[V4,1/8] phy: tegra: xusb: t210: add XUSB dual mode support

Configure the port capabilities based on usb_dr_mode settings.

Based on work by JC Kuo <jckuo@nvidia.com>.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
 drivers/phy/tegra/xusb-tegra210.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

On Mon, Jun 10, 2019 at 03:49:02PM +0530, Nagarjuna Kristam wrote:
> Configure the port capabilities based on usb_dr_mode settings.
> 
> Based on work by JC Kuo <jckuo@nvidia.com>.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
> Reviewed-by: JC Kuo <jckuo@nvidia.com>
> Acked-by: Thierry Reding <treding@nvidia.com>
> ---
>  drivers/phy/tegra/xusb-tegra210.c | 22 +++++++++++++++++++---
>  1 file changed, 19 insertions(+), 3 deletions(-)

Tiny nit-pick on patches 1-3 in case you're going to resend: You may
want to make the subject consistent with existing changes to this
driver. We don't usually use a SoC generation prefix in the commit
subject, so this looks somewhat out of place. I think it'd be more
consistent to do something like:

	phy: tegra: xusb: Add XUSB dual mode support on Tegra210

Note also that the subject should start with a capital letter after the
prefix. Also, please try to avoid abbreviating TegraXYZ to {t,T}XYZ
because it helps when doing some archaeology on the repository. That is,
it is easier to just:

	$ git grep -i tegraXYZ"

than both of:

	$ git grep -i tegraXYZ
	...
	$ git grep -i tXYZ

Anyway, probably not worth resending just for this, but perhaps keep
these guidelines in mind for future submissions.

Thanks for the good work on these patches!

Thierry

> diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
> index 05bee32..4beebcc 100644
> --- a/drivers/phy/tegra/xusb-tegra210.c
> +++ b/drivers/phy/tegra/xusb-tegra210.c
> @@ -1,5 +1,5 @@
>  /*
> - * Copyright (c) 2014, NVIDIA CORPORATION.  All rights reserved.
> + * Copyright (c) 2014-2019, NVIDIA CORPORATION.  All rights reserved.
>   * Copyright (C) 2015 Google, Inc.
>   *
>   * This program is free software; you can redistribute it and/or modify it
> @@ -47,7 +47,10 @@
>  #define XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_XUSB 0x1
>  
>  #define XUSB_PADCTL_USB2_PORT_CAP 0x008
> +#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(x) (0x0 << ((x) * 4))
>  #define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(x) (0x1 << ((x) * 4))
> +#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(x) (0x2 << ((x) * 4))
> +#define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(x) (0x3 << ((x) * 4))
>  #define XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(x) (0x3 << ((x) * 4))
>  
>  #define XUSB_PADCTL_SS_PORT_MAP 0x014
> @@ -72,6 +75,7 @@
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(x) (0x084 + (x) * 0x40)
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT 7
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK 0x3
> +#define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL 0x1
>  #define XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18 (1 << 6)
>  
>  #define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x088 + (x) * 0x40)
> @@ -965,7 +969,14 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
>  
>  	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
>  	value &= ~XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_MASK(index);
> -	value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
> +	if (port->mode == USB_DR_MODE_UNKNOWN)
> +		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DISABLED(index);
> +	else if (port->mode == USB_DR_MODE_PERIPHERAL)
> +		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_DEVICE(index);
> +	else if (port->mode == USB_DR_MODE_HOST)
> +		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_HOST(index);
> +	else if (port->mode == USB_DR_MODE_OTG)
> +		value |= XUSB_PADCTL_USB2_PORT_CAP_PORTX_CAP_OTG(index);
>  	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
>  
>  	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
> @@ -997,7 +1008,12 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
>  			     XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
>  	value &= ~(XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_MASK <<
>  		   XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT);
> -	value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +	if (port->mode == USB_DR_MODE_HOST)
> +		value |= XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_FIX18;
> +	else
> +		value |=
> +		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_VAL <<
> +		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPAD_CTL1_VREG_LEV_SHIFT;
>  	padctl_writel(padctl, value,
>  		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
>  
> -- 
> 2.7.4
>