BI)
> +				return TTY_BREAK;
> +			flag = TTY_BREAK;
> +			tup->uport.icount.brk++;
> +			dev_err(tup->uport.dev, "Got Break\n");

I know this is preexisting, but why do we want to output an error
message in these cases. Isn't it perfectly legal for this to happen?

Thierry

>  		}
> +		uart_insert_char(&tup->uport, lsr, UART_LSR_OE, 0, flag);
>  	}
> +
>  	return flag;
>  }
>  
> @@ -562,6 +570,9 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
>  			break;
>  
>  		flag = tegra_uart_decode_rx_error(tup, lsr);
> +		if (flag != TTY_NORMAL)
> +			continue;
> +
>  		ch = (unsigned char) tegra_uart_read(tup, UART_RX);
>  		tup->uport.icount.rx++;
>  
> @@ -1224,6 +1235,8 @@ static void tegra_uart_set_termios(struct uart_port *u,
>  	/* Ignore all characters if CREAD is not set */
>  	if ((termios->c_cflag & CREAD) == 0)
>  		tup->uport.ignore_status_mask |= UART_LSR_DR;
> +	if (termios->c_iflag & IGNBRK)
> +		tup->uport.ignore_status_mask |= UART_LSR_BI;
>  
>  	spin_unlock_irqrestore(&u->lock, flags);
>  }
> -- 
> 2.7.4
>
Krishna Yarlagadda Aug. 27, 2019, 9:29 a.m. UTC | #2
> -----Original Message-----
> From: Thierry Reding <thierry.reding@gmail.com>
> Sent: Tuesday, August 13, 2019 3:22 PM
> To: Krishna Yarlagadda <kyarlagadda@nvidia.com>
> Cc: gregkh@linuxfoundation.org; robh+dt@kernel.org; 
> mark.rutland@arm.com; Jonathan Hunter <jonathanh@nvidia.com>; Laxman 
> Dewangan <ldewangan@nvidia.com>; jslaby@suse.com; linux- 
> serial@vger.kernel.org; devicetree@vger.kernel.org; linux- 
> tegra@vger.kernel.org; linux-kernel@vger.kernel.org; Shardar Mohammed 
> <smohammed@nvidia.com>
> Subject: Re: [PATCH 06/14] serial: tegra: report error to upper tty 
> layer
> 
> On Mon, Aug 12, 2019 at 04:58:15PM +0530, Krishna Yarlagadda wrote:
> > Report overrun/parity/frame/break errors to top tty layer. Add 
> > support to ignore break character if IGNBRK is set.
> >
> > Signed-off-by: Shardar Shariff Md <smohammed@nvidia.com>
> > Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
> > ---
> >  drivers/tty/serial/serial-tegra.c | 19 ++++++++++++++++---
> >  1 file changed, 16 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/tty/serial/serial-tegra.c
> > b/drivers/tty/serial/serial-tegra.c
> > index f6a3f4e..7ab81bb 100644
> > --- a/drivers/tty/serial/serial-tegra.c
> > +++ b/drivers/tty/serial/serial-tegra.c
> > @@ -374,13 +374,21 @@ static char tegra_uart_decode_rx_error(struct
> tegra_uart_port *tup,
> >  			tup->uport.icount.frame++;
> >  			dev_err(tup->uport.dev, "Got frame errors\n");
> >  		} else if (lsr & UART_LSR_BI) {
> > -			dev_err(tup->uport.dev, "Got Break\n");
> > -			tup->uport.icount.brk++;
> > -			/* If FIFO read error without any data, reset Rx FIFO
> */
> > +			/*
> > +			 * Break error
> > +			 * If FIFO read error without any data, reset Rx FIFO
> > +			 */
> >  			if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE))
> >  				tegra_uart_fifo_reset(tup,
> UART_FCR_CLEAR_RCVR);
> > +			if (tup->uport.ignore_status_mask & UART_LSR_BI)
> > +				return TTY_BREAK;
> > +			flag = TTY_BREAK;
> > +			tup->uport.icount.brk++;
> > +			dev_err(tup->uport.dev, "Got Break\n");
> 
> I know this is preexisting, but why do we want to output an error 
> message in these cases. Isn't it perfectly legal for this to happen?
> 
> Thierry
> 
It is valid to have breaks for sysrq requests. But they also indicate possible mismatch in baud rate. So warning user as this could be potential issue. I will change this to dev_dbg to avoid spamming user in valid cases.

KY
> >  		}
> > +		uart_insert_char(&tup->uport, lsr, UART_LSR_OE, 0, flag);
> >  	}
> > +
> >  	return flag;
> >  }
> >
> > @@ -562,6 +570,9 @@ static void tegra_uart_handle_rx_pio(struct
> tegra_uart_port *tup,
> >  			break;
> >
> >  		flag = tegra_uart_decode_rx_error(tup, lsr);
> > +		if (flag != TTY_NORMAL)
> > +			continue;
> > +
> >  		ch = (unsigned char) tegra_uart_read(tup, UART_RX);
> >  		tup->uport.icount.rx++;
> >
> > @@ -1224,6 +1235,8 @@ static void tegra_uart_set_termios(struct
> uart_port *u,
> >  	/* Ignore all characters if CREAD is not set */
> >  	if ((termios->c_cflag & CREAD) == 0)
> >  		tup->uport.ignore_status_mask |= UART_LSR_DR;
> > +	if (termios->c_iflag & IGNBRK)
> > +		tup->uport.ignore_status_mask |= UART_LSR_BI;
> >
> >  	spin_unlock_irqrestore(&u->lock, flags);  }
> > --
> > 2.7.4
> >
diff mbox series

Patch

diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index f6a3f4e..7ab81bb 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -374,13 +374,21 @@  static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup,
 			tup->uport.icount.frame++;
 			dev_err(tup->uport.dev, "Got frame errors\n");
 		} else if (lsr & UART_LSR_BI) {
-			dev_err(tup->uport.dev, "Got Break\n");
-			tup->uport.icount.brk++;
-			/* If FIFO read error without any data, reset Rx FIFO */
+			/*
+			 * Break error
+			 * If FIFO read error without any data, reset Rx FIFO
+			 */
 			if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE))
 				tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR);
+			if (tup->uport.ignore_status_mask & UART_LSR_BI)
+				return TTY_BREAK;
+			flag = TTY_BREAK;
+			tup->uport.icount.brk++;
+			dev_err(tup->uport.dev, "Got Break\n");
 		}
+		uart_insert_char(&tup->uport, lsr, UART_LSR_OE, 0, flag);
 	}
+
 	return flag;
 }
 
@@ -562,6 +570,9 @@  static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
 			break;
 
 		flag = tegra_uart_decode_rx_error(tup, lsr);
+		if (flag != TTY_NORMAL)
+			continue;
+
 		ch = (unsigned char) tegra_uart_read(tup, UART_RX);
 		tup->uport.icount.rx++;
 
@@ -1224,6 +1235,8 @@  static void tegra_uart_set_termios(struct uart_port *u,
 	/* Ignore all characters if CREAD is not set */
 	if ((termios->c_cflag & CREAD) == 0)
 		tup->uport.ignore_status_mask |= UART_LSR_DR;
+	if (termios->c_iflag & IGNBRK)
+		tup->uport.ignore_status_mask |= UART_LSR_BI;
 
 	spin_unlock_irqrestore(&u->lock, flags);
 }